Remove the rear BQ Strike cover. How to open a phone and remove the back cover with xiaomi how to open the back cover

Knowing how to remove the cover from the phone can be useful, especially when you need to change the SIM card, insert a memory card, change the battery in case of its damage or purchase of a new one, etc.

The principle of removal of the lid on mobile devicesah about the same.

Remove the cover

Whatever the reason, removing the rear cover is the process to be able to perform each user of the mobile device:

1. To start, take the phone in your hands. Now it needs to flip down "face" to see rear panel Devices. The whole process will take quite a bit of time, but it is necessary to remove the cover with two hands.
2. Turn the phone "upside down" so that the bottom mobile phone (Where the microphone is located) turned out to be at the top, and the top (where the speaker, which we apply to the ear) turned out to be at the bottom.
3. Now, by two thumbs left and right hand, press the lock on the lid. It is usually located under the camera, but if there is no chamber, then at the top of the cover, or it will be designated with relief elements. Next, together with pressing to move the lid in the direction from ourselves.

If the phone is new, then the lid will open with the application of great effort, but over time this process will be done everything is easier and easier.

In addition, the lids of some mobile devices are fixed with screws, so all the screws must be unscrewed to remove the cover.

For many owners of the BQ Strike smartphone, has become a real problem as to remove rear cover Devices. Those who have never manually removed the rear panel, do not understand how to do it properly and gently, without damaging plastic or display, and try to use various remedies, such as scissors, credit cards or knives. But it is not worth doing this - remove the lid on the phone BQ 5020 Strike is easier than its own hands. Today we will tell you how to do it right. Also see the learning video at the end of the article.

Why do you need to open a smartphone

The simplest and most important reason is the installation of a SIM card to a new one, just purchased gadget, as well as installing or replacing the SD memory card, the presence of which is provided in almost every Strike BQs phone. Map Micro-SD Allows you to expand the volume internal memory Another 128 GB, which is undoubtedly a plus.

Many smartphone owners reboot the dependent device by pulling out and re-install the gadget battery in place. You can also need the opening of the cover to replace an outdated or non-working battery to a new one. Also, if you started dIY repair Or replacing parts in the gadget, without removing the rear panel to the insides of the phone you will not get.

So let's consider a detailed algorithm of actions with which you can open the BQ phone and see what is in its inner part.

Algorithm of action

To begin with, inspect the smartphone. On top of his end, to the right micro USB Connector You will see a small recess, as if created so that the lid can be pushed. Carefully insert into this nail secession and spend it to the left, walking along the part where the plastic case fits tightly to the glass display of the smartphone. If you can't do it, in the process of promotion along the housing with a free hand, slightly squeeze it on the sides so that the plastic bent and gave the ability to perform action on the opening of the lid. Next, we carefully spend the nail around the perimeter of the smartphone several times, thereby open the device cover. The plastic panel can slightly crack from the opening, and it is not necessary to worry about - this is normal. Open the BQS 5020 Strike cover once, and in the future you will easily make this operation again and again.

How to close the lid back

It's still easier here - you will not even need your nails. Take the smartphone and put it in the plastic case. Carefully ensure that all items, such as buttons and camera, coincide with slots on the lid. Slightly press the phone to the case and thus walk through the entire perimeter. You will hear the characteristic clicks. Ready! Now you know how to open the lid of the BQ smartphone, while without damaging the housing and the screen. If something is incomprehensible - see a special learning video.

Siaomi phones are quite deservedly distributed good feedback. In the production of any original phone, Siaomi uses reliable components, which guarantees high quality Products. But any technique over time comes out of order and it requires repair. Therefore, the need to disassemble telephones. Of course, Ideally, specialists do disassembly and subsequent repairs. This guarantees the quality of work and will allow no doubt in the final result. But if you want to save on payment of their services, you can learn how to remove the back cover on the Xiaomi phrey phone or another model.

We offer you a small instruction how to open the back cover on phone Xiaomi. Redmi (including models 3 and 4), MI MAX, etc. Since almost all phones have the same design, this manual can be used for most mobile gadgets.

Sequencing

1. First of all, get a tray for SIM cards. If you leave it in the initial position inside the case, it will interfere with the lid eat.
2. Directly disassembly starts from the opening procedure for the perimeter of the gadget. The back cover opens, not so simple - you need to make a lot of effort to cope with the task. But it is necessary to do it extremely gently. Better and safer the device will open with a special shoulder blade for working with phones. And certainly, in no case in working with the back cover, you can not use sharp objects that can cause scratches. You need to start opening the latches from one corner of the phone, gradually moving to another.

1. When the latches succumb to exposure, slowly and carefully remove the back cover on Xiaomi Redmi or Mi Max. Smoothly open the case, seeing the loop, which attachs the back surface to the touchscreen. Neatty remove the loop to disconnect the front panel.
2. Now we have a "filling" of smartphones. Here we see the top panel with the chip installed, there is a chamber. Under them is a battery. Most often, the question of how to remove the rear cap Xiaomi Redmi or MI MAX appears if necessary, replace the camera or battery. It is also relevant if the touchscreen is damaged, but without additional complex equipment, you definitely do not decide this task at home.
3. Although we are open to the insides of the smartphone, we cannot remove them yet. In addition to cameras, we can get them if we open the seal, easily raised by any submitted flat object.

1. If you disassembled the phone to replace the battery or dig in the chip, you will have to work scolding. Internal elements are screwed to the cover with the bolts. We unscrew them with a screwdriver, be sure to fold in a prominent place so as not to lose, and only after that we can continue the analysis. The unscrewed bolts need to pay special attention - those that are attached from above, long screwing down from below. Therefore, put them in different places to not get confused.
2. By unscrewing the bolts, open the protective panel from the top, and the chip will appear in front of you. It is not recommended to make any changes to its configuration.
3. I close the back cover, I do the same as opening, but, of course, the actions are performed in the reverse order. The main thing is to be careful and act neatly, and then everything will turn out.

To compile a more accurate idea of \u200b\u200bhow to properly open Max and other models from Xiaomi, we suggest familiarizing yourself with the video tutorials.

Contents of delivery:

• Telephone
• Removable battery 900 mAh
• Charging block
• USB-MINIUSB cable
• Wired stereo charter with remote control
• Instruction

Once again I want to start the material from the conversation about the name of the phone. The fact is that when I meet another apparatus with a stylish, easily uttered and instantly memorable name, I want to focus on this. The new stateput from Fly with the support of two SIM cards has just that name - Fly DS105C. Just and tastefully, it is necessary to say something like this: "Fly Di ES one hundred five s." But we will leave the name and move on to the device.

Phone Fly DS105C is an inexpensive model with a color screen, simplest chamber, audio player and FM -Radio, as well as with the support of two SIM cards. Against the background of other competitors worth up to 1000 rubles, this phone is distinguished by almost all of the listed functions, because in this segment there are very few functional tubes. In the review, I will try to tell you about the main features of the DS105C and also how good or bad they are implemented in it, after all, one presence of certain possibilities in the phone is not enough, the main thing is that they work.

Design, sizes, case materials

The phone is different from other budget tubes with their screaming appearance. Here are used at once. of different types Plastic, they differ in texture and color. The form of the body is standard and reminds other ordinary phones.

On the front side in the area of \u200b\u200bthe keyboard of a dark gray plastic with a "funny" spraying, look at the pictures of the device, you might think that it is dust, but it is not her.

Screen protective coating is a transparent plastic layer. The battery cover is made of black plastic plastic, along the perimeter of the case passes the rim of glossy plastic red, closer to the upper and lower ends the rim becomes wider. Red rim also has around the central navigation button. Probably it will be right that the Fly DS105C has a youth design, in my opinion, he is in moderation calm, but it stands out, as I said, against the background of other budget tubes, so this is a plus.

Fly DS105C slightly above most budget tubes, mainly dimensions are typical for this segment - 110 x 45 x 14.6 mm, weight 73 grams. The phone is perfectly in hand, it is convenient to keep it in the conversation process and when you dial "Esmesti" on it.

The device is not profitable, with the exception of the screen surface, which is dirty constantly, let it and not too noticeable. Footprints and prints on the lid of the battery are not visible at all, but if you accidentally scratch it - it will already be noticeable.

The quality of the assembly is not bad, but there is one feature in the phone, which spoils the impression of the assembly.

Fastening the battery cover

A thorough story deserves the battery cover in this phone, or rather, the mechanism of its attachment. I even specifically allocated a separate master to this story as you noticed. The lid is attached on ordinary plastic latches, they are on the back of the cover nine pieces. Fastening the most ordinary, occurs in every second phone, if not more often.

The problem is that on Fly DS105C is a fastening of some incorrect, as a result, to remove it, you need to take the object of the scissors type and patch them the lid. Pretty barely hardly happens, and you should not do it with nails (you can break). I removed the cover from the phone times three times, during which time it was completely folded that area of \u200b\u200bthe lid for which I thought. Otherwise, she simply did not shoot.

Appearance From this spoys. If you remove the cover of two times a week (SIM cards change or put a more capacious memory card), then in a month the back of the device in the area where you need to simply appear, it will look very sad. I note that I had a commercial sample bought in the store. So, if you stop on this phone, I sincerely recommend to ask the seller in place to stick into it both SIM cards and a memory card so that you do not have to do it yourself.

And yet, the following is written in the instructions: "To open the battery cover, it is necessary to lift the top edge of the rechargeable compartment cover and remove it.. In reality, lift the cover for the top edge will not work, because there it is simply not for what to pose, you can try to pose her for the recess in the place of attachment of the strap or lace on your hand, but the benefit will not be and the lid will not be removed. Apparently, I'm not alone sometimes forget to edit in texts copied from previous reviews (smile).

Control elements, keyboard

On the upper end of the device there is a flashlight, on the left above - an eyelet for fastening the strap or lace on hand. There is nothing on the bottom, and the MINIUSB connector is on the right for charging, headset or connecting the machine to the computer.

To turn on the flashlight, the central navigation key is used, it turns on to holding down the "down" direction on it. It turns off, too, holding this button.

The lantern is neuropky, but in some situations it may be useful to highlight the intercom to enter the code, the lock from the door and so on.

In the phone, the classic hardware key block, the most of the keyboard Fly DS105C reminded me of Nokia 1280. Separate buttons, rectangular shapes, are combined by pairs of keys to the right and left navigation block Of the five clicks.

The keys have a good and clear stroke of the press, each time you press the button makes a click, I did not have erroneous clicks during working with the phone. Backlight buttons bright blue, in my opinion, not the best choice, eyes from such a backlight tired, white would be better.

The markup of the symbols is made on "satisfactory": the numbers are applied well-distinguished large font, Latin and Cyrillic - more or less distinguishable font.

The navigation button with default actions on the side pressing, the actions on the keys can be changed in the settings. In general, I really liked the keyboard in this apparatus, with the exception of too contrasting the backlight. Keys comfortable and size, they are easy and pleasant to click. In addition, in the DS105C there is an interesting find - two call prompt buttons located under each other, to the left of the navigation key. So, if you enter the number from the keyboard or opened it in the address book, you can start it in one touch both from the first SIM card and from the second.

Display

The device uses a color TFT-screen with a diagonal of 1.8 "and a resolution of 128x160 points. The physical dimensions of the display 28x35 mm, the screen displays up to 65 thousand colors. In the screen settings, you can set brightness (up to 1 to 5), select the screen backlight time and the background picture. The phone has only one background picture, but you can download others from a computer or set an image of a memory card.

The display will be blind in the sun, and it is almost impossible to read something from it. Display viewing angles good horizontally, bad vertical. The picture on the screen grainy-condom, and the background image and menu icons look as if in the device does not display 65 thousand colors screen, but a capable of displaying a maximum of 4 thousand.

A brief summary on the screen is simple - it is bad. Worse than in the rest of the state employees with smaller diagonally and smaller resolution screens, which I came across: LG A100, Philips X126 and Samsung E1200.

Battery

In the phone removable Li-ion battery Capacity 900 mAh. In size, he one-in-one coincides with the Nokia BL-5C battery, as well as any of its new versions. So, in the case of which you can use the battery from your "Nokia 1280", which is tired, in the new device from Fly.

Under the battery there are slots for two SIM cards and a microSD memory card.

From one charge, the phone works on average 3-4 days, depending on the load. I used the device only for calls, I charge immediately after buying and full charge Enough for 4 days. I think if listening to music on it, the device will work two or three days.

Work with two SIM cards

The device works with two SIM cards. Support for two Simes has been implemented traditionally for low-cost models with one radio module. When you make a call from the first SIM card, the second becomes inaccessible (does not catch the network). If at this time someone will call someone to an inaccessible SIM card, he will hear a familiar "Subscriber not available." Text messages on the second "sim card" in the process of the conversation on the first are also not passing, but are delivered only after the end of the conversation.

Assign names for SIM-cards can not, on the screen they are displayed under the names of the operators, that is, like Megafon, Beeline and so on. During the incoming and outgoing calls, the SIM card number, SIM1 or SIM2 number is shown on the screen, not a very convenient system.

Select individual melodies for each SIM card can not, the sound of text messages is also common. I did not like the Fly DS105C functionality for working with two SIM cards. From an interesting call button, only two call promise buttons, due to which it is possible without unnecessary menu transitions, literally to one touch to start a set of numbers from that SIM card that is required. Otherwise, some disadvantages - the inability to assign arbitrary names to "sims", the inability to select the main SIM card, the absence of separate sound profiles for Simok.

Quality of transmission of speech

Interlocutor when talking on phone Fly DS105C is heard very well without foreign noise, However, the voice of a person is very distorted and completely not recognized. For example, if I call a friend with this device unknown number, I'm not sure what I recognize him in a voice, so much the phone distorts him. I do not know, the lack or not, because the voice sounds clearly, loudly and without interference, but he is noticeable. The interlocutor hears me very well and very loudly, there is some background noise, but he is insignificant.

The volume of the call dynamics in the phone is very good, it literally "yells, darling", forgive me for such an expression. Even if you put on a call not the loudest mp3 melodies from the memory card, they still will sound Wow as loud. On incoming SMS you can install or standard melody Or just like the call, from the memory card. Disadvantage One - in the device you can not choose the usual call type for all modern phones when incoming call It goes simultaneously with vibration. You can select only the call, only vibration, or first vibration, then the call.

The vibrating alert is a small and frequent fraction, hardly distinguishable, even if the phone lies in his hand. Feel the vibration of the apparatus when he is in his pocket, I never could never.

Menu

The telephone menu is not very familiar and is not entirely convenient - in the form of a Vooota of such large icons, which four pieces are displayed at the screen at a time. In total, there are 8 icons in the menu, that is, two screens with icons. Colored, funny, in principle, are easily distinguishable, and it's clear what menu what means.

The disadvantage of the phone menu, and in general the system used here, in very thin and non-zero fonts. In general, this is a serious problem of such companies like Fly, Exlay, and so on, those who sell mainly inexpensive tubes based on Chinese platforms. You are easily distinguished by a reportput of any serious company, LG, Samsung, Nokia, from the producer of the manufacturer like Fly on fonts in the menu and system. On the phones of the first fonts are clear, well readable, even if small, smooth and neat, let and very simple. In the telephones of the second fonts, the curves, drokes, with jar, very thin and in some parts of the menu barely distinguishable. In the Fly DS105C apparatus, the fonts are generally neat, but very thin, with large retreats between words in some places. This font leaves not the most pleasant impressions of the device.

Address book is simple - you can store up to 150 numbers in the phone's memory, each is assigned a name and one number. Separate melodies cannot be prescribed, there are no pictures of contacts. Calls are presented by separate screens for missed incoming, outgoing or all calls.