IPhone 5 s does not work the camera. What if the camera on the iPhone does not turn on? Simple ways to restore the camera to the iPhone or iPad

The camera of your iPhone stopped working, instead of an image, starting showing a black screen? iOS warns that before use flashing iPhone. Requires cooling? About how to fix any of these problems told in this manual.

Method 1. Switch between camera modes

Let's start with ways that allow you to solve the problem with a suddenly stopped working with the iPhone camera here and now. They can help re-return the camera to the working condition quickly, without transition to serious measures, which can be useful if you need to take a picture urgently.

The first such method involves multiple switching between modes cameras iphone. Switch from the main to the front chamber several times, after which check if the main camera did not earn.

Method 2. Perform a forced iPhone reboot

The problem with the iPhone camera can be both a technical plan and software. In the second case, to cope with it quite often helps the fulfillment of a forced reboot. Hold off the buttons Home and Food On the iPhone and hold them until Apple's logo appears on the smartphone screen. After you can check the camera.

METHOD 3. Silically press your finger to the main chamber

And another simple way to solve a problem that must be tried before moving to the "heavy artillery". Help Return the camera to life can be mounted with a finger on the main chamber module.

Method 4. Re-flash iPhone via DFU mode

Important! Refracting via DFU assumes the deletion of all data from the device, so before starting the operation, be sure to create fresh backup iPhone.

IN large quantities similar cases of salvation was the procedure flashing iPhone. through dFU mode. It is performed as follows:

Step 1. Connect the iPhone to a computer with iTunes installed.

Step 2. Translate the iPhone in dFU mode . To do this, simultaneously hold the buttons Home and Food And hold them within 10 seconds, after release the power button and continue to hold the button. Home As long as iTunes does not determine the smartphone in recovery mode (about 10 seconds).

Step 3. Click " Restore iPhone».

Step 4. In the window that opens, click " Further"And" Accept»And Wait for the end of downloading software and subsequent iPhone recovery.

Also note that in some problem cases, recovery through the DFU to the firmware loaded manually helps. Actual firmware for your device you can download on this site. . In order to choose it when recovering, the " Restore iPhoneYou need to click with the SHIFT clamped key.

Method 5. Refluous iPhone Camera Module

However, it is even more likely to be to blame for a slightly moved iPhone camera module. In this case, it helps to disconnect and re-enable the camera loop. About how to disassemble various models iPhone. You can find out in the following instructions.

The front camera is widely used not only for selfie, but also for video calls, face recognition, and even as a mirror. IN apple products Her breakdown happens infrequently, but it can greatly prevent the daily use of the device.

Causes of Faults of the Front Camera in the iPhone

Obviously, repairs are necessary when front-camera does not turn on. But also the need for repair indicate the following signs:

• cracks;
• internal divorces and stains;
• appearance of lights;
• fully black screen when shooting;
• enlightening application when photographing;
• focus problems.

The problems described above appear due to mechanical damage, fluid falling or software failure when conflict conflict. Using an iPhone in an inappropriate temperature mode can also affect its performance.

The ability to photograph influence:

• plume;
• plume connector;
• internal sensors;
• elements of the central processor chain;
• motherboard contacts.

Prevention of problems with the front camera in iPhone

When it comes to a serious breakage, such actions can help you:

• free memory for new pictures, removing extra photos;
• complete the work of third-party applications;
• to clean the lens, use a special napkin;
• try to make a photo without a cover if it is;
• try changing the focus before creating a picture;
• make sure the shooting application is not included in the lock list.

Repair of the Front Camera iPhone

It is impossible to fulfill the camera to repair the camera, since there is a high probability to aggravate the breakdown, as well as damage other, more expensive items.

For any manipulations will need professional diagnosiswhich will include check not only software, but also hardware. Depending on the problem found, the master opres apple device Or replace the faulty part, after which the chain of the elements of the front camera will completely restore.

Problems with anterior chamber is an alarming mark that requires contacting the professionals of your business. Come to our service center Total Apple, and we will help you!

Hey! Literally recently I had to update the iPhone 5s on the iOS 10 one acquaintance and everything would be fine, but ... then I would not write this article :) In general, the next day he came to me and stated literally the following: "In Apple all the villains . Artificially make overalls of devices - forced to buy a new one. Look, after the update, my rear camera stopped working (there is now always a black screen), and the flashlight does not turn on, constantly writes about some overheating, although the device is completely cold. "

I, of course, can believe that Apple somehow forced to buy your new gadgets (for example, adding new chips). But not the same barbaric - simple update Breaking cameras. Therefore, it was decided to try to fix this ailment and ... because it turned out! How? Now I will tell you, went!

From the very beginning it is worth noting that, concerning this problem, the rear chamber and flashlight are dependent together. The camera will show a black screen, and when the flash is turned on, it will be written: "Flash is turned off. Before using the iPhone flash requires cooling. " This is, so to speak, the main symptom.

So, first-in-idle I climbed to look for and see what people write about this. It turns out that Apple's forum already has a whole branch dedicated to this fellow. And such "lucky ones" (with a non-launched camera after the update) is scored for a whole town. True, mainly there this is speech About iPhone 5, but 5S, as well as the remaining IOS gadgets, are also mentioned. These are the advice and actions managed to be high - after their execution, some camera earned again:

1. Enable or disable power saving mode ().
2. Switch cameras (with frontal to rear) several times. While the black screen does not disappear and it will not start turning on.
3. Press a little in the area of \u200b\u200bthe camera (very neat!).
4. Close all applications that can use the chamber and try again.

1. We make a hard reboot of the gadget. How?
2. The last relevant firmware.

If it does not save, you will have to climb inside the gadget. There will be a small advice here - in the case when the device is on warranty, to do this yourself as it should not. . And remember that for PCT iPhone. The warranty period in Russia is 2 years (and not one as many people think).

If you are not alien to assembly and disassembly skills, then check and turn off:

• Camera cable.
• Battery.

Perhaps they just moved away after falling or otherwise. If the phone is restored unofficially, reassessed or has been subjected to some "handicraft" repair, it is often possible to note that there are no special films on the plumes, which allows you to securely fix the loop in the connector. And at the slightest fall, it simply falls out.

Even if everything is in place and it seems to you that they are installed tightly and to the end, to solve the non-operating flash and black screen when you start the camera, you must pull out and paste them. Yes, simple reconnection in most cases is enough.

It worked and in our case - in the end it turned out that the phone from a friend fell several times and the chamber cable was trivially departed.

It should be noted here that the buddy bought the iPhone 5S on the market and who, like, and from which he was collected - we naturally do not know. In any case, if on the previous version of iOS. It did not interfere with the camera normally start, then after the update, something went wrong and instead of the shooting object, we saw a solid black screen.

I hope that before disassembling the device, you will not have a business and make you earn a chamber with a flashlight will be obtained by other, simpler methods. Although in the last version there is nothing complicated, you just need to act gently and do not break anything else :)

P.S. There is another secret way to solve the problem - I bet "Like" and all "OK"!

Most users use their iPhone, first of all, as a means for creating high-quality photos and videos. Unfortunately, sometimes the camera can work not entirely correctly, and affect it can both software and hardware problems.

As a rule, in most cases the camera of the apple smartphone ceases to function due to problems in operation software. Less often - because of the breakdown of internal details. That is why, before contacting the service center, you should try to eliminate the malfunction yourself.

Cause 1: Camera application failure

First of all, if the phone refuses to shoot, showing, for example, a black screen, you should think about the fact that the camera application hung.

To restart this program, Return to the desktop using the Home button. Double-click the same button to display the list. running applications. Make up the program Camera, and then try to run it again.

Cause 2: Failure in the work of the smartphone

If the first method did not bring the result, you should try to restart the iPhone (and consistently execute both the usual reboot and forced).

Reason 3: incorrect job application camera

The application may be due to failures in the work not to switch to the front or main chamber. In this case, you must try repeatedly press the shooting mode button. After that, check whether the camera has earned.

Cause 4: Fasteit Failure

Go to "heavy artillery". We suggest you complete the complete restoration of the device with reinstalling the firmware.

Reason 5: incorrect operation of power saving mode

Special function iPhoneImplemented in iOS 9 allows you to significantly save battery charge by turning off the operation of some processes and the functions of the smartphone. And even if in this moment This feature is disabled, it should be tricked to restart.

Cause 6: Cases

Some metal or magnetic covers may interfere with the normal operation of the camera. Check this simply - it is enough to remove this accessory from the device.

Cause 7: Camera Module Fault

Actually, the final reason for the inoperability, which already concerns the hardware component is the fault of the chamber module. As a rule, with such a fault type screen iPhone Shows only a black screen.

Try a little press on the chamber's eye - if the module lost contact with the loop, this step Can return for a while the image. But in any case, even if it helped, contact the service center, where the specialist will diagnose the camera module and will quickly eliminate the problem.

IPhone 5 camera does not work - remove the problem yourself

Breaking rear camera On iPhone 5 may be a consequence of mechanical damage or the result of third-party software. Consider more detailed all the common causes of breakage, as well as methods of its correction.

Causes of breakdown

If after starting standard application "Camera" lens does not show anything (iPhone 5 camera black screen), check if the case or other external objects are covered with a camera. The most common causes of malfunction are:

• updating firmware. Often, after updating the version of the installed OS, users can face incompatibility of the software and hardware components of the camera. Because of this, the camera does not work in the iPhone 5;
• too little random access memory devices, which is why the program cannot progress;
• the main directory of the camera is filled;
• hit in the housing of moisture;
• strong drop or punch of the phone that can trigger the camera module breakdown.

Method 1. Emergency reboot

This method will help to eliminate the problem of the non-working chamber, if at the moment there is not enough RAM on the phone or after the update standard program "Camera" lens stopped working.

Hold down the power key and hold the TE for 10 seconds.

Wait for the device shutdown menu. Slide the slider to the right to turn off the iPhone 5. Then start the phone again. Check the camera performance.

Method 2. Delete the Camera Catalog

Often the camera on iPhone 5 does not work when the root folder with all the photos is filled. Connect the phone to the computer and delete the directory that saves all the videos and photos. It is located at PRIVATE / VAR / Mobile / Media / DCIM / Apple.

Method 3. Restore device settings

To eliminate all existing software problems, including the problem of camera functioning, it is better to recover the phone via iTunes. Connect the phone to the computer on which it is installed iTunes application. The program will automatically detect your phone. After a few seconds a window opens containing information about iPhone. Click on the Restore button and wait for the formatting process.

Important! After recovery, absolutely all data will be removed from your smartphone. All settings will be returned to factory.

Method 4. Replacing the camera module

Most effective method - This is the replacement of the camera module. To start disconnect the phone. Using a screwdriver, remove two screws from the bottom of the housing.

With the help of a sucker, disconnect rear cover And the bottom edge of the blade. Position the lid by 90 degrees from the phone without disconnecting it to the end.

Using a screwdriver, remove the protective panel from the motherboard, as shown in the figure.

The spatula gently disconnect the front chamber loops, the ADC and the LCD display of the phone.

Unscrew the screws shown in the photo:

Remove the battery connector holder.

The location of the connector must be pushed. Then you will find the battery itself and disconnect it. Raise the cable of the antenna module.

Remove the protective panel that holds the top of the motherboard. Using a screwdriver, release these loops:

Remove the screws at the top of the case:

Unscrew the screw and remove the central holder of the main board:

Remove the sim card from the phone. Fully disconnect motherboard And get it out. From the reverse side of the motherboard, disconnect the Wi-Fi loop. Discover the camera and replace it with a new part. Repeat all the actions in the reverse order to collect the phone.