Is it possible to charge an iPhone from Samsung. What is written on charging iPhone, iPad and MacBook. Risks of using a non-original memory

Chaotic. Usually do it "on the go", as it is possible. Self put overnight, more than 7 hours. Let's look at how to charge the iPhone correctly.

Despite the fact that the charge of the iPhone is a simple process, it is still worth considering some details

Just purchased an iPhone is important to charge correctly, only then it will last properly for a long time. If you want to know how to charge an iPhone correctly, follow the first cycle according to the instructions below.

After driving a new iPhone, connect for 3 hours to the charger.
After 100 percent, disconnect, use it until the battery is completely discharged. Be sure to charge it completely.
When the smartphone turns off, leave it for 2 hours, do not use it.
Next, it is necessary to charge anew to 100%, during the process do not use the device.

Night charging

Let's look at what happens to the smartphone when attaching it to the power adapter. The process of all modern gadgets controls the built-in module in them - the charging controller. It helps to charge the smartphone for the maximum possible, while a reasonable time frame. He does not give a rechargeable battery. It is necessary to consider here that 80% charges quickly using the maximum current strength; The remaining 20% \u200b\u200bat a slow pace, reducing current strength to extend the battery life.

When the process is completed, the controller turns off the power supply. The battery does not pass the charge, remaining in idle, and does not lose it. Approve: after 100%, the cyclic recharging / discharge regime comes, but it is incorrect, because then wear would be faster.

It is also known that all batteries are subject to self-discharge process when there is no connection to power sources. The indicator of the self-discharge in lithium polymer batteries is 5% per month. The controller checks the residual reserve when the loss is significant, the process begins again. It renews with a loss of 2%, i.e. approximately every two weeks. When leaving the gadget connected to the power source, it will be charged for a month 1-2 times.

Consequently, when leaving the phone connected for the night, it is not applied to him.

Power adapters

All Apple adapters give voltage in 5 V, differ in current power, power.

Standard power source in 1 A (amp), 5 W (watt) performs a full charge of the phone for an hour and a half approximately.

Consider the question: Is it allowed for the iPhone to use the power adapter intended for the iPad? Apple's official website claims: iPad adapter can be charged iPod models, iPhone. The power controller adjusts which current will be taken by the gadget battery. Therefore, contrary to popular belief, the iPad devices do not harm the iPhone.

The approval is also incorrect that the IPAD charging speeds up the process of charging the smartphone. Only 6 generation of gadgets is scientifically accelerated, previous generations do not possess such ability.

Chinese-made adapters

Considering how to charge an iPhone, do not forget to take into account the country of the adapter.

Car devices

It is also not recommended to use automotive adapters for charging the iPhone. They will not fence the phone from electricity surges. The power controller will be damaged due to the instability of the current strength, voltage of automotive power grids.

When the phone ceases to charge even from the original cable, the process passes too long, not completely, it means that the power controller is spoiled, which is more often the wine of the car devices.

Long storage

When you need to leave an iPhone for a long time, be sure to follow these steps.

Charge the device is 50%. Complete battery charging will cause loss of battery capacity. Fully discharged, it will go to the state of deep discharge.
Unable to turn off the iPhone.
Place it in place dry, with a temperature not higher than 32 0 C.
Recharge the iPhone every six months also up to 50%.

Charging rules

Special rules, how to charge an iPhone, of course, no. The power controller successfully protects the iPhone with incorrect handling of it. Do not use questionable devices, and you can charge your iPhone, as you are comfortable.

The above councils will prompt the right solutions in different situations. You can connect the power to your smartphone without fear of damaging it.

The ideal scheme does not exist, but still adhere to the generally accepted rules and manufacturer's recommendations.

the iPhone is an expensive device that, as a rule, we buy at least 2 years. At the same time, we feed the hope that after the planned service life, it will still work regularly and we will be able to sell it for "good" money.

One of the first, buyers, ask a question about the state of the device power source, for example: "How much does the battery hold?". So it makes sense to take care of the correct operation of the iPhone battery now.

As a power source in iPhones, Aipeds and other portable techniques, Apple (other manufacturers also) uses lithium-ion batteries, which:

Charged faster.
Work longer.
Possess an increased specific capacity.
Not subject to memory effect.

Under the effect of the memory of the battery, the reversible loss of the capacity, which takes place in some types of electrical batteries during a violation of the recommended charging mode, in particular, when recharging, not fully discharged battery.

As an owner of the iPhone and iPad with experience (since 2008), declare that Apple uses high-quality power supplies in their products.

1. Do not operate and do not charge the device in extreme temperatures (at -40 ° C and + 50 ° C).

Apple considers the ideal temperature range from 16 to 22 ° C and does not recommend "use the device at an air temperature above 35 ° C, as this may irreversibly reduce the battery capacity." Overheating is critized!

From personal experience: I do not look at the thermometer's column when I take my iPhone 5s in my hands, which I do not advise you. Enough to:

On the device on the direct sunlight fell.
Do not leave it in the car in the heat.
Do not charge under the pillow.

3. To charge an iPhone, use the original charger and at least a certified USB cable.

For example, if you increase the charge voltage of the lithium-ion battery, only 4%, then it will be twice as quickly lose the cycle container to the cycle. To prevent this, special PMIC controllers are embedded in the original network adapter and directly in the iPhone (in batteries it is Battery Management System) that the conditions for recharging the device did not go beyond the permissible: temperature, current and voltage.

In network adapters without a genus and tribe, the so-called "Nounemes", such a controller may not be. Consequently, the voltage at the output of such an adapter may exceed the valid values \u200b\u200band can burn the power controller in the iPhone, and then output the battery.

From personal experience: Charge the iPhone from original chargers certified cable and forget about the problems with the battery.

4. Do not discharge the iPhone completely (up to 0%).

The lifetime of the lithium-ion battery is accepted in the amount of full-digit cycles when you spend 100% battery capacity. For high-quality power sources, it is 400-600 cycles. Apple declares that the iPhone battery resource is 500 cycles, and the iPad, Apple Watch and MacBook - 1000 cycles.

Whenever you fully discharge your device, its life is reduced. So far the depth of discharge.

It turns out that the stronger you discharge the lithium-ion battery, the faster it "dies." To increase the battery resource, do not allow deep discharge.

For clarity, I will give the dependence of the number of battery discharge cycles from the discharge depth.

Not many know that Apple batteries are charged in 2 stages:

Up to 80% - in fast mode.
80 to 100% - compensation charging.

Such a charging system allows, firstly, quickly charge the device, and, secondly, extend its service life.

Remember, the full discharge of the lithium-ion battery reduces its service life and reduces the container.

From personal experience: Connect the iPhone and iPad to the power source at 10-20% charge and disconnect after 80%.

5. Do not charge the iPhone up to 100%.

Full charge of the lithium-ion battery is not as terrible as a deep discharge, but still undesirable. Of course, the controller will not allow the battery of your device to overheat and charge over the norm, but, as practice shows, the constant inclusion in the network of 100% charged iPhone reduces the time of its autonomous work.

From personal experience: Leave the iPhone on charging all night. For a while, a 100% charged device will be connected to the network, but nothing will happen to it - not that storage time to worry about it. With such a charging, your iPhone will "hold" for more than two years.

Chemical processes are difficult to control the battery. And since the dependence of the output voltage from the battery capacity is non-linear and lithium-ion battery is subject to natural aging, accompanied by a decrease in capacity, and also because we charge the devices as it fell, with time the power controller does not accurately determine the battery charge level. Diagnosis: iPhone turns off even when charging more than 1%.

In order to calibrate the controller and promote the charge indicator, the iPhone needs to be completely discharged. Apple advises to do it no more than once a month.

Conclusion

In conclusion, I would like to note that each of us charges your devices in your own way. If there is an ideal scheme, then it cannot satisfy everyone, since we live in different rhythms and in different conditions. Remember, the battery of your iPhone will be even if you do not use the device. Adhere to the rules described above (it is not necessary to follow them strictly) and even if your iPhone battery fails, it can always be replaced.

The latest Android smartphones have a quick charging chip. In Galaxy S5, SAMSUNG "quick charging" technology has become superbystroy. Motorola implemented in Droid Turbo charging technology, which in 15 minutes can charge for 8 hours. HTC has a Rapid Charger 2.0 charger, capable of charging the 2014 ruler devices by 40% faster.

In the new iPhone 6 and 6 Plus, we obtained larger capacity batteries, but no additional technologies for their fast charge. However, the way to quickly charge the capacious batteries iPhone 6 and 6 Plus (and other models) exists. About him, as well as how it affects the batteries of devices, will be discussed in this article.

In fact, the solution has always been literally in front of our eyes - 12-watt charging from the iPad, which gives a current of 2.1 amp. The question arises why Apple does not speak about this opportunity separately and can it harm your smartphone battery? As for the first part of the question, it is better to set the PR-Department of Apple, but on the second - you can answer, drawing information from this section of the official website of the company. It says that the iPad charger is compatible with other Apple gadgets, including the iPhone. It turns out that the company knows about such an opportunity and confirms it.

In fact, the parameters of the charger provide a slower charging process than is possible. A simple increase in the charge current with 500 Miliamper (or 1 amp) to 2 amps (IPAD charger) will significantly speed up the charging process.

You ask what it can cause consequences? Increasing the charge current will cause greater battery heating, which will also affect the reduction of its resource. Therefore, most people consider charging an iPhone with a bad idea charge. Doubt on this occasion can be disappointing in the basics of battery charging principle.

Isidore Bakhman, founder and head of Cadex Electronics and the author of the book "Batteries in A Portable World", in his book tells about the key indicator of the coefficient C (C-Rate), which defines how much charge can be safe for yourself to get a battery or speed with which The battery can be charged / discharged. To determine this coefficient, you just need to take the ratio between the charge value and the battery capacity in milliamperes. For example, for iPhone 6, when charging from Apad charging, this figure will be 2100/1810 mA or 1.16 C. For iPhone 6 Plus it will be equal to 2100/2915 mA or 0.72 C.

The batteries of most mobile devices have a charge coefficient about equal to one. Thus, the rate calculated above for the iPhone 6 and 6 Plus is in the safe range. Bachman says that battery manufacturers recommend using charging devices that provide the coefficient below 1 s, but such a minor excess, not at all cause for anxiety.

There is another moment regarding the rapid charge of the batteries of our gadgets. Each of them has a special PMIC controller responsible for the battery process. He "communicates" with the charger you use and requests a certain charge value required by the battery. That is, theoretically, this mechanism is able to protect your iOS device, as Apple clearly indicates the charge parameters. This technology is supported by Qualcomm controllers, which are used in iPhone 6 and 6 Plus, so you can safely state that the accelerated charging does not damage the smartphone and will not lead to a significant decrease in its resource.

Here are the statistics of charging my iPhone 5S connected to the adapter from the iPad. As you can see, 2.1 amps on the waters turn into the current that is necessary at a certain step of charging (see the "Charge segment now").

From personal experience I can say that I used this lifehak with Ipanda charging, since the iPhone 4. Just charged the phone with the adapter, which was at hand and at home most often it was an adapter from the iPad. The charge process accelerates more than twice and if you did not discharge your iPhone "in Zero", then for an hour he will be able to charge up to 100%. During this time, I changed several devices, but I did not notice any detrimental effect on such a charging. Yes, the battery is heated stronger, but no one forces you to hide an iPhone under the pillow during charging, right?

I am sure that each of you charge your iPhone chaotic way. Having a "reserve of the stroke" of the battery is equal to one astronomical day, we always try to recharge yourself ... Let at least 10-20%.

On the other hand, almost every night, our iPhone is "fried" for charging for more than 7 hours. In this article we will find out how to charge the iPhone And how similar uniform communications with the charger affect the life of the battery. Go!

Well, now one of you will say " Chorea-ah-k, what kind of game you rubbing us ... ???" I agree ... anyone never arises for the charge of the iPhone.

There are a couple of interesting nuances, about which not many know. So, all these nuances I tried to gather and lay out in one article ... for your general development! Read - will be informative and interesting!

If the iPhone is quickly discharged
If the iPhone does not charge at all -
Not included iPhone -
How to replace the iPhone screen with your own hands -
Replacing the IPhone Charging and Power Controller -

Correctly charge a new iPhone

There are many theories about how to charge a new iPhone correctly. I will tell you how it usually does it. There is nothing here, just, if you think about it, then the first pair of charging cycles is better to do according to the instructions below:

Pulling the iPhone from the box, connect it to the charger
After the iPhone charges to 100%, feel free to use it and bring to full discharge.
After the battery is completely discharged and the iPhone turns off, connect it again to the charger
Charge the phone up to 100%, without using them during charging.

Will be better if you do a couple of full charge / discharge cycles. After that, you can charge the phone as you used to do it before. About the rest of the nuances read below.

Leave an iPhone on charging all night?

In order to answer this question, it is necessary to clearly understand what is happening with your iPhone after connecting to the power adapter. Immediately it is worth saying that charging process Battery iPhone (like any modern gadgets) manages the built-in IPhone Controller Charging.

This controller does not allow recharging the battery, and at the same time trying to charge it in the shortest reasonable time. At the same time, up to 80% the battery is charged by a fairly rapid pace, and the last 20% on the contrary in slow motion mode.

Once the battery is charged, the charging controller turns off the power supply. The battery, as it were, be left alone, without passing and not taking the charge. Power of the phone itself in this case is carried out from the charger.

In other words, during this period of time, the battery is not charged, and does not discharge. Therefore, the myth that after reaching 100% charge, the battery goes into the cyclic mode of discharge / recharging, complete nonsense. If it were so, then the battery would be subjected to additional wear. That anyone actually does not need.

Well ... Now let's look at another fact. Any battery is prone to "self-discharge." This is a completely normal process of losing charge, provided that the battery is not connected to anything. Lithium-polymer batteries in the self-discharge indicator is 5% per monththat in essence is very small (in comparison with other types of batteries).

Charging controller, of course, periodically checks the balance of the battery and in case of detecting a significant loss of charge, will begin a new charging cycle. Such a situation will occur only after losing at least 2% of the charge, which in turn can occur more often than once every two weeks.

Thus, if you leave your iPhone on charging for a whole month, then it may be a built-in battery subjected to a re-cycle of charging one or twice.

OUTPUT: From the above, it follows that Leaving the iPhone on charging for the whole night, you absolutely do not in any way lose.

What power adapter use

Standard power adapter for iPhone (5V, 1A, 5W) Fully charges the average telephone number for about 1h 30. I can't say anything else about this adapter. Well, the usual one ...

A bit of the theory of Apple power adapters. All of them have a voltage of 5 volts (V), but a different current strength that is measured in amperes (A) and the power that is measured in watts (W). These three values \u200b\u200bare interconnected by a simple formula: V x a \u003d W.

Example 1: The power adapter for 5V and 1A has a power of 5W (standard iPhone charging)
Example 2: The power adapter on 5V and 2.1a will already be with a power of 10W (charging for iPad)

Is it possible to use the power adapter from the iPad to charge the iPhone? Answer to this question Yes, you can. And here the smartest of you must say " What are you soaring again! It is harmful to the battery!" Good good! Let's figure it out in this matter ...

The fact is that the automotive power grid is far from the stability stability / current stability, but those cheap car charging, which many use, can not protect the phone from surges in the car's power grid.

If you encounter a problem when your phone stopped charging, "doesn't accept" even the original charging and cable, it is charged for a very long time or not completely - most likely the problem in a damaged charging controller. And believe me, in 90% of such cases, car chargers are guilty.

If you really spend most of the working day on the road and it is vital to you to recharge the iPhone from the car cigarette lighter, do not climb when buying a car charger. It is better to overpay a couple of dollars, but get a well-quality brand name.

Personally, I like the company's products Ugreen.I wrote about. All products that I have acquired, inspire confidence and really works. The simplest on 5V and 1A (which is just suitable for charging the iPhone in the car) costs $ 6.99.

Long storage iPhone

If for some reason you decide to remove the iPhone for long storage, then be sure to follow the rules below:

charge your iPhone about 50%. Storage of a device with a fully charged battery can lead to partial loss of the initial capacity of this battery. And vice versa, if you store a device with a fully discharged battery, it can go into a deep discharge state;
Turn off the device;
Store the device in a dry place with no more than 32C ambient temperatures;
If your iPhone is going to fly on the shelf more than six months, charge it up to 50% every 6 months.

So how to charge the iPhone correctly? As you, probably, understood from the article special rules do not exist. The iPhone is built in the fool protection (it is the same power controller), so that any user can not bother about charging the phone. On a personal example - I used the iPhone 4s four years and charged it chaotic way.

Most often, he fully charged overnight, but sometimes it was necessary to connect it to the power adapter and during the day. And what happened to the battery for 4 years? Yes, nothing ... She is still holding a plus minus one day.

Therefore, about charging the iPhone is not particularly worried. Charge it when you want and how much you want. The main thing is not to use questionable Chinese charms.

Is it possible to charge an iPhone with a non-original Chinese charging? This question interests many IOS devices users, for example, being visiting without their charger. What risks arise and how to save your device from damage, tell me in this article.

Not so long ago, the media extended the news about the deceased Chinese woman using the iPhone during charging. As it turned out, it was killed by a large current current, which arose due to a sharp voltage drop in the network. The non-original power supply could not stand the load, and issued all 220 instead of the laid 5 volts, which was the cause of the death of the girl. This is the case rather an exception from the rules, such a thing is extremely rare, but still it happens, it is difficult to insure.

What will happen if you charge an iPhone of any model with non-original charging? Most likely nothing will happen to happen, in 99.99% of cases, the owner and the smartphone will remain safe and maintained, but there are still risks, we will list them.

Risks of using a non-original memory

The most harmless is a strong heating, usually, in addition to discomfort, there is no serious consequences.
The Chinese charger can simply not earn, the iPhone can issue a message "This cable or an accessory is not certified" and will end on it. You just throw money on not quality ketai.
Battery failure - if the cable is not certified by Apple, this can happen. The cost of the battery, for the bulk of the devices from Apple, about 1000 rubles - in unofficial masters and up to 3000 official representatives of the company.
The overwhelming power controller U2 IC, it is he who is responsible for the correct filling of the energy of the phone battery. When breakdowns of this module, the cellular ceases to load and submit signs of life, you will have to spend money on its repairs, and this is not cheap pleasure. The cost of work and chip can reach up to 5,000 rubles.
Fire tube. The consequences understand themselves, it is not only the complete destruction of the device, but also possible a full fire, with the loss of all property. It is worth remembering stories with exploding batteries on Samsung.
The current is likely, but she is insignificant.
There is a risk of damage to other microcircuits inside the smartphone, as a result of a short circuit, it already depends on your luck, it is difficult to predict what exactly fails.

Therefore, before using it is not native charging, it is better to think about and spend extra 500 rubles on the original, rather than you to pay for the repair of the blurred iPhone modules.

Two-ends stick

However, it is necessary to understand that not any original charger evil in the first instance. If the seller offers a cable with a Lighting connector for 100 p, it is better to give up the purchase of such a lace. At least you threaten the error "This cable is not certified", as a maximum - read about risks in the previous section. The charger is better to choose more expensive, at least 500-600 rubles, there is a chance to buy a high-quality thing, without falling on a frank Chinese fake.

If the situation is forced to charge the phone with another charging other than the standard, take advantage of it, most likely, nothing terrible will not happen 1-2 times. Do not do this systematically, the chance of exit damage to the device is significantly increased.

What voltage is used?

How many amps need to charge the iPhone battery? This question is concerned about the advanced iPhone owners. Information is necessary to choose to choose the power supply unit for cellular. It should be borne in mind that the iPhone itself adjusts the strength of the current using the U2 power controller, most often it suffers from voltage drops and burns out.

For a standard battery, the EPL smartphones need a charge current from 0.3 to 2 amps and a voltage of 5 - 5.5 volts.

If these values \u200b\u200bare exceeded, various problems of the hardware plan are possible. These are the scorched modules that have failed displays, dull batteries and other little pleasant breakdowns.
At the values \u200b\u200bbelow these indicators, charging will occur for a very long time, up to 6-7 hours. Therefore, weak power blocks are not recommended.

Using a computer USB port

Is it possible to charge the iPhone from the USB port of the computer? Completely, since the computer unit is famous for its reliability and ability to produce 5 volts, without strong, fatal for mobile, voltage jumps.

Some models of motherboards laptops and PCs can produce current strength in 2 amps, which corresponds to the official specification of EPL smartphones. It is quite safe from such ports USB, for the phone it does not threaten anything.

Charging from the power supply unit

What will happen if you charge an iPhone from the automotive power supply? By analogy with conventional power adapters, if you purchase a cheap Chinese, problems are possible, if you buy a high-quality corporate accessory, there will be no problems.

Automobile adapters from 12 volts for 4 volts, usually cost from 400 rubles per set of average quality and from 1000 rubles per premium model. Repeat, buy for 100 rubles. The product of Chinese producers should not, burn not only the phone, but also a car.

Conclusion

You can charge an iPhone with non-original charging, just carefully, it is not necessary to do it systematically. Every day, to charge an iPhone of the Chinese zoom to definitely not worth it, what can happen, read in the section about risks, everything is described in detail.

So what charger is best used to charge the gadget? Best native, so you eliminate the risks of burning the inputs of the device.

If the standard power adapter is damaged or its lace, the appearance of "this cable or accessory is not certified" may appear, the cable repair will be useless, it is easier to acquire a new one. A warning may pop up each time you connect not to native memory. Apple introduced a message with the appearance of iOS 7, to protect the users of smartphones from "self-configuration" with Chinese fakes.

Attentive treatment of equipment will significantly extend her life, remember this. Good luck to the meeting on the site pages.