SP Flash Tool: flashing Android devices based on Mediatek processors. Firmware of Android devices based on MTK via SP FlashTool Sp flash tool does not see the phone

Can be changed using the SP Flash Tool. It is suitable for Sony Android devices. A modern phone has many different functions. And it's not just calls and SMS messages. With such devices, you can go online, chat, watch videos, find out news, use navigators. Very often operating systems come out with updated options, a more user-friendly interface, and new features. If you want to try them, it will be helpful to know how to flash your phone via Flashtool. To do this, you need a computer.

Firmware needs to be changed if it doesn't work. The device slows down, freezes, turns off without the knowledge of the user, or resets the settings itself, does not open system or installed applications. Of course, problems can be associated with hardware failure of the gadget. But before taking it to a repair service or buying a new one, try downloading the new OS.

Incorrect flashing with flashtool can end badly for the device. Loading Firmware through third-party programs sometimes leads to errors. The same problems arise if you install custom software. These are unofficial programs created by the users themselves. Therefore, switch to a new system if you are sure that it works. If the device is under warranty, neither the manufacturer nor the seller will be responsible for the incorrect downloading of the program.

SP is not compatible with some types of smartphones. It works well with the entire Xperia lineup. Even with older models. But it is absolutely not suitable for Samsung devices - they need the ODIN program to change the OS.

Before reflashing your phone via Flashtool, do the following:

Before downloading Firmware, you need to configure your phone:

Further actions depend on the software version.

Firmware via "classic" FlashTool

Here's how to install the firmware via FlashTool:

Run the program.
In the "Options" menu, select the port (COM Port) to which the phone was previously connected.
The "Download Agent" line will automatically indicate the path to the file with the extension .bin.
Press the "Scatter-loading" button and select the txt file in the directory where the firmware is located. It is usually named "[Device Model] _Android_scatter_emmc.txt".
Turn off your phone. Remove and insert the battery.
Connect it to your computer using a USB cable.
The Firmware download should start automatically.
If this does not happen, disconnect the device from the PC, remove and replace the battery again and try installing the new OS again.
Switch on your phone. The system will not boot immediately.

FlashTool 0.9.x

Unpack the archive containing the firmware (there should be a file in .FTF format) into the / flashtool / firmwares folder. That is, to the root directory of this program.
Run it.
Click on the lightning bolt icon.
Mark the item "Flashmode" with a marker and confirm the action.
The "Sourse Folder" field must contain the path to the Firmware. If it is not there, click on the ellipsis icon and find the directory with the FTF file manually.
On the left there will be a list of software versions. Select the firmware you need.
Click on the Flash button at the bottom.
Tool will begin preparing to download. The information window will say “Preparing files for flashing”.
In a few minutes, the notification "Waiting for Flashmode" will pop up.
Disconnect your phone.
Hold down the volume down button.
Without releasing it, connect the device to the PC.
The Flash Tool will automatically download the Firmware. When the process is completed, "Flashing finished" will appear.

Firmware should only be rearranged as a last resort. Since this may cause various problems and errors. There is a risk that after an unsuccessful installation, the phone cannot be restored.

Do not disconnect the device from the PC during download, do not interrupt it. If the Flash Tool does not install the firmware, it may be due to the drivers or operating system version. Try using a different software.

Creating an FTF file

Firmware files can be turned into an FTF image. This method is for Xperia models. To get software for the device, you need XperiaFirm and Flash Tool 0.9.x.

Find it on the Internet, download and run it.
Select your gadget model from the list on the left.
Click on the "Check All" button at the top. A list of firmwares for all countries and operators will be displayed.
Click on the build number of the Firmware you need.
Versions will appear on the right. Click on one of them.
The Downloader window will open with information about the software. Memorize or write it down. In particular, the lines "Market" and "Release". This will come in handy later.
Check the box "Unpack automatically".
Click Download.
Specify the directory where you want to save the files.

Now you need to act through FlashTool.

Run the program.
If an error appears, delete everything from the Firmwares folder and try again.
Go to Tool - Bundles - Create.
In the "Select source folder" field, click the ellipsis button.
Specify the path to the folder with the firmware. Its files will appear in the list on the left.
Double click on the line next to the word "Device". Select the model of your gadget.
Now you will need the build data you recorded earlier. In the “Branding” field, enter the value from “Market”, in the “Version” field - the values from “Release”.
In the "Folder list" select all files and click on the right arrow icon. They should appear in the "Firmware content" section.
Click on "Create" and wait for the process to finish.
The FTF file will be placed in the Firmwares folder.

With the Flash Tool, you can effortlessly reflash Sony smartphones. But with the wrong approach to installing Firmware, failures and errors can occur. Therefore, this must be done carefully, following the instructions.

FlashTool is a special “flasher” for smartphones running on processors from MediaTek. Thanks to this program, you can reflash your smartphone to a newer version of the operating system or replace your firmware with an assembly of another modification, both official and custom (modified).

1 Installing drivers. Using a microUSB cable, we connect the device to the computer and install the firmware drivers (for example, firmware drivers suitable for most Lenovo smartphones can be downloaded). After the driver is installed, disconnect the device from the computer.

2 Search for the required firmware. On a specialized site dedicated to your device, you need to download the firmware designed to work with the Flash Tool application. Custom or official - you decide. More details about custom and official firmware can be found in the article:

3 Installing the SP FlashTool program. As a rule, for the firmware that are installed on devices using SP FlashTool, this program is included in the kit, in the archive with the firmware. Unpack the archive and launch the application.

4 Device firmware. Turn off the device completely. Run the SP Flash Tool on your computer and fill in the Download Agent and Scatter-loading File fields with the appropriate files.

Without fail put a tick next to “DA DL All With Check Sum”

Click on the "Fimware -> Upgrade" button

The application will go into standby mode for device connection. Using a USB cable, we connect the device to the computer. If everything was done correctly, multi-colored stripes will appear at the bottom of the program, displaying the status of “uploading” the firmware to the device.

Ultimately, a window with a green circle will appear on the computer screen, indicating that the firmware has been successfully uploaded to the device. After that, we reboot the flashed device and enjoy its work.

Attention! The article was written for informational purposes only! Everything that you do is at your own peril and risk.

The MTK hardware platform has become very widespread as the basis for building modern smartphones, tablet computers and other devices. Along with a variety of devices, the opportunity to choose variations of the Android OS came into the life of users - the number of available official and custom firmwares for popular MTK devices can reach several dozen! For manipulating memory sections of Mediatek devices, it is most often used - a powerful and functional tool.

Despite the wide variety of MTK devices, the software installation process through the SP FlashTool application is generally the same and is carried out in several steps. Let's consider them in detail.

All actions for flashing devices using SP FlashTool, including the execution of the instructions below, are carried out by the user at his own peril and risk! The administration of the site and the author of the article are not responsible for a possible violation of the device's performance!

In order for the procedure of writing image files to the memory sections of devices to go smoothly, it is necessary to prepare accordingly, having carried out certain manipulations, both with an Android device and with a PC or laptop.

Installing firmware

Using the SP FlashTool application, you can perform almost all possible operations with the device's memory sections. Installing firmware is the main function and for its implementation the program provides several modes of operation.

Method 1: Download Only

Let's consider in detail the procedure for downloading software to an Android device when using one of the most common and frequently used firmware modes via SP FlashTool - "Download Only".

Run SP FlashTool. The program does not require installation, so to launch it, simply double-click on the file flash_tool.exe located in the application folder.

When you start the program for the first time, an error message window appears. This moment should not bother the user. After the path of the location of the necessary files is indicated to the program, the error will no longer appear. Push the button "OK".

In the main window of the program, after starting, the operating mode is initially selected - "Download Only"... It should be noted right away that this solution is used in most situations and is the main one for almost all stitching procedures. The differences in operation when using the other two modes will be described below. In the general case, we leave "Download Only" without changes.

We proceed to adding image files to the program for their further recording into the memory sections of the device. For some automation of the process, SP FlashTool uses a special file called Scatter... This file is essentially a list of all sections of the device's flash memory, as well as the addresses of the initial and final memory blocks of the Android device for recording the sections. To add a scatter file to the application, press the button "Choose" located to the right of the field.

After clicking on the button for selecting the scatter file, the Explorer window opens, in which you need to specify the path to the required data. The scatter file is located in the folder with the unpacked firmware and is named MT xxxx _Android_scatter_ yyyyy.txt where xxxx- the model number of the processor of the device for which the data loaded into the device is intended, and - yyyyy, the type of memory used in the device. Select the scatter and press the button "Open".

It is important to note that the SP FlashTool application provides for a hash check, designed to protect the Android device from writing incorrect or damaged files. When a scatter file is added to the program, the image files are checked, the list of which is contained in the downloaded scatter. This procedure can be canceled during the verification process or disabled in the settings, but this is strongly discouraged!

After downloading the scatter file, the firmware components were added in automatic mode. This is evidenced by the completed fields "Name", "Begin Adress", "End Address", "Location"... The lines under the headings contain, respectively, the name of each section, the starting and ending addresses of the memory blocks for recording data, as well as the path where the image files are located on the PC disk.

To the left of the names of the memory sections are check-boxes that allow you to exclude or add certain image files that will be written to the device.

In general, it is strongly recommended to uncheck the box next to the item with the section "PRELOADER", this allows you to avoid many problems, especially when using custom firmware or files obtained from dubious resources, as well as the absence of a full system backup created with.

Checking the program settings. Push the menu "Options" and in the window that opens, go to the section "Download"... Checking the items "USB Checksum" and "Storage Сhecksum"- this will allow you to check the checksums of files before writing to the device, and therefore avoid flashing corrupted images.

After completing the above steps, we proceed directly to the procedure for writing image files to the corresponding sections of the device's memory. We check that the device is disconnected from the computer, turn off the Android device completely, remove and insert the battery back, if it is removable. To put SP FlashTool into standby mode for connecting the device for firmware, press the button "Download" indicated by a green arrow pointing down.

While waiting for the device to connect, the program does not provide an opportunity to perform any actions. Only the button is available "Stop", allowing you to interrupt the procedure. We connect the switched off device to the USB port.

After connecting the device to the PC and determining it in the system, the process of flashing the device will begin, accompanied by the completion of the progress bar located at the bottom of the window.

During the procedure, the indicator changes its color depending on the actions performed by the program. For a complete understanding of the processes occurring during the firmware, consider the decoding of the indicator colors:

After the program completes all the manipulations, a window appears "Download OK" confirming the successful completion of the process. Disconnect the device from the PC and start it by long pressing the key "Food"... Usually, the first launch of Android after the firmware takes a long time, you should be patient.

Method 2: Firmware Upgrade

The procedure for working with MTK-devices running Android in the mode Firmware Upgrade generally similar to the above method "Download Only" and requires similar actions from the user.

The difference between the modes is the impossibility of selecting individual images for recording in the option Firmware Upgrade... In other words, in this version, the device memory will be overwritten in full accordance with the list of partitions contained in the scatter file.

In most cases, this mode is used to update the official firmware as a whole working device, if the user needs a new software version, and other update methods do not work or are not applicable. It can also be used when restoring devices after a system crash and in some other cases.

Attention! Using the mode Firmware Upgrade assumes a complete formatting of the device's memory, therefore, all user data in the process will be destroyed!

The firmware process in the mode Firmware Upgrade after pressing the button "Download" in SP FlashTool and connecting the device to a PC consists of the following steps:

Creating a backup copy of the NVRAM partition;
Full formatting of the device's memory;
Device Memory Partition Table (PMT) entry;
Restoring NVRAM partition from backup;
Writing all sections, image files of which are contained in the firmware.

User actions for carrying out the firmware in the mode Firmware Upgrade, repeat the previous method, except for certain points.

Method 3: Format All + Download

Mode "Format All + Download" in SP FlashTool is designed to perform firmware when restoring devices, and is also used in situations where the other methods described above are not applicable or do not work.

Situations in which it is applied "Format All + Download", are diverse. As an example, we can consider the case when a modified software was installed in the device and / or the device memory was re-partitioned to a solution different from the factory one, and then it was necessary to switch to the original software from the manufacturer. In this case, attempts to write the original files will fail and the SP FlashTool program will offer to use the emergency mode in the corresponding message window.

There are only three stages of firmware execution in this mode:

Full formatting of the device's memory;
PMT Partition Table entry;
Writing all sections of the device's memory.

Attention! When manipulating in the mode "Format All + Download" the NVRAM section is erased, which leads to the deletion of network parameters, in particular, IMEI. This will make it impossible to make calls and connect to Wi-Fi networks after following the instructions below! Restoring the NVRAM partition in the absence of a backup is quite time-consuming, although possible in most cases procedure!

Steps required for formatting and writing partitions in "Format All + Download" are similar to those in the above methods for modes "Download" and Firmware Upgrade.

Installing custom recovery via SP Flash Tool

To date, the so-called custom firmwares are widespread, i.e. solutions created not by the manufacturer of a specific device, but by third-party developers or ordinary users. Without delving into the advantages and disadvantages of this method to change and expand the functionality of the Android device, it is worth noting that in order to install custom, in most cases, a modified recovery environment is required in the device - either. This component of the system can be installed in almost all MTK devices using SP FlashTool.

It is worth noting that the considered method of installing recovery via SP FlashTool does not pretend to be an absolutely universal solution. In some cases, when loading the image of the recovery environment into the device, additional actions may be required, in particular, editing the scatter file and other manipulations.

As you can see, the process of flashing MTK devices on Android using the SP Flash Tool application is not a complicated procedure, but it requires proper preparation and balanced actions. We do everything calmly and think over every step - success is guaranteed!

The SP FlashTool firmware program is used to restore and update the operating system on devices based on MTK processors. And only for them. It is good that most manufacturers have such models in their arsenal. This means that the program is relevant in any case. There is no single and universal instruction on how to flash devices through FlashTool. It all depends on the manufacturer of the smartphone. In some devices, everything is as easy as shelling pears, while other devices will have to be prepared for the procedure.

You can download this program anywhere. But it's better on the official website of the developer. The utility is constantly updated and supports an increasing number of devices. Now it can be successfully applied to smartphones and tablets. About that, through FlashTool, and will be discussed further.

A little about the program

The SP FlashTool application is deservedly popular among those who like to experiment on their smartphones. It can be used to replace the firmware on devices with MTK processors. However, the program can do more than that. It can be used to test the memory, partitions, hardware of the smartphone. In the right hands, it really is a powerful diagnostic tool. And in combination with the programmer, this application is not worth the price.

Of course, the flashing process is different for different devices. There are hassle-free devices. But there are those that can "take out the brain" to the user during the procedure. If you need a 100% positive result, then it is better to familiarize yourself with the firmware process for a particular model separately. How to flash Fly via FlashTool? In general, the same as the models of other manufacturers. After all, below we will talk about a universal option that is suitable for almost any device.

Stage 1. Installing drivers

In order for the program to detect the device, you need to install the drivers. This is the first and most important step. Without this, the firmware will fail. Usually, the standard drivers supplied with the device are enough. But in some cases you will have to rummage around on specialized forums for firmware.

The fact is that some smartphones require a special driver for flashing. Without it, nothing will come of it. Finding it is easy - just go to a search engine. It is best to open Device Manager to track the driver installation process. If at the end of the installation there are no devices marked with a yellow question mark, then everything is fine. But this is only the first step. How to flash the phone via FlashTool next? It's simple. Now you need to select the correct firmware. More on this below.

Stage 2. Firmware selection

On the Internet, there is a huge variety of different firmware for your device. Hence the problem of choosing the right one. It should be immediately noted that it is necessary to avoid "self-made" assemblies from unknown manufacturers. These are the so-called Perhaps they are faster than the factory ones in terms of performance, but they do not differ in stability.

So, we are looking for the firmware from the manufacturer. But here too you need to be careful. Alpha and beta versions should be strictly avoided. When using them, you can get a brick. The best solution would be a factory version labeled stable. After the firmware is selected, you need to download it and unpack the folder with it to the root of the disk. This completes the preparation process. Now let's move on to the next item. via FlashTool, we almost know already.

Stage 3. Preparation of the program

Run Flash_Tool.exe. After that, the working window of the program appears. Depending on the degree of "kill" of the device, you can select different modes of firmware. Let's assume that our smartphone is more alive than all living things. You just need to change the firmware. In this case, you do not need to change any program settings.

In the upper right corner, press the Scatter-Loading button and find the folder with the unpacked firmware. Here you need to find the MT65xx_Android_scatter.txt file. Where xx is the processor end digits of your device model. Then the download of the files necessary for the firmware will begin. If your PC is powerful enough, it won't take much time. After successful download, it remains to click the Download button. The program is now in standby mode. She is waiting for the connection of the smartphone. It's time to move on to the next stage. devices when the program is already prepared?

Stage 4. Firmware of the device

Much depends on the smartphone model. If the device has a removable battery, then you need to turn off the phone, remove and insert the battery back, connect the device to the computer (switched off). If the battery is not removable, then you just need to turn off the device. Then we connect it to the USB cable. In any case, you only need to connect the switched off smartphone. If your device is a brick, then it is difficult to make a mistake. It is already off all the time.

After connecting, the program will detect the device and start the firmware process. It can take a very long time. It depends on the degree of "killed" the device and the power of your computer. In any case, at the end of the firmware, you will see a green ring. This means that all operations have been completed successfully. That's all. You can disconnect your smartphone from your computer and try to turn it on. This sequence of steps clearly describes what is through FlashTool. The program is suitable for most phones.

Features of various devices

In some cases, the standard settings of the program for flashing a smartphone from one manufacturer or another are not enough. Here you have to dig deeper into the settings. And since the program is in English, some difficulties may arise. In any case, for the correct firmware of "problem" devices, you will need to consult a specialist. Ask him how to flash a Sony Xperia via FlashTool, and you will hear a description of the required process.

In the case of the "purebred Chinese", things are even more complicated. Most likely, you will have to re-solder the USB cable to make it usable for firmware. The only good thing is that there are very few such devices based on MTK. And the risk of running into them is small. In addition, they rarely use the Android OS. Most often they have their own system of unknown origin. This, of course, doesn't make it any easier. But the question of whether through FlashTool disappears by itself. Since the program is simply not suitable for these devices.

As for gadgets from Sony, they are generally extremely reluctant to agree to flash. The bootloader of these machines is locked for security reasons. On the one hand, this is good, since it protects the device from the encroachments of comrades with "crooked hands". On the other hand, this is an additional hemorrhoid when restoring the firmware. So before you start working with such smartphones, it is better to ask the professionals how to flash Sony through FlashTool.

Conclusion

These are just general instructions. Now you have an idea of how to flash gadgets through FlashTool. For more accurate and detailed information, it is better to turn to the rich reference apparatus. But this article will also help you get acquainted with the basic techniques of working with the program. In most cases, this will be sufficient.

FlashTool is a powerful tool for flashing smartphones based on the MediaTek chipset. With this application, you can either install a newer version of the operating system on your device, or even replace it with a custom one (modified by third-party developers).

However, this whole process is accompanied by a certain risk, and one wrong action can lead to the fact that your smartphone will turn into a useless "brick". To prevent this from happening, carefully read this article. From it you will learn how to flash through FlashTool correctly and not risk your phone in vain.

Determine the processor model

As mentioned earlier, FlashTool only works with MediaTek devices. In view of this feature, it is important to make sure that your smartphone is equipped with the processor of this manufacturer, otherwise the firmware program may not interact with it correctly. This, in turn, is fraught with serious consequences.

To determine the processor model, you need a special application - CPU-Z. It can be downloaded for free from the Play Market, so this process should not give you any trouble. After you download and install the program, do the following:

Run CPU-Z on your smartphone.
Wait a few minutes while the program collects information about the device.
Go to the SOC tab and pay attention to the very top line. This is where your processor model will be displayed.

If the above line says MediaTek, then your smartphone is suitable for working with the program. But still, before flashing through FlashTool, you need to perform a few more important steps. They will be discussed below.

Preparation

It is important to know that flashing your smartphone will cause it to revert to its factory settings. In other words, all information stored on the device will be deleted and cannot be recovered. To prevent this from becoming a nuisance to you, do the following:

Save all contacts from the phone book. They can be transferred to a computer using special programs or synchronized with your Google account.
Copy all important photos, documents and videos to your computer.
Check if there is any important information left in the SMS (passwords from payment systems, bank codes, etc.). If there is one, then it is better to rewrite it.
Check the calendar for significant dates.
If you still have the installation files of some rare programs, you can copy them to your computer before flashing through FlashTool.

Do not neglect these simple tips, because they will help you save time and hassle. It is better to go through all the points several times, and only after that proceed with the firmware.

Setting up the operating system

Before flashing Android via FlashTool, you need to set some operating system settings. The fact is that Windows does not quite adequately perceive smartphone drivers, so it is necessary to cancel the verification of digital signatures. This is done like this:

Start Command Prompt (Admin).
Write the gpedit.msc command for a 32-bit OS or C: \ Windows \ SysWOW64 \ gpedit.msc for a 64-bit OS. Hit Enter.
The "Group Policy Editor" will open in front of you. Here you need to select "User Configuration", then "Administrative Templates", and then "System".
Now click "Install Driver", and then select "Digital Signature".
In the window that opens, select the "Disable" item.
Click "OK" and confirm the changes made.

Now the operating system will not “swear” at the smartphone driver, and the firmware program will be able to work normally.

Installing smartphone drivers

At this stage, you need to download and install a driver for your device, which will allow it to interact normally with your computer. You should look for it in such places:

First of all, you need to look for the driver on the website of the manufacturer of your device. This way you can be sure not to catch a computer virus.
Sometimes the driver can be found on the disc that comes with some phone models. If so, then you need to insert the CD into your computer's drive and follow the prompts.
In the event that the above two methods do not suit you, you can look for the driver on the thematic forums. Keep in mind that in this way you risk the security of not only your phone, but also your computer. Therefore, be sure to check all downloaded files for viruses before installing them.

After you find the driver, download and install it. This is done by double clicking on the archive and should not cause any difficulties. But sometimes problems do arise, so such cases should be given special attention.

Problems installing drivers

It often happens that the driver does not want to be installed in any one. In fact, there is nothing wrong with that, and the problem is solved quite simply. Namely:

Disconnect the data cable from the computer and phone.
Turn off your smartphone and remove the battery from it. The memory card and SIM card can be left on.
Open "Device Manager" on your PC.
Place the driver files wherever you like.
Without inserting a battery, connect your phone to your computer and get ready.
For just a few seconds, a new device will appear in the manager. You need to have time to click on it with the right mouse button and select the line "Update driver".
Now just specify the path to the driver files and wait for the installation process to finish.

If you did not manage to update the phone driver in time and the device disappeared from the manager, you need to repeat the whole procedure again, starting from point 5.

Search for firmware

Now is the time to find and download the firmware that you will install on your smartphone. Here you have two options: use the official software or custom. In the first case, just go to the website of the phone manufacturer and find the latest update for your model. But if you decide to use custom firmware, then you should follow a few simple rules:

Make sure the selected firmware is suitable for your smartphone model. Failure to comply with this condition is fraught with serious problems, up to the transformation of the phone into a "dead" piece of plastic.
Only download files from reputable sites and forums. In this case, even if there is a problem, you can count on the help of software developers.
Carefully study the reviews of the firmware provided by other users. Better not to take risks if there are many negative ones among them.
Make sure that the smartphone firmware you have installed is older than the one you are about to download.

Remember, following these simple rules, you will save your phone from unnecessary breakdowns.

Making a backup

Most users have no problem flashing and the whole process goes smoothly. But it is still better to prepare in advance for unforeseen situations, because no one is immune from them. To do this, you need to create a backup copy of the system files of the smartphone before flashing through FlashTool. For this:

Connect your phone to your computer.
Select the read speed.
Specify the type of reading NOR.
Go to the Read back tab and click Add. Create a backup file by giving it any name. Then click Save.
You will see a window in which you should specify the size of the read data in the Length field. First, try entering the value 0x01000000, and if it does not work, then 0x02000000.
Unplug your phone from the cable and unplug it. Take out the battery, insert it back, and then reconnect the smartphone to the data cable (not including).
Press and immediately release the smartphone's power button.

If you did everything correctly, the backup process will begin. Be sure to wait until it ends.

Device firmware

If you have thought everything over and prepared, then you have no choice but to flash through FlashTool. The instructions for this procedure, in fact, are not so complicated, and it looks like this:

Launch FalshTool and click Scatter-loading.
Specify the path to the MTxxxx_Android_scatter_emmc.txt file (instead of "xxxx" there will be numbers corresponding to the processor model of your device). Click "Open".
Be sure to check the box DA DL All With Check Sum. Otherwise, you risk "killing" your smartphone.
Press the Firmware-Upgrade button and connect the switched off phone.
Multi-colored download bars will appear at the bottom of the main menu of the program.
As soon as the firmware process is completed, a green circle will appear on the screen, notifying of a successful operation.

Now you can disconnect your smartphone from the data cable and use it. Keep in mind that it can take a long time to turn on your phone for the first time, so don't worry if you have this situation.

By the way, if you do not know through FlashTool, then you can use the same instructions. It is equally valid for all Android devices.

Flashing Chinese phones

How to flash a Chinese phone via FlashTool? It is also possible to do this, but this procedure is somewhat different from the standard one; it will be considered separately. It is important to know the following here:

Never press the Memory Test button in FlashTool. For some reason, Chinese phones do not adequately respond to this operation, and it may happen that the firmware will be erased beyond recovery.
Carefully study the information about the firmware on the site from which you download it. It is possible that it contains bugs that can cause you serious problems.
Do not try to install the firmware on your smartphone from another device. So you run the risk of ruining it, and it is not a fact that you will be able to return the phone to working condition.

Also, if you are not confident in your abilities, it is better to contact the nearest service center. Chinese smartphones are very specific, so let the specialists deal with them.

Actions after firmware

After the flashing of your phone is completed, you need to perform a few more simple steps:

Do not forget to set the current time and date.
Link your device to your Google account. This is especially useful if you've synced your phone book with it.
It will be better if you format the memory card. System files from the previous firmware may remain on it, which do nothing useful, but only take up free space.

That's basically it. Now you can enjoy the new firmware that will surely make your smartphone work in a new way.