Acronis Disk Director issues an error when rebooting. Windows does not boot after working with Acronis Disk Director. Do not think that RAID and backup are synonyms.

Question: Working with Acronis Disk Director 12

Good afternoon!
The problem is next. I purchased the program Acronis Disk Director 12, I am trying to increase the place on the disk of S. But what would I do, after rebooting everything remains like it was!
What could be the problem.
Thank you

Answer:

Off-topic:

Message from Sapando.

i can't! Because Disk D is busy information, but temporarily merge it is not possible!

And the time, the place and the ability to engage in the restoration of information (if Acronis is accomplished) you will find?

And if on the topic, then with such programs work from loading media, and not from the system.

Question: Acronis Disk Director

Hello everyone.
Hard on 500 gigs, 120 of them - a local disc C. The other day almost ended the location on the disk C and I decided to add from the disk D. separated from the Disk D 20 gigs and stuck to the C drive. Rebooted. When loading, this error takes out:

I tried to recover from the Windows disk, it writes that the disk is blocked. With the installation disk I tried everything, nothing works.
F8 and the remaining buttons do not work, only in the BIOS via F2 enters.
Help who has been there

Answer:

Off-topic:

alexnavin.
And what?

In the results of the request formed by me, the first link (suddenly) leads to the topic on this forum in which the newcomer asks about a similar problem. At the same time, he shows that it was not alien to finding him. So, the registration date and number of the message is not indicative.

Question: Disc D is displayed as RAW after operations on local disks Acronis Disk Director

Good day. The problem is as follows: disk D is displayed as RAW after operations on local disks using Acronis Disk Director.
I believe that it is possible to restore access to the disk without losing any information from it.
Please help.

Answer: Good luck came to me: from all sections D, who found a DMDE, only the directory was displayed in one correctly. I deleted the one that was set as the main one, and the one in which the folders were correctly displayed, prescribed the main one. After rebooting, access to the disk returned. Primary inspection showed that the information is in place.
However, my goal has not been achieved: I intended at the expense of a free disk D, to increase the size of the disk C. As already said, the tool chose Acronis, which led to failure.
Can you tell how to do it better?

Added after 2 minutes
By the way, it drew attention to the fact that "disk management" shows the volume of the disk D 278.55 GB, but in the conductor it is indicated that the volume is 241 GB. How to fix it?

Question: After working with Acronis Disk Director, Windows does not start, loading stops on the logo

Sorry in advance one more wrongdohat, which decided to use Acronis "Ohm)
There is a stationary comp, one hard at 500GB, another on 1TB. Hard on 500 was divided into 46GB (C) and 420GB (D). Windows Seven was stood in a section where 46GB.
Since the memory on the section with the system was almost always in the Red Zone, I wanted 20GB to take from the second section and throw them into this one. Acronis Disk Director 12 has been successfully cut off 20GB, but after adding them when rebooting issued something like this:
ERROR OCCURRED:
Text Error While Loading Configuration File
Code: 00000000009B0001 C99355CCD3E906BB
SUBERROR:
Text Error: The Specified File Does Not Exist
Code: 0000000000040011 8A6441D30679BD24
SUBERROR:
Code: 00000000d0000034 BD28FDBD64EDB8C6
Press to rebooot.
After pressing ENTER, "a computer was exhausted only before the screensaver with the laborer inscription. The BIOS does not open at the same time. Select from which it is also impossible to start. When the hard is turned off, all LiveUSB are loaded. With no connected, for, I can not choose from what to download.
He took the computer from a friend, the hard is recognized in it. But only opens the system section (C). Section D with programs, games, documents does not open. When you try to open, gives a message that the disc is unformatched and offers its formatting.
It is undesirable to formatting, I would like to save all the information and the system itself, if possible. I realized that I could not do it myself, so I appeal to help you, good people)
With the disk no longer manipulated, except for opening folders on the S.
I attach an image with DMDE, CrystalDisk and how it looks like partitions in drive control

Answer: Sorry for disturbing. The last days were, there was no time to treat the computer. Of course, I would like to go and try to deal with the difficult path and try to figure out the reason, but I decided to save time and formatted the entire disk, and then I set it all over again. Thanks to everyone for the help who responded!

Q: Acronis Disk Director killed (?) Hard disk

Hello, dear members of the forum!

Situyevina Such (I will from afar): on a computer 2 hard disk (railway) - the main one for 1 TB, and so soak (music, etc.) by 300 GB. I decided to expand the logical disk where OS (Win7Prof) is installed. The tools were not used to work, always approached dramatically - through the installation disk I approach the railway (pre-making images of logical disks (LD) Acronis.tru. Image.home.v11_en - atih), I kill all sections, make new, with the size it, And through the Acronis boot disk restore the data.

I looked a little bit, did not turn off the pre-2nd railway, and deleted it (through the boot disk). After restoring all the data on the main railway, I downloaded Acronis Disk Director (Add), restored the 2nd railway. And then it began ...

First, ATIH did not see the main railway (file 00 in the attachment). When you try to search with other means, only an external disk sees (file 11). When attempting to imagine ATIH does not see anything at all (file 22).

Began through the installation disk to approach the main railway, he sees LD, but nothing can do with them - all menu items are inactive (DSC files). Only the item "format" on the system LD is active. Formatted, installed OS from a boot disk, sees wheels (File 33)

As soon as I try to do something through ATIH - all at first - he does not see anything, and when Bios is rebooting, he says that he does not see the OS. And all first ...

I tried to connect the third railway, it I have with WinXP SP3, for a working company - so everything is there only through BSOD - just trying to boot, immediately bsod ...

Reset the BIOS - the battery pulled out for 10 minutes - it is useless ...

Now I want to try a railway from work, a specially computer brought, on it WinXP SP3, but I am afraid - what if I kill him? At work, the ball will demolish ...

Who has any considerations? Who faced with this? Is this an add naked? After all, it all started ... I have no suspicion to ATIH - it is this package that I have 10 years old. Or is it all the same as a railway sofh? Just a coincidence? For the information, I do not worry, I have everything in the images of Acronis, but for the waiting for a shame - there is money ...

Answer:

Message from Tau_0.

9285 Now as grandfather Lenin

So, so be. Good luck to everyone, and thanks again for participation.

Question: Acronis Disk Director shows 2.023 MB unblocked space

Acronis Disk Director shows 2.023 MB of unbalanced space on two different computers. Although the parogon nor other programs see this space. This is an acronis glitch or it is so advanced and sees what others do not see?

Answer: MizhonikSupport [Email Protected] But the problem is not in this, just an acronis shows the space used to align sections. In short, everything is fine, do not touch this space. So it is necessary

Question: After changing the size of the system and information sections, the Acronis program does not load the system

After changing the size of the system and information partitions, the Acronis Disk Director program has stopped loading. When you turn on the PC, the Windows window appears later the inscription Acronis Disk Director and then goes on a reboot. And so continuously.
What to do? Windows 7 system.

Answer:

Message from top1956.

What to do?

If you cannot boot into the OS from a problem disk, use any LiveCD and lay out the DMDE and Crystal Disk Info screens.

Q: Win 7 is loaded only in safe mode after Acronis Disk Director

Hello dear members of the forum!
Weakly own the technical side of the question, I hope for understanding.
A month ago, there was a need to expand the C drive on the laptop: at the expense of D: (both on one physical). I tried to do it first using the program Diskgenius 4.6.5 (rutracker.org/forum/viewtopic.php?t\u003d4754783&start\u003d30). The experiment ended with a strange blue screen (as if glued out of two) after applying changes, but no changes after rebooting did not happen. Next, I took advantage of Acronis Disk Director 12 (also from under Windows) and prescribed to bite off from D: 10 GB (or a little less, I do not remember) and sew to systemic C:. Then after the reboot, when loading the Windows, a system message is about need, and then the impossibility of checking the disk (apparently, CHKDSK). The message "Welcome" appears and the cursor is spinning, but the system does not respond further.
In safe mode, it is clear that the Acronis was still bitten, but did not sew. It seemed to me that in this failure could be to blame the paging file (on the disks is allocated exactly 2 GB). Both disks in this mode are operational.

Actually, how to restore the usual loading mode and return the lost GB-you. Is it worth it to repaint drives on a laptop from under Windows any prog?
I bring the list of reading 0-100 sectors of the DMDE program (need some others?). Screen Smart and sections. Thank you.

Answer: easyKey.
Yeah, a phantom such key - in the usual mode one, in a safe other.

Question: Windows does not load after formatting the Acronis Disk Director section

Hello!
Such a situation: on a computer 3 Windows 7, one extra, tried to format the section with it, it did not work out, delete folders, also not rolled.
Installed Acronis Disk Director, chose the formatting of this section with Windows, the Acronis asked to reboot, OK, some actions of the acronis on the screen, and now after the motherboard is a black screen (with cursor).
I tried to reinstall Windows, so when rebooting again this black screen, does not allow reinstalling.
What could Akronis do how to fix? It is advisable to obtain data from one section (systematic with the desired Windows).
Winchester 2 on the computer, each divided into 2 partitions.

Added after 4 minutes
I used bootrec.exe, first FixBoot, then FixMBr, now the SCANOS command responds that 0 Windows systems found, although there was one.

Added after 45 seconds
Also used bcdboot.exe, did not help

Added after 1 minute
Uploaded the system with LiveCD, the same acronis drive director, all sections on the spot, the section is really an acronis formatted.
It is not clear why so fatal it ended and nothing helps.

Answer: I entered all 4 combinations of the BCDBoot command with the letters C and D, now I have both systems from both HDD.
Moreover, on the first HDD, the default system is loaded, which is installed on it and also on the second HDD by default, the system installed on it. This is done simply - the last BCDBoot command sets the default system, that is, if you need to change it, you will repeat this command again for the desired system and HDD, the third record in the loader will not appear, which I first feared

Question: After using "Acronis Disk Director 12" is lost a few gigabytes

I understand that I made a deepest mistake, using this not a good program. It was necessary to transfer from disk D to C, gigabytes, but at the second stage a lot of errors got out. And the computer rebooted, gigabytes that I wanted to transfer with D lost in the dive, C remained with the same volume. I lost quite a lot of gigs ... Help them return, I saw a similar topic, but nothing really understood. I have Windows 8.1x64, if you still need I give, just help please!

Answer: As for I agree, I think the perfect programs find hard (most likely to create too), in fact you look at them they are the same, and it seems no, you will be lucky if the program does something bad, but not very bad. Some I read after Akronis at all the disk D openly stopped, the benefit did not happen to me, I don't understand the computer sphere of hard drive, and I had to find what I would do everything for me, it turned out of it, but later it turned out That he helped me, I learned this problem, I learned something ... I know a lot about computers, but the computer know completely impossible and increase the experience, albeit dangerous ways, it certainly does not hurt. True ... the main thing is not to overdo the danger)))

All users can be divided into two groups: on those who regularly make backups and those who have not yet started doing them. If you feel about the second category, it means only that you are not good or fully or not fully imagine the quantity and scope of troubles that can damage your data - theft, fire, hurricane, viruses, software bugs, iron breakdowns, errors users and everything in such a spirit. Well, or have not come across the passage of the "quest" to recover data after their loss (which, unfortunately, it is not always possible to successfully). Whatever it was, it is better to know in advance what mistakes should be avoided during backup copying, so we present to your attention eleven errors when creating a backup. It is not even so much mistakes as tips and a list of strategies that should not be used (first of all for Mac users). Welcome to Cat.

1. It is impossible not to make backups

The recent post of Backblaze shows the annual survey data, which showed that only 8% of respondents make backups every day (a couple of years ago, this figure was greater), 16% make backup once a year, and 25% do not at all. At the beginning of the summer, we also conducted a survey, the results of which are no less frightening - 90.6% of respondents are not ready to lose data, while only 74% of respondents make backup copies of important data (from which 57.9% use only an external drive).

Do not do anything - this is one of the worst approaches. You hope that, regardless of your (or foreign) actions, everything will work perfectly, but no computer will be able to guarantee this - sooner or later you will lose the data and regret it.

2. Cannot rely on funds and data recovery services

If you accidentally deleted the file from your MacBook, there is a chance that you can restore it using special programs to recover data. If this could not be done (for example, if the drive itself was damaged), then there is a hope of only specialized data recovery companies. However, it is simply stupid to believe that you can use one of these ways. Sometimes the cause of the loss of data becomes theft or unscheduled meteoric rain, with the result that you simply will not have a disk, which could be carried out all the above operations.

3. Do not hope for auto storage

Indeed, some applications perform automatic saving documents, giving you the opportunity to start from the place where you stopped, even if the file was never saved with the name (an example of such an application - BBEDIT). However, not all applications work in a similar way. But even if they work, there are always situations when users randomly or by mistake delete auto storage files. It is no secret that most backup systems suggest that the user will at least save and call a file - often autosave only after this step.

4. Do not make backups manually

There are many people who perform the backup of the entire system (or, at a minimum, part of the files) when their soul, creating clones or copying files to another disk manually. Of course, it is better than nothing, but this is a very unreliable and non-permanent approach - there are a thousand and one reason not to make a backup one day. And according to the law of meanness, it may well happen that you lose the data that is exactly the day when you forget or do not have time to perform a backup. Therefore, automatic backups are more reliable option. Even, perhaps the best.

5. Cannot relying only At Time Machine

Time Machine is a wonderful (free) tool built into OS X - Apple made a faithful bet on simplifying the backup procedure. Time Machine is good . But it is not entirely worth it to completely trust this time. For example, in the article "Why i don't Rely On Time Machine" ("Why I do not trust Time Machine") the author says, as faced with an incorrigible error Time Machine, as a result of which he had to clear all the backups and start copying everything again . The discs were in order, but the data is not. Even the pivot recovery tools did not help. Time Machine can work perfect for years, but it is worth it to stumble at him at least once ... Although Time Machine and the reliable utility (and copes well with his work as auxiliary backup tool), but it is better not to bet only on it.

Something else about Time Machine: If you "flew" the entire disk, then its formatting or replacement with the subsequent recovery of the backup will be the case - this process can take long hours. During the procedure, you will not be able to use your Mac, so we strongly recommend making boot copies of the system or "clones". But this leads to another problem ...

6. You can not use only Clons

Clones are a great thing. If something went wrong, they allow you to return to work almost instantly (restart the system while holding the Option, and select a clone). Also, the clones make it possible to roll back the system to previous versions of OS X, if the update passed with errors.

The problem is that clones do not give you the opportunity to restore randomly remote files or access their earlier versions if the clone has been updated (some applications provide file archiving capabilities, but here you need to understand what you are doing). Another problem - the clone is stored on your MacBook, so if something happens with the computer (Tornado, robbery), then with him the only backup will disappear. This problem leads us to the following conclusion ...

7. You can not store backups on one machine

The hypothetical meteorite can destroy the house in California, but it is unlikely to be able to destroy the CrashPlan Data Center in Minnesota, and in other places where you can store your data. This also applies to data, lost as a result of theft, breakthrough of pipes, fire - misfortunes are much more likely than the fall of the meteorite. If your backups are stored on a local machine, then they are protected only from a certain circle of dangers. This problem is easy to solve, simply by giving back to a friend or, for example, by placing them into the cell of the bank. You can also use Crashplan, BackBlaze or Dollydrive cloud services. In short, make you a backup on the side.

But, oddly enough, the opposite statement is also true. Not worth it ...

8. ... have only online backups

They are ideal for a huge number of situations, here's just restoring a multifabital chickel of data from a cloud storage (forget that about a whole disk) can take a long time. In such a situation, you are limited to the bandwidth of the communication channel of the Internet provider. And some providers still have a limit of downloadable data, so the recovery procedure can be solidically delayed. That is why, in addition to the "cloud", you should always store local backups (of course, if you want to boot from the clone, it should be on a local hard drive).

The following two errors also refer to online backups.

9. Do not use exclusively Dropbox (or similar services)

Dropbox is an excellent and very convenient tool, although many other cloud storage (ICloud Drive, Box, Amazon Cloud Drive, Google Drive, Yandex.Disk, Microsoft Onedrive, etc.) have about the same set of functions. Most of them even offer a primitive backup feature that restores old or remote files (if not more than a month).

All this is good, however, such services are more suitable for storing a small number of files than for a complete backup of the system or the entire disk. In addition, in most services, free space is quite modest in size, while an additional place to store a large amount of data will be a regular and tangible cost of expenses.

10. Do not think that web applications do not need backups.

Do you use Google Docs, Office 365, IWORK for ICloud or other web applications (koi's random) to create and share documents? Many of us use these services at least occasionally. It's good, but do you make local copies of these documents? If the answer is "no", then it is bad.

You can list a lot of cases when people opened Google Docs (or something else) and found that an important document disappeared for an incomprehensible reason. And what to do in such a situation - it is incomprehensible. Such situations arise infrequently, but believe me, they arise. You should not count on the fact that the cloud service will adequately restore lost data, or that you will be able to do it yourself (even in the presence of data in the cloud you will not always be able to access them because of problems with the server or your Internet connection, and It will happen at the most inopportune moment). Therefore, it is better to make your own cloud paper backups. You can use special utilities, for example, CloudPull (see the article "Back Up Your Google Data With CloudPull" ("Making Google Documents Backup with CLOUDPULL"), even though it is old).

11. Do not think that RAID and backup are synonyms.

RAID combines several rigid disks into one logical volume. One of the RAID settings options is a mirror RAID (RAID 1), which is most often confused with backups. The essence of RAID 1 is that each block is recorded in two different physical disks, thereby ensuring 100% redundancy (RAID 5 and 6 also provide redundancy, but in other ways). It is not quite cloning, because the data is always relevant and updated. Is it wonderful?

In fact, not always. It is constant updates that are part of the problem. If you accidentally deleted the file, it will be removed from both RAID disks. If a directory or file was damaged, a virus penetrated to you or an even problem occurred, it will equally affect both disks. Of course, if the array was stolen or damaged, the files will be lost. RAID 1 Protects your data only in case of failure of one of the hard drives (it happens) and nothing more. So remember that the disk array is not synonymous with the word "backup".

I do normally - it will be fine!

It's great, if during reading this list of ridiculous errors, you made sure that your backup strategy is perfect and deprived of the deficiencies described. If it is so - we hope you were interested to look at how the remaining 92% of the population live.

However, if you have learned yourself at least in one of the items, do not rush to get upset - we just did EOT post to help you fix it. We all passed through it. It is necessary to understand the errors and correct them, especially when it comes to the safety of important data. Just backup right now, after reading the article, considering the errors mentioned above - after that you can be sure that no meteorites will destroy your data, and you can direct efforts to more important tasks, for example, to protect against zombie :)

. You can get such an error when working in the Acronis Disk Director program, which is a manager of the hard disk partitions.
An error may exit when performing various operations in this program, but most often with an increase in the space of one disk by another, for example, an increase in the disk space C: due to D: on a laptop and a simple computer. The cause of the error does not always lift in damage to the file system of the hard disk, and checking the partitions of the hard disk on the errors of the results may not give.

The file system is damaged

Hi friends! The reason for writing this article was comments on the other article. In some users, after working with the Acronis Disk Director program, such a situation was observed in "Disk Management" - when separating the space from the disk D: This very space disappeared to nowhere, the program of Acronis Disk Director, in turn, did not show that the operation is successful The D disc is carried out: it became less, and the C drive C: more.
For work, I also had to often face such a task and she has a solution.

What is interesting, such an error "The file system is damaged" may not be, you just work out in the Acronis Disk Director program, then reboot and be very surprised by entering "Disk Management", one disk will become smaller, and the other will remain as it was.

The last time I ran into such an error like this. At work, a sysadmin neighbor approached me and says with a whisper: "Listen, I have some kind of mystic, it seems yesterday I didn't drink." On a laptop with an installed Windows 7 operating system, you need to increase the disk space C: Acronis Disk Director program, take the space from the disk E: and I attach it to C:, and after the reboot, this space disappears to nowhere, the disc C: remains the same, and the disk E: It becomes less and less with my attempt.
In the "Disc Management" of this laptop there was such a picture, the C drive C: occupied the volume of 97 GB, and the E: 650 GB disk. Letter D: was busy with a drive, so we will work with disks C: and E:.

The task is supplied to this, take from the disk E: 100 GB and attach to the C: 12 GB to be connected to the disk.
In this situation, using the tools of the operating system itself, you will not check such an operation, so I decided to use the Acronis Disk Director program,

After booting from the boot disk of the program, I first plugged off the disk E: 100 GB. Click the right mouse on the disk E: and select "Change the size of volume" in the menu,

this window will appear. Change the size of the selected volume (E :) to a smaller way so that the unoccupied space turns out to be before tom (E :) and after the disk (C :), we put 100 GB, then weighing the volume to add to the disk (C :) and it will be at 100GB more.
We cling to the right mouse for a kind of deraitant and lead it to the right, thereby reducing the disk space E: 100 GB and press OK. An unassigned space of 100 GB appears.

Now we are already taking the right mouse on the disk C: and select the "Change the size of the volume" in the menu,

The following window will appear. In it, we have a delimiter to the right to the end, this is the most increasing disk C: per 100GB and OK.

Our program operates in a deferred operation mode and that all of our actions work must click "Apply Waiting Operations" and "Continue".

Here are the attention of friends, sometimes there may be a mistake " The file system is damaged. Use the check tool to detect and correct file system errors". What to do? I tell further.

We make a way out of the Acronis program and reboot.

After rebooting, we immediately enter the "Disk Management" and see a strange situation. C drive C: What was the volume of this and remained 97GB, and the disk E: became less than 552, 13 GB.

At this time, you begin to indent me and my article and another Acronis program, and in, in the meantime, I begin to ick accordingly.
Again, you boot from the Acronis Disk Director program disk. We do this. Withdraw from the disk C: or D: a small piece of space and leave it unallocated, then loaded into the operating system and connect it back to the disk from:, but already using the Windows Disk Management Program.
Right mouse on a C drive: and select "Change the size of volume" in the menu,

Sometimes it can happen that after downloading boot versions of Acronis products, a message is displayed: Error E000101F4: No hard disk is found.

1. Perhaps the wrong MBR. Only one partition may contain the main boot record and therefore the hard disk is not supported. This is often happening if the hard disk was formatted by the manufacturer. Repeated disk initialization is required.

2. If the Acronis product reports that hard drives were not detected, then access to the disk with some probability is blocked by third-party software. If you have installed software copies other than Acronis, temporarily disconnect. Make sure the problem is solved. If you use antivirus applications, temporarily disconnect. Make sure the problem is solved.

3. Download the Acronis Drivers Update, download and install.

Acronis Backup & Recovery 11.5: SNAPAPI 2140 (SNAPAPI 1204 for Windows 2000)

(!) You must restart the computer to complete the installation. The Acronis Snapapi software module is responsible for all hard disk operations.

4. Try creating a WinPE-based bootable media. To create such a media, the Acronis True Image Home Plus Pack is required. On such a carrier can be the necessary drivers, because WinPE-based bootable media uses Windows drivers to access disks.

5. If there are still problems with the Acronis boot disk, then the only solution is to update the license. The version is probably obsolete. We will not develop it further.
We recommend installing the demo version of the new version in order to make sure that the program works flawlessly. Create Acronis boot disk and check its functionality.

I want to say that in most cases there is a fairly standard boot CD created using the Acronis loading media creation wizard or WinPE-based bootable media. But, if the recovery environment still cannot detect any disk, a network adapter, a mouse or keyboard, it usually means problems with drivers.
Therefore, if the required hardware driver does not turn out on the boot media, you can contact the Acronis user support service if the licensing program is asked to create a custom boot CD with all the necessary drivers.
Note that the search for appropriate drivers and the creation of a user bootable carrier can take considerable time. In addition, in some cases it may be impossible to find the appropriate drivers.

As for the update of the license. The license update is not always the only and mandatory solution to the problem. With the most likely error "E000101F4" of motherboards with the Intel processor causes the operation mode of Serial ATA controllers. To eliminate the error you need to try to change the mode of operation IDE controllers on AHCI, which is enabled in the motherboards by default. This protocol was developed by a special initiative group headed by Intel and appeared in Intel chipsets if the memory serves me, from the 915 series.

However, keep in mind that IDE controller drivers and AHCI controllers are different. Changing the IDE mode of operation on AHCI in Windows XP will be able to load the operating system, because the AHCI driver is not integrated into the distribution. And the installation of the driver on the installed operating system is associated with certain difficulties.

In Windows 7, the required driver is integrated into the distribution. Enough in the BIOS, enable the AHCI controller operation mode and the operating system itself will install the driver.

Note.
I want to add that if several Acronis programs are installed, update licenses May cause conflict between them. For example, once, updating the license of Acronis.disk.director v11.0.0.2343 to the version of the Acronis.disk.director v112.0.0.3223 in Windows 7 caused a complete inoperability of Acronis True Image 2014 Premium.v17.0.0.6673.

If instead of the scheduled sections scheduled after restarting using the Acronis Disk Director program you can only see such an error message:

ERROR OCCURRED:
Text Error While Loading Configuration File
Code: 00000000009B0001 C99355CCD3E906BB
SUBERROR:
Text Error: The Specified File Does Not Exist
Code: 0000000000040011 8A6441D30679BD24
SUBERROR:
Code: 00000000d0000034 BD28FDBD64EDB8C6
Press to rebooot.

After pressing the key The system reboots, but it turns out that normal: either everything starts first, or starts Computer recovery. In this article we will tell how to solve this problem.

To solve this problem and successful download, you must delete the file autopart.exe. From the Windows folder, and then, and from its registry. To do this, you need to do such steps:

1. Load computer recovery.

2. Launch command line:

Computer recovery in windows 7

Computer recovery in windows 8

3. Determine which logical disk is the Windows folder. (We will use the disk for example D:).

4. Enter the following commands. (After entering each command, press the key ) :

D: (Determine the logical disk with which you work)
cD \\ Windows \\ System32 (Go to the Windows \\ System32 folder)
dir Autopart. * (Select all the files in the title of which there is a word AutoPart. Usually files will be present in the sample results a.utopart.exe., autopart.opt. and autopart.cfg.)
del autopart.exe. (Delete the file autopart.exe.)

5. Restart the computer. Now Windows must normally boot.

6. Run Registry editor (Regedit).

7. Find a key HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ SESSION MANAGER.

8. Watch the multi-time parameter value. Bootexecute.. If it contains autopart.exe. - Edit Delete this string.

(The normal value of this parameter is autoCheck AUTOCHK *).

9. Close Registry Editor.

P.S. Delete a file autopart.exe. (P.P. 1-4) can also be downloaded from any LiveCD.