Zte 660 default password is mgts. How the ZTE ZXHN H118N router is configured by Rostelecom. Setting up for work

Customization ZTE router is one of the main stages of connecting to the network.

Moreover, no matter what connection is used to access the network - it will take a little time.

It does not affect the specifics of the configuration and the model of routers - only the speed of access to and the way it is distributed to computers and other equipment depends on this characteristic.

Router selection

ZTE is one of the largest manufacturers of electronics, including routers.

And, although today the most popular are wireless routers who receive the Internet via wireless 3G and 4G channels, universal models can become one of the best options for buying.

That is, such devices that can receive and transmit data both by cable and in other ways (mobile communication,).

The ZTE brand provides a wide range of products to potential customers of its equipment different models, differing in functionality, speed of network access and data transfer.

Everything modern devices, even from the lowest price categories, provide wireless communication (), and many even connect to the network in the same way.

Thus, even relatively cheap models meet the requirements of most users.

Although, as a rule, the higher the price of a router, the more possibilities it provides - including a wide range and a clear signal.

One of critical characteristics is the number of antennas - the more there are, the greater the gain.

An even more convenient option is a router with the ability to connect additional amplifiers.

It is this technique that should be chosen for a large apartment and, moreover, for a private house, territory of an entertainment center, cafe or office.

ZTE E5501

A popular router, released back in 2014, but still popular and sold on the network for about 1000 rubles, is the ZTE E5501.

The advantage of the model is an attractive design (not so important, but still taken into account when buying a characteristic), support for 802.11n wireless technology and the presence of two antennas that amplify the signal by 10 dBi.

A small drawback is the impossibility of connecting a 3G modem and using other methods of connecting to a mobile connection.

Rice. 1. A little outdated, but still quite functional and stylish router ZTE E5501.

ZTE ZXHN H118N

A newer model ZTE ZXHN H118N with a price of about 1000-1200 rubles. already has a modem for connecting to the network using mobile technology.

At the same time, there is also a WAN connector for wired access.

And data is transmitted to other devices located within the range of the router via cable (4 LAN ports) and Wi-Fi.

Rice. 2. ZTE ZXHN H118N - for wireless and wired network access.

ZTE 5502

Another model, which resembles the E5501 router in terms of functionality and price (about 900 rubles), also looks quite stylish.

However, it has practically no advantages over other devices - only wired access is possible, and the distribution of the network is carried out only in one range (at a speed of about 300 Mbit / s).

Although the ZTE 5502 encrypts information quite reliably (using WPA-PSK, WPA2, etc.).

Fig. 3. Bright and functional router ZTE 5502.

ZTE MF283

The MF283 model is capable of receiving (connection via a SIM card), and immediately with two wired connections.

In addition, you can connect a USB storage device to the router to download information from the network directly without a computer, and a telephone cable.

And, therefore, such a router will be excellent option both for a large home and for an office.

Moreover, the antennas of the device are removable and can be replaced with more powerful elements.

Rice. 4. Model MF283 - a router with replaceable antennas and connection to a mobile network.

ZTE MF28D

The router works great with both wired connections (broadband and phone) and a mobile network.

It should be noted that wireless connection provided not with the help of 3G / 4G modems, as in most routers of this type, but due to the SIM card installed in it.

You can also connect up to 2 antennas to the device, each of which amplifies the signal by 3 dBi.

Rice. 5. Router MF28D - for working with 3G / 4G Internet and wired connection.

Preparing to set up

Before connecting a router of any selected type, you should first check its contents. The set of the router should include:

power unit;
Ethernet cable for connecting to a wired network (except for options for connecting to the Internet using only mobile technologies);
instruction, warranty and software disc.

Important: When connecting two networks from different providers to the router at once (for example, via WAN and mobile communication) it is also advisable to install a splitter to filter the signal. And you can increase the coverage using additional antennas.

Rice. 6. Connecting the cable to the laptop's network card.

After connecting all the cables, you can turn on the router using the button on the back.

The next step is to test the connection using the indicators on the front panel of the ZTE router. Here you can see signals showing:

which connector is the PC (laptop) connected to;
Is the wireless connection working?
whether there is a network connection.

If the device is connected to the Internet and a computer, and wireless connection is valid, you can continue to configure the router.

For this, a web interface is used, which everyone has.

And after setting up the device, you can use it without a computer - just turn it on to connect to any gadget, including tablets and smartphones.

Making an internet connection

Management of ZTE routers for wired and wireless connection is carried out using a special interface, which can be connected by specifying an address like 192.168.1.1 in the browser (you can check this value in the data sheet of the router).

If the device is already connected to a PC, after entering these numbers, a setup window appears on the screen, where it is required:

Enter username and password. By default, instead of each of them, the word admin is entered (if you wish, you can replace them with any others);
After filling in the fields, click on Login;
In the window that opens, select the Network section;
Open the WLAN tab in turn (sometimes you can select it immediately from the list, without going to the Network tab), and then Basic;
Select the WirelessRFMode column;
Change the status from Disabled to Enabled;
Press the Submit button to enable wireless data distribution.

Important: Most often, when connecting with a cable, the network is automatically detected. If this does not happen, you may need to update or install drivers network card... And then set up a new connection.

Now that it is enabled, you can configure the connection itself.

In the WAN Connection menu, PVC0 is selected in the Connection Name line, and Route is set in the Type line.

After that, you need to select to type the name and password of the connection (when connecting the PPPoE type), with which you will enter the network.

The ADSL network is configured in much the same way, although the transition is made to a different tab.

Rice. 7. The process of connecting the router.

If the connection is made using a 3G / 4G connection, the configuration is carried out through another tab - 3G WAN Connection.

Here, only the name of the APN access point is selected (you can find it on the provider's website or check with the company's technical support).

The rest of the settings are usually set automatically.

You should know: Depending on the router model, the names of the tabs may differ. For example, the name of the access point sometimes needs to be entered on a separate APN Settings tab. At the same time, all user actions will be approximately the same.

Additional Sections

In addition to setting up a network connection, the user of a ZTE router has the ability to change other parameters:

for example, in the Multi-SSID section, you can make the network both open and closed;
the connection name is changed in the SSIDName column;
the maximum number of simultaneously connected devices is set in the MaximumClients item (most models support up to 32 connections simultaneously);
in the EnableSSID item, the network can be turned on or off;
the HideSSID section allows you to hide wireless network.

Rice. 8. Configuring the protection of the router.

If there is a Security section in the settings menu, where you can select the WPAPassphrase encryption key with a length of 8 to 32 characters.

As well as the type of encryption Authentication and the appropriate algorithm for protecting the transmission of information WPAEncryptionAlgorithm.

When setting a password, you should be guided by a number of rules.

First of all, choose a combination of at least 8 characters, among which there are lowercase and uppercase letters, as well as numbers.

In addition, it is undesirable to use usernames and dates of birth as passwords.

Features of customization for different providers

Setting up ZTE routers is slightly different depending not only on the device model, but also on the service provider.

Among domestic providers, users most often choose the services of Rostelecom, Beeline and MGTS.

In addition to the fact that these operators have the maximum coverage of the country's territory, a wide range of tariffs can be found in the list of their services.

When configuring the router to work with the Rostelecom network, it is required not only to enable Wi-Fi operation(according to the standard method), but also perform the following actions:

In the Mode column set Mixed (802.1b + 802.11g + ...);
In the Country item, put Russia;
In the Channel section, Auto is selected;
Transmitting Power should be set to 100%.
After completing these steps, configure the Multi-SSIDSettings section. To do this, first put a check mark in the EnableSSID item, in the ChooseSSID column - SSID, in SSIDName - the network name is selected.

For correct work a ZTE router, which should work in the MGTS or Beeline network, the same actions are performed as with standard setting connections.

That is, entering a password and login, activating Wi-Fi and setting the parameters of the Multi-SSID sections. At the same time, routers of this brand are no longer used for ADSL connections.

ZTE E5502 WiFi router interface settings overview

Setting up a ZTE router is an important step in connecting to the Internet. detailed instructions on configuring your router

Customization WiFi router ZXV10 H208L and ZTE ZXHN H208N. Detailed instructions for setting up the "Router" mode and creating a wireless WiFi network.

The ZXV10 H208L (ZTE ZXHN H208N) device combines the functions of an ADSL modem at the same time, wifi points access, client SIP telephony, in addition to the router. The modem has one external port- WAN (Wide Area Network) and four internal - LAN (Local Area Network). WAN is used to connect network internet cable to the modem. LAN ports provide connection of various devices (PCs, laptops) to the internal network. The modem is configured via the Web interface. To access it, you need a browser such as Google Chrome.

Customization features

We can configure it as follows: in Bridge mode (the Internet will be connected to only one computer), in Router mode, or open ports.

In Router mode, you connect to the Internet directly through your modem. The advantage of the modem in this mode is the ability to simultaneously use the Internet various devices(tablet, smartphone, PC, etc.). To set up wifi, you must first set up the Router mode.

Setting up wifi on byfly modems, in most cases, is a simple process that does not require special knowledge and skills. Please note that before configuring wifi on byfly modems, you should perform the following operations.

You need to install your modem model (ZXV10 H208L or ZTE ZXHN H208N).
Check if the modem is connected to personal computer or a laptop via a network cable.
Make sure you have a working connection when connecting to the Internet with a network cable.
Set up wifi on byfly modem according to the instructions.

Configuring to Router Mode

The ZXV10 H208L device (ZTE ZXHN H208N) is initially in Bridge mode, that is, there is only one PC access to the Internet, to switch to the Router you need to follow the instructions below.

Setting up the ZTE ZXHN H208N modem. Setup of the ZTE ZXHN H208N modem

Customization modem ZTE ZXHN H208N's router, customization WiFi, IPTV Setup of the ZTE ZXHN H208N modem in a router, the

Setting up a wi-fi router zte zxhn h108n, internet, wi-fi, interactive TV, multiroom

Detailed description of DSL wi-fi ZTE router zxhn h108n, customization master and manual internet, interactive TV, wi-fi

Launch your browser, preferably Internet Explorer, write the parameters of the router - 192.168.1.1

Read also

How to setup Xiaomi phone: Redmi, Note 4 are not others. Only basic optionsNewsRead the detailed annotation not useful tips how to set up a Xiaomi phone. Web, wifi, language not fingerprint sensor. The answer is simple in more than one article ...

How to check authenticity Samsung smartphone a50 Along with high technology related to new model Samsung phone A50, people tend to think that they can get the same features for a much lower price. Due to lack of awareness ...

Sometimes you are very annoyingly calling or sending messages from a subscriber who does not want to hear, in other words, this is just spam and similar unwanted contacts. In order to prevent this, it is enough to block them to get rid of it forever ...

Dropped an iPhone. The screen does not work If you drop the iPhone, the screen does not work, at first you need to calm down. The consequences of a fall are harsh, but there are effective ways to eliminate a malfunction in the phone without the help of others ...

How to install Russian language on HUAWEI smartphone(honor)?. Most of the world's smartphones are developed and assembled outside of Russia. Therefore, the main language of the smartphone interface is also not Russian. Usually, when you turn on your smartphone for the first time, you will be prompted ...

Open the browser, enter http://192.168.1.1 in the address bar

A new tab will open. Set Username to admin and Password to admin. Click the Login button.

Navigate to the Network Interface / Network menu.

Next, fill in the Connection name, you must select the PVC0 option, and if it is absent –Byfly.

You need to remove the Bridge connection. To do this, click on the "Delete" button.

A new tab will appear. Enter the name of your connection in the New Connection Name field, for example, PVC0. Next, go to the VPI / VCI field, where you should specify 0/33. Enter the information from your contract in the appropriate fields Username and Password, click the "Create" button.

If there is no Internet connection, it is worth checking the correctness of the Username and Password information.

Wi-Fi setup

To implement Wi-Fi settings on the ZXV10 H208L or ZTE ZXHN H208N device, press and hold the "Wlan" button for about 20 seconds, after which the corresponding indicator should blink. We enter the router settings as indicated above.

Go to the Network Interface tab.

Read also

How to change SmartHub region for Samsung KPosted 02/08/2017 by by andreyHow to change SmartHub region for Samsung K Preparatory TV setup Change IP address Install (unlock) Samsung smarthub From the off state ...

This 60+ wifi water leak detector only does the basics but it does them well There was an error emailing this page Sensentric SimpleSENCE Home Leak Freeze detectorWater leak detector when you are valid ...

How to connect a phone to a computer via usb: Solutions to the problem A very common problem for users who use ...

Oppo launches its new smartphone called Oppo A31. This device comes with many new features and modern technologies... 91mobiles recently posted a poster featuring the Oppo A31 designed to triple the rear camera setup ...

Question: How to set up the Internet on smartphones (phones) and ZTE tablets?

Answer: Internet setup on ZTE devices is performed in the following order.

1. We connect the service with the operator. This can usually be done via a USSD request.

To connect to the Internet from Megafon, we recommend following the link - http://www.megafon.ru/internet/, select the type of device for connection, for example - "For a smartphone", select your region, then select a tariff, click "Buy", after then the information will appear, what code must be dialed to activate the service, for example - * 236 * 0 #. We dial this code like a regular phone number.

To connect to the Internet from MTS, we recommend following the link - http://www.mts.ru/mobil_inet_and_tv/, select the type of device for connection, for example - "Internet from the phone", after which a page will open with the code that you need to dial to connect services, for example - * 252 #.

To connect the Internet from Beeline, we recommend following the link - http://beeline.ru/customers/products/mobile/, select the type of device for connection, for example - "On the phone", then select tariff plan, then click on "To connect" -> "Connect and manage the service" after which you can see information on how to connect the service, for example, by dialing the code - * 115 * 04 # or by calling the number.

Attention! The page addresses and USSD request codes are for example only and may change over time! To connect, go to the home page of your website cellular operator and already since home page go to the pages with information about internet connection. For other operators, the setting will be approximately the same. You can also call your cellular operator at hotline and connect the service verbally. Another option is to come to any operator's sales office in your city, where the sellers are obliged to connect the service to you.

2. To turn on the Internet you need to go to "Settings" -> "Data transfer" and opposite the item "Mobile. traffic "or check the enable checkbox, or move the switch to the right to" On ". For most ZTE smartphones, this is enough to automatic switching on mobile internet. After the connection is established, depending on the type of connection, in the notification panel, next to the network signal strength icon, the symbol H (HSDPA), G (GPRS), E (Edge), R (Roaming) or 3G will appear. Also, to check the Internet connection, open a browser and wait for any Internet page to load, for example, by typing “ya.ru” (a light version of Yandex) in the address bar.

Attention! If ZTE smartphone 2-SIM, then the SIM-card that will be used to access the Internet must be inserted into the WCDMA / GSM slot, and in the settings "Settings" -> "More" -> " Mobile network» -> « Network settings SIM1 ″ (or 2 depending on the model, see the slot number under the cover) -> "Network mode" -> "Mode preferred network"->" GSM / WCDMA "or" WCDMA "only.

3. If the Internet on your ZTE device does not appear after following the previous recommendations, then you need to either get the Internet settings from your mobile operator in automatic mode, or enter the settings manually.

Automatic tuning

If the operator is Megafon, then go to the site - megafon.ru, click on the link "Support" -> "Settings", select "ZTE" there, and then your smartphone model, for example - "V880E" and enter your phone number. After that, the settings should come to your device.

If the operator is MTS, then go to the site mts.ru, then “ Mobile Internet& TV "->" Help and Service "->" Settings "->" Phone Settings ". There we enter the number and wait for the settings to be received.

If the operator is Beeline, then the automatic setting of the mobile Internet can be ordered free of charge by calling 0880. (The password for saving the settings is 1234.)

Manual setting

If the operator is Megafon, then go to the address http://labs.megafon.ru/dev/, there we select "Other manufacturers" -> "ZTE", we are looking for our device, for example " ZTE Nubia Z5 ″, well, we are trying to configure the way it says there.

If the operator is Beeline, then go to the site beeline.ru, there we click on the link "Help and support" -> "Internet settings" in the search field, enter the model of your device, for example - ZTE V790 and then click "Find instructions" and read the information on at a construction site. You can also send instructions directly to your phone by selecting the link "Send SMS with instructions for ZTE V790".

If the operator is MTS, then go to the site mts.ru, then "Mobile Internet and TV" -> "Help and maintenance" -> "Settings" -> "Phone settings" -> "Internet" -> "Android", read the instructions ...

General rules manual setting

Go to the section "Settings" -> "More" -> "Mobile network". If 2 Sim cards are used, then we select the settings of the Sim card for which the Internet is activated. Next, click on the item "APN Access Points" -> " New point access "and enter the settings that are indicated on the website of your mobile operator. After entering the settings, save the access point, reboot the device and rejoice.

In most cases, the following settings are sufficient.

The router from the manufacturer ZTE is a model that can only work on FTTB lines. Configuring the ZTE ZXHN H118N router Rostelecom can be done both using the wizard built into its program, and in manual mode... Supports IPTV and SIP telephony.

Login can only be done after connecting the cable of the Internet service provider to WAN port(RJ-45) on the back of the ZTE ZXHN H118N Rostelecom router. One of the 4 ports of the LAN router (RJ-45) is connected by an Ethernet line to the connector of the network card of the computer (PC) or laptop used for configuration. You must first set the automatic mode of receiving addresses by the device on the Internet Protocol version 4 page.

According to the information on the sticker, it can be seen that the IP address of the device is 192.168.0.1 - and its authorization data is used by default: the username is admin, the password is admin. The network address is entered into the address bar of the web browser used on the PC, and information about the login and password is required to fill in the fields of the opened window.

The router program requires the obligatory connection of the provider's cable to the WAN connector, and the first login page will remind you of this in case of violation of the necessary condition. If the router detects an internet connection, then the page looks different. It displays suggestions for choosing a time zone and the need to change the factory password with the corresponding information fields.

After meeting the safety requirements, you must click on the "Continue" stencil and go to the next page. On it you need to select the proposed configuration method: "Start the wizard", "Configure the device manually".

How to make a menu complete

The Rostelecom router is configured after selecting manual settings. To enter the menu, you need to enter the data for the username - admin - and the created individual password. When you click on the "Login" tab, you go to the start page of the router interface with general information about the device. The item "Network" in the left part of it opens the possibility of choosing the type of WAN connection.

When configuring, the data provided by the provider when concluding an agreement with him is used: the type of Internet connection (PPPoE), the number of the enabled VLAN (fiber optic) and its priority, username and password. The connection you create must be Always On. The entered data is saved when you run the "Edit" command at the bottom of the page.

To use the watch TV function, you need to re-open the list of possible WAN connections and select IPTV in it. In the connection type string, use "Bridge" and then execute the "Create" command. To do this, go to the "Port binding" item in the WAN section of the main menu.

It is used for software assignment of LAN1-LAN4 connectors. For PPPoE, the default ports are LAN1-LAN3. Computers will connect to them. For IPTV, you need to assign LAN4. It will include a set-top box that will use it over an Ethernet cable line. After setting the checkboxes in the selected cells, press the "Save settings and confirm" button.

Configuring Wi-Fi on ZTE H118N Ethernet router

Router manufacturer ZTE provides its products with configured wireless Wi-Fi connection... Information about the name of the network and the password to access it can be found on the label on the router. But the connection setting can be done manually. To do this, in the VLAN (Wireless Network) section of the menu, select the "Configure Wi-Fi networks" item.

On its page, you can change the factory values to your own. After selecting the "Security" item, it becomes possible to change the authentication type and encryption algorithm. In conclusion, you must press the button to save ("Apply").

Popular settings

Apply automatic tuning Router Rostelecom is possible after the proposed change of the factory password. If after that you click on the "Start the wizard's work" stencil, then on next step it is required to select and indicate the region, branch and service of Rostelecom. After proceeding with the configuration, you must fill in the login and password fields provided by the provider when concluding the contract. If the branch office uses "Dynamic IP", this information is not required.

When connecting a set-top box, it must be assigned the LAN4 port. After continuing, the wizard will offer to change the authorization data. This can be done and continued. The next page offers to enter the settings with the new values of the Wi-Fi network, the name and password of the administrator, click the "Save settings" button.