192.168.0.1 - Entrance to the router. 192.168.0.1 Admin Admin Go to the Personal Cabinet

If you do not know how to go to the settings of your router or you can't do it, you hit the right address. So, 192.168.0.1 It is a unique electronic IP address of your device (router or modem) on the Internet between it and PC. The subnet used here is indicated as 192.168.0.x, when X is a number from 1 to 254. Your PC also has its own network address. To access the router, it is necessary that the computer's IP address is also located on the network 192.168.0.x and in the range - 2-254. Please note that the network does not have several devices that have the same IP address - this would lead to their conflict.

Go to 192.168.0.1 Admin / Admin

The router serves as independent network equipment having its own operating system. You can configure it using a telnet interface or an Internet interface. In the first case, we are talking about the instrument's command console - the router settings interface is more complicated. If you are not too an experienced user, use the second option. His address - enter it in your browse.

If you refuse to enter, make sure that you are registered with the IP address.

Features of appointment of the IP address for the entry at 192.168.0.1

We go to the "Network and Common Access Control Center", then click on the "Network Connections" icon. For speed you can click simultaneously " Win + R." In the Fast window "Run", specify the CONTROL NETCONNECONS command

Click the "ENTER" key or click OK. Click the connection through which the router is connected and click on it right key mouse:

In the properties in the Select Connection Components menu twice click on " Internet Protocol version 4 (TCP / IPv4)»

Usually, the default is set as follows:

Did not work in 192.168.0.1? In most cases, this is talking about disconnected on the router. DHCP server.. So, you will need to manually register the IP address. Feature Pictures:

The address should be located within 192.168.0.2 to 192.168.0.254. Do not forget about the requirement to specify an IP address as a "main gateway". Moreover, 192.168.0.1 You need to specify as a "preferred DNS server". Click the "OK" key.

If you cannot log in to the TP-link or D-link technique by http://192.168.0.1. With any LAN port, you need to check access from other ports. Alternately connect the patch cord for each of them. Sometimes it turns out that a specific Ethernet connector was configured in the bridge mode under the body console.

Among the manufacturers of the network technology, the specified IP address for its technology is usually chosen only by the D-Link concerns and sometimes NetGear.

Issues with the entrance to the personal account of the router

Did you fulfill all actions right? However, can you contact Admin login and password to enter 192.168.0.1? You will use the advice "". The list of actions is similar, but you need to use the subnet 192.168.0.0/24.

Short list of actions:

If nothing helps?

In this case, you can recommend only one thing. Note that this method is the most extreme. We are talking about the hardware reset of all settings and characteristics of the equipment. You can perform the necessary actions by clicking on a small button. Reset.. It is a hole and is located on the rear panel of the device.

Take advantage of the toothpick or take the clip, and when the router is running, hush it for 15 seconds. As soon as you begin to perform these actions, the device must wink to you on the front part of the indicators and go to the reboot mode.

After you follow this advice, any parameters of the device will be reset and the router will return to its factory characteristics.