IMAX B6 charger operating manual. IMAX B6 mini. Charging a car battery - full instruction. Build a charge-discharge schedules in Log View

2014-08-26T03: 49: 39 + 03: 00

If you at least once a question about the acquisition of a universal charger, which is able to charge all the main types of batteries, then you probably came across the legendary IMAX B6 charger.

Today we are glad to introduce a new reincarnation of this charger, which has decreased significantly in the amount, but overtook modern functionality, which will appreciate both old and new fans of the B6 series chargers. So, we celebrate the kid - ...

Skyrc B6 mini is a new version The most sold in the world of the universal charger IMAX B6.

Charger and Monitoring through Smartphones

Using an additional WiFi module, which is purchased separately and can be fed to the charger, you can control the charger and monitor the status of batteries in real time

Specifications IMAX B6 MINI

• Source supply voltage direct current (DC): 11-18V
• Maximum charge power: 60w
• Maximum discharge power: 5w
• Charge current range: 0.1-6A
• Discredition current range: 0.1-2A

• Charge voltage:
  - for Ni-MH / NiCD - is determined automatically
  - for Li-Po - 4.18-4.3V / element
  - for Li-Ion - 4.08-4.2V / element
  - for Li-Fe - 3.58-3.7V / element

• The voltage interruption of the charge in the range:
  - Ni-MH / Nicd: 0.85-1.0V / element
  - Li-PO: 3.0V / Element
  - Li-Ion: 2.5V / Element
  - Li-Fe: 2.0V / element
  - PB: 1.75V

• Lithium element balancing current: 300mA per item
• Delta PEAK sensitivity for NiCD and Ni-MH items: adjustable in the range of 3-15mV per element
• Charge / discharge interrupt temperature setting: 20-80ºC
• Overall dimensions: 102 x 84 x 29 mm
• Weight: 233

EQUIPMENT

• Charger
• Power connectors for charging batteries (T-plug + crocodiles)
• Connectors for charging onboard batteries with JST plumbing (BEC), JR / Futaba / Hitec
• JST-XH balancing connector (for 2-6s batteries)
• Wire for charging
• Instruction

Instruction

Instructions for the Charger Skyrc Imax B6 Mini can download ...

Where to buy an IMAX B6 Mini charger?

Buy compact universal charger Skyrc Imax B6 MINI For all types of batteries, you can in the company 2A3A ...

IMAX B6 was purchased by me for $ 12.23. The seller sent Hong Kong by my request, for which I had to pay a little, but it was worth it, the delivery is faster than through logistics companies. I ordered, in the delivery process was tracked by Hong Kong Post, and Russian Post. Before the post office, IMAX B6 traveled only 12 days from the date of payment.

Instruction and setup during operation

The charging and balancing device was acquired for servicing numerous batteries and batteries of different types of meters operated.

By description, the charging and ballastic device can be serviced NICD, Nimn., Liion., Lipol, PB Akb, but in practice it copes well with the relatively new types of batteries - Nizn..

Appearance

Charging process is performed in the "Auto" or manual mode. In the "Auto" mode, only the maximum current is set, the charger during the cycle changes according to a predetermined algorithm for each type of elements, while in manual mode The specified current is constant during the entire cycle.

You can test the real capacitance of elements. Nutrition from external source 12-18 volts voltage. Management is carried out with only four metal buttons. In the settings, you can write to the memory of the device 5, or before connecting the battery, set a new mode of operation.

It is possible to disable the charging process when a certain temperature is reached on the battery (when the temperature sensor is connected to the kit), after some time (up to 4 hours or not to control the time), upon reaching a specific charge current, turn on / off the beep.

During operation on the LCD display, information about operation mode, voltage on the battery, charging current / discharge is displayed.

My device feeds from the laptop power unit. In the process of operation, the first business was redone the cords of the weekend, since running in the kit are not applicable, there are no such connectors (except crocodiles). This is perhaps the only thing that did not like it, but perhaps only me.

Made cords for the technique that I charge (mostly children's toys) and adapted to battery compartments for charging 1-3 AA batteries, aaa.

Click to enlarge

In the NiCD training mode, Nimn managed to restore, however, not fully the performance of 4 of the 12 and elements. The balancing program is necessary when operating several successively connected LiIond, Lipol batteries, I did not use anything, I can not say anything.

Nizn.

Charging NIZN elements in IMAX B6 is not provided, but it is possible. The voltage of these elements is 1.6 V, which is somewhat larger than the NiCD voltage, Nimn (1.2V). Charging algorithm is identical. To connect, I use the battery compartment for 2 AA batteries, in the instrument exhibit the voltage 3, 6 V (3 elements). Charges, does not swear.

Car batteries

Use as a charger for lead batteries ...

Charged and charging the electric car with two 6 volt batteries, in the winter charged the car battery with a current 5 a. Very convenient error notification, not any code that should be sought in the table, but a text message, however, on a good english language.

Also, in winter in the frost, a little helped a regular generator of his priors, charging the car battery in the garage. I have a garage without heating, but IMAX perfectly endured the cold and not "capricious".

Review

In general, very satisfied. About NIZN batteries already wrote above and this is also a big plus! Externally looks high quality, but did not disassemble. Works without failures and breakdowns have been here for several months, and in skillful hands so generally provides a whole range of possibilities! All error messages, the completion of the working cycle and other messages are accompanied by a beep.

Where can one buy

You can buy on the Aliexpress software. Please note: You should buy only the original IMAX B6 product, for which we look at the heading of the goods. If "Original" is written there, it means everything is fine. The fact is that the Aliexpress rules themselves for sellers and stores prohibit it to sell a fake indicating originality, thereby deceiving buyers.

In the event of a violation of this rule, they will pay a big penalty or will lose their account with all the funds not paid. So the sellers of fakes simply usually do not write anything about the origin of products, but the sellers of original products will necessarily observe it in the title and description!

Comparison of the original and fake

Video review

Size: px.

Start showing from page:

Transcript.

1 User Manual IMAX B6 Charger Specifications: Battery charge Li-Ion, Li-Po, Life, NiCD, NIMH, PBACID (lead all types) fully automatic charge controlled microcontroller. Current and voltage cutoff for lithium batteries, on temperature and ΔV for nickel. For all types, turn off at maximum time and capacity. Training NICD and NIMH. Balancing charge Li-Po batteries (for batteries with several banks) charge current up to 5a, discharge up to 1A. Screen with the readings of the current voltage, current, container. Unloading all these parameters to the computer and the construction of graphs.

2 Contents 2 Purpose Buttons and Charger Connectors Charging Power PB Batteries Charging Power Lipo Batteries Charging Akb Control Panel Futaba 6EX Charging Akb Control Panel Hitech / GR Memo for PB + Lipo Memo for Life

3 Purpose of the buttons and charger connectors 3

4 Charging power PB batteries 4 This instruction contains short description Concerning only the battery, which is completed with the Karpmaster product. 1. Connect the 220 / 12V power supply into the charger socket. If you are in the field of the special car from the car's car. ATTENTION: Observe the polarity when connecting the "crocodile" connectors to the car's battery, as this can output the charger. 2. Charge the PB 12V 7000MA power Akb. 3. Use Batt program selection button. Type "Select the program: Program SELECT PB BATT 4. We once press the" Start "button enter the following menu: Charge Charging. PB Charge 2.0a 12.0V (6p) 5. We check the parameters for the PB 12V 7000MA battery, the charging current must not exceed no more than 2.0a. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set with the parameters of the battery, press the "Start" button hold it 3 seconds. Battery Type Battery Shipping Battery PB-6 2.0A 12.00V CHG 000: Charging MA Charging Time Scored during Account Charge 6. After a complete charge of the battery, the charger submits sound signal And independently stops the charging process. This type of battery is charged about three and a half hours (210min). Full full 0.0A 14.7V 002: The information on the display will be saved until you disable the charging acb.

5 Charging the power Lipo batteries 5 1. Charge the power Akb Lipo 11.1V 5000MA. 2. Button for selecting "BATT. Type "Select the program: Program Select Lipo Batt 3. We once press the" Start "button enter the next menu: Charge Charging. Lipo Charge 3.0a 11.1V (3S) 4. Check the parameters for the LIPO 11.1V 5000MA battery, the charging current should not exceed not more than 3.0A. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode. Battery type Installed on the charger Battery connected to the charger Confirmation R: 3SER S: 3SER Confirm (Enter) With the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Battery Lipo 3.0a 11.10V CHG 000: Charging Charging Time MA Scored During Account Charge

6 5. After the complete charge of the battery, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 12.5V 001: The information on the display will be saved until you disable the charging acb. This type of battery requires balancing depending on the operating conditions 1. To balancing the battery, further connect the balancing cable from the battery to the charger to the charger, to the corresponding 3S balancing socket. 2. Button for selecting "BATT. Type "Select the program: Program Select Lipo Batt 3. We once press the" Start "button enter the next menu: Charge Charging. LIPO CHARGE 3.0A 11.1V (3S) 4. Press the "INT." Button once We enter the Balance menu. Lipo Balance 3.0a 11.1V (3S) 5. We check the parameters for the LIPO 11.1V 5000MA battery, the charging current should not exceed no more than 3.0A. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode. 6 Battery Type Mounted on Charger Battery Connected to Charger Confirmation R: 3SER S: 3SER Confirm (ENTER)

7 6. Hold the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Battery Li3S 3.0a 11.10v Bal 000: Charging MA Charging Time Scored during Account 7. During Charging by clicking the "Inc" button, you can see the charge for each battery item separately. Lipo 11.1V 5000mA 3S consists of three elements V 4.20V V 0.00V Normally balanced battery must be 4.20V per each element. ATTENTION: You can not discharge the battery below 3V per element and below 9V on the entire battery, as this can take the battery. Attention: Do not leave Lipo Akb during charge unattended, since this type of battery is explosive. 8. After fully balancing the AKB, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 12.5V 001: The information on the display will be saved until you disable the charging acb. 7.

8 Charging the battery control panel of Futaba 6EX 8 1. Connect the 220 / 12V power supply into the charger socket. If you are in the field of the special car from the car's car. ATTENTION: Observe the polarity when connecting the "crocodile" connectors to the car's battery, as this can output the charger. 2. Earn power Akb Lipo 11.1V 1450MA 3S. 3. Use Batt program selection button. Type "Select the program: Program SELECT Lipo Batt 4. Single Press the" Start "button in the next menu: Charge Charging. Lipo Charge 1.5A 11.1V (3S) 5. We check the parameters for the Lipo 11.1V 1450MA battery, the charging current should not exceed no more than 1.5a. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode. Battery type Installed on the charger Battery connected to the charger Confirmation R: 3SER S: 3SER Confirm (Enter) With the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Battery Lipo 1.5A 11.10V CHG 000: Charging MA Charging Time Scored during Account Charge

9 6. After the complete charge of the battery, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 12.5V 001: The information on the display will be saved until you disable the charging acb. This type of battery requires balancing depending on the operating conditions 1. To balancing the battery, further connect the balancing cable from the battery to the charger to the charger, to the corresponding 3S balancing socket. 2. Button for selecting "BATT. Type "Select the program: Program Select Lipo Batt 3. We once press the" Start "button enter the next menu: Charge Charging. Lipo Charge 1.5A 11.1V (3S) 4. Press the "INT." Button once We enter the Balance menu. Lipo Balance 1.5A 11.1V (3S) 5. We check the parameters for the LIPO 11.1V 1450MA battery, the charging current should not exceed no more than 1.5a. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode. 9 Battery Type Mounted on the Battery Charger Connected to the Charger Confirmation R: 3Ser S: 3SER Confirm (ENTER)

10 6. Hold the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Li3S 1.5A Battery Shipping Battery LI3S 1.5A 11.10V BAL 000: Charging MA Charging Time Scored During Account 7. When charging, clicking the "Inc" button, you can see the charge for each battery item separately. Lipo 11.1V 1450mA 3S consists of three elements V 4.20V V 0.00V Normally balanced battery must be 4.20V per each element. ATTENTION: You can not discharge the battery below 3V per element and below 9V on the entire battery, as this can take the battery. Attention: Do not leave Lipo Akb during charge unattended, since this type of battery is explosive. 8. After fully balancing the AKB, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 12.5V 001: The information on the display will be saved until you disable the charging acb. 10

11 Charging the control panel of the HITECH / GR control panel Connect the power supply unit 220 / 12V in the charger socket. If you are in the field of the special car from the car's car. ATTENTION: Observe the polarity when connecting the "crocodile" connectors to the car's battery, as this can output the charger. 2. Charge the LIFE 9.9V 1500MA 3S panel acb. 3. Use Batt program selection button. Type "Select User Set - Setup: User Set Program-\u003e 4. Single the" Start "button once in the following menu: Lipo v.Type 3.7V 5. Single Press the Start button and the" Inc. "button once Select Life 3.3V LIFE V.Type 3.3V 6. Button "Batt. Type "Select Life Batt Program Select Life Batt 7. We once press the" START "button enter the following menu: LIFE CHARGE 1.5A 9.9V (3S) 8. We check the parameters for the LIFE 9.9V 1500mA battery, charging current should not exceed no more than 1.5 BUT. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode.

12 Battery type Installed on a charger Battery connected to a charger 12 Confirmation R: 3SER S: 3SER Confirm (ENTER) Hold the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Battery Life 1.5A 9.90V CHG 000: Charging MA Charging Time Scored During Account 9. After the battery is complete, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 10.2V 001: The information on the display will be saved until you disable the charging acb. This type of battery requires balancing depending on the operating conditions 1. To balancing the battery, further connect the balancing cable from the battery to the charger to the charger, to the corresponding 3S balancing socket. 2. Button for selecting "BATT. Type "Select User Set - Setup: User Set Program-\u003e 3. We once press the" START "button enter the following menu: Lipo v.Type 3.7V

13 4. Press the "Start" button once and the "Inc." button Select Life 3.3V Life v.Type 3.3V 5. Button "Batt. Type "Select Life Batt Program Select Life Batt 6. We once press the" Start "button enter the following menu: LIFE BALANCE 1.5A 9.9V (3S) 7. We check the parameters for the LIFE 9.9V 1500mA battery, charging current should not exceed no more than 1.5 BUT. If the settings are not coincided with the parameters of the AKB, press the "Start" button and the "Dec." buttons and "Inc." Choose the necessary charge current and voltage Akb. If the settings are set to the AKB parameters, press the "Start" button hold it 3 seconds, the charger will enter the check mode. 13 Battery type Mounted on a charger Battery connected to a charger Confirmation R: 3SER S: 3SER Confirm (Enter) With the "Start" button for another 3 seconds, the device will enter the charging mode. Battery Type Battery Shipping Battery Life 1.5A 9.90V BAL 000: Charging MA Charging Time, scored during Account 8. After the battery is complete, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge.

14 Full Full 0.0a 10.2V 001: The information on the display will be saved until you disable the charged battery. 9. During charging by clicking the "Inc" button, you can see the charge for each battery item separately. Life 9.9V 1500mA 3S consists of three elements V 3.26V V 0.00V Normally balanced battery must be 3.30V per element. Attention: You can not discharge the acb below 2.0V per element and below 6.0V on the entire battery, as it can take the battery. Attention: Do not leave Life Akb during charge unattended, since this type of battery is explosive. 8. After fully balancing the AKB, the charger gives a beep and independently stops the charging process. This type of battery is charged about min depending on the discharge. Full full 0.0a 9.9v 001: The information on the display will be saved until you disable the charging acb.

15 Memo for PB + Lipo 15 Observe polarity when connecting batteries, because This can output a charger. PB 7000 MAH power Akb can be reduced, can not be discharged 100% and leave without charge after operation, because This may be out of order. Power Akb Lipo 5000mAh (3S) can be reduced, can not be discharged below 9V and leave without charge after operation, because This may be out of order. This type Akb requires balancing. Your ship is equipped with the following battery: PB 7000mAh 12V power charging current 1.0A, maximum current 2.0a. (You can reflect) Power Akb Lipo 5000mAh (3S) 11.1V Charge Current 3.0A. You can not discharge below 9v. Balancing is required. (There is no memory effect, you can reflect the transmitter battery (remote control) Lipo 1450mAh 11.1V charge current 1.0a. You can not discharge below 9v. Balancing is required. (There is no memory effect, you can reflect)

16 Memo for LIFE 16 Observe the polarity when connecting the batteries, because This can output a charger. PB 7000 MAH power Akb can be reduced, can not be discharged 100% and leave without charge after operation, because This may be out of order. Power Akb Lipo 5000mAh (3S) can be reduced, can not be discharged below 9V and leave without charge after operation, because This may be out of order. This type of battery is required balancing. Your ship is equipped with the following battery: PB 7000mAh 12V power charging current 1.0A, maximum current 2.0a. (You can reflect) Power Akb Lipo 5000mAh (3S) 11.1V Charge Current 3.0A. You can not discharge below 9V. Balancing is required. (There is no memory effect, you can reflect the transmitter battery (remote control) Life 1500mAh 9.9V charge current 1.5A. You can not discharge below 9V. Balancing is required. (It does not have a memory effect, you can reflect) Battery LIFE 1800mAh 9.9V 7.9V Current 1.8A. You can not discharge below 9v. Balancing is required. (There is no memory effect, you can reflect)

Charging power Lipo 1. Charge the power Akb Lipo 11.1V 5000mA. 2. Button for selecting "BATT. Type »Select the program: 3. We once press the" Start "button in the following menu: 3.0A 11.1V (3S)

Kokam Power Master User Guide 1. Introduction. Thank you for buying a charger. This device is intended for charging, discharge and training of batteries of radio-controlled

X100 Prepared in the company Hobbies Center, 2016 Safety and Warning Safety Tips and Safety Tips are very important. Please follow instructions to ensure

DureMax Logic-Pro DX-5 Microprocessor Multifunctional Charger Operating Instructions LLC "Hobbycenter.ru" 2003-2008 Warranty Manufacturer guarantees the absence of assembly defects and

Manual [Email Protected] www.ansmann-racing.com Intelligent Digital Ballastic Charger Xbase 2.0 SE Operation Manual Content 1. Technical

Www.toyhobby.ru IMAX B6 Microprocessor Charger with Built-in Balancer Features - Intellectual control Processes in the charger implemented a function automatic installation

Multiplex Multicharger LN-5014 MultiPlex MultiCHARGER LN-5014 Operating Instructions Moscow Hobbies for All 2006 WWW.HOBBYFORYOU.RU Specifications: Input Voltage: 11 15 V. type of batteries,

User Guide Indicators Input Voltage Post. Tool 11-18V Per. 100-240V Charging Current A 0.1-10.0 Detection Current A 0.1-5,0 Power Charging W Max.90 Distribution Power W Max.20 Current Balancing

Four-channel charger Q6400AC 400W / 100 x 4 instruction Manufacturer is constantly working to improve the design and characteristics of its products, so some nodes and parts may differ

Instruction Manual C3 Contents Features Specifications Function Buttons Precautions Exterior Programming Scheme Charging Batteries Additional Information Posts by

Professional charger 2 in 1 with built-in IMAX B6AC V2 power supply prepared in the company Hobby Center, 2017 Congratulations on the choice of professional Skyrc B6ac Charger

Professional Charger 2 in 1 With built-in IMAX B6AC V2 power supply Congratulations on the selection of a professional SKYRC B6AC Charger version 2 with a built-in power supply and some

G.T. Power A6 Microprocessor Charger (NiCD / NIMH / Lithium / PB) with built-in Balancer Entry Specification Work voltage Maximum power consumption in the maximum charge mode

Instruction Instruction C4 Content 1. Features 2. Specifications 3. Button functions 4. Precautions 5. Appearance 6. Programming scheme 7. Battery charging 8. Additional

Digital Charger Uploading Microprocessor Universal Charger / Discharge Device "Pilotage Digital Charger / Discharger" Designed for maintenance 1 14 Elements

Instruction Instruction C1 Contents: 1. Features 2. Specifications 3. Button functions 4. Precautions 5. Appearance 6. Programming scheme 7. Battery charging 8. Additional

Contents Introduction 1 Features 2 Specifications 4 Connection Scheme for Charging Li-XXX Batteries 5 Security & Warning 6 Program Overview 11 Setting parameters (User Installation)

Features 1.1 Charger is designed in such a way as to provide multi-level protection against various incorrect operations and errors. 1.2 The product is widely used synchronous technology.

Operating Instructions OPUS BT-C100 Intelligent Charger for Ni-MH / Ni-CD, LI-ION and LIFEPO4 batteries with adjustable charge current and selection of the final charge voltage for

IMAX B6AC Charger Operation Manual Content Introduction Features Specification Battery Connection Scheme Key Warning and Security Rules Block Charger Scheme

B6 10 Professional balancing charger Fast and high-performance charger / discharge device with microprocessor control, built-in device balancing via USB port

Intelligent Digital Ballating Charger XBase 2.0 Deluxe Operation Manual [Email Protected] www.ansmann-racing.com Intelligent Digital Ballabic Charger

Intelligent Digital Balance Charger Intelligent Digital Balance Charger V-6AC User Manual 1. Features 1 2. Specifications 2 3. Device.2 4. Keys..2

Microprocessor Charger MK-II MULTICHARGER DCD-01 (NICD / NIMH / Lithium / PB) with a built-in Balancer General Description Microprocessor Charger MK-II MULTICHARGER DCD-01 (NICD / NIMH / Lithium / PB)

Charging / discharge device alternating current For lipo / life / lihv / lilo / niMH / NICD / PB (lithium-polymer, lithium-iron-sulfide, lithium-polymer high voltage, lithium-ion, nickel-metal-hydride,

X100 AC / DC Instruction New Charger X100 www.imaxrc.com/x100.html AC FUNCTION DC FUNCTION Touch Display 3.0 Inch Touch Display Makes Work More Comfortable 3.0 Inch Display 3.0

Professional Intelligent Digital Charger User Manual Introduction Introduction Thank you for purchasing B6 Pro charger from IMAXRC. This product represents

IMAX B6AC instruction in Russian \u003e\u003e\u003e IMAX B6AC instruction in Russian IMAX B6AC instruction in Russian with sizes, like a tutu cigarette, has a power of 150W, control in one encoder. In the calam kroibe naxooc

Computer Charger User Manual 1 Features: In the design of the s / y, an advanced actions algorithm and a multifunctional protection system for errors are applied. The device provides

Hyperion EOS 5i DP EOS5IDP-A with A123 battery mode User's Guide Powerful and easy to use Charger 1 Hyperion EOS 5I DP - EOS 5I DP User Guide - Characteristics

Universal computer s / y with the EOS0606i Balancer from Hyperion Features: - Work from DC source 11V-15B - Powerful and at the same time compact and portable, with a wide range of supported

Manual for the exploitation Balancing Charger XMOVE 2.0 Balancing Charger XBase 2.0 [Email Protected] www.ansmann-racing.com Xmove Balancing Chargers

Special thanks to Stanislav ( [Email Protected]) For translation! Mh_c9000 - Charger Description MN-C9000; - This device allows you to charge, determine the state and restore independently

Professional Intelligent Digital B6AC Pro Charger Built-in Power Supplies Prepared in Hobbies Center, 2016 Introduction Thank you for purchasing a charger

Operating instructions for analyzer ADS batteries. This professional analyzer is suitable for all battery types for mobile phones, digital cameras and digital video cameras. Content:

Operating Instructions for the Multifunction Start-Charger CARKU R MODEL: E-POWER-43 Protection against protection against protection against protection against reloading reverse reverse reverse reverse

Charging / discharge device with balancing and two types of power connections. For lipo / life / lilo / nimh / lihv / nicd / pb (lithium-polymer, lithium-sulfide, lithium-ion, nickel-metal hydride,

Professional Charger SKYRC SKYRC D200 with built-in balancer prepared in the company Hobbies Center, 2017 Congratulations on your purchase of a professional SKYRC Charger

Portable Handmade Mini GPS Compass Navigator with LCD screenohm for tourists and travelers. Introduction This portable mini GPS receiver with the LCD screen for tourists and travelers is designed to

Intelligent Charger for Ni-CD / NI-MH and Li-Ion Batteries OPUS BT-C3100 V2.2 Operating Instructions Purpose The device allows you to charge it independently from each other, discharge,

TABLE OF CONTENTS. Introduction 01 Features 03 WARNINGS AND SAFETY RULES 05 Block -Cham charger operation 08 Controls Controls 09 Working with device 10 Charging modes 13 Record parameters

Turnigy AccuCell-6 Charging-bit (with built-in balance sheet) Device for NiCD / NIMH / Lithium and lead-acid batteries Operation manual Thanks for the purchase of Turnigy, fast-charging

ENERGY Operating Instructions Model D28 Multifunction Starting Charger Designed to start automotive engines with onboard voltage 12V, charging various mobile

Migowatt E-POWER-43 GB / T -1- TECHNICAL DATA DIGITAL Display Indicator Charge Button Turns on the lamp switching on Output 12V To start the auto 12V10A USB output 5V2A Output flashlight sound indicator 15B1A

General features Delivery kit Bluetooth Force H1 Micro USB cable and USB storage case Fabric for wipes User's Guide 2 Playback / Pause Manual,

EPOWER ELITE: Pad inverter for cars, external battery and flashlight 1. Product Type: Starting Inverter for Car 2. Device Characteristics Capacity Built-in Battery: 12000 AC (44.4 W HU) Start

Migowatt E-POWER-43 GB / T Carku E-Power 43 available on zavedi-avtomobil.ru Carku E-Power 43 available on zavedi-avtomobil.ru -1carku E-POWER 43 available on zavedi-avtomobil.ru technical Data Data

Control point VER: 1.0 Penza 2014 1. Controls and indications Figure 1 Controls and indications are shown in Figure 1. Command time indicator 2 2. Command button 2 3. Display

160 West Camino Real # 233 Boca Raton, FL 33432 Phone: 954-642-8997 Fax: 954-636-3533 [Email Protected] www.optoelectronics.com 2009 OptoElectronics, Inc. Wireless Video Camera Detector VS

The charger allows you to quickly and optimally charge the batteries of the "AA" size container to 3000mAh. Combining the functions of charge, discharge, restoration and tank check, also having individual

Universal Power Supply with Emergency Running Function JA-PA20 Battery Capacity 13800 MAH Functions Emergency Starting Car Engine Even with Fully Discharged Battery

Radio-controlled fishing boat with echo sounder and gPS system. Jabo-5CG Functional Equipment Boat: - Selecting the depth of scanning with echo sounder - Saving the GPS coordinates - Search for GPS positions in automatic

Start-Charger AUTOTARTAR PRO MT2028 User Manual Start-Charger Table of Contents Table of Contents ... 3 1 Introduction ... 4 1.1 Basic Features of the device ... 4 2 Description of the device ...

Hyperion HK Ltd. Adding to the instruction manual EOS 0610I NET / DUO; Update programcatter support (PJSC) v1.6 Changes to EOS 0610i NET / DUO After upgrading to 1.6 (1) Update

In general, on the Internet and on this site there are many, both original SkyRC IMAX B6 and various clones and "variations on the topic". But I would like to tell you why you don't need it, why not buy SkyRC IMAX B6 and what to choose instead of it.

SKYRC IMAX B6 was designed under specific task - Charging the power model battery Li-Po and Li-Ion batteries, incl. In "field conditions", and under the rest of the tasks is adapted only conditionally.

Even in the instructions from the original SKYRC IMAX B6 there is only one picture about connecting batteries

But let's go about everything in order.

Bought in the store Bangud Charger Skyrc IMAX B6 arrived to me in this box

There are many different information on the reverse side, mainly that and where to connect

Inside the top box lay the instruction,

Under the instruction lies the charging itself

And side, in a pocket, underlie cables for connecting

This is what the charging itself looks like, the 16x2 LCD screen is prisoner with a warning.

From the reverse side there is a hologram with Security Code to authenticate and sticker with serial number

The left side is the power connector and the thermal sensor connector / UART

With right - power connectors for connecting the battery and hidden under a sticker with a warning inscription Balance ports

Invalid voltage Li-Ion.

SKYRC IMAX B6 charger works with three types of lithium batteries, and for each type its voltage:

• - Li-Fe (3.3 V)
• - Li-Ion (3.6 V)
• - Li-Po (3.7 V)

And for some reason, Li-Ion on the plan Skyrc should be charged to 4.1V. And to 4.2V, it is necessary to charge in Li-Po mode.

Does not catch the Delta during the charge Ni-MH / Ni-CD.

At all, all aimaks are badly caught a deltaAnd that's why: By default, the device tries to catch a Delta in 7mB, although hardware-software does not know how to measure more accurately 10mV. Sometimes it helps to change the value of the Delta by 10-12mV. But in any case, it is better to set a limit on the tank and use the thermal sensor.

PB reload.

AGM ( ABSORBENT Glass Mat.), as well as gels, also related to the class of non-servant batteries, it is necessary to charge up to 14.4V, and they are extremely sensitive to exceeding the charge voltage (however, it applies to all lead-acid batteries), and SKYRC IMAX B6 in PB mode charges up to 14.8V, which leads to the "boiling" of the electrolyte (water electrolysis process).

Maximum discharge current 1a

Alas, for rejection of the batteries that you use in flashlights or electronic cigarettes of this current. About electronic cigarettes there is generally a separate conversation, they use high-strength batteries, because Current there can easily exceed 10a.

And about the lanterns, everything is simple: if in the most powerful mode, the screen consumption is more than 2a on the battery, then the discharge current in 1a will be low-challenging. Explanation: The battery with a capacity of a popular 2600mach current of the B2A is broken down by a little more, and for it it is a normal mode, because the discharge current is less than 1C. But the aging of the battery (as it is "wear") grows internally resistance of the battery, and the higher the discharge current, the greater part it will be led to overcoming the internal resistance of the battery, or simply, in its heating. And if you recall a pair of formulas, namely p \u003d i * u and i \u003d u / r, then we obtain that p \u003d i²r, i.e. Such a "lost" power grows in proportion to the square of the current, which means that it means that something that can be even more unauthorized on small currents, on high currents will already have a rather important impact.

Invalid voltage definition.

There are two reasons here:

• Not exact calibration
• Drop voltage on high currents on thin wires and connectors / contacts

Are you sure that your copy at the factory was perfectly calibrated? Checked? And if you have a clone? Or more, clone clone, on another microcontroller.

Of course, you can use clone clone, but only the clone on the NuvoTon chip is not only not calibrated, but also a few "crooked" charges batteries, so it is nothing more than funny Capacity Show meter In conditional parrots, and use only for comparative measurements. The main thing to comply with the condition of "the same", except compared.

By the way, pro sKYRC IMAX B6 calibration: In order to get into the SKYRC IMAX B6 calibration mode, it is necessary to hold the START and DEC (-) buttons before applying the power, and after the calibration menu appears for 20 minutes to achieve the operating temperature and only then calibrate the readings on a deliberately accurate voltmeter.

Well, as for the drop in the voltage on high currents on thin wires and in contacts, then everything is also, as well as above, I wrote about the internal resistance of the batteries: power spent on overcoming resistance and leaving in heating increases in proportion to the square of the current.

The inconvenience of simultaneous charging multiple batteries.

It stems from its main purpose: charging model batteries. BC Elements of the same capacity are collected into the battery, then for them you can (and sometimes you need) first carry out balancing and only then make the charge process. But, the balancing process itself for cutter batteries It will be long enough, because the switching current for the lithium battery balance is 300mA on the element, but also after balancing, during the charge, what will happen if you deliver the elements of different capacities? Or initially ex-"identical" elements, but in different ways exploited, and as a result of which having different degrees of wear?

If you have a set of batteries from 1-6pcs working together, in one device, then yes, they will be about the same wear, and if you have three different lamp, in two of them, one 18650 elements are used, and in the third - - Couple, and because Flashlights will be used in different ways, the accumulators will be different.

And if you put a pair of batteries of different degrees of discharge on the charge, then either connect the balancer, and then the charge process will delay, and the more the difference between the charge levels, the longer there will be the process of balancing, or it may turn out that one battery will be recharged, the second is unshaotable .

And so, summing up all of the above, Skyrc IMAX B6 is charging rather for experiments, hobby charging. Perfectly suitable in order to charge and balance Li-Po and Li-ion batteries used in R / C models or airsoft drives, and only conditionally suitable for measuring batteries parameters:

• to decide to buy such else or not,
• to pick up a set,
• to throw out the set of tired and replace with suitable,
• to charge :),
• so that it was not boring
• to ...

And now let's talk about the alternatives to Skyrc IMAX B6.

And so, in relation to "domestic use":

• If you do not need to charge and balance the 2S-6S Li-Po / Li-Ion or 2S-15S NiCD / NIMH battery, there is no need to build charge / discharge schedules, charge current in 1-2a is sufficient, but there is a need to charge simultaneously to 4x batteries, especially of different types (Li-Ion / NiCD / NIMH), different capacities and different form factor ,.
• If there is no need for a measurement capacity, and it is necessary to simply charge Li-Ion / NiCD / NIMH items, and love "diquses and indicators", buy something easier, for example.
• If the buns in the form of "indicators with tberry" are not needed, buy something easier, but well-known and reliable. After all, in fact, the charge process Li-ion / Li-Po according to the CC / CV algorithm is only the current and voltage limit, with which even type microcircuites can be cope with, and a pair of LM317 (one as a current stabilizer, the second as a voltage stabilizer), And even laboratory BP with restrictions then current and voltage is suitable. And for NICD / NIMH, it is better to use something separate and better something good, for example Maha or Lacrosse / technoline, because NiCD / NIMH is more "capricious" and in terms of operation, and in terms of service.

Hello everyone!
Today, once again, it will be about the well-known IMAX B6ac charger.
Yes, reviews on this topic were repeatedly on the site. However, there are some nuances who were not previously stipulated and in the essence had to be deliberately as familiar with the experimental.
Who is interested, I invite you to Cat.

At the beginning, as it should be about the charger itself.
In general, this charger allows you to charge, discharge, test a fairly large spectrum of accumulators of different types, both in a single instance and sets of several pieces with their balancing.
I know three variants of IMAX B6 - IMAX B6 chargers (an external power supply is required), IMAX B6 mini (miniaturized version, an external power supply is required), IMAX B6AC with a power supply unit. Also, there are their variations that differ in power and, of course, clones.
Imax B6ac with a capacity of 50 watts hit me in my hands. In this embodiment, it stopped due to the fact that the device already has a power supply from a 220 volt network, and this is, in my opinion, it is more convenient than to look for a power supply with suitable parameters, carrying two devices separately, etc. etc. Briefly - functionally finished product.

According to the stated characteristics, the observed zoom has the following qualities and capabilities:
Supply voltage:
Constant current from an external source: 11.0 - 18.0 volts;
Alternating current: 100 V - 240 V 50/60 Hz;
Maximum charging power: 50 W;
Maximum. Discharge power 5 W;
Charge current range: 0.1 - 5.0 A;
Current range of discharge: 0.1 - 1.0 A;
Compatibility with batteries: Li-Ion, Li-Po, Life, NiCD, NIMH, PB (lead all types);

The work process is fully automatic. Stopping work at maximum work time and capacity for all types of batteries. Tracking and termination of work to achieve a given temperature threshold and ΔV for nickel;
The possibility of training NiCD and NIMH with a permissible number of elements in the battery from 1 to 15 pieces.
Recommendations for installing Delta PEAK for NiMH - 0.5 mV, for NICD - 0.8 mV. Recommended charge current: 0.3 A.
It is possible to balancing Liio / Lipo / Life batteries from 1-6 pieces of 300 mA balancing current;
Voltage lead batteries from 2 to 20 volts.
Management is carried out using four buttons. Information about programs, modes of operation, installations, etc. Displays the LCD screen size 1602 blue.
It is possible to connect the memory to a computer to make control using software, output to build graphs or connecting an external thermal sensor.
The actual weight of the device without wires: 462 grams;
Dimensions: 135 * 145 * 40 (with legs) mm.
Immediately I want to say that the received charger is not original, it is a clone. I can't judge it badly or well - there was no original in my hands.
Comes in a box in color scheme and inscribe different from original version.
Unfortunately, during the way, the box lost its original presentable-product view, but it did not affect the content.

Content - memory in the package, power cord with foreign) fork, set of cords with crocodiles, connector for different lifestyles, instructions.

A small inconvenience with a fork is easily solved using an adapter adapter.
Externally, the device looks good, the legs are rubber and the smooth surface of the memory is easier to rearrange how to move.

Holographic stickers on the bottom side There are no, which once again confirms the originality of the device.
On the left side of the connectors for connecting a network cord and an external power source, ventilation holes, and a thermometer pattern next to a slightweight a little different form. A temperature sensor is connected here, as well as cord to connect the memory to a computer, which are not included and need to be purchased separately.

Network cord with a length of 0.98 m, triple - 3 * 0.75 square meters.

In the original version of IMAX B6 mini there is a regular connector for connecting to a PC, here you have to get out otherwise, but it is a little later.
On the right side of the jack for connecting the memory with a discharge / discharged battery and connectors for balancing.

The cords are one main and connected to the memory, the rest are already connected to the main and test / charging / discharged batteries or devices with them, as well as cord to connect external power in the field, for example, from car battery.

Two cords used in the future are labeled AWG 18, although the diameter of the main isolation is slightly thicker.

Cord for connecting an external power source - AWG22, the remaining AWG22 and AWG24.
All cords are very flexible. The crocodiles of the wire are soldered, but it did not cost without a light latch of negligence).

For inspection of the insides, it is necessary to remove the side walls of the housing.

All the details of the hull were painted on both sides.
The power supply here is a separate BP, similar to BP from a laptop of everything with a pair of small holes.

The BP housing is extremely good. There is no complaints about the quality of glue. Hair dryer did not help, and since it was not a vandal, then he did not know, although I know that this is not approved by readers.
About the board version 1.9 and the date of production 09.06.2017, it would be possible to say that she was gathered well and even with a minimum flux in a manual soldering place.

If it were not for a story with a capacitor in the center of the composition

During the soldering, a drop of solder fell on it. Small balls found in the vicinity. Disassembly conducted after the first inclusion and familiarization with the functionality. Fortunately everything went around, the trails of the solder removed. But why the board shows 1000 μF, and in fact 680 remains a question.
On the back of the board, only one outstanding element is N-channel field-effect transistor IRFZ44, made using MOSFET technology (CMOS). Through the thermal laying, the heat from it is removed to the lower part of the housing.

The LCD unit can only be disappearing, but moving it away, considered the marking of the microcontroller - this.
It would be very recommended to explore the instructions before starting operation - the charger is not the simplest, but a lot of functions and features. Yes, and the management that is carried out by all four buttons, the device deserves learning. Instructions in English and quite volumetric.
In the network found in Russian on IMAX B6 - the same IMAX B6As, only without an integrated power supply.
As well as on IMAX B6As in Russian.
And one more on
In all cases we are talking About clones, but everything works as described. Special attention before starting work would be advised to pay a block diagram of working with the charger (in the third instruction the best). Having understood in it, confusion in the buttons and the modes will not be.
In the above instructions, it is described in detail the procedure for working with the memory and I do not see sense, especially since the instruction will still have to study each user.

Here I want to stay in more detail on some points of connection to the computer, connecting an external temperature sensor and separate constructive features Sensitive.
As previously noticed, this memory can be connected to a computer through an existing connector. The connector itself is on the left side of the memory (it is clearly visible in the photo of the board above) and hidden in the slot, slightly different from other ventilation holes.
To connect to the PC, you will need a USB-UART adapter that runs through the RS-232 protocol. At the local Radiorenka, this module was bought.

Assigning contacts in the charger from left to right: +5 Volt, transmitting line - TX (Transmitted DATA) and weight.
To "make friends", the memory with PC will require only the TX line and mass - the power supply is obtained from PC. The contact of the charger is connected to the Rx pin (Received Data) - the receiving line of the adapter.
In 15 minutes, built such a design.

We find in the zoom menu of this window and install USB in Enable.

All, devices add each other.
Next, you need to download the LogView program. I downloaded version 2.7.4.494. During the installation in the row of one of the windows, select Imax B6ac. After the installation is completed, go to the Device tab and select Open Port / Recording.
In the dropping window, our memory will be drawn if it is not shown it, we find it in the list, and below indicate COM port where Tolmach USB-Uart is connected.

Next, you can start charging / dischargeing batteries and the program will build graphs, build tables, submit information as shooting indicators, count the container, current, voltage, etc.
However, in my case nothing happened).
It turned out that if disconnecting the memory from the adapter, then at the output of the TX line and weighing the voltage changes within almost 5 volts, and when the adapter is connected firmly. In this case, the LED along the RX line flickes the adapter. It turned out that this LED is connected to the Rx line through resistance to mass. Those. The voltage divider and the adapter lacked amplitude for normal operation.

The LED was evaporated, and only then the system earned as it should. Perhaps, in other versions, adapters will cost without dances with tambourine and rock).
Why can not use the CHARGEMASTER program from the official SKYRC site?
Because in a genuine version, for example, IMAX B6 MINI to contact the PC is used by the port of MicroUSB and there is an exchange of information between the memory and PCs in both directions. Hence the management of the PC.
In my case, it has only TX (Transmitted Data) (Transmitted Data) line - information is only with the PC. And although the adapter has a TX output, but there is no RX in the memory and the exchange of information is impossible.
The next interesting point for me was the temperature sensor.
In general, interest in IMAX B6 appeared due to the fact that lately Constantly came across, then old batteries from laptops, then from other gadgets, then semi-dimensional screwdrivers and how it was necessary to separate even less live batteries from the unsuitable - discharge, charge, calculation of capacity, cyclic procedures.
In the course of familiarization with the memory, several 18650 batteries were tested from the laptop battery and one of the six cans was very warm up. And she cooled about two hours in the fresh air. It became clear that with this bank, things are very bad and use it no longer follows.
And so that such cases are generally eliminate and protect against fire, explosion and other troubles, the thermal sensor should be applied.
I didn't see any sense to buy separately because it is easier to make it easier. To do this, it took the sensor itself, three wires, connectors and datasheet on it.
As a result, he got it

Go to the USB / TEMP SELECT menu window and select the temperature portion of the port.
The thermal sensor is connected to the same connector where the USB-UART connected earlier, only now they will need all three connector contacts - +5 volts, TX line and weight. Connect in accordance with the datashet. The thermal sensor itself is secure with a battery.
When checking, a threshold was set to achieve 30 degrees - the charging process turned off. Next, exhibit the threshold to whom it is necessary, and who considers admissible.

Unfortunately, simultaneously use the thermal sensor and the USB-UART adapter cannot be.

What noticed from the features of the charger?

If you select a lithium battery key to choose a BYTT Type button (will be displayed on the LIPO screen), connect the battery to the output of the Li-ion, then it will be charged to 4.2 volts.
If the BATT TYPE button select the User Set Program menu item, and then select Type li-Ion battery Of the three types of Liio / Lipo / Life, the bank is charged only to 4.1 volts. Such is the installation at the program level.
Why so decided to make developers, it's hard to say. It was thought that only clones sin, but the material in the network claims that the originals behave the same way.
The next, addressed the moment - to establish the discharge threshold can only up to 3 volts. Below does not allow functionality.
Immediately there was a question how much is the calculation of the capacity?
The accumulators of the company Sanyo testing by me, according to the datasheet, you can discharge up to 2.8 volts and from this threshold there is a calculation of the capacity, which on a new battery will be 2150 MAMER.
For the purity of the experiment, an additional zketech EBD-USB electronic load was used.
At first, the charge cycle using IMAX B6AC up to 4.2 V is the discharge up to 3 V, then the charge from IMAX B6AC to 4.2 V and the discharge of the electron load to 2.8 V. As a result of the testimony of the battery capacity, almost 160 mA.
Thus, the memory does not count the container due to the limitedness of the lower threshold of discharge.
Why did the developers have made. As I see, for the sake of user security and saving batteries. The usual user who is not burdened with knowledge about the existence of a datashet on the battery, and sometimes it is impossible to find a datashet has the ability to discharge any lithium battery only to 3 secant for all Wolts cans. And the bank's bank, and the user did not suffer from the further use of the redesigned bank. If I am mistaken, I ask myself to state your own thoughts in the comments.
Summing up, we can say that the paradise under consideration has a wide range of features and rich functionality. It is not suitable for everyone. As the experiments have shown, it is better to use another device to estimate the capacity of batteries. The rest is quite a decent memory and will be in demand by the modeliers, experimenters and enthusiasts of soldering cases.
The network has information that initially IMAX was developed for charging model Li-ion and Li-PO batteries, and all other modes are a good fat bonus.

Pros:
- integrated power supply;
- Power supply from another external power source, such as car battery;
- friendship with a wide range of types of batteries;
- the possibility of balancing batteries;
- cyclical charge / discharge and choice of cycles;
- Sound alarm start, completion and emergency stops of processes (can be turned off) /

Cons and questions left unanswered:
- discharge current only to 1 amp;
- lower threshold for lithium batteries 3 volts;

I would like (well, that)):
- or full miniusb or USB-UART inside;
- Thermal sensor included).

And here the user IMAX B6 shared the experience car battery.

Coupon by $ 10: "B6ac"

The goods are provided for writing a survey shop. The review is published in accordance with paragraph 18 of the site rules.

I plan to buy +23. Add to favourites I liked the review +12 +34