IPhone in recovery mode. How to go to the RECOVERY menu? Options How to get recovery. How to bring a phone from recovery mod

There are cases when when updating the Wi-Fi firmware or system, your iPhone, iPod or iPad refuses to load in normal mode. Often, these are facing users who decided to make a jailbreak on their device or they experiment with the installation of various tweaks from the Cydia store.

If such a situation occurs, do not be discouraged, the problem can be solved by almost in any situation if it originated at the program level - just restoring the firmware. On devices S. operating system iOS update And the recovery of the firmware can be implemented simply by moving it into Recovery or DFU mode mode.

In this article we will tell you what is Recovery Mode.How to enter and exit this mode. About DFU mode You can read in our article How to download iPhone and iPad in dFU mode

Recovery Mode is a device firmware mode in which basic system files are not affected, only their integrity and recovery is checked, the settings and IOS parameters are reset, and changes are made, if any.

If on the device screen you see the image of a USB cable and icon iTunes programs, Your gadget is located in Recovery Mode. In this mode, the device goes as soon as you start the process of updating or restoring iOS C using iTunes. On the computer, or they themselves transferred iPhone and iPad to Recovery mode.

How to enter Recovery Mode mode

Translate iPhone, iPod or iPad to Recovery Mode mode can be absolutely from any state of the device.

Step 1 Turn off the iOS device. Hold and hold the POWER button until you appear on the slider screen with the inscription, turn off, then drag it from left to right to turn off the device

Step 2 Tap button Home. And not releasing it. Connect the iPhone, iPod or iPad to a computer using uSB cable. On the iOS-device screen, an image appears with iTunes icon and a USB cable, meaning that the device is loaded in Recovery Mode mode

Step 3 On your computer, run iTunes to make sure the device is in recovery mode

Now you can easily make a reset and restoration, as well as the gadget firmware.

How to exit Recovery Mode

Exit the recovery mode is quite simple. To do this, press and hold the POWER button while the device does not disconnect, after which press the entire Power button again to turn it on again in normal mode.

It happens when the iPhone, iPod or iPad refuses to leave the recovery mode. The device enters the Recovery Mode Loop mode. In this case, to bring the device from this mode, you need to use special utilities like Tinyumbrella, Redsn0W, RecBoot.

The Apple Californian Brand Smartphone is a technological thoroughness, multiplied by the absolute practicality of the device, and all this is erected into the degree of reliability. Such an approval in favor of the American company mentioned today is a kind of a priori in the mobile device industry. But ... no matter how perfect qualities didn't have a "apple" phone, and without a kind of kind can be considered recovery iPhone, in critical situation The user will not be able to do with the definition, since the IOS operating environment is a system, the operation of which is conjugate with the mandatory process - setting functional. About this option and how to use it, you, dear reader, and have to learn from the material of the article provided.

"The trouble came, from where they did not wait": Briefly about the causes of problems for the iPhone

Like any other computerized system, iOS is at risk of software failure, which ultimately can affect partial or complete inoperability of the device as a whole. Since the iPhone, first of all, is an individual communication means, its functionality provides the ability to organize certain settings in accordance with the preferences of the user: the brightness of the display, the font size, the type of alert, and a number of other changes. At the same time, you should not forget that the iPhone is a multifunctional mobile device that can interact with its owner by means of the installed software. The iPhone Recovery Mode will be a requested tool in the case when the user makes an incorrect installation of a particular application or implements third-party software solutions (with active Jelbreak), as a result, negatively reflected on the full functionality of the device.

As a reference: the concepts of "upgrad" and "rollback"

Called "iPhone recovery mode" is meant as a realizable return method to initial settings Device, so to speak, to factory installations and the execution of an operating environment update algorithm by full replacement system files. At the same time, the version of the OS can be left for the same or increase to the current state. The two points described above are fundamentally different. Therefore, the user must decide which one is most appropriate in terms of implementation. However, in order to determine which method is most rational, you should pay attention to the signs of a malfunction and only then use the iPhone recovery mode.

Analysis and diagnostics

So, first of all, it is necessary to understand what exactly happened to the phone:

During the operation of the communication device, systematic "glitches" are observed.
The phone "hung" and does not respond at all by pressing the navigation keys.
At the first stage of downloading IOS just "hanging" the logo, without explicit signs of the activity of the OS.
When you turn on the phone and nothing more ...
Mobile apparatus spontaneously reboots.
The user is firmly sure that the phone was not subjected to any mechanical impact, while stopped working either one of the device devices: bluetooth, Wi-Fi or camera.

How to enable iPhone recovery mode: step-by-step instruction

Do not immediately resort to the cardinal measures, one of which is considered to be the direct process of flashing. It is likely that the elementary "reset" will become exactly the means of restoring the performance of the illuminated communication device. Perhaps the activated "Recovery Mode" is able to cure a mobile ailment. Start S. simple solutions And only in the case when they are useless, proceed to more serious scripts of iPhone reincarnation.

Step number 1: Banal reboot

You must simultaneously hold the "On" and "home" keys and hold them in such a state for 10 seconds.
After the logo appears in the form of the phone will begin to "revive".

Step number 2: Traditional reset over the settings menu

IPhone 5 recovery mode can be activated by using standard tools Device.

Go to the "Settings" menu.
Then go over the "Basic" tab.
Activate the Reset item.
From the list that appears, select the most acceptable view of your memory cleaning.

Step number 3: how to enter Recovery Mode

In order to use this recovery mode, the iPhone 5S or the similar device of another modification must be completely turned off.

Click the "Home" button and holding it down, connect to the phone USB cord From the kit.
Only after the iTunes and USB logo appears on the mobile screen, the key can be cleaned.

Of course, the connecting cable must be connected to the computer on which the current version of the above-mentioned program for working with the iPhone must be installed. If all your actions are completed correctly, a service message will appear on the monitor that informs that the connection is successfully completed.

Step number 4: Return to the initial state of iOS through Recovery Mode

Knowledge on how to enable iPhone recovery mode is not enough to correctly and correctly make the entire process of this kind of software.

After you connected, a system invitation appears on the screen with three displayed (at the bottom of the window) with the buttons: cancel, update and restore.
Your choice is the last of the listed options.
In the iTunes program that opens, you also need to activate the Restore key.
After that, the recovery process will begin.

Step number 5: IOS update (Device Firmware Update)

Enter iPhone in mode dFU recovery It is simple enough, however, you should not forget that after the subsequent firmware process, all user information from your device will be destroyed. Therefore, if such an opportunity is available, you must need a backup of the data before.

Connect the phone to the computer using a USB cord.
Turn off the device completely.
Hold the "Home" button and "On" for 10 seconds.
After the expiration of the above time, release the inclusion key.
After some time, a message will be displayed on the computer screen that the recovery of the iPhone 5 (modification is indicated as an example) is activated, that is, you can carry out further actions with the phone.

Step number 6: Firmware bypassing the device's operating system

Although screen iPhone The devices continue to frighten with its display black (it means "Device Firmware Update" mode), iTunes defines the connected device and displays the corresponding message to the monitor. The restoration action algorithm remains the same (see Step No. 4). However, in the DFU mode, the firmware process is most correctly, since the memory of the smartphone is subjected to primary formatting and the operating system is installed in the cleaned area of \u200b\u200bthe mobile drive.

Download from the official site apple support actual version iOS.
Hold down the "SHIFT" key, click the Restore button.
Specify the directory in which the downloaded IOS version is located.
After a short firmware process, the user is given the ability to return the saved data (backup) to the updated device.
If you do not have backup, Just disconnect the phone from the computer and deactivate the recovery mode.

iPhone 4 or Apple Device other modifications can not be easy to flash version of iOS.. However, this restriction is a purely official nature, since today there are a lot of ways, with the implementation of which the older (rather than established initially in the phone) systematic software, so to speak, which manifested itself with a steadily working, may well be installed on the iPhone without any further Negative consequences. By the way, enjoy incredible popularity among owners of presentable Apple devices, as they allow you to significantly expand the functionality of "canned" capabilities official version iOS.

Finally

So, before moving the iPhone to the recovery mode, it is necessary to be firmly confident in your actions and the correctness of the selected software repair algorithm. Meanwhile, it may well be that the user will use a cloud update option - "icloud". In this case, you need to charge the phone and be prepared for the recovery process will become a somewhat protracted occupation. But guarantees (when using this method) that everything will pass with due success, no, since often the speed of the Internet connection leaves much to be desired. Success to you in the implementation of the recovery process and stable work Your iPhone to Device!

Recovery mode (DFU) - Special iOS mode, used to upgrade or restore the device via iTunes. It is mostly necessary only in cases where the device has not been able to upgrade "by air" or works with failures caused by an incorrect installation of OTA-update.

How to enter DFU mode on iPhone X:

Step 1: First of all, iTunes on your PC need to be updated to the latest available version. If the program is updated and open - close it;

Step 2.: Connect the iPhone X to the computer using lightning cable - It is supplied complete with a smartphone. Open iTunes;

Step 3.: At the same time, clamp and hold the side button for 10 seconds and the volume key to reduce the volume;

Step 4.: Release the side button, leaving the loudness reduction key for another 15 seconds;

Step 5.: In iTunes, a message should appear that the iPhone is detected in recovery mode. The smartphone screen should remain off.

Ready! You entered DFU mode and can restore or update using iTunes on PC software iPhone.

How to understand that the iPhone has not switched to DFU mode:

Apple logo is shining on the screen;
The iTunes logo is shining on the screen. This means that the iPhone is located in Recovery Mode, which differs from DFU mode;
iTunes does not see the connected iPhone.

Note: If you want to exit the recovery mode, disconnect the iPhone from the computer and press the power button.

I think, almost all the owners of the iPhone and iPad, at least once, but fell in a situation where after installing the next tweak or simply during the execution of the jailbreak, the gadget or system failure simply refuses to load in normal mode. What to do, how to and where to seek help? Do not hurry, you can restore the performance of the iDevice on your own at home, as they say: "Recovery Mode to help you."

You can restore the operating status of the iPhone or iPad in almost any situation.Of course, if the reason for breakdown software. To do this, the iPhone recovery modes (for example) are composed of:

DFU mode (Device Firmware Update) - device firmware update mode
Recovery Mode. - Recovery mode.

Before proceeding directly to the recovery procedure, let's see what the recovery mode is, how to enable iPhone in recovery mode and how to output it from this mode.

What is Recovery Mode?

Recovery Mode.that translated from English means "recovery mode" is an emergency mode designed to restore the worker iPhone status or any other mobile apparatus running iOS when program malfunctions occurred to disable the machine and the impossibility of loading it in normal mode.

Recovery mode, like DFU MODE, belongs to special modes provided by the manufacturer, so for the safety warranty obligations When entering these modes, you can not worry.

What is needed by Recovery Mode?

The iPhone recovery mode is accomplished, used when the gadget is not loaded in normal mode (the display does not submit signs of life, the device does not respond to pressing the control buttons).

How to enable iPhone recovery mode?

You can translate iOS devices to this mode from any state using simple clicks on the "Home" and "Power" buttons for this:

Fully , iPad or any other iOS device in any available way;
HOME«;
Connect the iPhone with USB cable to the computer (it can be Windows PC or Mac) holding the " HOME»Pressed;
The image screen appears on the iTunes icon and the standard USB cable, this will be a confirmation that the iPhone is loaded in Recovery Mode;

IPhone in recovery mode

Run iTunes and make sure the device is loaded in recovery mode.

Warning iTunes on recovery mode

Device in recovery mode in iTunes

How to get out of Recovery Mode?

Exit the recovery mode is easier than to enable it, for this you need to restart the device in the usual way:

Disconnect the USB cable from iPhone;
Long pressing the shutdown button ( Power) Disconnect the device;
Short pressing all the same Power"Turn it again;
Wait for the device loading in normal mode.

There are cases when the iPhone or any other iOS device refuses the standard method to leave the recovery mode, not the trouble, in this gadget you can help:

Turn off the iOS device (long press the button " Power»Or simultaneous long press buttons HOME"And" Power«);
Disconnect the USB cable from iPhone;
Press and hold the " HOME"And briefly press" Power"Before the appearance of the Apple branded logo, the button" HOME»Continue to hold down.

Sometimes, it is especially important for owners of jailbreaked iOS devices, in the process of jailbreak or flashing the device, it is automatically loaded in Recovery Mode, signaling about the programmatic program, and no standard manipulations (normal reboot, forced reboot) do not help, the iPhone is stuck in recovery mode.

Bring it out of such a state will help special programs Tinyumbrella. (official website) and redsn0w. (site developers).

There are some more, but these two with "head". Note that programs will help display the iPhone (for example) from Recovery Mode only if system errors occur when recovering or updating in iTunes.

Additional tools in redsn0w.

Recovery B. redsn0w.

Wizard output from DFU in redsn0w.

What is the difference between Recovery Mode from DFU mode?

The key difference Recovery Mode is that each process of updating or restoring the firmware through iTunes comes from Recovery Mode. Even if you update iPhone firmware, for example, in normal mode, iTunes in the process of flashing automatically, without user participation, translates the iDevice to the recovery mode and the iOS update comes from this mode.

Recovery Mode is a software mode, in this mode, the iOS device responds to pressing the control buttons and what is very nice, enter and display the iPhone from the recovery mode can be programmatically.

Video instructions on the topic "How to enable iPhone in Recovery Mode"

About the main thing in a few words

Suppose that after the software failure caused spontaneous restart iPhoneThe device stopped responding to pressing controls, nor "home", nor "Power", the screen completely went out and even long pressing on the power button do not give results. What to do and how to be how to restore the iPhone?

Translate device B. recovery mode (How to do it. See above), connect (if you have not yet done) it to a computer and run iTunes. After the program recognizes the iOS gadget in the "Stabilization / Recovery mode" mode, in the program window, click the desired button (restore or update).

As a result of non-good manipulations, you will be able to restore the performance of the device at home in 90% of cases. If you hit the number of the remaining 10%, please contact the comments to this instruction, we will try to help you!

There are cases when when updating the Wi-Fi firmware or system, your iPhone, iPod or iPad refuses to load in normal mode. If such a problem occurs, do not be discouraged, it can be solved by almost in any situation if it originated on the program level - it will only be necessary to restore the firmware. On devices with operating iOS system Update and restore the firmware can be implemented simply by moving it into Recovery or DFU mode mode.

In this article we will tell you what is Recovery Mode, how to enter and exit this mode. ABOUT DFU mode You can read in our article How to download iPhone and iPad in DFU mode

Recovery Mode. - This software firmware mode in which basic system files are not affected, only their integrity and recovery is checked, the settings and IOS parameters are reset, and changes are made when the changes are made, if any.

If on the device screen you see the image of the USB cable and iTunes program icon, then your gadget is located in Recovery Mode. In this mode, the device goes as soon as you start the process of upgrading or restoring the iOS using iTunes on the computer either yourself transferred iPhone and iPad to Recovery mode.

How to enter Recovery Mode mode

Translate iPhone, iPod or iPad to Recovery Mode mode can be absolutely from any state of the device.

Step 1 Turn off the iOS device. Hold and hold the POWER button until you appear on the slider screen with the inscription, turn off, then drag it from left to right to turn off the device

Step 2 Press the HOME hardware button and not releasing the buttons Connect the iPhone / iPod / iPad to a computer using a USB cable. On the iOS-device screen, an image appears with iTunes icon and a USB cable, meaning that the device is loaded in Recovery Mode mode

Step 3 On your computer, run iTunes to make sure the device is in recovery mode

Now you can easily make a reset and restoration, as well as the gadget firmware.

How to exit Recovery Mode

It happens when the iPhone, iPod or iPad refuses to leave the recovery mode. The device enters the Recovery Mode Loop mode. In this case, to bring the device from this regime, you need to use special utilities as Tinyumbrella., redsn0w., RecBoot..

Read more tips in our publicumes in social networksand also add an article for yourself in bookmarks