Easy and homemade way to increase the traction of the vacuum cleaner. How to make a vacuum cleaner more powerful? How to increase the absorption capacity of the vacuum cleaner

Using household appliances, often face the situations of the fall of their power, which reduces the performance of devices, the comfort of their use. This is especially true of vacuum cleaners when it becomes impossible to finish high quality cleaning. What affects the drop in their power and how to restore it - about it further.

The drop in the power of the vacuum cleaner can occur differently. If this is observed in time gradually, the reasons may be in a wrong or loose assembly of parts, clogging filters.

Devices with incorrect assembly show less effectiveness than those that are collected in full compliance with technology. With a loose location of parts, additional air drawing occurs outside the work units, which leads to a decrease in the performance of the aggregates, the drop in their power. You can increase the last one, only disassembling the vacuum cleaner and correctly collected again.

The first thing to pay attention to the gradual drop in power is the condition of the filters of the vacuum cleaner. It is in them most often the reason for reducing the productivity of the unit.

Today there are many different vacuum cleaners. They may have one filter, but there are models and four filters. It is necessary to check everything and as a state to decide to replace them or can be limited to cleaning.

If the filter is in the vacuum cleaner in the form of a bag bag, then it is worth checking not only the level of filling it with garbage and dust, but also the integrity of the tissue. If the unit with an aqua filter, then the water is poured out of it, after which they make washing.

If the drop in power in the vacuum cleaner occurs sharply, the most common cause of the situation is the subject stuck in the hose. The problem is solved easily: the unit is turned off; Checked on the lumen tube; If some zoom is detected, then it is removed, pushing the long item.

A sharp weight loss of a vacuum cleaner can occur during a random turn of the lever of its regulation, which is on the body and come on the hose handle. Restoration of the efficiency of the unit occurs after bringing it to the right position.

If all actions that are described above have not led to the restoration of the former power, then the reason is faster in problems with the electric motor or electronics of the vacuum cleaner. You can fix this only by contacting the help of a specialized workshop.

Instruction

How to increase the power of the vacuum cleaner for better suction and dust from the palace? Make one useful thing - look at the filtering system of your vacuum cleaner. It can be clogged, and therefore loses the power of suction. The first in the filtration system is a bag that is the main obstacle for dust falling into the vacuum cleaner with the flow. Open the dust cover (it is usually on the latch) pull out the bag in which the garbage is collected, pour its contents into the trash can and freely select the dust collector. After that, check it on integrity; If he is without holes, then insert it back, while the bag does not press to the opening, which leads to the motor of the vacuum cleaner. Dispose of a disposable bag and paste a new one.

The second filter, which serves to protect the motor from random dust, is located in front of the engine. Check it regularly, but not as often as the dust collector. To check the second cleaner, remove the bag and pull out the filter, which is located in front of the motor opening, pulling up. Cleaning this equipment will make it possible to slightly increase the power of the vacuum cleaner.

If you do not have a dear vacuum cleaner, then it should stand a flat filter from pressed microfiber material or foam rubber; If it is spoiled, find a similar material and cut out with the help of scissors the same item. In more expensive aggregates can be non-filters that are soaked. If you have this, then take the filter and wash it under a warm jet of water, then dry it and install it back. Do not forget to check the filter for holes. Even more expensive filters are coal. They are the most practical and reliable. They should also be rinsed, dry and install in place in the vacuum cleaner.

The last filter in the cleaning system is located after the engine at the outlet of the vacuum cleaner - it catches the coal dust from the electric motor brushes. This filter of final cleaning is less than all affect the power, but still contributes to this in its contribution with complete garbage. At the outlet of the air jet from the vacuum cleaner should be the lid - remove it and below it and pull out the filter, they are usually made from the sheet filtering material of the marked FST 0001. If it is scored and painted in black from the dust of the motor brushes, it is better to replace it. Look at the parts of the parts of the same material in the stores or select a similar one, to cut a new one on the size of the old filter, then install it under the lid. It should be noted - it is these filters that are used not only in simple vacuum cleaners, but also in miserable vacuum cleaners and vacuum cleaners with aqua filter.

In the process of active use, household appliances may occur when their performance is not enough for comfortable use. This is especially noticeable in vacuum cleaners when it becomes impossible to finish cleaning properly. In this case, you need to know how to increase the power of the vacuum cleaner. Consider several ways to make it with your own hands.

How to increase power without referring to professionals

If the effectiveness of the vacuum cleaner gradually decreases over time, two reasons for its behavior can be eliminated. These include:

Incorrect or loose assembly of device parts.
Clogged filters.

If the device is assembled incorrectly, and it does not have protection from improper assembly, then the device can simply work with less performance.

If the parts of the unit are not installed, then the additionally retractable air will significantly worsen the operation of the device. Increased power in these cases may after disassembly and subsequent correct high-quality assembly of the unit.

Be sure to check the filters of the vacuum cleaner, it is most often the reason for the reduction of its suction.

In various models, the device can accommodate up to 4 filters, and you need to check the condition of each of them. Depending on the type of filter, it may be necessary to replace it or simply dry or wet cleaning.

In models with a bag for collecting dust, you need to check the integrity of this bag, be sure to clean it, and then install it again. In appliances with aqua filter, it is necessary to pour water and rinse the container (more on the maintenance of instruments - the eternal vacuum cleaner, or the rules for home appliances).

What to do with a sharp change in power

If during the harvesting process the efficiency of the unit fell sharply, then, most likely, the cause will be stuck in the tube. It is very easy to solve this problem. You need to turn off the device and on the clearance to check the status of the tube. When a piece of paper, a small toy or other item is simply simply deleted, and the device will again work properly.

However, such a situation can occur when during cleaning it was by chance that the power switching lever on the device housing is. If this is true, then it is enough just to return the lever into your previous position.

In addition, the tube also has a lever controlling the device's absorption. Perhaps this lever was accidentally pressed, and the opening was opened, where the excess air began to be absorbed, which also reduced the efficiency of the device.

By fixing all these moments, you can continue cleaning in scheduled mode. If all these measures did not receive a proper response of the device, then you will have to seek help from qualified specialists.

In the process of active use, household appliances may occur when their performance is not enough for comfortable use. This is especially noticeable in vacuum cleaners when it becomes impossible to finish cleaning properly. In this case, you need to know how to enlarge. Consider several ways to make it with your own hands.

If the effectiveness of the vacuum cleaner gradually decreases over time, it is possible to eliminate yourself two reasons This is his behavior. These include:

Incorrect or loose assembly of device parts.
Clogged filters.

If the device is assembled incorrectly, and it does not have protection from improper assembly, then the device can simply work with less performance.

Be sure to check the filters of the vacuum cleaner, it is most often the reason for the reduction of its suction.

In various models, the device can be counted up to 4 filtersAnd check the condition of each of them. Depending on the type of filter, it may be necessary to replace it or simply dry or wet.

What to do with a sharp change in power

However, such a situation can occur when during cleaning it was by chance that the power switching lever on the device housing is. If this is true, then it is enough just to return the lever into your previous position.

Not everyone can afford to purchase new household appliances. Thanks to this article, everyone can learn how to increase the power of the vacuum cleaner at home with their own hands. To date, there are many different methods. Therefore, if you see that your vacuum cleaner has become worse to work, you should not panic and watch prices for new equipment. With the help of some tips, you can eliminate this incident.

How without redevelopment to increase the power of the vacuum cleaner with your own hands

If the work of the vacuum cleaner has deteriorated in some time, then this factor can be eliminated. How to increase suction? There are only two main reasons why this nuance may form:

The assembly of parts was not carried out according to the instructions, so some details are fixed incorrectly or not to the end.
Dirty, not cleaned filters.

If the vacuum cleaner was assembled not according to the instructions, and it does not contain a function that should notice about incorrectly installed items, it is natural to work not at full capacity. As a result, garbage, wool, carpeting hair and even dust from ordinary laminate are absorbed.

Before using the first thing you need to check the filters. Most often, they are the cause of bad suction. Depending on the company and model of the vacuum cleaner, the number of filters will depend. The maximum number reaches 4 pieces, it is necessary to check each separately. If the filter is broken or cleaned, it is required to replace it. If still the chances are for cleaning, it is better to use a wet way. Models that are used to collect garbage bag requires additional inspection. In this situation, it is necessary to check if the bag is not damaged, as far as it is filled. It is recommended if the container is 80% filled, first it is cleaned, and then they are installed again.

The devices that have a container for assembling mud in the form of aqua filter, cleaning occurs as follows:

First, you need to pour dirty water.
Wash the filter capacity.
Pour clean water and install filter in place.

If the vacuum cleaner does not have significant breakdowns, then the 2 methods above must help you. As practice shows, 85% of people who collided with the problem of poor suction, solved by these ways.

Advantages and disadvantages of filters

Here we will look at the advantages and disadvantages of each type of filters for the vacuum cleaner. There are three main types of vacuum cleaners:

Vacuum cleaners without bags are cyclone or as they are also called container.

Washing, which work with the help of water, contains aquilfilter.

And the most common view of the device is a classic bag containing a classic bag. Suitable for both dry and wet cleaning. Instead of a bag can be a dust collector.

These types have a huge range of different models, among them are located, which are satisfied buyers, but and from which one disappointment remains.

Cyclone

The vacuum cleaners do not contain dust collectors and bags. Thanks to modern technologies, it is no longer necessary to use the invention of Dyson. European manufacturers did not want to produce such a type of vacuum cleaner for a very long time, knowing that they have many drawbacks, but the desires of consumers turned out to be higher. Appeared on shopping grounds, shop shelves are quite recently, approximately 5 years ago. At that time they had a high cost, and not everyone could acquire it.

Today, a lot of users of cyclone filters are disappointed with the acquisition. It remains to understand why, and for this you need to consider the pros and cons:

Has very good advertising, thanks to which the vacuum cleaner became very popular
No need to spend extra money bags. In European countries, a couple of dollars in European countries.
Make good air purification from dust, which eliminates well with a rotating vortex, that is, cyclone.
If the container is almost full, it does not affect the absorption of the vacuum cleaner, it is not necessary to increase it.

Benefits are available, but minor. Now consider the shortcomings:

With Aqua Filter

As soon as these models were released, there were great popularity for cleaning in a hospital, special production or laboratory. As before, so and now have an expensive cost, as it carries out dry and wet cleaning at the same time. Now consider why they became famous.