Flash Player in Yandex.Browser: Enable, disconnection and auto-update. Enable HTML5 in Mozilla Firefox. Advanced Video Support Disable YouTube HTML5 Player does not work

Many users, when trying to start a video on YouTube, receive the following message - "Currently your browser does not recognize any of the video formats." Most often with playback error, Windows XP owners are faced with Mozilla Firefox browser. The problem is also observed in other popular browsers: Google Chrome., Yandex, Opera and, of course, Internet Explorer.. Today we will tell about everything possible reasons Failure and their elimination.

Causes of reproduction failure

The bug itself appeared relatively recently. It is connected with the active transition of the USTUB service to support HTML5 technology, which is not supported in browsers with outdated versions. The error appears in the updated versions on Windows 7 and 10. It is worth talking about extensions blocking access to display video in HTML5 format. The third reason - the new video did not have time to simplify. Let's consider all solutions that failed.

Fix a mistake

Let's alternately check all the above moments. Immediately notice, to paint all the semi-dimensions (reboot, new Flash Player., Erase cache / cookies) I will not, because it will not be any sense from them. You will need to check the following.

№1 Checking updates

First of all, you need to update your browser to the current version. The principle of updates in all applications is the same. But still, here brief instructions:

Actual versions These programs include most of the necessary video codecs for YouTube. Check which exactly are supported, you can at this address - youTube.com/html5 . Perhaps some codecs will be with exclamation familiarBut be sure to check that a check mark opposite the first codec HTMLVideoElement.. The problem should disappear.

№2 Blocking add-ons

If the past item did not help you - try disable extra extensions. The fact is that various plugins and extensions can block the display of video in HTML format 5. For example, most often caused these plugins - "Flash Player for YouTube ™" and "DISABLE YOUTUBE ™ HTML5 Player". Also failed extensions for direct download, advertising blockers, etc.

Open the list page installed extensions. For example, in chrome it is here chrome: // Extensions /, and in Mozil here - about: Addons.
Alternately disconnect all active plugins and check the playback. Should help.

Separately, mention about Flash Player, which conflicts with new versions of chromium. It needs to try to turn off too. If you still have old version, then go here - chrome: // plugins,in the list of plugins, we highlight the flash and turn off. IN new version We go here - Chrome: // Settings / Content / Flash. In point "Block" There is an option "Add"I recommend to enter there YouTube. For other browsers on the network, a lot of information on the flash player turn off - Try.

№3 New video

Check the release time of the roller. If it is a few hours, then the problem can be on the part of the servers. Many users note that waiting a little time, they launch video without problems. Perhaps you have such a case.

Conclusion

If you did everything right, then the error "Currently your browser does not recognize none of the video formats" should disappear. Finally, it is worth mentioning that Mozilla and Chrome recently refused to support their application in Windows XP. In this case, to solve the error, you will need to separately set the codec support plugins. Here is a visual video instruction on the example of Mozilles.

Any audio or video file proposed for viewing needs a special player that converts digital information to a user-friendly. One of these available funds is the HTML5 player. What is good, and what are his shortcomings - we will find out below.

hTML5 player development and function

Players players belong to the new generation of virtual players, thanks to which high-quality support for all existing video and audio files are carried out. The developers of this project were tested by Yutube, and even offered users to compare the quality of the filing of a video detector with the player on HTML5 with a morally outdated flash player. Entering the new video player meant the solution to such problems as:

lack of hanging and vulnerabilities;
instant discovery of videos;
support for 64-bit video;
playing video new formats (H.264, HTMLVideoElement, etc.).

The new video player was prescribed by the default, as early as early as 2017. Users planning to watch videos stumbled into a picture that can be learned by visoring the cursor to the video.

But as you can see, it is not necessary to download the player specifically: with a new visit to YouTube, you will be offered and install it for free.

But the trouble: the current use of the new video player identified a number of problems that developers are not in a hurry to correct. Standard complaints of visitors to YouTube are reduced to:

constant hanging video de
the appearance of alien elements (artifacts) on video;
incorrect images or lacks such on many popular browsers.

In many cases, the failure to use the HTML5 system is associated with obsolete iron that users are in no hurry to update, due to its reliability and comparative health. Sometimes the cause becomes obsolete software that does not support drivers for the video player of the new format. Any of these reasons can spoil the impression from viewing a fresh video. If you are among those incomparifications, we suggest you solve this problem simply simply, disabling the default HTML5 and putting an outdated but simple and reliable Flash player. So how to disable HTML5 in popular browsers?

Turn off HTML5 on Firefox

To disable HTML5 on this browser, you can use two ways: manual and using special programs.

The software "cleaner" and removes the problem completely. To do this, you can use the Disable YouTube HTML5 Player plugin, which will hide a new player from our eyes and will default flash player. You can also change the settings of the video player manually. To do this: We enter the Fairfox command in the search string. about: Config, immediately falls out a warning window.

It is not known which warranty on free browser, anyway. Go ahead.

This is all the current settings of our browser. We are only interested in some. To do not look for them, breaking your eyes, enter such settings in the search bar as:

ogg.Enabled.;
wave.Enabled.;
webm.Enabled.;
windows-Media-Foundation.Enabled.

We enter into the search string - and turn off. To turn off, it is enough to bring the cursor to the setting and press twice. If everything is done correctly, the setup state will change - instead of True, FALSE will seem.

After that, you should reboot the browser and when opening any video, we will be able to play it from the old flashplacer.

If you compare the existing Youtube today with the one another 5-7 years ago, then these are completely two different concepts ......

Hundreds terabytes exclusive Content, a constantly growing audience and changed a lot, but about everything about everything .........................

→ On the eve of 2017, the Youtube manual announced the new HTML5 player.

Interestingly, the first time the users had the right to choose but now everyone has been pronounced new browser .

It is not surprising that the new features appeared supporters and opponents, so below we will tell about HTML5 technology on YouTube, as well as how to turn it off ↓↓↓

What is this player ???

Many YouTube users at the end of 2016 began to observe the problems with the service !!!

As it turned out, the reason was walking in the next novelty - the player of the video HTML5.

Example problem ↓↓↓

Why new feature It turned out to be a burden for many and, how to disable it, - hereinafter detailed ⇓

→ HTML5 player - new standard Playing a video that has already changed the morally obsolete flash player.

→ At the end of 2016, everyone could test the function by activating the corresponding button ().

The developers promised a lot of interesting buns, including:

lack of vulnerabilities and braking;
fast opening of the rollers;
video support 64-bit;
reproduction of new standards (H.264, HTMLVIDEEEEEMENT, etc.).

In fact, everything turned out to be much planning, because instead of the promised "innovations" users received a lot of problems:

constant hanging;
the appearance of artifacts on video;
incorrect display in many browsers.

As it turned out, the main reasons are related to:

outdated iron
non-compliance by
drivers
browser and much more.

Now at the address () you can observe the inscription "Now the HTML5 player is always used, when it is possible," therefore most viewers have no choice.

Attention!

To check which the player is used on this moment, Move the mouse over the video and click on the right button.

If there is an item "On the HTML5 player", then the appropriate player is used.

Here ↓

That is why we prepared the best waysHow to disable HTML5 player on YouTube in various browsers.

It is quite real and does not take much time, so read carefully. ⇓⇓⇓

Remove this player inFirefox.

On the Firefox problem You can solve at least two ways:

1) Through special additions (Disable YouTube HTML5 Player)

2) or manual way.

In the first case, it is enough to simply set the appropriate extension to disable HTML5 player in YouTube.

But we consider the most simple method below: ↓↓↓

Enter the "About: Config" to the search string, after which the developer panel opens.
Copy these components into a separate document: "media.ogg.enabled", "media.wave.enabled", "media.webm.enabled", "media.windows-media-foundation.enabled".
Each of them copied to the appropriate search string, we find in the list and turn off. To do this, you can click on the record twice.
This action must be done with each component above.
Now restart the browser.

You may notice that now reproduction of the rollers is carried out through the Flash player. !!!

In general, nothing complicated and after 5 minutes you can enjoy your favorite rollers.

And now we learn how to do it in other browsers ⇓⇓⇓

We remove this playerinChrome. andOpera.

Now we will consider another method how to disable this player with special applications - Disable YouTube HTML5 Player ↵

This method Suitable for Opera browsers, as well as chrome.

Below we describe how to set this extension on the example google browser Chrome:

follow the link that we led above;
click on the Install button and wait for the process to end;
restart the browser.

In the "Settings" section - " Additional tools"-" Extensions "you can see that the utility is installed.

P.S. - Make sure the checkbox "Enable" is activated.

Open any roller and right-click and notice that the flash player already works.

If necessary, you can disable the disable Youtube HTML5 Player in the extensions and then the flash player will not work again. IN browser Opera. The procedure is similar, so it makes no sense to describe it in detail.

As experience shows, this method helps to get rid of the permanent braking of the rollers, as well as other problems with playback.

Thus, it can be concluded that the Youtube manual presented a sufficiently crude product, however, the benefit that you can always turn off similar modifications yourself.

Adobe Flash. Player lives his last years. This platform is morally outdated, and the developers will cease to support it by 2020. Many companies, programmers and enthusiasts have already begun to abandon the proven format in favor of progressive, but also "raw" technologies. One such innovation is the HTML5 video player, which, potentially can replace the good old flash player.

Not all users boast of powerful and modern personal computers with all updates operating system (Drivers, codecs). Not everyone is installed (the higher the version, the less errors when working). But everyone is interested in life boiling in global Network The Internet. Thousands of films and TV shows, tens of thousands of clips, hundreds of thousands of funny amateur videos can be found and watch through the World Wide Web at any point of the planet Earth.

If, when viewing a video on a computer, graphic distortions arise, the user should not be upset and look for an alternative to view. The first thing to do is to check the performance of your PC, whether all updates, drivers and codecs are in working condition. The second nuance is the test of the video player built into the Internet browser itself Mozilla. Developers from Mozilla Corporation are trying to please all their fans and just users search engine. Therefore, everyone has the ability to view video through various players: Flash Player or HTML5. To check which player is enabled in the Firefox browser, it is enough to click on the screen with the video sequence right.

How to disable HTML5 in Firefox

If user personal Computer inferior to technical characteristics To its modern fellows, you can try to change the player with HTML5 on Adobe Flash Player. To do this, go to hidden settings browser typing in the search bar " about: Config" The developers kindly warn about risks associated with changes in "thin" settings. We accept responsibility.

In the "Search:" window, for ease of location to change the parameters, you need to gain the English word "media".

Four parameters that may be included in silence must be changed from "True" to "false". That is, turn off their double-clicking left mouse button.

media.ogg.enabled.
media.wave.enabled.
media.webm.enabled.
media.Windows-Media-Foundation.Enabled

After rebooting browser Mozilla Firefox. The settings will take effect, and the new HTML5 player will be changed to Adobe Flash Player.

How to enable HTML5 in Firefox

If you need to return to the back manipulation and change the old player from Adobe to a progressive analogue, the user needs to carry out the same manipulations with the aforementioned parameters with "false" to "TRUE". Restarting the Internet Observer, the video should show without interference and failures.

Flash player is a special library that allows you to work with those applications that are conscious on the basis of Flash technology. By default, Adobe Flash Player is already installed in Yandex.Browser and is included in the browser modules, but if there are problems with displaying flash content, it is probably disabled or a failure in the player has occurred.

If necessary, Flash Player can be disabled or included. You can do this on the work page with modules. Next, we will tell you how to get into the module menu, turn on, turn off the flash player.

If there are any problems with the work of the flash player, then first will need latest version Abode Flash Player for Yandex Browser, and then, when you reap the problems, you can try to disable. You can do it like this:

We write in the browser row browser: // plugins, press ENTER and fall on the page with modules;
We are looking for the Adobe Flash Player module and click on " Disable».

Similarly, you can turn on the player. By the way, turning off the flash player can eliminate frequently arising errors of this player. Since the importance of this player with time is moving into the background, it can not be included in principle to some users. For example, Youtube player has long switched to HTML5, and the flash player is no longer needed.

Enabling / Disable Auto Update Flash Player

Usually automatic update Flash Player is turned on, and if you want to check it or, on the contrary, turn off (what to do is not recommended), then here's how it can be done:

1. In Windows 7: Start > Control Panel
In Windows 8/10: Right-click on Start > Control Panel;

2. We put the view " Small badges"And we are looking for Flash Player (32 Bit)»;

3. Switch to the tab " Updates"And click on the button" Change update settings»;

4. Select the desired item and close this window.

Adobe Flash Player is currently a popular module that is actively used by many sites. Despite the fact that a partial transition to HTML5 occurs, Flash Player continues to remain a relevant plugin and it is constantly updated to obtain new opportunities and for security reasons.