How to reanimate charging from iPhone. How to correctly charge an iPhone, including charging from ipad, non-original and without charger. Leave the iPhone on charging all night

Today it is impossible to imagine a modern person without a mobile phone. However, how can not be imagined and electronic gadget Without related to the full-fledged operation of the additional devices, the presence of which is mandatory. For example, the charger failed will observe the "dependent" apparatus for "energy death". However, the question of how to charge an iPhone without charging, given the great popularity of the "yield" Apple brand, requires special lighting. To your attention will be presented by several of the most original technological innovations, allowing "pumping" Californian gadgets so necessary to their batteries by force of electricity, of course, without the "participation" of the standard stipulated memory.

In search of promising technologies

First of all, the question requires some concretization. After all, each of us is known that without the impact of a certain type of energy, none of the well-known inventions of the "human genius" can function. Therefore, the question of how to charge the iPhone without charging is not yet a full-fledged answer. Of course, some attempts of developers, change the principle of "life support" of the phone crowned with success. It goes without saying, the standard memory will in the near future will undergo fundamental changes. The problem of "expedient versatility" already has several fundamentally excellent solutions. However, today it is still not possible to "globally reject" mobile units from the habitating power outlets. However, how to charge an iPhone or other "brainchild" of the electronic industry, when there is no access to the "benefits of civilization", is already a really feasible reality. But low efficiency (efficiency) developed and, by the way, serially produced devices and at the same time not a thorough thoughtful of the "mechanism" of supplying a certain charge power somewhat distance from being a full-fledged alternative to the source 220 W or other nominal value of the generally accepted standard of centralized electrification. As a result, we are seeing an ever-increasing need for and genuine interest in manufacturers ... It is these facts that make developers to find the most acceptable technological solutions.

Overview of the most efficient ways of "energy supply" without the use of a standard power supply unit

Method number 1.

Perhaps, let's start with the most elementary, but not always available variant of the energy supply of the mobile device. Perhaps you do not know how to charge an iPhone from a computer. So let's consider this charging method, which, as you understand, implies the use of a laptop, tablet or device equipped in case the working battery level has become critical, and your device "Tired" to warn about it - blinked the screen and went out, you need to connect it To anyone available deviceWith the necessary port. Thanks to which you will be able to answer the question of how to charge an iPhone without charging, practical action.

Not demanding method number 2

To date, you can purchase a case with charging. That is, a structural feature of such a device will be the presence of a built-in battery, the container of which varies from 1500 to 3200 mAh. Which allows you to use the phone without feeding a long time. A comfortable case is not only ergonomic and aesthetically attractive. The sought-after device will help effectively solve the problem of how to charge an iPhone without charging, as well as give the shockproof device to the device. Moreover, protection against mechanical damage to the back of the iPhone is guaranteed in any execution of the charging case. The indicator on the front panel of the device shows the battery level, due to which the user can always visually determine the degree of performance of the auxiliary battery.

Not really easy way №3

Of course, IQ technology is a definitely innovative version of a wireless charging - contributes to the effective "refueling" of the battery capacity without a difficult point due to the connection to the 30-pin connector connector. The question of how to charge an iPhone without charging will cease to express the intact of hopes. At the same time, the comfortable method greatly facilitates many operational tasks, and in particular is the most gentle way to restore the electric potential of the AKB. Since wear and damage to the iPhone contact site is a regular inevitability caused by the intensive use of the phone, as a result of which the device often has to be fueled. An attractive design of the module, which is the intermediary element between the charging station and the battery of the mobile device, is mounted on the back of the gadget, and the installation process is not difficult and does not require special tools and installation skills. In the market, this is products that are presented in a diverse designer performance. Color, texture and material "Intermediate tool" for the user are available in virtually any preference. The only disadvantage of such a memory can be considered necessarily the accompanying process of the "upgrade" of the device, which increases the "Waist" of the smartphone to several millimeters. However, sometimes the question of how to charge an iPhone is permitted not only in this way ...

Advanced Method No. 4.

Today, the IQI Mobile project presents a slightly improved version of the new standard. Despite the "freshness of ideas", the market for mobile devices is currently visible to the all-increasing trend of consumer demand. Widespread recognition in user circles, a qualitatively modified zoom allows the wireless "fill" of electricity in the battery of the phone. The main advantage of the novelties is a critical reduced induction plate (receiver). The problem of how to charge the iPhone without charging and at the same time not "to disappear" design, quite becomes solvable. After all, the thickness of the additionally installed element is only 0.5-1.5 mm and is practically not noticeable under a thin layer of silicone rim. This fact is beneficial to allocate IQI Mobile from previously implemented wireless power standards. An important content can be considered a connection condition: A flexible connection to the Lightning port does not make it difficult for subsequent user actions, which are primarily associated with the use of 30 iPhone Pinov. Agree, this makes it much easier for many moments of compulsory access to sometimes the most necessary system connector of the mobile unit.

Several arguments in favor of a wireless memory

• No mechanical connection torque (direct contact).
• The possibility of safe operation in an unfavorable environment (moisture, dampness).
• The comfort of use (mainly).

A little about shortcomings

• Cost, size and weight increase.
• The time parameter of the useful effect of electrical energy is significantly higher. standard option (Considering the efficiency of the original memory).
• No opportunity to use the phone while charging the battery.

Summing up, or energy prospects for iPhone

How to charge your device from the computer, you know. But how to be when you hike or found yourself in a situation where there are no standard power sources? To date, there are devices that are able to charge mobile devices using alternative methods for producing electricity. These are original technological solutions in the form of converting devices converting mechanical, thermal, kinetic, magnetic and other types of energy into the voltage and current required to your device. Of course, minuses and flaws in affordable devices are much larger than I would like. Price, weight, dimensions and other shortcomings are hampered on the way to achieving absolute perfection. But time is coming, and technology develops ...

The most weak link in the iPhone has been considered a battery for many years. With an average load, it is able to hold the device offline no more than a day, after which the gadget will be completely discharged. You may not be familiar with this problem only if you use it to make 2-3 calls per day with medium duration 3-4 minutes.

Of course, Apple's branded charger provides the resumption of the full capacity of the battery for 1 hour, but if you go on a long journey, to find a socket on time - this is a real problem.

In order to resume the battery charge, you can use various sources of energy: from USB portoral computer to special covers. The choice depends on your preferences and affordable programs.

How to charge the iPhone without charging on road conditions?

It is worth noting in advance that using the non-original charger or Apple's not approved by the company charging methods, you risk damage your smartphone or even get injured.

Charging iPhone via USB Computer Connector or Car Engine

To do this, you need a standard USB cord for your phone (30-pin for old models and lightning - for all models, starting with iPhone 5). Using it, you can charge your smartphone from any computer, laptop or tablet having a USB connector. You only need to connect the cable to the mobile phone and the computer, after which the charging will almost immediately begin. In addition, if there is a car radio with a USB connector for connecting flash drives, you can use it to recharge the device.

How to charge an iPhone without charging using IQI Mobile?

iQI Mobile is a small (thinner and less plastic card) an external antenna designed to obtain electricity from the Qi wireless charger. It is fastened outside the back cover of the smartphone using adhesive tape, after which they are connected to the LIGHTNING connector. After that, a silicone case or pad that hide this "design" is on the device.

To start charging, it is enough to put an iPhone with an rear panel to the surface of a special stand that supports the Qi standard.

Iphon charging with an external battery

You will be able to any manufacturer if you get a universal external battery. It is equipped with a USB port for connecting a charging cable and allows you to quickly "resurrect" your smartphone. In addition, for iPhone there are special covers with a built-in battery (such as JUICE TANK Helium). This accessory It is enough to wear on the smartphone so that he can extend the life of the device almost 2 times.

The lack of most smartphones is that they quickly discharge. Unfortunately, Apple devices are no exception, so many users have a natural question, how to charge an iPhone without charging. Is it possible in principle? It is unlikely that you can make a few effort and significantly extend the time of its offline work with third-party charging devices.

We will tell you how to make your gadget worked longer, and consider the repair process of the broken charger For Apple phones.

Many smartphone owners are concerned about the problem that they quickly discharge

How to charge an iPhone without using a special device?

There are several ways:

• You can fill the shortage of energy using a USB cable - simply connect your device to a computer, laptop, tablet and any other source of energy through it.

Charging using USB

• Using an external battery or PowerBanks such devices are capable of recharged your iPhone several times to a maximum of one cycle of energies. External batteries are also charged via the network and are an excellent option for those who need to often recharge the gadget. They occupy a little place are produced by many manufacturers - be careful when choosing, too, do not save on them.

• Covers with built-in batteries. If you do not like to carry a separate device with you, as in the previous case, you can buy a case capable of charging your iPhone. It also needs to be pre-"fill" with energy, and when you will be on the road, the cover will be able to provide several days of the gadget. Note that a similar result naturally depends on the volume of the battery itself.

Case with built-in battery

And, of course, many such a fixture will seem even better output than an external battery, since the case additionally performs another basic function - protects the device from damage and scratches.

• Solar panels. They resemble PowerBank something, but they do not need to be charged from electricity. All you need is to connect the phone to the battery, put it on a sunny place and wait a bit. It is very convenient, especially in summer and spring, when the days are longer and the sun shines stronger. In addition, this option is better what you do not need to pre-charge the battery - solar energy will become an excellent output when you cannot connect to other sources.

Solar panels

• Fire devices. Yes, you can charge the battery using a real fire. For this there are special blocks that convert heat into electrical energy. True, they are not so effective as other means, but in the extreme case will save the phone from the full shutdown.

Fire devices

• In the same way, there are wind generators that can be restored by the charge using the wind. If there is no wind, you can compensate for it with your own run, or use the device for walks, when driving on a bike. True, for full charge It will take 5-6 hours.

Wind generator

It is worth noting that in the future, charging devices in the form of a power supply with a cable may disappear, because they will become more common plates for wireless power supply. Why? You can mostly protect the connector for charging, which is quickly deterled due to the permanent use of the cable.

What if all these funds are not?

In this case, take advantage of the following recommendations:

• If there is a shopping center near you, try to search there chargers in recreation areas or shops. In addition, in the centers of mobile operators by default there must be network cables for most telephone brands.
• You can go B. service center And ask to charge the phone - even if money wanted for the service, it will cost it inexpensive.
• There are special terminals for charging - they are installed in the same entertainment complexes, also cost inexpensively.
• Chargeed iPhone, turn on the airport - with this method of work, all communication modules are deactivated, which are most eaten the battery charge, and you will fill the energy reserve much faster.

How to fix charging from iPhone?

If you have a charging for iPhone, and you are confident in your abilities and opportunities, try to repair it yourself. To do this, follow the following:

• Cut the plastic shell at the end of the charger so as not to hurt its insides. We are talking about the thicker end of charging.
• Cut the cable where it broke.
• Remove the protective winding to have access to 3 thin wires, which must also be visible from the plug.
• Remove insulation from all wires, but so as not to damage the metal core.
• Connect together all wiring in colors, wrap them with a tape.
• The isolate must be imposed so that no bare wires remain.
• If you wish, buy a heat shrink and put it on that part of the wires that you have repaired.

After all of the foregoing, you will know how to charge an iPhone without a main device. We recommend that one of the funds to recharge can be able to always remain in touch. And, of course, you can always try to fix the network device yourself - as you can see, there is nothing too complicated.

Many of us fell in a situation where the iPhone in the middle of the day is about to discharge, the smartphone shows only 10% of charging and flashes threateningly red, and there is no charger at hand. And at the same time we are in the city center, there are no friends nearby who would lend a charger. What can be taken in this case? We offer five useful tips.

Such obvious tips, as always carry a charging with them or not requiring a portable charger, does not make sense. Moreover, in the megalopolis, each second owner of the smartphone always has a charger with him. But after all, it happens that we can simply forget to take this vital thing with you, after leaving it in another bag or on the bedside table. Therefore, let's try to decide what to do if no charging, no portable charger in your arsenal.

1. If you are in some shopping center or not far from it, then find a store in which there are lockers for recharging. Usually, in some stores of well-known networks there are small cabinets with chargers for various connectors. And while you will try clothes - your phone is charged.

There is a similar service, for example, in the Moscow bookstore on Tverskaya Street. Contact a request to charge the phone into the information department - you are unlikely to refuse.

2. Another easy way to go to any salon cellular communication And ask to recharge the phone. The likelihood that you will refuse, very small. But it is best to contact the salon of one of the operators in such cases - in some such services are granted themselves. In addition, in cellular salons there are chargers for all models. You can also go with the same request to the electronics store.

Whether this service will be paid - depends on the seller. However, if you have to pay, then a little - 50-100 rubles a maximum.

3. There are special terminals for charging phones. Unfortunately, there are not so many of them as ATMs and payment terminals. Usually they are located in large shopping centers, in a cafe, waiting rooms at train stations and airports. In the terminal cells there are several wires that are suitable for all models. It costs this pleasure about 50 rubles per hour.

4. Smartphones are known for discharged faster than ordinary phones. It happens in different reasons. We want to tell you about several more Lifehaki, which will speed up the charging process and save energy on your smartphones.

If you have very little time to recharge, then turn on on your airrest - and charging will go much faster. You can also simply turn off the phone at the time of charging. The smartphone will not spend energy, but will receive it much faster.

5. If you do not have the ability to disable the phone or activate the airrest, since you, suppose you do not want to skip an important call, then try to disable unnecessary functions. It can be GPS, Bluetooth, LTE. All these functions take part of the energy on themselves. Disconnecting them, you can speed up the charging process slightly. During the work of the smartphone, hold these functions off if they do not use them directly. So your smartphone will be discharged slower. Also there is classic helpful advice To save energy - reduce the brightness of the screen and the screen of the auto power off the screen in the settings.

We all came across the situation when the smartphone charge begins to decrease right in front. Many decide that it is time to change the battery, and some think over the causes of the rapid battery discharge. And the second will be right, since knowledge of properly operation Batteries will allow to extend battery life for years.

How to charge Apple devices

It would seem that everything is simple - insert the charger cable into the gadget and in the power grid, and the rest of the work will make electricity. However, this is a delusion and such a feeding device of your device can harm the battery.

Manufacturers and specialists by research, trial and errors created a number of recommendatory rules for use batteries iPhone., iPad and iPod. Other devices whose batteries are created on a lithium-ion basis, it also concerns.

1. Cut the full discharge cycle of the phone no more than once a month. To do this, it is necessary to completely drain the reserves of the battery, after which run the charging process, and, not including the device, to bring the level of charge to 100%.
2. Charge the phone as often as possible. The recommended battery level must be kept within 40-80%. Frequent charging is the movement of electrons inside the battery and the absence of the ability to bring energy-intensive elements into disrepair.
3. Do not bring the battery charge to 100% (except in the cases described in the first paragraph). Your device works from the battery, not from the network. Upon reaching the maximum charge, the battery continues to be used, and this leads to its discharge by 1% and less, which launches the charging process again. Such microscopic battery feeding is harmful to him, so it is not recommended to put your device to recharge all night or all day.
4. Observe the temperature mode, especially during the charging of the phone. The increase and cooling temperature leads to physical deformations of batteries. Optimal temperature for active use And charging gadgets fluctuates in the range of 20-24 ° C.

Can I charge the iPad iPhone charging

There are no prohibitions to use "alien" cables of charging devices to feed your iPhone. But it is worth remembering that the plug must approach the phone connector. For example, it is extremely recommended to try to charge the iPhone using a charging cable from thin Nokia. And others unsuitable for this purpose plugs. It is also necessary to work voltage in 5V, but it is an international standard.

Output voltage charging for iPhone, iPod and iPad is the same and equal to the operating voltage of the USB port - + 5V. What is written on charging is the maximum current that it can issue. But this does not mean that she always gives him. In any of Applevian devices there is a special charge processor that optimally chooses a battery charge current. It also limits the charging current at a certain maximum level if the battery is strongly discharged. The only difference is that the iPad battery is greater than the iPhone and therefore, to reduce the charging time, the iPad has a maximum charging current of 2a instead of 1a from the iPhone. Naturally, the charger must provide this current. Therefore, it is more powerful in the iPad. As a result, the iPhone can safely charge the iPad charging, as the IPhone charging current is less than the charger can give. By the way, on the contrary to charge Ipad charging From the iPhone, you can also, just the charge will go 2 times slower, as the iPhone charging can not give the required 2a.

https://uip.me/forum/index.php?showtopic\u003d12653

How to charge the phone from the computer, in the car or train

The charger is divided into two parts: power supply and a cable with a USB connector. As a result, everything that has a USB input and connected to a power source can recharge your device.

Most. simple example Computers and laptops are. You must connect devices using a charging cable and wait for the required charge level. It is important to remember that the laptop is turned off or in sleep mode will not charge the smartphone. Although for sleep mode, this function can be disabled:

1. Right-click on the "Computer" icon and in the drop-down menu, select "Management". Through the context menu of the "Computer" icon, go to "Management"
2. In the column on the left, click on the Device Manager item.
3. Open the USB Controllers tab.
   In the Device Manager, find "USB controllers"
4. Using double-clicking with the left mouse button, open the properties of each of the items called the "root USB hub". Double-clicking on the left mouse button Open the Properties of the "root USB hub"
5. Go to the "Power Management" tab, remove the checkbox from the "Allow shutdown of this device to save the energy". And confirm the change in the "OK" button. Remove the checkbox from the "Allow shutdown of this device to save energy" and save the changes.

Now your laptop will charge smartphones and tablets even in sleep mode.

As for the car, not many of them have direct devices for charging your phones. But in almost all there are cigarette lighters, which means that with the help of a simple device, which is called the "bullet", you can connect the phone to the power source.

With the help of a cigarette lighter adapter, you can charge the smartphone in the car

The possibility of using the electrical network in trains is fully implemented. In every car, be it reserved, coupe or sv, there are the most ordinary outlets. Of course, their voltage varies in a specific range, and it affects the charging speed of the gadget. The main thing is that you only need cable and network adapterTo start feeding the battery device.

With help standard Set For charging, you can recharge the phone in the train

How to use wireless charging

Not the most new technologywhich only recently found the application in the charging system of portable devices. If you omit incomprehensible terminology, the work of the wireless phone charging is based on the principle of inductance.

The wireless charger consists of two parts:

As a result, we get a phone case, with which the magnetic cushion can charge the device.

To the advantages of this type of charging include the fact that the lack of cable removes all the risks associated with its use, whether to loosen the socket or shock with a bad insulation. Among the minuses, you can highlight a small range of such a device: the phone can be moved and thrust over the surface, but it is impossible to tear up than several millimeters.

Video: how to use wireless charging for iPhone

How to use a universal charger

"Frog" is a universal battery charger. With it, you can charge an absolutely any mobile phone or tablet battery.

With the help of a universal charger, you can charge any battery for smartphone.

Every year this charging method is applied more and less because of the availability of old models of mobile phones, increasing the reliability of new and inconvenience when using the "frog" itself.

The principle of operation of a universal charger is that the battery is charged directly from the network. To do this, it is necessary to get a battery from the phone, to properly connect it to the "Frog" alens and connect the power to inserting the charger into the outlet.

Difficulties are obvious. Open iPhone housing Or iPad is not so easy. It is not necessary to do without special tools, the use of which at home creates a big risk of damage to the miniature schemes of the device, enhancing the dust in the body, or its breakdowns.

Video: How charging "Frog"

Alternative iPhone recharging capabilities

Technologies do not stand still, they develop, become more mobile and progressive. Chargers do not fall behind: they promote the brand of alternative energy sources. All of them use wind energy, sun, movement and even fire in order to turn them into electricity and feed our devices.

Wind generators - small deviceswho, judging by the title, fueled with wind. The air movement causes the blades to rotate that with the help of simple manipulations, it gives energy.

Wind generators are not the most popular type of charger, as there is always a risk of getting into the zone of the calm

Where more famous way Energy production is solar panels. Scientists say that the Sun will cease to produce light and heat in about 4-6 billion years. This makes our main shining the source of inexhaustible energy. And let the batteries do not work at night, during the day you can do it with an excess.

On cloudy weather solar battery decreases

The following power supply is a dynamo machine. What could be more renewable than your own energy? The most inventive manage to attach a dynamo-car to the wheels of the bicycle, thereby freeing themselves from routine labor in favor of a cheerful trip.

Dynamo Machine can also be used as a power source for charging a smartphone.

These devices are on sale in almost all specializing on the technique of online stores and have USB ports for charging phones.

How to speed up the device charging device apple

Each of us at least once in life hurried and at the same time was with a discharged phone. Now, smartphones are not only a means of communication, but also an organizer that connects the link with email, notepad and so on. Therefore, it becomes necessary to charge the phone as quickly as possible.

There are several ways that allow you to reduce battery charging time:

Each of us at least once fell into a situation where the phone is discharged at the most inopportune moment, and there is no charger at hand. This is especially annoying when at this time it is necessary to make a very important call or urgently use the phone data. This article will tell you how to avoid awkward situations and how to find out of them when it seems that it is no longer.

If the charger in the bag was not found, and the smartphone is necessary for you now, then you should not ignore your hands, in our time there are many technological new devices that can save you in this weighty minute.

The easiest and apparent at first glance is the use of a laptop or PC as a power source, that is, using a USB port. To charge your phone, you need to have a cord for charging with you, and instead of the power supply, use your PC or laptop, connecting one end of the cord in iPhone, and the other to the computer. Of course, the charge rate will be slightly smaller, but you are already saved, the rest is only waiting for a little time.

Charging with third-party power supplies

Many accessories have been fixed on the electronic goods market, with which you can successfully replenish the charge of your battery. It can be PowerBank from various manufacturers and a variety of firms portable drives. The system of their work is extremely clear - you connect the gadget to the phone and enjoy the result.

1 With a portable battery or as a differently called Power Bank, you can not worry about how much percent on your phone, because you carry a "second battery" with you. At the moment, the choice and pricing policy of such devices is very large, and you can find exactly the one that in color, price and characteristics will arrange you.
2 Portable batteries running from nature. Not so long ago, the devices appeared on the shelves have already won the hearts of lovers active rest. If you got a phone, and you are high in the mountains, on the sunny beach or, perhaps just in the country, you will be suitable for power supplies that will help to charge your smartphone with fire, wind or the energy of the sun. Each of these methods is actually very simple and easy to use.

How can I charge without a cord?

To charge your indispensable gadget without using a cord, there are several innovative types of energy sources. Especially for iPhone 6 and other models developed very stylish and comfortable, both for work at the desk and at home, charging iqi Mobile, thanks to which you can forget about a pile of wires. Just just once one time to place it on a horizontal surface convenient for you and the phone will always be at hand. This type of charger is suitable for models: iPhone 5, iPhone 5S, 5C, 6, 6 +. Unfortunately, the iPhone 4 such a type of device does not support.

You can also charge an iPhone with a special cover Smart Battery. Case. It fits K. models iphone. 6, 6 +. One part of this case is flexible enough to be able to insert or get an iPhone. Being in charge in such a case, 2 steps of charging will be displayed on the device's navigation panel - the built-in battery and cover. Using such an affiliation appears the ability to talk on a cellular communication about 25 hours or to surf the Internet spaces for about 18 hours. Maximum convenience, when turned on, make this belonging to the top, because in order for it to work, you just click the power button and ready.

Charging in public places without charger

It happens that you went shopping into a shopping center or decided to drink a cup of coffee with friends, and your smartphone suddenly gives an ominous red battery. Even if there is no charger at hand - there is a way out. In addition to a variety of accessories, there are very comfortable and effective methodsHow to charge an iPhone or another smartphone if you are in a public place. We can offer you some of them:

1 Special terminals for charging devices. These are special cells inside which there are several types of charging cords, you can leave your phone there for a while and return to him when you wish, and he will already wait for you with full battery And ready for further use. Such cases are only gaining popularity, so you can meet them within the airport buildings, railway station, large shopping centers and cafes.
2 If you are in a cafe, then most likely you can ask for a barman behind the rack or waiter to put the phone for charging for a while. In almost every cafe there is such a completely free service. 3 Walking along the shopping center you can go to the corporate store of your phone or any other electronics store and ask to put your phone a little recharge. You are unlikely to refuse, because in such stores there are charging almost on any model of the phone. 4 If you are behind the wheel, you should not get upset by going to the gas station while your machine will refuel, you can ask for a little recharge your phone, and at this time you have a cup of tea or coffee. This service is also free.

Lzheppologies or what is better not to do

The Internet is filled with many videos and detailed instructionsHow to charge the phone with fruits, such as apples and lemons. In fact, this will not bring any benefit, but can even harm your phone, and your charge for charging can break or burn along with the phone.

Also on the Internet there is a way where it is described in detail how to clean the wires on a broken charging or how to charge with a wire. We do not advise you to produce such operations without proper experience in the repair and skills for working with electronics.

PS.

1. You can translate the phone to Avio mode or "on the plane". In this mode, the phone will be discharged much slower.
2. If it is not possible to use the first option, then simply turn off GPS and other additional features. Also lower the brightness of the screen.

I have breakfast, you gonna get out of their houses, already dressed, the necessary things are collected, take in hands iphone. And you see that the charge remains 10-15%. Familiar situation? Well, if you move to the car, you can fow your smartphone on the road, but in other cases it is just a tragedy.

You have to look for PowerBank, release a place for it in a bag and burn the wires of the wires, allowing you to charge the smartphone and at the same time use it on the go.

While Apple did not "invented" quick charging, the correct algorithm of actions such:

1. Turn on airplane

Surprise, but many still do not know that the cellular module and Wi-Fi are the main consumers of energy in any smartphone. Disconnected them and charging will pass much faster.

And at this time, the data synchronization will not occur, geolocation and all network activity of the device will turn off.

2. Turn on the power saving mode

In iOS 11, even the switch is provided in the control panel, and in older versions of the system you need to go to Settings - battery And there to activate the toggle switch.

In this mode, the power of the iPhone decreases, some processes are disconnected, performance drops, but also energy consumption decreases. So not only charging will pass faster, but further during the day the device will not be so voracious. If you do not have time to "refuel" by 90-100%, it will be useful.

3. Leave the iPhone to charge

Now the main thing is to give the device to the feeder. Many at this time are already collected, stand on the threshold and do not know what else to do. Start playing games or just flipping photos. So the smartphone may not be easy to charge longer, but not at all get a percentage of energy.

It is better to reconside the collected things once again, make a plan for the day, twist your favorite spinner.

4. Remove all IPhone covers

The Council is relevant in the summer of more than ever. During the charge, the device will noticeably warm up, and if after the exit you will run on it resource-intensive programs or navigation - iPhone will seriously split. All this will not be better affected on the battery and will be uncomfortable.

If you wear a device in a case or case, for fast charging Take it out of protection.

5. Use a powerful charger

For quick feeding, do not try to charge the USB device from the computer. Take a complete power supply and connect to the outlet. If you find more powerful adapter From iPad, charging time will be reduced.

These things will help you charge the iPhone as quickly as possible:

 USB Power Adapter 12W

This block is much more powerful than standard: 12 W against 5 W. They are equipped with some iPad models, but also with charging the iPhone. He will cope perfectly. Smartphone charges almost twice as fast.

 Lightning cable for USB 2 m

The native cable from the iPhone is usually barely laid behind the desktop and pull it out for charging before going to work I do not want. Cheat another original cable but already two-meter.

It will convenient to place the iPhone in the corridor or hallway for quick charging.

 USB-C adapter with a power of 29 W

Such a power supply is supplied with 12-inch MacBook. For connect iPhone He can charge him. Of course, the charging time will decrease even compared to the charge from the iPad.

 USB-C adapter with a capacity of 87 W

The most powerful portable power supply in aPPLE LINE. They are equipped with voracious MacBook Pro.. He literally "rolls" the energy from the socket into the connected gadget.

 Lightning cable on USB-C

If you choose one of the last two blocks, you have to get such a cable. In them, no longer ordinary USB port, but a new Type-C, and still such a cable can directly connect the iPhone to the macbucks of the latest models.