How do I fix the iPad Mini's charging connector? What to do if the charging connector on iPad Air isn't working? Ipad air 2 how to change the charging connector

The charging connector of the iPad is connected by a loop, with motherboard... He is also responsible for transferring data, via a USB cable, from a tablet to a computer. It may fail unexpectedly due to rough handling or misuse. To solve this problem, you will need to replace the cable, connector charging iPad... For this procedure, you will need to disassemble the iPad, replace the charging cable with a new one and carefully reinstall it.

The main reasons why you need to replace the iPad charging connector flex cable:

• - iPad takes a very long time or does not charge at all;

• - iPad charges only if the cable is firmly held;

• - iPad is detected by the computer and transfers files using USB cable, only when tightly holding the cable;

The most common reasons for the failure of the iPad charging socket cable are:

• - Ingress of moisture inside "Aypad", which can lead to oxidation of contacts;

• - Inaccurate connection of the charging or USB cable to the iPad, due to which the connector may deform;

• - Using non-original chargers and USB cables to connect to a PC;

• - When charging in a car, adapters and accessories may be incorrectly selected;

In order to change the cable of the connector for charging the iPad, you must:

• - Gently peel off the touch iPad glass, pre-heated with a hairdryer. Under the touch glass is a ribbon that connects the glass to the motherboard of the tablet. The procedure requires care and caution. Next, you need to lift the glass of the iPad and disconnect the cable.

• - We put the glass to the side and disconnect the iPad c charging connector using a special tool resembling a spatula.

• - We examine all contacts for the subject physical damage... Creases, dirt on contacts, and the like.

• - Carry out the procedure for replacing the charging cable and assemble the iPad, in reverse order

ATTENTION!!!

ALL ACTIONS DESCRIBED ABOVE ARE CARRIED OUT AT YOUR SOLE RISK.

Connector for connection charger plays a very important role in any gadget. If it breaks down, it is not recommended to postpone repairs for long time... A faulty iPad Air charging connector prevents you from using the gadget after the battery is completely depleted. Also, in this case, it is impossible to connect to a computer for synchronization.

Causes of malfunction

The charging connector is one of the most vulnerable elements and fails for a variety of reasons. The main reasons why the charging connector isn't working on iPad Air include the following:

1. Ingress of moisture into the device leading to oxidation internal contacts and corrosion.
2. Mechanical damage due to strong impact or falling from a height.
3. Connector clogged with dust or dirt.
4. Intense use, resulting in abrasion of the assembly
5. Use of non-original and low-quality power cables.
6. Malfunction of the bottom cable, on which the charger connector is located.

How to solve the problem

If the connector becomes clogged, you can try to clean it yourself, but in more severe situations, you will need to replace the part. In this case, you will definitely need the help of professionals. The specialists of our service center repair the charging connector on the iPad Air as efficiently and promptly as possible.

Before starting execution renovation works free diagnostics are carried out, which allows you to establish the cause of the malfunction and find the best way to solve the problem. If it is necessary to replace the charging connector, original components are used, and the repair procedure takes only 1-2 hours.

In the event of a malfunction of the charger connector on iPad Mini, its operation becomes impossible. The charging connector on iPad Mini is compact and can easily fail.

Causes of malfunction

Exists a large number of situations in which the charging connector ceases to function. The most common reasons include:

• clogging of the connector with dust and dirt particles;
• moisture penetration into the tablet case;
• use of non-original chargers;
• breakage of the lower loop of the device on which the connector is located;
• the occurrence of an error in the functioning of the software.

Connector repair

Having discovered that the charger connector is not functioning on your device, you need to perform a few priority actions. In particular:

1. Check to charge the battery with a different charger.
2. Inspect the connector for blockages and if there are any debris, try to remove them.
3. In case the connector does not work due to a system failure - update software before current version and perform a forced restart of the gadget.

When all of the above steps have been completed and the charging connector is still not working, it is advisable to contact a specialist. The employees of our service center constantly solve similar problems and repair the charging connector on the iPad Mini using a specialized tool.

Free diagnostics allow you to determine why the charging connector is not working on the iPad Mini. In most cases, the connector is replaced to solve the problem.

Your iPad Air has stopped charging or is it charging very slowly? Most likely, you will need replacing the charging connector on the iPad Air ... Charging connector, which simultaneously serves as a connector for data transmission via USB cable from a tablet to a computer, is designed in such a way that careless handling of it can disable it. Also, the charging connector in the iPad Air could break during long-term use due to trivial mechanical wear and tear.

Charging connector on iPad Airmay break for the following reasons:

• ingress of moisture, dust or dirt into the device can lead to oxidation and corrosion of the loop;
• repeated inaccurate connection of the charging or USB cable may deform or damage the charging connector;
• use of non-original and low-quality chargers;
• the tablet was charged in the car using an unsuitable charger.

Repair of the charging connector on the iPad Air is carried out by replacing the damaged lower loop on new. If you need repair of charging connector on iPad Air, bring it to our service center... We will carefully disassemble your tablet, remove the damaged bottom train and put a new one in its place. Then we will put the tablet back and check it for full performance, after which we will return it to you with a guarantee for the work done.

Tablets from "Apple" quite often come to the service center due to the failure of the device with the charger. There may be several options for the occurrence of such a breakdown. Obviously, the problem lies either in the charger connector, in the charger itself, or in the device's battery. Self fix such malfunctions can only be dealt with with certain skills and the necessary tools.

Reasons why the charging connector (Lightning) iPad (iPad) does not work

The charger connector can fail for many individual reasons. The most common are:

• mechanical impact on individual elements of the tablet or on its body as a whole. Often tablet computers are subject to falls and shocks, and such an impact negatively affects the operation of the device. Such exposure can result in damage. motherboard control or disconnecting loops. In addition, very often they sin on a malfunction of the Lightning socket in cases of a banal rupture of the charger cord. Micro-breaks in the cable may appear if the iPad is dropped while charging;
• Moisture inside the tablet or on the case may also cause the charging connector to malfunction. Many people know that when interacting with water, metals tend to oxidize. It is the oxidation process that can cause short circuit between the pins of the power module, which will lead to a malfunction of the Lightning connector;
• the physical impact on the device does not depend on the owner of the device. These effects include temperature drops and power surges. It is no secret that in domestic networks, sudden voltage drops are a routine process. However, for Aypad, this is a serious test, which quite often ends in a breakdown in soldering or burnout of individual elements and entire modules of the unit. Therefore, if the reason for the failure of the connector for connecting the charger is a voltage surge, a simple replacement of this element does not guarantee the operability of the gadget;
• battery wear should not be ruled out. Many may think that the battery malfunction has nothing to do with the Lightning connector, but this is not entirely true. If the battery is very worn out, connecting the charger does not start the charging process. Each owner first of all sins on the charger connector, but the real reason for this behavior of the tablet is the depletion of the battery life.

It is quite obvious that in order to establish the cause of the problem with the charger connector, you need to diagnose the device. On its own, diagnostics are carried out according to the following algorithm:

• connect another original charger to the device. This will help eliminate the defect of the adapter. If the working charger does not start the charging process, then the problem lies in the iPad hardware;
• then you need to synchronize the tablet with personal computer... The fact is that the connector for the charger and the USB cable is the same connector. Therefore, if, when connecting the tablet to iTunes, the system gives an error or the connection does not occur at all, then most likely the problem lies in the connector;
• visual inspection can also help locate the problem. Quite often, the charger refuses to work when the socket is heavily clogged. Therefore, it is advisable to carefully inspect the connector for the adapter. Most Aypad owners carry them with them almost everywhere, therefore, the likelihood of a blockage is quite high.

Repair options in cases where the charging connector does not work (Lightning) iPad (IPad)

The only way to fix a malfunctioning charger connector at home is to clean it. The nest must be cleaned using non-metallic tools. It is most convenient to do this with a wooden toothpick, but it is best to seek help from specialists.

Repair of the connector for connecting the charger in the service center "APPLE-SAPPHIRE"

If, after going through the points described above self diagnosis, it was found that the problem is with the Lightning connector, or the reason could not be determined, then it is best to contact the APPLE-SAPPHIRE service center for help. The specialists of our company will carry out full diagnostics Your iPad, determine the cause of the malfunction and carry out repair work.