Radio station portable Midland G5 download instructions. Simple but effective alteration of Midland G5. Turning off the VOX function

Take the Midland G5 set for 1000-1500 rubles. The price depends on the configuration and greed of the seller. The package may also include 6 batteries or 6 batteries and charger. In principle, we need only a radio, so if there is a choice of sets with a different price - take what is cheaper.
Photo: Shop set

We disappear a footprint, which, according to the reviews of some radio amateurs, is configured to resonance in the area of \u200b\u200b467 MHz. As an option - you can lengthen it a bit of a pair of turns, approaching 446. Then the appearance of the radio will not change at all. But I like the usual Quarter-tail. Especially since the length of the tail is easier to throw on the eye with the window meter, which I described in the last note (primitive field indicator)

Filing with a squatted spring:

We remove the overall with an external insulator, remove the fever at all. As for the insulator - I put it back. But you can not put at your discretion. I leave it a little longer (Milmeters on 5), and then seal the usual silicone sealant so that the antenna's tail is not oxidized.
As an option - you can fall to the overtaken, and not to the central dwelling, but it is physically uncomfortable, although the broadband has such an antenna it will be a little better (but it is not necessary for us here.

The length of the new antenna is approximately 155-165 mm.

Once the new antenna is soldered, choose in plastic tails, where the spring was hiding, extra plastic. So that the radio can be collected, but at the same time the new antenna fits tightly.

After that, check the promotion of the antenna at the window meter from the past article. Compared with the second war, the converted to reject the arrow when PTT is pressed much more noticeable (at the same distance from the device). If this does not happen - the problem is soldered. While that even with a sneezing antenna at a short distance, the radio cares for the second, so do not be deceive, it is impossible to check this (one radio of another).

If the station has become too sensitive and opens a noise for example on the first channel when the transmission goes on the other - return a little back noise. Also, with extraneous cods on the channels, the noise can be returned a little, because The radio just became overly sensitive, which is also not very good.

Closeup - Outcome:

The new antenna is also fixed by a shrink tube, as a result, the result is at all like factory products.

If there is no heat shrinkage - you can pull the tape. The main thing is that plastic crimp a new antenna and did not give it to the soldering, then it does not disappear.

Mlow in the general case do not touch. If one radio receives the signal quieter than another, then you can adjust this outline with an impending screwdriver.

To do this, set Max. The volume on the adjustable wagon, remove the back cover, click on the second war of the tangent and bringing the second war, to achieve a small whistle at the first (customizable).

Then, turning the contour on the defiance of the wagon, we achieve the maximum volume of the whistle. On this modulation, everything.

The frequency capacitor without normal devices is generally better not to touch. Those who have a frequency meter, explain what and how to make no sense in this article, they will cope, the rest is better not to turn it.

After the antenna is repaired, my field indicator on one distance from the standard factory springs deviated about 4 times weaker than from alteration.

The range on past alterations increased by about 2 times. Good luck.

Warning: After reworking, you lose 100% warranty. If you do everything according to the instructions, it is possible to spoil the walkie-talkie. After improvements, if everything is done correctly, the range of communication in the modified set will increase 1.5-2 times.

Take the Midland G5 set for 1000-1500 rubles. The price depends on the configuration and greed of the seller. The package may also include 6 batteries or 6 batteries and charger. In principle, we need only a radio, so if there is a choice of sets with a different price - take what is cheaper.
Photo 1 - Shop set.

Remove the back cover - photo 3.

On photo 4 arrows showing the place of adjustment. First of all, we are interested in the noise, but we will deal with the antenna overpass.
Photo 4.

We disappear a footprint, which, according to the reviews of some radio amateurs, is configured to resonance in the area of \u200b\u200b467 MHz. As an option - you can lengthen it a bit of a pair of turns, approaching 446. Then the appearance of the radio will not change at all. But I like the usual Quarter-tail. Moreover, the length of the tail is easier to throw on the eye with a window meter, which I described the note (primitive field indicator)
Walkie-free walkflower - Photo 5.

Next, we take a donor wire for an antenna. In my case, this is an ordinary TV cable. Photo 6.

We remove the overall with an external insulator, remove the fever at all. As for the insulator - I put it back. But you can not put at your discretion. I leave it a little longer (Milmeters on 5), and then seal the usual silicone sealant so that the antenna's tail is not oxidized.
As an option - you can fall to the overtaken, and not to the central dwelling, but it is physically uncomfortable, although the broadband has such an antenna it will be a little better (but it is not necessary for us here.

The length of the new antenna is approximately 155-165 mm.

Once the new antenna is soldered, choose in plastic tails, where the spring was hiding, extra plastic. So that the radio can be collected, but at the same time the new antenna fits tightly. Photo 7.

After that, check the promotion of the antenna. Compared with the second war, the converted to reject the arrow when PTT is pressed much more noticeable (at the same distance from the device). If this does not happen - the problem is soldered. While that even with a sneezing antenna at a short distance, the radio cares for the second, so do not be deceive, it is impossible to check this (one radio of another).

Next, turning on the radio, turn the noise clockwise clockwise until the station starts hissing. After that, quite a little twist countercloth so that the hiss is gone.
Be careful, different home appliances can be found at different frequencies. For example, I have a 3-channel PMR phonite router. When setting, if there is frequencies with the background, it is better to configure the clean channels.
If the station has become too sensitive and opens a noise for example on the first channel when the transmission goes on the other - return a little back noise. Also, with extraneous cods on the channels, the noise can be returned a little, because The radio just became overly sensitive, which is also not very good.

Photo 8 Closeup - Outcome work.

The new antenna is also fixed by a shrink tube, as a result, the result is at all like factory products.
If there is no heat shrinkage - you can pull the tape. The main thing is that plastic crimp a new antenna and did not give it to the soldering, then it does not disappear.

Mlow in the general case do not touch. If one radio receives the signal quieter than another, then you can adjust this outline with an impending screwdriver. To do this, set Max. The volume on the adjustable wagon, remove the back cover, click on the second war of the tangent and bringing the second war, to achieve a small whistle at the first (customizable). Then, turning the contour on the defiance of the wagon, we achieve the maximum volume of the whistle. On this modulation, everything.

After the antenna overparagles, my field indicator on one distance from the standard factory springs deviated about 4 times weaker than from alteration the range on past alterations increased by about 2 times. Good luck.

a brief description of

Midland G-5's radio provides free radio at any point of the Earth! They do not need to be registered in the bodies of Rossvyaznadzor. The presence of additional functions is the CTCSS subcodes, voice activation, channel scanning, transmission signal - make the use of a radio station very convenient. In addition, the feeding of the racies is possible both from the batteries that are supplied in the kit and from the batteries.

You do not need to register

Midland G-5's wounds work in the frequency band 446 - 446.1 MHz (this range is also called "PMR", that is, "Private Mobile Radio"), their power during radio signal transmission is 0.5 W. Such registration equipment is not subject to.

Communication always and everywhere

The manufacturer declares the radiocommunication range of 4-5 km. This is in conditions if both waters are used on the street, and there are no obstacles between them. If one radio is located indoors, and the other on the street, the range of communication falls. Also, the range of communication will be less when using waters, for example, in the forest. These radio shows are ideal for communication within buildings. They use the signal range of ultra-screw waves, and such waves have the ability to pass through obstacles. Therefore, with the help of Midland G-5's racies, even interlocutors can talk, one of which is located in the basement of the building, and the other - in the attic or roof! Thus, with the help of these racies, both builders can communicate and, for example, workers, laying or repairing inside the building plumbing, communication lines. Included with radio, batteries and charger are supplied capable of charging two races from the power supply. Instead of batteries, you can use AAA Standard Batteries (Misintsy). The possibility of powering the battery from the batteries is relevant in cases where there is no possibility to charge the radio from the electrical outlet (for example, during the hike).

Use very convenient and simple, there are many useful features

How to use the war, you can describe in several words. Pressed the tangent - say, let go - listen. The tangent is a key on the left side of the radio. When you press it, the transmitter turns on, when releasing the receiver. Everything is simple! In one block with the tanger, the display key turn on the backlight. You can talk on one of the eight channels (the channels differ from each other by the frequency). The main thing is that the channel number you and your interlocutor coincides. It can so happen that the same channel that you also use someone else. Of course, you can go to another channel. But this will not save from situations where the wagons unexpectedly "come to life" by the voices of braceful drivers (this happens, for example, near the highways). There is an exit! You need to install a CTCSS subcode (at Midland G-5 of them 38). He also must be the same in two interlocutors. At the same time, the radio transmits a signal encoded in a certain way, and only a signal with such a code is received, and signals that do not have such code "recognize" outsiders and suppress. It is very little likely that in the zone of evidence of anyone else, besides you and your interlocutor, there may be a walkie-talkie configured on the same channel and reception / transfer of the same subcode as you. Thus, no one will prevent your communication. But your conversation can still hear the owners of the racies configured to the same channel and with no encoding, so I still do not recommend confidential conversations. Voice activation function is very useful. Thanks to her, the radio is included in the "Transmission" mode without pressing the tangent. This mode is very useful in situations when there is no possibility to keep a war in hand (for example, during driving of the car, with sports or industrial climbing). However, in this mode, the radio may be included in the transmission mode and when it is not necessary, it is necessary to keep in mind this circumstance. Still in the radio there is a channel scanning function. In this mode, the radiator is configured to receive the frequency of each channel in turn. If a signal from another radio is received on this channel, the scanning radio remains in the receiving mode of this channel, and you can talk with the winner of which was received. This feature is useful in cases where, for example, any of the people with whom to contact, at the moment something is broadcast, but is unknown on what channel. Thanks to the "Roger Beep" function when the tangents are released and the transition to the ether mode is transmitted a short beep. It replaces the words "ending transmission, reception." The removable clip allows you to wear a war on the belt. If the clip is not used, it can be removed.

An important point after purchasing the Midland G5-R1 device (or even before purchasing it) is to read its maintenance instructions. This must be done about several simple reasons:

to know how to use the device
to know how to maintain / conduct periodic control of the correct operation of the Midland G5-R1 product
to know how to behave in case of an accident Midland G5-R1

If you have not yet bought Midland G5-R1, now is a good moment to familiarize yourself with the basic data concerning the product. First, look at the first page of the instructions that you will find above. You must find the most important technical data of Midland G5-R1 - so you check whether the equipment performs your requirements. Downtown to the following pages of the Midland G5-R1 user manual. You will familiarize yourself with all the available features of the product and information regarding its operation. The information you get about Midland G5-R1 will undoubtedly help you make a decision regarding the purchase.

In a situation, if you are already the owner Midland G5-R1But you have not yet read the instructions, you need to steal it due to the above. Then you will learn whether you used the available features correctly, and did not allow errors that can reduce the Midland G5-R1 operation period.

However, one of the most important roles that the service manual performs for the user is to help solve problems with Midland G5-R1. Almost always you will find there Troubleshooting., the most frequent breakdowns and malfunctions of the Midland G5-R1 device together with the recommendations relating to the methods of their solution. Even if you fail to solve the problem yourself, the instruction will prompt further steps - contact with the Customer Service Center or the nearest service center.

Size: px.

Start showing from page:

Transcript.

1 User Guide Transceiver Radio Midland G5 8 PMR446 Channels

2 Midland G5 Transceiver Radio Station 8 PMR446 Midland G5 Channels This PMR 446 New Generation Radio Station, to use which does not require registration in those European countries, which resolved access to the pan-European Range of PMR446 (MHz). Detailed information on Radiocommunication Rules in the PMR 446 range in Russia can be obtained from your vendors. Main characteristics: MHz frequencies Pitch Frequency mesh: 12.5 kHz

3 8 Channels Power 500 MW ERP Up to 4 5 km ** Power Supplies: AAA Batteries, Rechargeable or Alkaline Alphanumeric LCD Display with Illuminated Vox (Voice Control) 38 CTCSS Tones Battery life up to 35 hours (alkaline batteries ) Operating temperatures from 20 to +55 Weight 63 grams Sizes 53x89x28 mm Nest for audio accessories: 2.5 mm (SPKMIC) Charger socket (CH6) Separate specifications may vary without prior notice. Installing batteries Put the device to the front surface down, pull the cover towards the lower part of the radio station. Then set 3 batteries or accumulator size AAA.

4 Display Illumination Press the button, and the display backlight will turn on about 7 seconds. The display illumination can also be turned on by pressing the L button, when you press this button, the backlight turns off. ** Action range The maximum range is provided when using a radio station in the open space. Limit the maximum zone of action can only external obstacles, such as trees, high buildings and other facilities. When using the device in the car or inside the metal structures of the area of \u200b\u200boperation can also be reduced. Complete set 2 Midland G5 radio stations 2 Clips Wearing on the belt 2 batteries kit 1 Dual connector charger Instructions in Russian let's communicate! Enable / disable a radio station Press the button and hold it for 3 seconds. The device will publish 3 audio signals of different tones (sound signals can be disabled). On the display for 1 second, all icons will appear (self-test - self-test), then the number of the last selected channel will appear on the display. Adjusting the volume with the buttons you can configure the volume to the level you need. Channel selection Press the button once and then use the buttons to select one of 8 channels. To confirm, press the PTT button or simply wait 5 seconds. Channel Frequency RX / TX (MHz) Channel RX / TX Frequency (MHz) Signal transmission mode For the maximum variable voice transmission, hold a radio station to 4-10 cm from your mouth. Press the PTT button and speak to the microphone. During the signal transmission, TX is displayed on the display: when you release the PTT button, the radio station publishes a signal to other users that you have completed the transmission session. (This function is disabled by default, how to enable it - see the section Roger Beep: transmission ending)

5 Signal reception mode simply release the PTT button. In the receiving mode, the RX sign is displayed on the display: Backing Noise Suppression (Squelch). In the Midland G5 radio station, the background noise suppression feature (SQUELCH) is automatically turned on. Mode of automatic energy saving The Midland G5 radio station is equipped with an automatic energy saving system. If the receiver does not receive a signal for 7 seconds and longer, the device automatically switches to energy saving mode. This allows you to increase battery life by 50%. When the charge of batteries or batteries ends, an icon appears on the display. In this case, you need to charge batteries or change alkaline batteries. CHG socket socket for charger. Insert the charger plug into the CHG socket. Use only recommended charging devices to charge the battery. ATTENTION: Do not attempt to recharge alkaline batteries. Keyboard lock Press the SCAN button and hold it a little longer than 3 seconds: the LC icon appears on the display confirming that the buttons are blocked. PTT and L buttons will remain active. Repeat the same actions to remove the keyboard lock. Basic VOX functions: Voice control Enabling the VOX function Press the button three times. In the left top of the display, the flashing inscription VOX will appear, and the inscription of ("OFF") appears on the right of the channel number). Select ON ("On") using the buttons. To confirm the selection, press the PTT button or simply wait 5 seconds. When the VOX function is enabled, you can transmit without using the PTT button: the transmitter will automatically activate when you speak to the microphone of the radio station. Turning off the VOX function

6 Press the button again. In the left top of the display, the flashing inscription Vox will appear, and on the right of the channel number will appear on ("On"). Select from ("Off") using the buttons. To confirm the selection, press the PTT button or simply wait 5 seconds. Roger Beep: transmission end signal When you release the PTT button, the radio station publishes a signal to other users that you have completed the transmission session. This feature is disabled by default. To enable it, follow the following instructions: 1. Press the button 4 times, the display will appear RB of ("Off") 2. Select ON ("ON") using the buttons. 3. To confirm, press the PTT button or the button. 4. The ROGER BEEP function includes the scan function (SCAN) This feature allows you to track busy channels. In the scanning mode, the radio station checks all 8 channels for the presence of a signal and stops on the active channel for about 5 seconds, then the scanning is resumed. Enabling Scan Function: 1. Press the SCAN button: Scanned channels will be displayed on the display. 2. Use the buttons you can skip the channel with strong background noise. Transmission in scanning mode: When you press the PTT button, the radio station will start the transmission on the channel from which the scanning began to stop sending again press the SCAN button again. Configuring CTCSS Midland G5 subtons can receive a signal in two modes: a) Open contact: In this case, you can hear all signals transmitted on the selected channel b) CTCSS Groups: You can receive messages only from users whose radio stations are configured to The same channel and CTCSS code. To activate 1 of 38 CTCSS tones in reception and transmission mode: 1. Turn on the radio station. 2. Select one of 8 channels using the buttons. 3. Press Double-button, the channel number will appear on the display and to the right of it - the flashing CTCSS code. 4. Use the buttons to select the desired CTCSS code.

7 5. To confirm, press the PTT button or wait 5 seconds. Turning off CTCSS Tones If you want to communicate without using CTCSS Codes: 1. Press the channel twice, the channel number will appear on the display and to the right of it - the flashing CTCSS code. 2. Use the buttons to select the Option ("Off").

User Guide Transceiver Radio Station Alan 777 8 Channels PMR446 + 69 Channels LPD Alan 777 Transceiver Radio Station 8 Channels PMR446 + 69 LPD Channels New Radio Station Alan 777 -

TRON-VTM LLC Instructions for operation of the radio station Alan 777 www.tron-vtm.ru. Ekaterinburg 2006 2 Contents Introduction ... 3 1. Specifications..4 2. Basic features and functions ... 5 3.

Midland M24, M48, M99 PTT MIC / CHG Midland M24, M48 and M99 User Guide, M48 and M99 Radio Station, Worked in the PMR 446 Range Congratulations on your purchase! Family of radio stations M24, M48 and M99 working

User Guide Transceiver Midland G7 PMR / LPD radio station radio station. www. Midland G7 PMR / LPD radio station. 1. Introduction We present to your attention a radio station Midland G7 effective

Maxon S1 PMR / LPD radio station. 1. Introduction We present to your attention a radio station Maxon S1 Effective solution for professionals who need to maintain reliable radio communications with colleagues

ROGER RTX Portable low-power LPD radio station KP-11 Operating instruction "Compass + Radio" Moscow 2004 2 Radio station management bodies of a radio station 1. The mode of operation of the radio station. normal

Style Plus Manual Operation Headphones / Microphone Antenna Call PTT Volume Microphone LCD Screen ON / OFF Up / Down Speaker Layout Scheme Main Screen (Figure 1) 1-icon - Normal

Radio station PMR446 G11 R Y K O V O D C T N I WWW.BEZPOMEX.RU MI D L A N D Radio Station PMR446 Midland G11 Thank you for choosing a product brand Midland! Midland G11.

User Guide Transceiver Midland G-225 Radio Site: http://www.midland.ru http://www.midlandradio.com LPD Radio Station, Model G-225 Basic Functional Features

LPD Radio Station GXT600 / 635/650/656 Series User Guide GXT600 / 635/650/656 User Manual Content Introduction 4 Important Notes 5 LCD - Display 6 Control Tools 7 Installation

LPD radio station GXT300 / 325/400 / 450 User Guide 1 GXT300 / 325/400/450 Series Manual Content: Introduction 1 Important Notes, FCC Licensing 2 LCD - Display 2 Control Buttons

LPD radio station GXT300 / 325/400 / 450 User Guide 1 www.midland.ru 2 GXT300 / 325/400/450 Series Content Manual Content: Introduction 1 Important Notes, FCC Licensing 2 LCD - Display

Filing of the orbit T-388 Buy Filing Baqueng.rf Operation Manual Figure 1 Figure 2 Description of the components of the device (Figures 1 and 2) 1. Antenna. 2. Receive icon - is displayed when receiving a signal.

PMR / LPD radio station G7 XT G7 XTR Midland user manual www.midland.ru 1. Introduction Combining advanced technology in radio communications and durable case, Midland G7 XT / G7 XTR radio station is

Midland G70xt user manual RA D and O with TA N C and I P M R / L P D Contents Radio Midland G70XT 1 Complete set 2 Coating area (for PMR radio stations) 3 Main characteristics 4 Safety,

Radio LXT325 User Guide Welcome to Midland Mir! Thank you for choosing Midland products. Your transceiver radio station is a product of modern high

G14 PMR446 / LPD radio station Thank you for choosing Midland brand! G14 Portable radio station that you can freely use in almost all European countries. For getting

Vector VT-44 Military LPD radio station instruction manual. Before starting the radio station, you need to carefully read the present description. Content: Distinctive features ... 2

Intercom (radio station) WT-415 (certificate of compliance of Ukraine UA1.030.0056287-04) Instructions for use Functional features: Introduction -8 channels; -38 CTCSS tones; -scanning

LPD radio station GXT500 / 550/565 User Manual www.midland.ru Series GXT500 / 550/565 User Manual Content Introduction 4-5 LCD - Display 6-7 Control Buttons 8-9 Battery Installation 9-10

MIDLAND GXT850 RA D and O T TA H C and I P M R / L P D Content Radio Midland GXT850 1 Complete set 2 Coverage Area (for PMR Radio Station) 3 Main Characteristics 4 Safety

Model JJ-Connect FreeQuency Micra User Guide www.jj-connect.ru Contents 1. Precautions ... 2 2. Radio control buttons ... 4 6. Antenna ... 4 8. Button up ... 4 9. Button

Radio station Retevis H-777 400 470 MHz Operating Instructions Retevis H-777 - Professional radio station with many functions and features. 5 watts transmitter output power and modern digital

XT10 & XT1 1 & XT30 Deceptible XT10 & XT11 & XT30 Welcome to Midland Welcome! Thank you for preferring Midland products. Your transceiver radio station represents

Vector VT-44H LPD / PMR radio station instruction manual. Thank you for purchasing a radio station vector. We are confident that this quality, easy-to-use radio station will provide you with reliable

Alan 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Contents Introduction ... 1 Radio Station and Location of Controls ... 1 How to use a radio station ... 5 Specifications ... 5

Intercom (radio station) WT-401 (certificate of conformity of Ukraine UA1.030.0056287-04) instruction manual Functional features: -8 channels; -38 CTCSS tones; -FM radio; -scanning

Portable radio station JET! XT User Manual Content Content ................................. 2 Appearance Radio Station ......... ........... 3 LCD Display ................................ 4

Kenwood TK-450S (P) Communication leader Mag77.ru 1. Preparation for work. Installing and charging the battery. Batteries supplied in the kit have a minimum charge or fully discharged (this is due to

Kenwood TK 450 S (3178) 1. Preparation for work. Installing and charging the battery. Batteries supplied in the kit have a minimum charge or fully discharged (this is due to the delivery time

MEGAJET MJ-500 MegaJet MJ-550 MJ-550 MegaJet MJ-555 Radio Operating Instructions MJ-555 2 Figure and Display Authorities. 1. MEGAJET MJ-550 radio station controls 1. Genet microphone 6-pin

Contents Completion ... 2 Warnings ... 2 Specification ... 2 Controls ... 4 LCD Display ... 5 Basic Functions ... 6 Additional Functions ... 10 Operations with Menu ... 16 Channel Programming. ..eighteen

R200 Precautions In case of faults Contact only qualified professionals Do not use the radio station in an explosive environment, in smoke and dusty rooms

Baofeng BF-888S (400 470MHz) Analog Radio Station Baofeng BF-888S Operating Instructions is a professional radio station with a variety of features and features. 5 watts transmitter output power

Baofeng BF-88S 400 470 470 MHz radio station 400 470 MHz is a professional radio station with a variety of features and features. 5 watts transmitter output power and modern

Kenwood KG-UVD1P http: // (always large selection of kenwood portable rates) user manual. BATTERY. The battery supplied in the kit is not charged. Charge it if she is new,

Variable radio station Vostok ST-54 LPD 433,075-434,00625-446,006,00625-446,09375 MHz Vostok instruction manual www.vostok.red vostok vostok Thank you for purchasing a Vostok radio station.

Contents Getting Started .......................................... 3 External type of radio station. ............................... 3 The main modes of the radio station .............. ........ 4 Switching between

Thanks for choosing a Radio station KR-23. Our radio station with an innovative design, thoughtful design and beautiful appearance is a product developed by our company to meet the need.

User Guide Meet the antenna Pen switching channel Power handle / Volume Speaker Audio output Microphone Audio input The light indicator lights up red when receiving green.

Brief instruction for dual-band radio Kenwood Th-F5 Dual battery charging: If the radio shows that the battery is discharged, please charge it. Please use only original,

Vector VT-47 SPORT Radio LPD / PMR Range Operating Instructions. Thank you for purchasing a radio station vector. We are confident that this reliable, easy-to-use radio station will provide

Professional FM Radio Station Racio R100 Operating Instructions Design and Control Organs Antenna Speaker Microphone Switch Channels Switch / Volume Control LED Indicator

User Guide Transceiver Alan Radio Station 516 Manufacturer Website: http://www.midland.ru Alan 516 Specifications and rules of operation Introduction Alan 516 radio station is intended

VT-43R-2 LPD / PMR Range instruction manual Thank you for purchasing a radio station vector. We are confident that this reliable, easy-to-use radio station will provide you with a reliable connection. Radio station

VX-146 Mobile Radio Station User Guide "Compass + Radio" Moscow 2007 2 Congratulations to you! You have become the owner of a valuable product from Vertex Standard - devices for double-sided radio communications.

Portable radio station ROGER KP-23 MOSCOW User Guide "Compass + Radio" Moscow 2006 Thanks for choosing a radio station KR-23. Our radio station with innovative design, thoughtful design and beautiful

1 Yosan JC-2204 Turbo Brief Specifications and Distinctive Features Name Value Frequency Range, MHz 25.615 ~ 28.305 Number of Channels 40 Receiver Sensitivity, MKV (12

Baikal-17 Guide Portable FM Radio Station User Warning: illegal exploitation entails punishment in accordance with applicable law. Maintenance

Midland GB1 User Guide Thank you for preferring Midland products! Midland presents the first income PMR446 radio station. Midland GB1 Compact Radio Station, Equipped

VX-246 Mobile Radio Station User Guide "Compass + Radio" Moscow 2007 2 Congratulations to you! You have become the owner of a valuable product from Vertex Standard - devices for double-sided radio communications.

I approve the Director General of the NPP MRP LLC Denisov S. N. March 21, 2006 VG-304 Radio Station. Manual. Re 6571-002-93546648-2006 Murom content. Content ... 2 Authorities

Vector VT-47 Pilot Radio LPD / PMR Range Operating Instructions. Thank you for purchasing a radio station vector. We are confident that this reliable, easy-to-use radio station will provide

MR 950 Curled low-power radio station User Manual 1 Description of the device buttons ... 2 2 LCD Screen ... 2 3 Preparation for operation ... 3 3.1 Removing the mount ... 3 3.2 Mounting ... 3

WUSB User Manual WUSB Alarm User Manual Characteristics Battery type: 4LR44 / 4A76. Battery voltage: 6V. Standby consumption: 0.006MA. Maximum consumption