How to enable WiFi on Android 4.4 2. Connecting to Wi-Fi on Android. Security Setup when using the phone in modem mode

Data-Lazy-Type \u003d "Image" Data-SRC \u003d "http://androidkak.ru/wp-content/uploads/2017/07/wi-fi-s-android1-e1500736382667.jpg" alt \u003d "(! Lang : Internet Wi-Fi on Android" width="232" height="200"> !} The owners of modern phones are often wondering how to install the connection and configure the WiFi-network on android. Users have the ability to connect to wireless networks, add and delete signal sources, change the parameters of your device for saved connections. The gadget may memorize the networks that previously connected, and automatically connect to them, being in the desired range.

Basic settings

1. Open on the device application "Settings".
2. On the Wat-Faya button, move the lever to the "Enabled" position.
3. In the list of available wireless connections, select any connection. If the network is protected and you need a password for access, then an appropriate request will appear when connected.
4. After a successful connection, the status "Connect" will appear. After that, the network will continue and the device will automatically find it, being in the access area.

Most connections enters the list automatically. You can add a connection that is not specified in it does not display its name (SSID) or outside the access zone. If the required network is missing in the list, but it is located nearby, you need to open "Advanced" -\u003e "Update". To add a new connection, you need:

1. Activate the Wi-Faya button.
2. Make sure that the "air" communication is included.
3. At the bottom of the list, select "Add". On Android 6.0 and older operating systems, you first need to click "Advanced" and "Add Network".
4. Enter SSID and other security data if necessary.
5. Click on "save".

PNG "Alt \u003d" (! Lang: Connect to Wi-Fi" width="300" height="231"> !} If there is no desire to ensure that the device is automatically connected to the saved area, you can delete it. For this:

1. Open on the gadget application "Settings".
2. Perform the activation of the wireless connection. Make sure it is included.
3. Select a saved network. On android 6.0 and older operating systems, first click on "additionally" and "saved".
4. Then tap on "Delete".

To view saved WiFi information on the phone or change its parameters, you need:

1. Open the "Settings" application.
2. Translate to Wi-Fi's active mode.
3. Now it's time to connect to a specific network. To view information about her, you need to tap by her name. Here you can see the connection status, signal quality, communication speed, frequency and security information.
4. To change the parameters, you must click on the name of the connection and hold the finger for a while. Here you can change it or delete it.

IMPORTANT! Before you configure the phone, first check if you are in the zone of this or that wireless Wi-Fi connection. You can use your home wi-fi, and you can connect the iPhone to free networks, for example, in cafes or shopping centers.

So, start:

1. We go to the home screen and go to the "Settings" menu.
2. Then the search for available Wi-Fi will automatically be launched.
3. Select the name and connect.

This method is suitable for connecting to unprotected routers, for example, in public places.

If you connect to the protected Wi-Fi, then the sequence will be somewhat different:

1. Open the "Settings" menu.
2. We are looking for a "Wi-Fi" string and turn on the option.
3. After automatic search, Wi-Fi, choose the desired access point.
4. Enter the password and click "Connect".

If this manner fails to connect the phone to Wi-Fi, then you enter the wrong password. In order to find out true, contact your Wi-Fi administrator.

DO NOT FORGET! To connect the phone to the protected Wi-Fi, you need to know the password, next to such connections, the "Castle" icon is displayed.

There are also situations where you need to connect the phone to a hidden access point, which is not displayed in the overall list. To connect the smartphone, you need to know the exact name Wi-Fi:

1. Open the "Settings" menu.
2. We are looking for a "Wi-Fi" string and turn on the option.
3. Click "Other" and enter the exact name.
4. We click "Security".
5. After that, you need to choose the type of protection, as shown in the illustration below.

1. Return to the "Other Network" point and enter a password.
2. Click "Connect".

The most common problems, when trying to connect the phone on iOS to Wi-Fi

Very often, it happens that it seems to be done correctly and followed instructions, but non-mea it is impossible to connect the phone with the IOS operating system to Wi-Fi. It is not necessary to despair, and think that the saying "Technique in the hands of monkey is a piece of iron" about you. Most likely, the point is not in some technical failure.

If you cannot connect the phone to Wi-Fi, do the following:

1. Check the router connection. And also make sure you are in the action zone.
2. Check that the Wi-Fi option is enabled on your smartphone. Go to "Settings", then in "Wi-Fi". If there is a blue tick in front of the desired name, it means that the connection in the phone is performed and the problems are observed in the router.
3. If you want to connect the phone to Wi-Fi at home, check if the cables are properly connected and the router is correctly configured.
4. Restart the phone running on iOS, and re-configure it.
5. Restart the router and also re-configure it.

If nothing helps, try to do the following:

1. If you are trying to connect your smartphone in a public place, consult an employee of the institution and ask you to configure Wi-Fi.
2. Check the connection on other devices, for example, on a laptop, or ask others if your internet works. If there are no connection on other devices, then problems with the Internet provider. Contact your company, Internet provider.
3. Try connecting anywhere else or another Wi-Fi. If attempts are unsuccessful, pay to the service center to check your iPhone.
4. Update the version of the router firmware and check your smartphone in the list of supported devices.

How to connect Android to Wi Fi

Many believe that the iPhone is really not an occupation out of simple. With this statement, few people will argue. But what about Android, many believe that these are easy to use smartphones with which even a child will figure out. However, on the fact, when you try to configure Wi-Fi, some difficulties may arise here.

Generally, the popularity of Android grows every day. Probably there is no longer a person who would have had in the arsenal home appliances of a smartphone or tablet with the Android operating system. Even the smallest kids today actively use these gadgets instead of familiar toys, dolls, machines, etc. But at the same time few people know how to configure Wi-Fi correctly.

It is worth connecting the smartphone once and later the smartphone will independently connect to Wi-Fi. But you can not rarely observe situations when you need to configure Android manually.

For visual illustration, we will use the LG G4 smartphone with the version of the Android 5.1 operating system. However, the model does not matter, android smartphones are practically the same.

Before you start setting up Android, you need to install Wi-Fi by turning on the adapter. The adapter is turned on in two ways:

1. Through the toolbar.
2. Through device parameters.

The first method is great convenience: spend your finger across the screen (from top to bottom) and see the toolbar, as in the picture:

We are looking for a Wi-Fi button with the corresponding icon. Press it and, thus activate the Wi-Fi model.

After that, the search for the system of available wireless networks is launched and this list appears on the screen:

Select the desired and connect. If it is protected by a password, we enter a combination of characters and click "Connect". The whole process is automated and will not take much time.

Another question is if the connection or DHCP function is disabled in the router parameters. Then you need to configure Android manually.

How to configure Wi Fi on Android manually if you are hidden connecting to the router

As in the first method, we first need to turn on the adapter. But the methods listed above are not suitable for this. We change the strategy: first go to the "Settings". But then we are already acting depending on the version of the phone. We find the item "Wi-Fi" and open its menu. Turn on the adapter. If you have an earlier model, find the item "Wireless Networks" and select "Wi-Fi Settings". Transfer the adapter to the location.

Next, go to manual search for available connections: You will be offered a list of access points that were automatically found. If you connect to a hidden network, click "Add Wi-Fi":

Enter the exact name of the hidden access point (SSID) and go to safety, as in the illustration below.

Of course, mobile Internet is pretty useful technology that allows you to connect to the worldwide network almost anywhere in the planet. That's just for home use 4G, the standard of communication is not always convenient and beneficial, especially if the subscriber has a high-quality modern router.

And in this article we will analyze how to connect the phone to the router, and how homemade WiFi Internet is more profitable "classic" mobile connection.

At the same time, they will immediately "get rid of" from several common delusions:

• - First, you can connect to the WiFi network almost any modern phone: the success of this operation is in no way does not depend from the manufacturer of the gadget (samsung is it, nokia, fly, lg or a simple alkatel) or its appearance ("classic" push-button phone or modern sensor);
• - Secondly, the connection of the "mobile" wi fi also does not depend on the Internet provider: if the WiFi access point exists, then it can be connected to it. And who provides this resource: Rostelecom, MTS, Byfly or a millionaire - no value.
• - Finally, the operating system (Android, Windows Phone or iOS), installed on the cell phone only affects the method of configuring the connection to the local network.

So what phone can be connected to the router via WiFi?

Correct answer: phone, in the hardware component of which included special wiFi module.

There is such a Wi-Fi inscription on the device packaging or the corresponding mention of the user manual.

What WiFi Internet on the phone is better than 4G connections?

• - Benefit: Why additionally pay mobile traffic when there is a "free" home internet?
• - "Unlimited": When WiFi-connect to the Internet, you do not have to "count" spent megabytes.
• - "Independence" from cellular operators: In the absence of a signal, mobile communications can be safely use the Internet (on some devices even with a missing SIM card).
• - Battery saving: Wi-Fi app less energy-intensive, rather than work on the LTE or 3G network, so when working with Wi-Fi, the battery is discharged slowly.

Consider in more detail how to connect the Internet in the phone through the router on the main mobile OS.

How to connect wifi on your android phone?

Connecting Android devices is almost the same for all models of cell phones and smartphones: the differences are not significant.

1. To connect WiFi, you must first unlock the device and go to the main menu.

3. In this window, you will appear in front of you the main setup menu: here (usually the first item) are settings Wi-Fi - go to Wi-Fi submenu.

(For more "old" versions of the android, first need to go to "Wireless Networks" and choose there "Setting the Wi Fi")

4. In the settings window:

• - if the Wi-Fi adapter is enabled - appear available for connecting the network;
• - If the Wi Fi module is turned off, the system will prompt you to enable Wi-Fi to view available network connections. Connect the adapter can be slider (usually, in the upper right corner - see picture).

5. Select the network you need from the list, and in the dialog box that appears, write a password to access this network.

If you incorrectly entered the password and the connection to the wireless network did not happen - click on this network again and in the dialog box that appears, specify "Forget", after which it is necessary to immediately enter the desired authentication data.

How to connect iOS phone to WiFi Modem?

1. To configure the connection to a WiFi access point on the IOS OS, first need to go to the main menu and select the "Settings" subsection there.

3. Install the touch slider to the "ON" position to search for available WiFi access points.

4. From the list of networks, select your home network and enter the authentication data.

If all is indicated correctly, in the future your phone will automatically connect to the homework network.

How can I connect WiFi on the phone with Windows Phone.

Connecting such phones virtually identical to Wi-Fi configuration on Android devices.

The only difference here is the visual design of the menu interface.

If necessary, enter a password for connecting to Wi Fi - the phone is ready to work in the home network.

If you bought a new smartphone with an Android operating system installed on it, then the likelihood of your subsequent Internet access is large. To do this, you can use the services of a cellular operator. But at the same time you can spend too much money. Especially in the case of watching videos on YouTube or download heavy three-dimensional games. It is best for these purposes to connect to Wi-Fi networks. But how to do that?

This manual will tell you how to connect the mobile device to the Wi-Fi network to which the Android 4.1.2 operating system is installed or its more recent version.

First you need to remember that you cannot just connect to secure Wi-Fi networks. And those include all networks that require a password. Without entering a password, the connection cannot be connected. If you want to connect to your own router, set at home or in the office, you will first need to find out the network name (SSID) and password. If the owner of the device has not changed anything, then all this data can be found on the bottom of the router.

To connect to the new Wi-Fi network, you need to go to the "Settings" section. In it you will find a Wi-Fi subsection with a characteristic switch. Click on it, it activates the wireless module. Now you need to go to the subsection itself. It contains all Wi-Fi networks detected. Click on that network, the ssid of which is indicated on the bottom of the router. Or select the network without a lockout shown near it. This is an open network that does not require password entry.

If you connect to the secure network, the window should be enecified into which the password is entered. Push it and click the Connect button.

If the password is correct, then in the status bar you will see the words "Get an IP Address". It takes literally a couple of seconds. Then you will find yourself connected to the Internet. Everything is very simple. But there is an even easier way to connect to Wi-Fi. It is to use WPS technology.

If you connect to the home router, the WPS button may be present on it. It allows you to connect the device to the Internet without entering the password. To do this, go to the smartphone in the Wi-Fi subsection and click the "Menu" button. If there is an option "Input by the WPS Pin Code", then this method is available to you. After selecting this item, you need to click the WPS button on the router. And then it remains only to follow the prompts.

That's all. In the future, you can view the information about the current connection using the Wi-Fi subsection. You will see the network name, current speed, security type and your IP address. Remember that Wi-Fi is usually limited to ten meters. Public access points can spread the signal and on the large area.

View browser pages and edit documents more convenient from a laptop than from a smartphone or tablet. Use android gadget as a wireless modem to configure and distribute Wi-Fi using the access point.

What is Wi-Fi Access Point

Wi-Fi Access Point is a station that provides several devices to the wireless network. The role of the access point can be a gadget with an android operating system. Requirements for the device:

the presence of a Wi-Fi module;

the presence of GSM / 3G module.

If your smartphone or tablet does not support GSM / 3G, but works with OTG technology, that is, detects connected flash drives, you can connect a USB modem to it and use as a wireless access point.

The modem interacts with the tablet through the OTG technology cable

Including access point, remember: distributing Wi-Fi, you spend mobile traffic. If the tariff is not unlimited, monitor the balance of the balance after work on the Internet. And also, the active access point increases the battery consumption.

How to distribute the Internet from the phone, smartphone or tablet

There are two ways to distribute Wi-Fi from a smartphone or tablet - standard tools android or using a third-party application. Note - you can only distribute mobile traffic from connectingGSM / 3.G. Unable to configure access point usingWi-fi network connection.

Configure Android devices as a router

Android starting system from version 2.3.x allows you to broadcast Wi-Fi to other devices. To configure the access point, make sure the mobile Internet is enabled and go to the Gadget menu. An example of setting up LG G3, Android version 5.0:

Open the menu item "Settings - Networks".

Select "General Modem and Networks - Wi-Fi Access Point."

Click "Create Wi-Fi Access Point"

Set the name of the access point - so it will be displayed when searching from other devices.

Choose a network protection degree - WPA PSK to connect computers on Windows XP SP2 or WPA2 PSK to connect Windows XP SP3 and other systems.

Set the password longer than 8 characters.

Set the maximum number of users that can connect to the access point at the same time.

Return back and activate the access point by pulling the slider.

You can enable mobile Internet (data transmission) by using the "Parameters - Wireless Networks" menu item.

On android early versions to adjust the access point:

Go to "Parameters - Wireless Networks".

Select "More" or "Next".

Select "Modem and Access Point" or "Mobile AP".

Next, make settings according to the instructions above.

By activating the connection, you will see in the notifications panel at the top of the screen corresponding icon.

Configure an access point once once, for subsequent connections, it will be enough to activate the function in the network settings or, pulling the notification curtain at the top of the screen and clicking on the "Access Point" button.

Photo Gallery: Setup Access Points in the Android menu

Step 1. Open Settings Step 2: Select "General Modem and Network" Step 3. Select the "Access Point" menu Step 4. Create Wi-Fi access point Step 5. Configure access point settings Step 6. Turn on the access point when re-connected You do not need to configure access point

Using applications

Use applications for distributing Wi-Fi access if your smartphone or tablet does not support standard settings. Famous programs: Osmino, Mhotspot, MypublicWiFi.

Setting up Wi-Fi connection on the example of the OSMINO program:

Download the application with Play Market and open it.

Enter the network name, set the password and click Deny.

The smartphone or tablet will go into modem mode. To disable the access point, go to the application and click "Stop Distribution".

Photo Gallery: How to enable Wi-Fi distributions in Osmino

Step 1. Download the application Step 2. Specify network settings and turn on the distribution appears when the program is first turned on

Why the Internet does not work and does not work through the access point

By connecting the mobile Internet and activating the access point, the user may encounter difficulties. There are three reasons for incorrect operation of the Wi-Fi access point.

lock connection by antivirus program;

the impact of the downloaded application or virus to work;

error in OS.

Antivirus, which protects the smartphone in real time, can block network connections. Go to the application, disconnect the Firewall and activate the access point. If there are no connections, delete the antivirus program and try again.

Installed applications make changes to the operation of the operating system. Check your smartphone with antivirus and block malicious files. Using the application manager, find out which program has the rights to control network connections, and delete it. Then turn on the access point.

If the previous methods do not work, reset the gadget settings to the factory. For this:

Go to the "Parameters" menu.

Select "General - Backup and Reset".

Click "Reset Settings".

By resetting the settings, you will lose all the data stored in the device's memory.Pre-create a backup.

Block distribution of traffic via Wi-Fi can cellular operator. If you configured an access point for Android according to the instructions and eliminated the errors described above, contact the Contact Center asking you to check the network settings and the presence of blocking.