Main functions. Main functions Standard set of buttons, indicators and connectors

Nowadays, it's already no news of 3D TV and glasses. This technology Already quite tightly entered the life of ordinary people. Almost everyone can afford such a TV. However, despite the fact that instructions are attached to the TV and points, many still wonder how to use 3D glasses?

Including 3D film on a special TV using glasses, many cannot achieve the desired effect. Instead of a surround picture, the audience see only muddy incomprehensible image. Because of this, many are disappointed in 3D TVs, not even trying to solve this problem.

1. How to use 3D glasses

In order to understand how to properly use 3D glasses should be dealt with how they work and how the technique of three-dimensional image works. This will make it possible to understand the principle of the TV and points, which in turn will help the viewer understand how to use glasses correctly.

So, the essence of technology is to provide two slightly different pictures - for each eye your image. Thus, the brain comes in two pictures, two options for the same object. The brain combines these pictures and creates one three-dimensional image. It is due to the fact that a person has two eyes, we can evaluate the approximate dimensions of real objects, their height, width and depth.

To date, there are three image separation technologies:

Anaglyph;
Polarization;
Active.

For each of these technologies only certain points are suitable. For example, for active technology there are gate glasses. If the video roller has an anaglyph image separation, then anagly glasses should be used to achieve 3D effects (blue and red lens). Accordingly, passive (polarization) glasses are used in the polarization separation of the image.

1.1. Stasive 3D glasses

Active (or as they are also called - gate) 3D glasses have such a name, because each lens has a shutter that is able to close and open more than 150 times per second. The essence of their work is that at the time of viewing the film the shutters open and closes alternately, providing each eye a separate image.

Everything happens so quickly that the viewer does not have time to understand anything, but the brain receives two pictures and turns them into one volumetric image. You can use such glasses only with a specific TV, which has an infrared transmitter, sending signals to glasses. Everything happens as well as with a remote control.

Setting 3D glasses with shutters is quite simple. To do this, they simply need to be enabled and synchronized with the TV. At the same time, on the TV, you need to select the image separation method that corresponds to the separation method in the film itself. Only after that you can enjoy a full-fledged 3D image.

1.2. Polarization 3D glasses

Polarized glasses do not require any configuration before viewing. You only need to configure the TV itself. In the settings you need to select the image separation method. There are 4 methods of separation by passive technology:

Vertical stereopara;
Horizontal stereo pair;
Frame stereopara;
Steering stereo pair.

It doesn't matter which method is used, the main thing is that the TV settings correspond to the video playback. The essence of the technology is that the video itself is divided into two streams. Each of their streams has different polarization - vertical and horizontal. Lenses in glasses also have different polarization. In other words, for example, the right lens completely blocks the stream of video with vertical polarization and skips with horizontal. Left lens on the contrary, skips a video stream with vertical polarization, blocking video with horizontal polarization.

Thus, each eye sees a separate image. Further brain turns two different pictures in a 3D image.

1.3. Anaglyph 3D glasses

Anaglyph 3D glasses also work as well as polarization. The only difference is that the separation of video flow occurs not by polarization. If you look at anaglyph video without glasses, you will see a muddy image with blue and red shadows.

The glasses have a blue and red lens. Thanks to this, the shadows are completely cleaned with glasses, and 2D video turns into 3D.

Anaglyph glasses, as the polarization do not require any synchronization and settings. All image settings are made at the TV itself, in order for it to execute the image by needing technology, be it polarization, anaglyph or active glasses.

2. 3D on SMART TV Samsung 6710 without Blu-Ray Player: Video

It is worth considering that to view 3D films you will need to download a 3D movie. Most modern TV models are not capable of turning the usual video into three-dimensional. Of course, some manufacturers already advertise televisions that have such opportunities, but their units, and they are decent. Therefore, do not forget that it is not enough 3D TV with appropriate glasses. Special video is also required.

2.1. Than wipe 3d glasses

Many wonder than wipe 3D glasses? After all, they, as well as ordinary sunglasses, are also dirty and can be shuffled. The answer is simple. You can wipe the same napkins as ordinary glasses. Of course, there are special wet wipes for 3D glasses, but it is nothing more than a marketing stroke.

In order for the glasses to serve as long as possible and did not scatter themselves to handle them carefully. Wipe the best napkin from microfiber. This is a material that does not scratch the lenses, perfectly removing dust and greasy spots. At the same time, it is not necessary to get involved in rubbing, since even the most soft materials leave microcarabs.

Over time, they become more. In addition, the polarization film also can be erected over time. Of course, this will require more than one year, but still, with proper care, you can significantly extend the service life of the glasses.

For drawing a 3D handle, special skills are not needed. In children, the magic marker develops motility, imagination and spatial thinking. By purchasing it for professional activities, you can create three-dimensional models right in front of the customer. The devices will be suitable even in everyday life, helping glue and repair plastic objects.

Interest in 3D handles exhibit everything from five-year kids. After all, it is so interesting - to create drawings that "come to life" in front of the eyes. Moreover, even the lack of ability to draw is not a problem. With the help of stencils and templates, you can easily make not only a simple toy, but also make a valid model of the car or build a mock of a whole city.

If you first work with fixtures

For volume modeling, it is better to carry out a small test before starting work:

Connect the power cord.
Expect when the indicators on the housing will notify readiness to work and achieve the desired temperature mode (change color).
Insert plastic into the download socket.
Slide the filament feed speed button to the desired position.
Translate the gadget to the working position.

Now you can try to switch plastic feed speeds to understand the principle of the process: how it is higher, the thicker the resulting image lines.

What can I draw a 3D handle

With the help of a three-dimensional marker, you can draw literally everything:

toys;
subjects surrounding us;
jewelry;
accessories;
layouts and models of real objects and things;
sculptures and portraits.

Starting with simple figures, you can further create real masterpieces.

How to use 3D handle

The products of the famous manufacturer of Myriwell use a large oculation. They comfortably fall into the hand, have a small weight and easy to manage. In addition to decent performance, 3D MYRIWELL gadgets are distinguished by the original design and affordable price. The consumable material is ABS or PLA plastic.

The box together with the handle is packaged standard set:

instruction and warranty card;
stencils for drawing;
a set of consumables (3 colors);
charger (12 V).

With the help of 3D pens, skillful hands can create amazing volumetric things. A little training, and everything will work out!

For example, consider how to draw a house 3D handle

The most primitive option that kids draw: designate a rectangular base on a sheet of paper, stretch from its corners by air vertical lines And connect all this roof.
More "adult" bulk house is easiest to draw a stencil, filling the contours of parts of plastic layers. After that, glue with 3D marker all elements with each other.
Another, more complex way to create bulk figures. Here you can feel the real architect. We draw a 3D marker on the sheet a reliable base of the future at home. Create a framework of paper from paper.

Drawing 3D handle - A fascinating process that does not require serious professional skills, so even children and novice artists can quickly learn how to use this device. The main thing is that it is necessary to obtain aesthetically beautiful and right figures - skill and experience.

Preparation for work

Before working with a 3D handle, you should carefully examine the instructions for the product, to purchase the necessary consumables in sufficient quantities and cook workplace. Better if it is the surface of the table, not completed. When simulating a three-dimensional figure, the space above the table will be required, so the free movement of the hands and the unimpeded connection of the ends of plastic threads in the air is extremely important. Relief movements can be sparkling or deforming the line in the process of plastic frozen.

Modern 3D handles It is quite convenient to lie in the hand, drawing them reminds the work of the usual handle. On a 3D handle, there is usually a display where the heating temperature and the rate of plastic feed are displayed.

The main elements on the 3D handle:

Plastic feed button (forward button) It is located on the heating element from the left side of the handle: for the right hand, right under the thumb, for the left, respectively, under the indicative. This button is the main one when working with a 3 d handle, it is she "squeezes" the plastic from the handle.
Button Back (Next to the feed button) - pulls out a plastic thread from the handle. It works only after keeping it for a few seconds to avoid random pressures.
On the right side of the handle are located plastic feed speed switching buttons. 3D handle from Anro Technology Supports up to 6 plastic feed speeds. Together with the temperature adjustment setting, various speeds allow any idea: from small parts to wide strokes.
Temperature adjustment buttons Locked on top near the display. A plus sign - an increase in temperature, a minus sign - a decrease. If you simultaneously click on the temperature adjustment buttons - the handle will switch to the type of plastic type selection mode: ABS or PLA (for different types of plastic, a different heating temperature is required).
Display. It displays data on the current velocity, type of plastic, the current temperature and the specified temperature. All indicators can be monitored and changed in real mode time.

If you do not use the handle for 2 minutes, it will go to standby mode to resume work, just press any of the buttons.

Getting started with a 3D handle

First, visually check the handle so that there are no obvious damage.
Connect the power adapter into a conventional outlet and in the 3D handle itself. The power connector is located in the thick part of the 3D handle housing. There is also a hole for plastic thread. After connecting the power, the handle will be in standby mode.
Before starting work, set the desired heating temperature by pressing the "plus" button - "minus" (if you press the button, you can quickly change the temperature values). For PLA plastic, the temperature of the work from 160 ° C to 200 ° C, for ABS - from 200 ° C to 240 ° C.
To get started, press the temperature button (the "forward" button). Hot-End Heating Starts. The display will indicate the temperature through the fraction: for example, 88/160 ° C. The first number indicates the current temperature, the second is specified. Heating occurs in less than a minute.
After heating, you can insert a plastic thread. It is desirable to cut the tip of the thread so that it is smooth, and also a little straighten the thread so that it is easier to insert into the handle. Inserting the thread into the hole, you need to press the button "Forward" for the supply of plastic, and hold the thread until plastic starts out of the nozzle.
Now you can proceed to drawing. After the end of work is better to get plastic from the handle.

Features of working with 3D handle

Before using a 3D handle in operation, it should be heated to the desired temperature. Selection of the optimal temperature mode as well as speed - The work experience, training and skill. Each individual tool has to be individually escaped. This occurs only in the process of practical operations on use. The heating rate depends on the environment.

Outlet of plastic from nozzle Begins a few seconds after pressing the plastic feed button. With the average supply speeds, plastic cools very quickly. At the same time, some time it remains plastic and it can be placed with his fingers, not risking to burn. At high temperature and the flow rate of the plastic may not have time to quickly stick when drawing in the air, however, you can simply be glanced and it will be too faster on it. Practicing in drawing 3D handle can be used and choose for yourself optimal settings and temperature and speed ratio.

Plastic to normal office paper Does not stick or easily lagging behind (can stick to cooled). In order for the plastic better sticking to the glass or metal, the surface is better to deprive in advance, wipe, and even better - to make a rough.

Remember that in no case no need to touch the hot nozzle (hot end) handles at work! With a long work, the tip of the handle becomes hot enough to burn! Work buttons and place where your hand is not heated. In power saving mode, the handle cools fast enough - 5-10 minutes.

Practice on one-dimensional images

Before drawing volumetric figures 3 D handle, It is advisable to practice in creating one-dimensional drawings on the horizontal plane. To do this, put the watman sheet on the horizontal surface of the table, consider the plot of the picture (you can apply a pencil contour for the first experience) and embody it into reality. Conducting by the tip of the nozzle with the right speedYou will create a circuit facility from plastic that can be taken in hand, hang on the wall, turn in any direction. In this way, for example, you can make:

fancy plastic snowflakes for christmas decoration,
pendants and earrings,
small toys
decorative interior details and much more.

Using this technology, a desktop mirror or a photo frame, choosing the desired color, can be arranged by opening lace.

From simple to complex - draw three-dimensional objects

When the hand is already naked on one-dimensional objects, you can try to make a stereometric figure, For example, the contour bulk prism or pyramid. To do this, an equilateral triangle is drawn on paper, from the vertices of which plastic threads are formed vertical or inclined ribs. Three inclined ribs connected at the upper point of the vertical axis form the body of the pyramid. For the prism, vertical edges are drawn, which are connected on the end and form the upper face in the form of the same equilateral triangle, as at the base.

Flat squares and triangles and the skill of their quick drawing will be required in the future, if you need to create, for example, a three-dimensional model of the house, cottage, gazebos, baths. With the help of the 3D handle, such architectural samples (layouts) are created easy and simple.

In this article we will tell you everything you need to start using graphics editor Windows Paint 3D. You will learn about the basic elements of the program management, as well as get a manual for creating a small project.

Paint 3D: Creating a new image

Before you start working with Paint 3D, make sure that you have installed this program.If you use Windows 10, Paint 3D is built into your default system.If this is not the case, you can download Paint Paint 3D from the store microsoft applications Under this link.

Run Paint 3D and click on the "Create" button to create a new image.

The Create Button (NEW) allows you to create a new image.

Menu in Paint 3D

In Paint 3D there is a major menu, the elements of which you can use to edit the image.

In the extreme right corner you will find graphic tools where you can choose various brushes and other tools and draw them.
Brushes in Paint 3D
Using the 2D button you have the ability to create two-dimensional figures, for example, a square.
2D figures in Paint 3D
On the right is the 3D button, which you will need if you want to add various 3D models (people, animals, etc.) and figures to add to your image) and the figures (sphere, cube, etc.). You can also create 3D sketches with soft and sharp edges and set various properties of the surface of the object (matte surface, shine, and the like).
3D model in paint 3D
Next to the "3D" button you can find the "Sticker" button. Stickers can be easily placed on a three-dimensional object. For example, you can create a globe from a sphere and image with a world map. This will be described in more detail below.
Nearby you will find the "Text" button that you can use to add text to your image.
The "Effects" button allows you to apply various filters or change the level of illumination of your image.
The "Drawing Area" button is used less frequently than the rest. For example, with it, you can change the size of the drawing area or choose a transparent background.
In addition to others, there is another "Remix 3D" button, where you will find various 3D models that have been downloaded by users.
All Paint 3D Menu Buttons
In the left part of the page you will find the menu button with which you can save or export your project.
Project Management Button

How to configure Paint 3D

Since three-dimensional images are mainly created in Paint 3D, you need to make friends with special management of this program.

As in the case of ordinary editor Paint.You can scale the image using the mouse wheel. And ESLand you click on the button in the right upper cornerYou can move and twist a three-dimensional image using the right mouse button. For Pressing the mouse wheel image can be moved.

Paint 3D: Creating a first project

In order for you to be clearer, how to work in Paint 3D, we suggest you create the first project with us step by step.

First add the sphere using the 3D button. When creating a sphere, hold the SHIFT key to make it smooth, not ellipsoid.
Then download the image of the earth from the Internet and drag it to Paint 3D. After that, click on the "Create 3D" button on the right.
Now click "Create a Sticker".
Move the image to the sphere by pressing the left mouse button and scaling it so that everything can be seen. After that, click on the tick. Now you have a three-dimensional model of the Earth.
Activate the transparent drawing area using the Symbol Area button.
Export your project by clicking the Project Management button, as a FBX file, which you can open using the Mixed Reality Viewer program. In Windows 10, it is pre-installed.

- A device that allows you to draw volumetric figures. But before starting to create three-dimensional masterpieces, you need to learn how to use the device. It is advisable to watch the video about working with a 3D handle and read the instructions attached to the device.

Beginning of work

After feeding the device out of the box, you need to make sure that all the elements of the 3D handle on the spot. The user in the presence of the device itself, the wire for connecting it to the power grid, plastic for drawing. You also need to figure out what each button is intended on the gadget case.

Standard set of buttons, indicators and connectors

Power indicator.
The lightned LED indicates that the device is connected to the power grid.
Device readiness indicator to drawing.
It lights up when the handle is heated to the operating temperature.
Connector for loading plastic thread.
It is located at the top of the device. Therefore, the material loaded into the device does not prevent the user to draw.
Cable connector.
Located at the top of the device. How to connect the power supply is described in detail in the instructions that are in all boxes.
Plastic feed button forward.
When you press it, the thread is fed into the nozzle and squeezed out.
Return button of plastic thread.
Unloads thread from the device. The feature of the button - it does not work immediately. It is required to hold for a few seconds. The delay is made to avoid the plastic return situation due to a random click on the button.
Temperature regulator.
The user can independently increase and reduce the melting point of the thread. As a rule, all handles are the buttons: "+" to increase and "-" to reduce.
Button or slider to switch plastic thread feed speeds.
The principle of 3D handle provides for the possibility of creating both thin and wide strokes. To get a thin line, the device must work at low speed if you need to draw a thick feature, the speed is required to increase.

After the user gets familiar with the main points on the use of 3D handles, you can start creating drawings.

But it is advantageous to conduct preparatory work:

Connect the power cable.
Wait when the device is heated, the indicator on the housing will be notified.
Insert into the plastic compartment of the chosen color.
Select the rate of plastic feed during operation.
Start drawing.

Features of working with device

Newbies The technique of work 3D handle may seem complex due to the rapid frosted in the air. In addition, it is impossible to recommend the same heating temperature of plastic, which would suit all users. The choice of optimal heating of the thread and the speed of its feed comes with practice.

After heating the device, it is impossible to touch its nozzle - there is a risk of burning. Therefore, in the instructions, how to use a 3D handle, it is indicated that it is impossible to touch it during operation. But the plastic after exiting the nozzle, though it cools quickly, but some time remains plastic.

Principle of operation of the device

Principle of work 3D handle simple. After turning on the device and refueling in it, the plastic thread is heated. When you press the plastic feed button, it turns out a thin filament under pressure. After exiting the nozzle, the working material is frozen, as it is exposed to cold air environment.

Despite the fact that the device for drawing is durable, you need to know how to properly use the 3D handle to not break it. One of the common breakdowns is a jams of plastic inside the instrument. Typically, this is due to the fact that the user missed the entire thread into the handle or did not switch the temperature. It is important not to allow the whole thread to go to the handle when you have 2-3 centimeters, you need to pull the remaining thread and insert a new one. You also need to follow the type of plastic you draw and do not forget to switch the temperature if you use different types. When not compliance, these rules may have breakdown and you will have to go to service center. If you draw a lot, after the expiration of some time your handle can have a snot, which can be cleaned using a special