What to do if the asus tablet does not turn on. What if the tablet does not charge and does not turn on. Camera battery sat down

Technique with which we work every day - mobile phone And the tablet is also not eternal. After months and years of intensive exploitation, it fails, delivering us difficulties and inconvenience. Including with each of us this situation may happen when the tablet does not turn on. You should not panic in this case, we recommend reading this article and follow the instructions shown in it. We hope for something from what we will offer you, will help, and your computer will work in normal mode.

Check the charger

First you need to check whether your tablet is charged. It may well be that there is no, and the battery charge is not possible due to the adapter fault. To verify this version, which may be the reason that the tablet does not turn on, it is enough to try to charge your gadget using a USB cord from a personal computer. In the event that the tablet shows that the battery began to replenish, it will mean a charger malfunction. We recommend purchasing a new in the online store or at the point of sale of accessories. We draw attention to the fact that buying follows only the original charging for the tablet, since the use of fake accessories threatens to enter your computer or its battery.

Pay attention to the ON / OFF button

Other possible cause why the tablet does not turn on, there may be a faulty button on the device. In principle, it is difficult to understand this without mechanical disassembly. However, you can try to do this by pressing the button and paying attention to its move. If you notice that the sound of pressing spare parts or its move has changed, it is probably just broken. Then nothing surprising is that the tablet does not turn on. What to do in such a situation, to solve you. Either you can independently disassemble your computer and solder the button in the place where its contact was broken, or if you weakly understand this and would not like to risk the working state of your tablet, you can attribute it to service center and entrust the repair to specialists. There are either the connections needed to transmit a signal from the button to the device itself, or replace the mechanism to the new one.

No pictures - Another possible reason

This situation may occur when the tablet as a whole is functioning normally, however, the display for some reason does not show the image. Such a problem is quite serious, since it will be necessary to contact the repair center in any case to solve it. In order to diagnose such a problem, due to which the tablet does not turn on, it is enough to implement all the manipulations necessary for inclusion, and wait for 15-20 minutes. During this time of operation, the device must warm up slightly. You can feel mostly in the area around the chamber. Heating the case suggests that the tablet works, but you can not physically see it because there is no transfer to the screen. So, the problem in the connecting loops is either in the display itself. Most likely, something will need to be replaced. The problem with the loops is actually solved pretty quickly and simply, but if the case is in the screen - then buying a new one can be quite expensive.

Does not turn on the tablet due to battery

What are the reasons? The answer to the question why the tablet does not turn on, can also be a version of the non-working battery. So, such that the battery of your device does not hold the charge at all and needs an urgent replacement. To establish everything, we advise you to connect tablet PC to network devicehaving previously reversed the battery. If the Samsung tablet does not turn on, the problem is likely to be solved in this way. It is possible to determine what is all right in the battery, you should contact a service center or shop with accessories and ask there to install the same battery for the test. Just installing it and clicking the start button (if the problem is really in this), you will see that your tablet will again function properly.

Software errors

There are cases when the tablet ("Android") is not included due to errors at the program level. They can occur with the boot mechanism called bootloader. The latter is responsible for loading the system, its normal start of work after turning off the tablet. Therefore, if the device does not function normally after the start, at the Bootloader level there were some problems. It is not difficult to solve them - it is enough to "knock down" all the settings in such a way as to return the entire Android operating system in that kind in which she stayed at the time of purchase.

If all indicates that this lies the reason why the tablet does not turn on, then you need to make a reset of all settings to the factory. It is simply carried out - by pressing the HOME (or ON / OFF) key and the sound adjustment buttons. After this combination opens menu Androidwhere you can choose the reset version and return it to the "clean" state. The problem after the reboot must be solved.

Outcome: do not rush to panic

Each of us may have such a situation when the tablet does not turn on. What to take in such cases, we listed in this article. The main thing that should not be done exactly, it is to panic. It is necessary to understand that any problem has its own solution, including if the tablet does not turn on. What to do in this situation? Your task is to find this cause and eliminate it. As a last resort, if you really have no desire to do this, you can always attribute your gadget to the service center, where you will help you. And then your device will again please you with your work.

Until recently, tablet computers were an indicator of wealth and luxury, but there is no unprecedented growth of technology, and now, after the emergence of a very powerful budget line, sensory gadgets have become available and the average person. But both as any technique, the tablet is not immune to the fact that in some unique case for the owner it will break for one reason or another. Basically, the forums are set from year to year the same question: why the tablet does not turn on after a reboot, or does not respond to actions.

So what is the problem?

All problems associated with the "magic" not launch of the tablet device can be divided into two categories:

Program errors;
Hardware failure.

It is these two enemies that can very much to sweat the nerves to the owners of sensory devices. You need to consider the reasons for these two factors in detail.

Hardware failure

Already from the name immediately becomes clear that the reason for not the launch of the device has become a problem in the hardware of the device, that is, in its equipment. The contacts overloaded or got moisture, a closure occurred due to problems in the power grid, or you accidentally missed it on the floor, and much more, which could lead to problems with equipment.

Hardware stuffing tablet

In such a situation, one of the most faithful solutions is to attribute his assistant to the service center, well, if you still have a guarantee for which you can get free repairsBut only if the cause of the breakage was not external influence on the gadget, for example:

Directed strikes;
Water falling;
Falls from a height.

Unfortunately users, these categories do not relate to the service case, but are the cause of the galant use of the gadget.

It is important to know the repair of equipment, depending on the location of the problem, can range from 40 to about 55-60% of the cost of the tablet, alas.

Software malfunctions

In case of failures in software, User, using some recommendations, can restore the workability of the device. After all, probably, many users of personal computers running Windows XP are faced with the problem of constant failures, and what was the tool to eliminate them?

That's right, a skilled owner, or re-installed an updated version. operating systemor through safe mode Or special utilities tried to remove those conflicting applications that prevented the correct launch of the system, mostly there were viruses or malicious programs.

Does not turn on what to do?

The reasons and factors of hardware problems have already been considered higher, but in some cases not everything is so hopeless, when except the hike to the service center, there are no other outputs.

The reason for the usual not launch of the touch device can be a banal battery discharge, especially if you are an active Internet user, and also like to spend time behind the games. Then the time flies very, very quickly, so you can not notice that your friend is discharged, there is only one right right here - to charge your device.

The tablet is charging

You do not need to immediately turn on the device, after it is connected to the network, wait somewhere 20-30 minutes, and try by holding the power button, run it. If the tablet does not react, it may be, as an option, you have a damaged charger, then you need to try another, and in the case negative result Contact specialists to get qualified response.

Even by extreme measure, but only if you have access to the tablet battery, you can get it and insert back - this is a very common practice among the owners of the phone. Somewhere closed something, did not fully discharged, and does not allow the system normally.

Solution of program errors

Cracked the matrix

To resort to solving software failures, it is necessary only when you are exactly sure that the problem does not lift in the equipment failure, that is, with a careful examination of the gadget housing, they were not discovered:

Cracks on the screen or matrix;
Chips or cracks on the case;
Incomprehensible multi-colored stripes on the screen;
Drop-down parts from the case;
And other.

If this was not detected, then you can try to reanimate a tablet computer through reset or emergency reboot.

How to reboot

The most proven method for today, even by experience of unpleasant communication with a personal computer, is to hold the on / off button somewhere around 10-15 seconds. After that, you can try to turn on, but again, do not forget that the tablet could simply be discharged.

If this attempt was not crowned with success, then you can try to find a small hole with a reference to the device on the device's enclosure.

It is important to know that only some manufacturers, especially a budget series of tablets, equip their tablets with such a button.

Carefully, needle or thin paper clips, omit in the hole and clamp for 10 seconds, then try to start the tablet.

Here, some of the owners of the devices may have some problems, and they are connected mainly due to the difference of manufacturers' approaches. Despite the fact that now more than 75% of the sensory gadgets produced are running operating android systems, Each produce inserts your highlight, which is sometimes completely incorrect, as in this case.

To reset the settings, the owner must download Recovery, or simple words "Downloader", which will allow you to do software resetbut for this you should click certain combination keys that differs from various manufacturers.

Tablet on Android

The most popular combinations:

Button on / off and plus volume;
Minus volume and inclusion;
Power, HOME button and minus volume;
Plus the volume, turn on / off and the "Home" key;
Pressing two volume keys and turn on / off.

One of these combinations should definitely start the bootloader.

Boot menu

Now, as they say in the upper tip, the volume keys select the penultimate item "WIPE DATA", and the Power button confirm the choice.

Reset everything

The following menu appears, where at the top there will be warning information that all personal data will be deleted during the "hard" settings. Driving buttons select "Yes", confirm the choice. Now you have to wait until the reset process is completed, and the tablet must boot yourself if not, run it yourself.

Safety mode entrance

This mode, like on a personal computer, will remove unnecessary applicationswhich may interfere with the normal operation of the system. This method only works when you still managed to run the device, and it reacts to pressing, but it slows down very much.

Shutdown menu

Click the "POWER" button until the shutdown menu appears, press and hold the "Power Off" item before the appropriate notification appears.

I confirm your intentions that we want to enter the safe regime.

Safe mode

Now you can reset or delete all applications and downloaded files that can somehow conflict with the system. For normal download, simply restart the tablet.

Overset tablet

This is the most extreme procedure for correcting a software failure that requires some skills and knowledge, to tell about all possible options for reinstalling the OS on the devices under android management It is impossible, the instructions are drastically different.

One of the ways to update

To obtain qualified assistance, you can contact technical support on the manufacturer's official website, or find your tablet computer on our website, where it is necessary, in details, describes the update instructions and reinstalling the system.

Reading time: 43 min

Quite often, the Android tablets cease to run, and at different stages. Causes can be very different and can be determined by using memory, perhaps this problem preceded your any action.

Standardly exists 2 groups of problems: hardware and software. Each group has its own features of manifestation, but in both cases the tablet is not loaded. The difference is at what stage the download is stopped. Typically, the tablet is either completely not working, or comes to the screen with the inscription Android, alternative optionWhen the picture of a broken robot is shown.

The hardware problem is quite serious and less likely to eliminate yourself. System cases are more common, since the cause can be the installation of any application curve, incorrect firmware or damage to system files.

Hardware fault

Often arise questions what to do if the tablet is not loaded, but general rules not. Before proceeding with further elimination, you need to perform primary diagnostics. In this case, there are several aspects to pay attention to:

After launching the tablet, are characteristic sounds from it. Typically, the work of the tablet is accompanied by heating, sometimes it is heard barely tangible sound;
Whether the backlight works on the screen. Often the screen itself remains black, but the backlight works, that is, the device itself works;
Whether power is enough to run. Perhaps the battery does not have the right amount of charge.

In the hardware there are several varieties of faults that can be identified independently. So the most common problem is the problem in the system. Here, a malfunction can be on 3 levels: broken charger, battery or tablet itself has problems with contacts.

You need to first try to charge it, connect the charger to the tablet and after 10 minutes try to press the POWER button. If nothing happens, then perform similar effect When connecting the tablet to the computer. At the same time, check the connection strength in the connector, if there is a backlash, then try to move the charger slightly.

Another probable problem is a battery breakage, while it often swears, but not necessarily. You need to insert another battery and run the tablet. If a malfunction in the battery, then you just need to purchase a new one.

Screen damage is another common situation, usually accompanied by a drop. Here, the matrix itself can break, while mechanical damage may not be. Usually indicates the problem of what the tablet is turned on, but not loaded, with no mappings on the screen. Of course, the reason can be mechanical injuries, but then it is obvious, because there are appropriate damage on the screen. Sometimes it is not on the screen, it may not suffer, but do not start.

Perhaps the tablet does not start due to overheating. Usually it is preceded by an emergency shutdown, for example in the middle of the game. After time, the device will be available for launch. The reason for this situation is littering the cooling system. Try to clean the air intake. Do not use the tablet to the last, as the north bridge can fly due to overheating, it is better to clean it in time.

Any other internal malfunction. Most often, the video adapter, the north bridge, less often the processor. It is often a problem in a simple output of the board element, such as a transistor or transformer.

System malfunctions

An alternative and more common situation, why the tablet is not loaded - this software problems. The reason can be any pre- installed program, influence of viruses or ownly completed system process. In the latter case standard means Block such actions, but when installing third-party dispatchers, you can stumble upon a similar problem.

Usually there are several options for solving the specified fault: reflash the tablet or restore the factory settings. The second option is the easiest and affordable wayBut it will completely delete the data in the memory of the smartphone, while the information will remain on the flash drive.

For each single tablet, the ways to restore the settings may differ, but in general, the common options are:

Complete the work of the tablet;
Remove SIM I. microSD cardsto guarantee their integrity;

Hold the volume button and POWER. Sometimes you need to clamp the volume decrease. Another common option is instead of POWER hOME button. Hold the buttons until the vibration, usually 10 sec.;
In the menu that appears, go to the category "Settings". The choice is by the swing of the volume;
Then select "Format System";
Next, specify the "Factory Reset".

In some models for such tasks there are special built-in and in-depth keys that should be pressed with a needle.

From that moment on, the tablet will return to initial settings Systems. It should be noted that sometimes it is necessary to perform the procedure several times, since it does not work from the first. If when holding keys, you appeared a robot with exclamation familiar And it is written "No commands", the combination is invalid for this device.

Also, instead of recovery mode, the user falls into the FastBoot menu. Here you just need to reboot by selecting "Restart Bootloader".

Alternative system problemThis is when the tablet is loaded for a long time. Usually the cause becomes viruses or rages of multitude of programs. You need to check the system with an anti-virus scanner, and then remove unnecessary applications from the autorun.

By completing one of the proposed recovery procedures, the tablet must return to life. If manually achieve this result is impossible, because of the hardware breakdown, you will have to use the service center.

If you have any questions about "What to do if the tablet is not loaded?" You can ask them in the comments

Tablet computers confidently entered our lives and accompany us both on vacation and at work. The situation is very unpleasant when the device is not turned on in the most responsible moment or does not load the Android logo. The most elementary is simply discharged, especially if you actively enjoyed the device during the day or night. Then everything you need to revive him is to attach a tablet to the zoom and wait a few minutes before running.

But there is more global problems And they can be divided into three groups:

mechanical
electronic
software.

Such a trouble may occur not only with cheap brands on Android (Digma, Chuwi, Teclast, Cube, FNF, Pipo, Onda, Colorfly, Ainol, Ramos, Vido, No-Name), but also with market leaders - Apple, Asus, Acer , Sony, Lenovo, Huavay.

Consider in detail all three factors in order to accurately determine why the tablet does not turn on. The manual is universal and suitable for both Androyd, Windows and iPad, but in each case there are features.

Saved or broke the Power button

If the tablet has fallen, then the inclusion key could first be injured. Inspect it should not be chopped or swing, when you click there should be a characteristic click of clicking. If there are violations in the actions of the key, you will have to disassemble the tablet and inspect the nature of the damage. Skores you need to roll the key or replace it with a new one if contacts are broken. Repair the mechanical button will not make problems, with the membrane will have to tinker.

Broken charger connector

If the On / Off key is proper, then you should view the zoom connector. If you sin the fact that very sharply twist the wire from the socket, expose the mobile computer to the effects of moisture or often drop, then sooner or later it will lead to a breakdown of the contact connector. The deformation of the nest leads to the fact that the plug will not enter the connector, it will not be done to the end and even, can overlap some part of the case or breaks if the blow was quite strong. Damage to the PIN Connector will cause the device to be charged. And in this case you have to disassemble the case and solder contacts or completely change the charge socket.

Wire interrupts

It is possible that the device does not start just because you have a faulty memory. Check the housing on the swelling, throughout, whether the cable will not interrupt. If damage in the wire, then it is quite realistic to replace yourself. Cord fractures are not visible, so it will correctly check it on working capacity, connecting to the phone, electronic book etc. And check the charge.

Removable battery can be powered directly. This method is unsafe for the battery, but if you are ready to take a chance, it is real. The battery from this process is very quickly in disrepair, therefore it is not necessary to abuse this method of recharging.

There is a safer way to feed the battery - with the use of a universal zoom called "frog"

Resort to these methods only if you are completely confident in your abilities. It is better to entrust the repair of professionals, and not risk.

Electronic problems

Burned charger

If the memory has been exposed to moisture or was included in the network without a voltage stabilizer, it could well burn. The only way out is to purchase a new and desirable original, which is not always possible.

To such brands like Asus Fonepad 7 ME372CG, Huawei Mediapad. M2, SAMSUNG SM-T311 GALAXY TAB 3 8.0, Sony Xperia. Z2 Tablet, Lenovo Tab A5500 N is the opportunity to buy the original charging, then to Chinese brands Smarto 3GDI10, 4Good Light AT300, Digma Plane 7546S 3G, Explay XL2 3G, Ainol Novo 9 Spark, BQ, Thomson Hero10Sco, Irbis TZ185 will have to select the zoom based on Characteristics of the burned block. Pay attention to the voltage (standard - 5 volts) and how much ampere (recommended from 1a to 2.5a) gives the acquired adapter

In the meantime, try charging from USB by connecting it to a computer or an external battery.

Died battery

Modern gadgets are equipped with lithium ion or lithium polymeric batteries. Such batteries are equipped with charge controllers that are responsible for preventing a deep discharge of the battery. Store such batteries can not - AKB tend to loss of tank. It is necessary to ensure that they do not discharge into zero and did not overheat above 45 degrees.

The average duration of the "life" of the battery when active use - 3-4 years (about 300-400 cycles).

To check the battery item, you need to measure the voltage on the battery and the board. Remove the battery and plug down. Now check the indicators on the voltmeter, the parameters must comply with the following data:

CHARGING	BATTERY	PAY
5 V.	3.7 V.	3.9 - 4,2 V
9 V.	7.4 V.	7.9 - 8,2 V
12 V.	7.4 V.	7.9 - 12,2 V

Got water on chips

Contact with water is very delicate. Everything can happen anything - the oxidation of contacts, violation of the speakers, fire, overheating. Finding on chips, the liquid leads to a closure and turns the smart technique in the brick. If suddenly it happened so that the water was hit, then the first thing to do is to turn off. Then turn the tablet with the display up to prevent the fluid penetration to the internal elements. If possible, remove the battery, SIM card and USB flash drive. Carefully remove moisture. You can put the tablet in the same position in absorbent absorbents - the easiest and most publicly available is Fig. After, give the device to completely dry at least a day.

Malfunction in the screen or video adapter

It happens that the tablet PC functions and simply does not light up the display. Touch rear cover - She must warm. The working tablet produces a small noise or vibrate when turned on. There are two options - either after the firmware, the actions of viruses or other software exposure does not start the display, the touchscreen is damaged or the video adapter died. In the first case, it is necessary to reset to factory settings or flashing. It will take to replace the loop if the latter departed after the strike.

To check the video adapter you will need a TV or computer. The new generation gadgets have a MINI or Micro HDMI video output, with which you can attach a tablet to TV. If the problem is in the display, the image will appear, but if the video adapter is damaged, the TV screen will remain dark. Such a repair is better to entrust specialists.

Burned processor or memory

With a strong daily load and start large number Applications can overheat or even burn the processor, which will cause violation of the functioning mobile computer. In very small quantity modern devices A built-in cooling system is used. Moreover, it is not worth counting on it if you have a cheap mobile PC. The more active you use the tablet, the more often your CPU overheats, which leads to loss of performance. If the maximum permissible temperatures are exceeded, microcircuits, loops, RAM, printed circuit boardWhat will lead to a closure of power circuits. The repair of the processor is made only in the service center, but will fly into a penny.

If the tablet does not turn on, it is worth checking flash memory. If you have experience, you can try repair yourself, while even increasing it.

Nothing above does not help - perhaps the problem in the soft-filling.

Software failure

Activated sleep mode

Sleeping mode is one of the common reasons why the gadget is not launched. If at the time of the operating system transition to the sleep state, the device freezes and cannot continue to start loading android. To remove the sleep mode, connect the tablet to the zoom and turn on in a few minutes. So that there are no such difficulties in the future - disconnect sleep mode in the settings.

Viruses

Rarely when the device does not function due to the viral attack. More often, it is loaded at least before the screensaver and hangs. In this situation, it is necessary to fully clean the good antivirus program. To do this, attach the tablet to personal computer or laptop using USB cable. After that, reset the installations to the factory (the so-called Hard Reset., details).

Lack of memory

Sometimes the tablet computer does not turn on due to lack of memory. Remove the card and try to turn on the device without it. Clean the OS from recently installed applicationsRemove unnecessary. Programs incompatible or incorrectly installed, overload rAM. Also avoid forced system shutdown. In order not to delete files responsible for its operation.

After removing third-party

If the gadget stopped functioning after removing the application, then refund to factory settings will help:

remove the flash card and sim card
simultaneously press the volume button and POWER
move on BIOS items using the volume buttons, select - POWER key
select item - Wipe Data / Factory Reset

Be prepared for loss of personal data.

Before installing any software, you must make sure to compatibility with the device. For example, such a program as Paint Tool Sai, perfectly operating on powerful devices. But after the launch of which a simple tablet (DNS, DESP, Supra, Digma, Equator, Tehtei, Explai, Thomson, Nexus, Prestigio, etc.) freezes and ceases to respond to any actions, since it is not intended to install this according to characteristics. . After deleting this application, graphic drives fly and violate the PC. For such a program, only graphic tablets are suitable, such as Wacom Intuos. Do not ship what is not intended for the apparatus and then it is not necessary to ask the eternal - "because of what."

After flashing

The process of flashing requires some skill, so unsuccessful intervention often leads to the loss of working capacity of the mobile PC. Most likely the firmware version is incompatible with Android OS installed on the gadget. In addition, if the cord disconnected in the process, this is a guarantee of "oxidizing". We recommend roll back to the initial state or take advantage of low-level utilities To restore performance.

If disconnection occurred during the firmware and data transmission was interrupted, it is necessary to make a re-setting.

There may also be fault of the developer of updates - they were incompatible with this version of Android. Return everything to the initial type and disable the update in the settings. At least yet do not make sure the reliability and performance of these updates. Load the update suitable exactly your model - Huaveway T1 701U, Acer W700, Samsung GT-P5100 Galaxy Tab 2, Samsung Galaxy Note. 10.1 GT-N8000, samsung Galaxy Tab A 10 5 SM T 595, Samsung SM T311. Heavier to find updates and firmware to little-known and cheap brands - 4Good Light AT200, IRBIS TZ720, LG G Pad 8.0, Oysters T12 3G, Oysters T72HM 3G, Prestigio MultiPad PMP5580C, Ritmix RMD-1050, RoverPad Air Q10 3G, IRBIS TZ178, WEXLER TAB 7b, 3Q Tablet PC Qo RC0721B, Chuwi, Dexp, Turbo Cides, Smart and TD.

If when loading OS is dropped or hanging on android logoSo not everything is lost and you can repair yourself. Restore the tablet PC from the line of bricks can be using recovery programsBy installing it on the PC and connecting the tablet. But with each concrete model need to understand separately general Instructions not.

This happens after incorrect flashing, or installation of software with access to ROOT Rights. First of all, try reset to factory installations through the Loaders menu (Recover Mode - Click the On button + Volume Up). If this option did not help, then refrain the device's official, stable version of software.

Flashing or pools screen

Careless attitude towards the tablet leads to a disruption of the display of the display and other components. The strongest shock or drop may result in disruption of the screen. The most frequent is the disconnection of the display of the screen module. To restore, open the device and install it in the appropriate socket.

After the fall damn the matrix, the touchscreen. The display will begin to rich, strip, show "partially", does not turn off. The hand is needed here. And be prepared for expensive repairs.

Program failure is the most rare cause of the twinkling of the display. Reset to factory settings will help here. In the most extreme case, reflashing the stable version of the software.

Also, stripes and flashing may appear from overheating gadget or water from entering water.

Not loaded further logo

If the screen is lit (works, but black), and the device hangs and does not load, measurement after entering the password. Use the Reset button - Reset. It will help if the operating system boot stops occurs. If you did not find a reset on your tablet PC, then try cleaning the cache:

Press the power and volume key at the same time
In the Select Wipe Cache menu
Select the inscription Reboot System Now

If this does not help, then in the same menu make a reset of settings.

And finally, if the new apparatus has not reacts to the power button, it is possible that the device has occurred from long non-use full discharge Battery. Connect the tablet K. charger And wait. It is necessary to carry out several charging / discharge cycles so that the battery element came to normal. If it does not help - change the warranty.

If the tablet starts, but does not function properly - make cleaning with antivirus through a secure mode, delete third-party applications. Clean the cache. So it will be possible to save personal data, but get rid of slag in the system.

We have disassembled the reasons and now it is clear that most problems with the tablet PC can be solved by resetting the settings through the entrance to the hard recovery.

conclusions

Careful attitude towards his beloved device is the key to long functioning. Timely replenishment of energy, careful loading of third-party software - it only contributes to the lengthy and fruitful use of the gadget. Do not forget to clean the RAM, do not overload the device and then you will not have to look for answers to the question "Where to run and what to do" if the tablet has ceased to turn on. You can repair it yourself, but if you are not sure about your abilities it is better to trust specialists.

Now we'll understand why your phone android does not load on the logo (does not turn on after the manufacturer or robot screensaver). Further in the text: first about the reasons and then decryption what to do in one way or another.

This article is suitable for all brands producing phones on Android 10/9/8/7: Samsung, HTC, Lenovo, LG, Sony, Zte, Huawei, Meizu, Fly, Alcatel, Xiaomi, Nokia and others. We are not responsible for your actions.

Attention! You can ask your question by a specialist at the end of the article.

If you divide all the reasons why your phone on Android hangs on the logo screensaver and does not load further, then this will be

errors in software (it is possible to eliminate yourself);
problems with "hardware" (only in the service center).

Causes of breakage and why turn on, but not loaded

⭐️⭐️⭐️⭐️⭐️ If Android is not loaded on the phone or tablet when turned on, or the smartphone on Android starts, but does not go further the logo screensaver, then the reasons for this may be the following:

Errors when firmware device. These include installing inappropriate or damaged assembly, violation of the firmware order, power failure, and other factors.
Lack of memory. The system may not be launched or due to lack of memory. The solution can also be deleting unnecessary data.
Incompatibility with memory card. If the smartphone turns on, but not loaded to the end, try learning the memory card and try again to start the system.
Hardware problems arising after impact, fall, fluid contacts, effects of extreme temperature.
Damage to the power button or its plume, which "closes" the phone and it goes to cyclic rebootBy loading to the logo and then in a circle. With such faced periodically and diagnose only in the service center.

Before trying to eliminate the problem in the work of Android, it is necessary to understand why the system is not loaded.

Restoration of workability

If the phone shows that the charge goes, then the causes of the problem must be sought in the work Launcher Android. If the device vibrates, or it flashes the screen, that is, the probability that the screen is damaged.

If you have determined that the problem has a software character (for example, the problem arose after the firmware update), then the simple reboot does not help here. Need to dump the system through Recovery Mode. Or reflash the device. Let's see what to do:

Holding the power button and the volume reduction key (there may be other combination, look for your model), go to Recovery Mode. If the phone means problems are on a deeper level, so you need to contact the service center.
Reset to factory settings by selecting "Wipe Data Factory".
Select "Reset" to restart the device.

Personal data and user settings will be deleted. If this method does not help, perform flashing. To do this, throw the file with a suitable firmware to the root of the memory card, insert the drive to the phone and select the Install Zip from Sdcard in the Recovery Mode.

Increase

You can cope with the software selection yourself, but how to fix hardware problems? The most reasonable option is to contact the service center for diagnostics and repair.

Removing information from Android disabled

Even if the problem can be solved without financial investments, the usual flashing, users arise an important question - how to save the data that is stored in the phone's memory. There is no problem with the memory card: you just need to pull it out of the device. But how to save data from internal drive? For example, pull out contacts.

Increase

If you did backup The system or at least, then get the contacts will be very simple. You just go to the "Contacts" app on Google to see full list synchronized contacts. If you want to transfer them to another device, it will be enough to add a Google account on it.