How to set up a microphone in Skype - a few simple steps. We solve the problem with the microphone in Skype program to enhance the microphone in Skype

It is convenient because the program is immediately ready for work and easy to configure. It is enough to simply connect the microphone to the PC, add close people to contacts and start communication. But sometimes it turns out that the equipment requires additional commissioning. Consider how to configure the microphone in Skype.

First step - proper connection Devices, you can skip it to the owners of laptops, as they are all built-in. Standard microphones MINI-JACK plug. It connects to the audio sector with the inscription MIC. It is advisable to connect directly to the sound card. It happens a separate embedded in the motherboard and external.

Attention: it is easy to confuse the headphone and microphone connector, you should focus on the inscription.

There are devices connected in USB ports. It is pre-make sure that the connector works by inserting another device into it. You can be completed on this connection.

Now you can go directly to the settings. Microphone operation parameters are installed both in Skype and in operating system. To begin with, open the "control panel" (the easiest way to via the Win + X menu), we are looking for a "sound", "sound equipment" or similar to the name item. In the pop-up window, go to the "Record" category. It displays all audio output devices. Connected next to the icon there is a check mark or a black arrow. The title should contain a device model or some kind of indication. Double-click on the appropriate device.

First you need to make sure that the device is applied, it will be the corresponding item below, it must be activated. Click on "Properties". The microphone driver status window pops up. If everything is fine, close it and go to the next item. In case of error, you must delete old driver And install a new one. You can find it on a disk included in the package or online on the site official manufacturer. At the end of the installation, you must restart the PC.

Return to the properties of the device. Now we need the "Advanced" tab. In the format it is desirable to set the quality of 44100 Hz, if you have normal microphone and built-in sound card. The maximum value makes sense to exhibit in the presence of an advanced model. Now go to the "Levels" tab. The amplification slider is better to keep on a small value, and the volume on average. If necessary, they can be increased or decreased.

It remains only to configure the microphone in Skype. In the parameter menu, you need to select the correct sound output device, as well as set the optimal volume. There you can also set the keys to activate and deactivate the microphone.

When configuring Skype's program, many of the users do not pay due attention to setting the sound equipment. Therefore, often their interlocutors cannot disassemble the voice of who they speak, and in many cases they do not hear it at all. Therefore, the microphone setting will be needed anyway. About how to set up a microphone in Skype correctly, you can learn from this step by step leadership. Especially since the new version has recently released and the setting is a little different in it.

Despite the fact that the microphone is you going to use to work in the Skype program, its setting will be exactly the same as for any other model. It includes three uncomplicated stages:

Connect the microphone to the computer.
Its configuration and verification in Windows.
Its configuration and check in Skype.

The description of each of these steps will be shown later.

Connect to computer

How to connect the microphone to the PC? Hardware switching can be carried out via USB or 3.5 mm connector. To connect via the connector, you will need a socket that comes out of the sound card. As a rule, these sockets are located on the rear and front panel of the computer. In any case, such nests on each side happens three and they painted in different colors:

green for sound to which columns or headphones are connected;
blue for output signal from any audio device (for example, synthesizer);
pink for microphone.

In the last pink socket and it will be necessary to connect the microphone connector. In the case of connecting through the USB connector, it is still easier. You can choose any free USB socket and connect the microphone to it.

Setup through the operating system

Immediately after connecting the microphone to the computer, a message appears on the monitor. If everything is fine, the PC itself will install the necessary drivers. However, it may be that the message will not appear. It is possible that there are no sound Drivers. They can be installed from the disk for motherboard. Take this disc and spend the necessary installation, after which the computer will need to restart.

What to do when there is no disc? It is solved quite simple. We go to the manufacturer's website and download all the drivers for your motherboard from there. And now let's look at how to set up a microphone in new version Skype. We will do it with the help of the computer's operating system. These parameters are identical to all versions of Windows. We carry out the following:

We go to the "Start", and then in the "Control Panel". We find the "Sound" tab in this folder and double-click on it. A new window appears.
Next, go to the "Record" folder, in which there is a whole list of microphones that are connected in this time to a computer. Choose the one that is already there and double click on it. The window opens with properties.
Now we make the transition to the "Listen" tab. Install there the checkbox opposite "Listen to this device"And immediately click on" apply ". In our headphones, the sounds emanating from the microphone are heard. These manipulations allow you to adjust the microphone on the headphones.
We find the "Advanced" tab, look where sound frequencies are specified in the "Format by default" list, and choose the most of them maximum. After that, click on "apply".
We make the transition to the "Levels" tab. Here all installations are performed at your discretion. We recommend the positions of the slider "microphone strengthen" and "microphone" with those in which the sound quality will be the best. Incorrect positions of these regulators lead to the fact that in Skype you will not be heard or heard too loudly and with distortions.
For proper Installation Electronic sliders, set test values \u200b\u200band click on "apply". Then we start talking to the microphone, and listen to the sounds in the headphones. If the sound quality is good, then go on, if not, then continue the setting.
After we finish with the sliders, we go back to the "Listen" tab, remove the checkbox from it and click on OK.

Thus, we have completed the setting in Windows WINTOVS. It remains only to check how it all works, with what quality and show how to configure the microphone in Skype.

Test of the configured sound parameters in Windows "WINDOVS"

After the configuration of the required parameters is completed, it is recommended to always hold a final check. What should I do for this? We return back to the "Sound" window, it goes into the "Record" tab and choose our microphone. Directly opposite it is located a column of green. When the sound from the microphone goes to a PC, then in the column it is reflected in the form of green cubes. If you see them, then everything is in order and you can move on.

How to set up a microphone in skype

Subsequent setting in Skype will require some adjustment of previously made installations in this program. You will first need to install Skype. This is done as follows:

download setup files on computer;
we follow the recommendations of the installation program;
after installing Skype, register;
after starting the program, we go to the menu and find "Tools";
we go to the "Settings" and select "Sound Setup";
we note those devices in the "Dynamics" and "Microphone" bookmarks that already have a connection;
i exhibit the sound level of your hearing;
if you hear the background in the headphones, then remove the checkbox opposite the "Automatic Microphone Setup" function;
now click on "OK" and keep everything.

Installation settings for a microphone in Skype, Windows 10, Windows 7 and Windows 8 are the same.

Check microphone in Skype

And now we will show how you can test the microphone connected to Skype. To do this, you will need to open the "Settings" window again and find the "Sound Setup" tab. Then we look at the electronic slider next to the "Microphone" setting. If you publish sound, it will have to move to the right side. In the event that everything happens, just close the window.

Now the time has come for a test call. Select one of them in the contact list, which is called "Echo" and make a challenge. Listen to the answering card information and immediately after the control signal we produce voice record. At the end, it will be played in automatic mode. If you can hear your voice in headphones, you can say that the microphone setting has passed successfully and you can begin communication on the phone. In the case when nothing can be heard, you need to check the microphone settings.

Problems when setting up

The main problems when setting up the microphone can be:

poor-quality sound or its absence;
microphone gain is insufficient;
excessive level of amplification.

To solve them, it is necessary to return to the description of the section - how to configure the microphone in Skype.

This article covered all the stages of the microphone setting to work with it in the Skype program. If you try to accurately follow the recommendations of this instruction, then the fulfillment of all necessary steps, even inexperienced users will not take much time and labor.

To communicate in Skype in any mode, besides textual, the microphone is required. Without a microphone, it is not necessary for vocal calls or during video calls, nor during the conference between several users. Let's figure it out how to turn on the microphone in Skype, if it is turned off.

In order to enable the microphone in the Skype program, it must first be connected to a computer, if, of course, you do not use a laptop with a built-in microphone. When connected, it is very important not to confuse the computer connectors. Relatively often inexperienced users, instead of microphone connectors, plug the device to connect the headphones or speakers. Naturally, with such a connection, the microphone does not work. The plug must enter the connector as close as possible.

If the microphone itself has a switch, then you must bring it into the working position.

Usually, modern devices and operating systems do not require additional installation Drivers for interaction with each other. But, if with the microphone supplied installation disk With "relatives" drivers, then you need to install it. This will expand the microphone capabilities, as well as reduce the likelihood of failure in operation.

Turning on the microphone in the operating system

Any default microphone is enabled in the operating system. But, there are cases when it turns off after system failures, or someone turned off it manually. In this case, the desired microphone should be included.

To turn on the microphone, call the Start menu, and go to the control panel.

In the control panel, go to the "Equipment and Sound" section.

In the window that opens, go to the "Record" tab.

There are all microphones connected to the computer, or those that previously connected to it. We are looking for a disabled microphone, click on it with the right mouse button, and select the "Enable" item in the context menu.

All, now the microphone is ready to work with all the programs installed in the operating system.

Turning on the microphone in the Skype program

Now we'll figure it out how to turn on the microphone directly in the Skype program if it is turned off.

Open the "Tools" menu section, and go to the "Settings ..." item.

We will work with the microphone settings block, which is located at the top of the window.

First of all, we click on the microphone selection form, and choose the microphone that we want to enable if several microphones are connected to the computer.

Next, we look at the "Volume" parameter. If the slider takes the leftmost position, the microphone is actually turned off, since its volume is zero. If you have a check mark "Allow automatic microphone setting", then remove it, and move the slider to the right, as far as we need.

As a result, it should be noted that by default, no additional actions to turn on the microphone in Skype, after it is connected to the computer, you do not need to do. He must immediately be ready to work. Additional inclusion is required only if some failure occurred, or the microphone turned off forcibly.

(Skype) is not a novelty, and has already won its numerous adherents, the number of which is tirelessly growing for more than ten years.

Thanks to Skype, access to free communication in real time with the ability to not only hear, but also to see the interlocutor. All you need in order to use this tool of communication is access to the Internet, availability installed programas well as headsets and webcams.

Initial settings

During installation, the program proposes to enter initial settings, Create account Or enter the already existing account, install the avatar, as well as check the sound quality and video. You can immediately use the function additional settings. Pressing the "Continue" button, you go to the main application menu.

Before you configure Skype, you can enter your contact list of the interlocutors you need. Under avatar there is a search box with a friend to the whole icon in the form of a magnifying glass. Using the search and exchange of contact data on the left side of the application, the contact list is formed.

In contacts by default there is an ECHO / SOUND TEST SERVICE. With this service, you can check the availability of sound and video in the program.

If you are the owner of the modern laptop model, a netbook or tablet, where they installed Skype, there are already built-in microphone, speaker and camera, there should be no problems with the performance of communication, but to deal with how to set up Skype, will not be much difficult. But if you need to additionally connect the headset and the camera to the computer, then at first there may be some difficulties in a non-reading user.

Microphone and Sound Setup

Operation of the equipment and the correct connection of the microphone to the computer will cause work without additional adjustment. Warming a PC connection settings necessary drivers, the question, how to configure the microphone in Skype, will not appear, since the application will set the default all the options for work.

The procedure produced in the absence of sound in Skype:

To begin with, we are convinced that the microphone and speakers are connected to the corresponding computer connectors.
Now check the connection to the system using the "Control Panel", which is called using the Start menu. Go to the "Equipment and Sound" tab, choose "sound". In the settings window that appears in the "Record" tab, the microphone icon must be displayed. If multiple audio cards are used on the computer, you must select the device to which the device is connected. In the case when the microphone is built into the webcam, choose its name. Press the Right-click "Connect".
On the Playback tab, the connected speaker icon is displayed. If the device is inactive, also on the icon right-click, select "Connect". In the tab of the properties of the speakers and the microphone, the "Levels" of both devices should achieve a 100% mark, if not - just drag the slider to the right to the end. However, the increase in the microphone should not exceed the value of +10.0 dB, otherwise it will not please his distorted sound.
If a necessary parameters Systems are configured correctly, and the sound directly in the application does not all appear, consider how to configure the microphone in Skype. To do this, go to the program to the Tools tab, the "Settings" section and select the "Sound Setup" item.
It is advisable to put ticks in the appropriate places for automatic setting speakers and microphone, after which save set parameters. When conversing a green microphone volume trip should be slightly fluctuated, but if there will be sharp sound oscillations, it is better to disable this option.
We run ECHO / SOUND TEST SERVICE for sound testing. Provided that all settings were entered correctly, after the test recording, you will hear your voice from the speaker.
After you configure the sound in Skype, it turned out and there is a desire to set melodies to your discretion to call or other Skype events, you can go to the "Sounds" tab, where you can choose the desired melody from the list.

Camera setting

Video program feature is an important aspect If you need a visual contact in the process of communication. Possessors of laptops with embedded devices worry about how to set up the camera does not have to have, no additional parameters It is not necessary to install video to display. But if you have an external webcam on your computer, it must be configured for correct operation.

The first thing to check is connected if the device is connected to the connector intended for it on the computer. Drivers can be installed automatically or manually from a disk that goes in the configuration.
If something is wrong with the drivers, they are missing or there is a need to update, then in the Device Manager, next to the connected device icon will stand yellow exclamation point. Then you need to open the "Camera Properties" and install or update the drivers.
The camera does not work continuously, but turns on only when programs that use it, such as Skype, so run the application.
We open the "Settings" section in the Tools tab and select the "Video Settings" tab. If an image appears, it is not necessary to set anything else, you can move to communication. And if the video is not displayed, but all the steps described above are made, you should find out if the camera is not used by another application.
The setup menu also assumes the presence of additional parameters, such as adjusting the brightness, contrast, rotation of the image, - they can be found on the "Advanced Settings" tab.

After you managed to configure Skype, you can start making a video call to other users.

If there is a need for, you can always make adjustments for sound or video settings in the appropriate section on the Tools tab.

During sets Skype. Many users skip the equipment settings and are trying to quickly finish it. This is the main reason why your interlocutor listens to silence during a call: the necessary parameters are not configured. Therefore, consider how to configure the microphone in Skype if you do not hear.

Check microphone

To start, check whether the recording device is connected to the computer. In laptops, the microphone is built into the case, but on the stationary PC it connects to an external connector (by a separate device or with a webcam).

Now check if your microphone is turned off in the Skype itself. Call the Sound Test Service and look at the appropriate button. If the icon crosses the line - click on it.

Next, check the device efficiency. To do this, connect the microphone to another device and try using it for its intended purpose. If everything is in order, it means that the problem lies in settings Skype. or Windows.

Setting Skype.

In most cases, the microphone does not work precisely because of the wrong settings in Skype. To change them, you need to perform the following:

Setup in Windows.

Now we'll figure it out sound settings In Windows. Perhaps the problem lies in them. For this:

If the sound appeared, but you can hear badly - follow these recommendations:

On this, all the recommendations came to an end. Now it is known how to configure the microphone in Skype if the interlocutor does not hear. If none of the methods helped you - update the driver sound card And repeat all the described instructions in the chronological sequence. Good luck!