Contacts

IE cannot display a page. Internet Explorer cannot display the web page - contour. Experience. Safe connection failed

Why it happens that some sites on the computer are opened, and others are not? Moreover, the same site can open in Opera, and in Internet Explorer, an attempt will be unsuccessful.

Basically, such problems arise with sites that work on the HTTPS protocol. Today it will be discussed, why Internet Explorer does not open these sites.

Proper time setting and dates on your computer

The fact is that the HTTPS protocol is protected, and if you have incorrect time or date in the settings, it will not work for such a site in most cases. By the way, one of the reasons for such a problem is the served battery on motherboard Computer or laptop. The only solution in this case is its replacement. The rest corrected much easier.

You can change the date and time in the lower right corner of the desktop, under the watch.

Overload devices

If everything is fine with the date, then we try to overload the computer alternately, the router. If you do not help connect the Internet cable directly to the computer. This can be understood in which area to look for the problem.

Site availability check

We try to go to the site through other browsers and if everything is in order, then go to the Internet Explorer settings.

Go to B. "Service - Browser Properties". Tab "Additionally". Check the presence of ticks in points SSL 2.0., SSL 3.0., TLS 1.1., TLS 1.2., TLS 1.0.. In the absence, we celebrate and overload the browser.

Reset all settings

If the problem has not disappeared, we go again in "Control panel - browser properties" And do "Reset" All settings.

Check computer for viruses

Very often, various viruses can block access to sites. Spend a complete check installed antivirus. I have NOD 32, so I show it.

For reliability, you can attract additional utilities for example AVZ or ADWCleaner.

By the way, the necessary site can block the antivirus itself, if he sees a safety threat in it. Usually, when you try to open such a website, a blocking message is displayed on the screen. If the problem was in this, then the antivirus can be turned off, but only if they are confident in the safety of the resource. Maybe not in vain blocks.

If no method helps, then the computer files were damaged. You can try to roll back the system to the last saved state (if such saving was) or reinstall operating system. When I ran into a similar problem, I was helped with a reset of settings.

Internet Explorer: General How to set up several rows of selected sites in IE9

When creating a new tab (About: Tabs), two rows of sites are displayed in IE9. You can change this behavior if in the section HKCU \\ Software \\ Microsoft \\ Internet Explorer \\ TabbedBrowsing \\ NewTabpage You will specify a new value for the DWORD NUMROWS parameter, which is responsible for the number of rows. To change the changes, you need to restart the browser.

Full screen

To enable mode Full screen, You need to press the F11 key. If you want IE9 to start in such a default mode, then in the Assign FullScreen parameter section Yes. To switch to normal mode, you can still use the F11 key.

Internet Explorer (without settings)

If you run Internet Explorer 8 in mode Without settings (Start → All Programs → Standard → Service → Internet Explorer (without settings), the browser opens a special page about: Noadd-Onswhere information is displayed that all add-ons are disabled. Using the registry, you can change this page. In chapter HKLM \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main Find the EXTENSIONS OFF Page parameter, which contains value about: Noadd-Ons. You can ask your homepage, for example, http://user.alexanderklimov.ru. or empty page - about: Blank..

Scaling pages

Starting with IE7, the browser has the ability to scale pages using Ctrl + mouse wheel (or Ctrl + and Ctrl -) or with a magnifying glass in the status bar. You can disable the page scaling if in the section HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Zoom Create a zoomdisabled DWORD parameter with value 1.

Disable page scaling function


Browser Selection Window Lock

In European windows versions A browser selection window appeared, where there are random links to several popular browsers. In the corporate environment, such a window is superfluous, and administrators can disable this selection window, if in the HKLM \\ Software \\ BrowSerchoice section, the DWORD Enable parameter will assign a value of 0 (defaults 1 - Show the selection window).

Version of Internet Explorer.

HKLM \\ SOFTWARE \\ Microsoft \\ Internet Explorer

General Settings IE7 / IE8

IE7 browser parameters are in branches HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ TabbedBrowsing. All parameters have DWORD type

  • Enabled - allows bookmarks ( multi-plate mode): 0 \u003d off / 1 \u003d enabled
  • WarnonClose - notifies the user when trying to close the browser, that all tabs will also be closed: 0 \u003d not to notify / 1 \u003d notify
  • OpenInforeGround - Determines whether to transfer to a bookmark when it is created, or not: 0 \u003d Disabled / 1 \u003d enabled
  • QuickTabShreshold - Determines whether the page sketch view will be available (Ctrl + Q): 0 \u003d Disabled / 2 \u003d Included
  • OpenALhomepages - if you have a few start PagesEach of which opens in the new bookmark when starting the browser, determines whether the loading of the remaining villages is allowed or only the first: 0 \u003d Open only the first page / 1 \u003d opens all pages
  • Openadjacent - determines whether it will be created new page followed by the current bookmark: 0 \u003d disabled / 1 \u003d enabled
  • UsehomePageFornewTab - allows the administrator to set the default page for the newly created bookmarks: 0 \u003d Blank Page / 1 \u003d Homepage
  • Popupsusenewwindow - determines that IE should do when a pop-up window is met: 0 \u003d allow IE to decide / 1 \u003d open in a new browser window / 2 \u003d open on a new bookmark
  • Shortcutbehavior - Determines how IE must open the URL of addresses from other applications: 0 \u003d in a new window / 1 \u003d on the new bookmark in the current Browser window / 2 \u003d Current tab / window
Menu

Starting with IE7, the default browser does not display the menu string. If you want the menu string to be in the browser constantly at the very top, then in section

HKCU \\ Software \\ Microsoft \\ Internet Explorer \\ Toolbar \\ WebBrowser

create a type parameter DWord. Itbar7position with a value 1. Restart the browser to change the changes to take effect.

In IE8, the menu bar, if you enable it in the settings of the toolbar, is located between the field to enter addresses and the tabs. Someone such a scheme for the location of the elements may seem uncomfortable and want to move the menu bar to the familiar position, that is, put it exactly under the heading of the browser window. Standard tools to move the menu bar will fail. To do this, use the parameter mentioned above.

Policy: Computer Configuration (User Configuration) → Administrative Templates → Windows Components → Internet Explorer → Move the menu string above the navigation panel


Exception of IE8 from Windows Update

If you need to block automatic deployment of the program through windows service Update, then in the section HKLM \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Setup \\ 8.0 Create a Donotallowie80 parameter with a value equal to one.


Setting the search services in IE8

An updated instant search panel appeared in IE8, the capabilities of which can be expanded by connecting to the browser network Services. In the program manager's manager window, you can change the procedure for displaying the search services and disconnect them, but cannot be changed by the URLs attached. To adjust addresses you need in the section HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ SearchSCopes Change the corresponding parameters. Thus, for example, you can teach Wikipedia add-in to search for the Russian-language section "Wikipedia" (by default, it is looking for encyclopedic materials in English).

To change the HTML code viewing program in IE8, you need to HKLM \\ SOFTWARE \\ Microsoft \\ Internet Explorer Create subsection View Source Editorin which to create another subsection Editor Name. And in the default parameter to register Notepad.exe..

If you want to use another editor, then push the full path to the executable file of your editor.

The same result can be achieved without resorting to the help of the registry. See the Council HTML Code Viewer (IE8) in the directory Folk Tips.Windows

Here are the settings that are available from the Observer Properties menu-optional menu. It is recommended to change the values \u200b\u200bthrough this window to normal users. These examples are intended only for programmers. All parameters are entered into the section


Settings Wizard Connection to the Internet

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Connection Wizard

The program for viewing HTML code

In chapter HKCU \\ Software \\ Microsoft \\ Internet Explorer \\ Default Html Editor Stores program information to view and edit HTML-code

Pages for ABOUT.

In IE, there are several pages that can be opened through the command. about

  • about: Blank - Displays an empty page
  • about: SecurityRisk.
  • about: Noadd-Ons
  • about: Tabs.

You yourself can create such an address, or change the page referenced by the standard address.
All addresses that start with the word about: are stored in the parameters of the section of the section HKLM \\ Software \\ Microsoft \\ Internet Explorer \\ ABOUTURLS. The values \u200b\u200bof these parameters determine the pages that these addresses are displayed. The names of the parameters correspond to the string that you need to add to the About line: for the formation of the final address. Built-in commands are usually sewn into library resources.

Lines for combo kobox address

When you click on the triangle in the Combobox, the address drops the list of addresses you enter.

You can edit this list (add, delete, change). Enter the section:

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ TypeDurls

There is a list of your addresses, starting with the URL string parameter. Add or delete lines, but make sure that the parameters are ordered. Otherwise, if you have URL1, URL2, URL5, URL6, then only the first two addresses will be displayed.

Note: This list will appear if the web address is located in the Combobox. If there is the path to the file on the local computer, the list similar to the conductor list appears.

Cancel Password Caching (Internet Explorer 4 and Above)

According to some information, this setting has limited use. This information refers to the Internet Explorer version 4.01 With the 2nd service pack installed, to 5 and 5.01 versions of Internet Explorer, running under Windows 95, 98, NT 4.0 and Internet Explorer 5.01 for Windows 98 Second Edition. For example, when conducting tests under Windows ME, Internet Explorer 5.5 ignored this setting.

To disable password caching, use the type parameter DWord. DisablePasswordCaching with value 1 in section
. By default, password caching is involved in Internet Explorer.

Microsoft dedicated this issue by article Q229940 in MSDN called "How to Disable Internet Explorer Password Caching".

Internet Explorer cannot display this web page

When viewing a website using Internet Explorer 8, the following error message appears:
Internet Explorer cannot display this web page.
One of the reasons can be the use of two IPv4 and IPv6 protocols.
You can solve this problem by editing the registry, increasing the number of connections to the server.
Changes are entered in the following sections.
For x86 computers:


For x64 computers (32-bit IE)
HKCU \\ Software \\ Wow6432Node \\ Microsoft \\ Windows \\ Currentversion \\ Internet Settings
For x64 computers (64-bit IE)
HKCU \\ SOFTWARE \\ Microsoft \\ Windows \\ Currentversion \\ Internet Settings

You must create in the specified sections the DWORD ConnectRetries parameter and assign it a value of 10.
After making changes, you must restart Internet Explorer
It is also recommended to read the article where other ways to solve the problem are described - an error message in Internet Explorer browser: "Internet Explorer cannot display this webpage"
Ban on download files

To prevent the user to upload files from the Internet, create a type parameter DWord. NoselectdownLoaddir with value 1 in section

You can block the file download option in the browser as follows. In chapter \\ Zones \\ 3 Change the value of the DWORD parameter 1803 from 0 to 3.
After the changes made by Internet Explorer will prevent any user attempt to download any file from the Internet.

Errors when downloading a page

By default, IE, if errors occur 4 ** shows pages with a detailed description of the corresponding error and further recommendations. To prevent the display of such pages, you need to change the value of the FRIENDLY HTTP Errors string parameter with the value no. In chapter

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main

In this case, empty pages will be displayed.

F3 key (search)
You can block the F3 key in Internet Explorer, which starts searching on the Internet. Create a type parameter DWord. NOFINDFILES with value 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

Favorites
Removing the menu item in IE

To delete the menu item Favorites In Internet Explorer, create a type parameter DWord. NOFAVORITES with value 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

Button Favorites will also be unavailable on the toolbar
Open in a new window

HKCR \\ InternetShortcut \\ Shell

create new section Open in new windowin which create a subsection command.. In the created subsection, change the default value to rundll32.exe SHDOCVW.DLL, OpenURL% 1. Now in the context menu of the links in the Favorites will appear a new command, which allows you to open a link in a new window.

Greeting window I. initial settings IE8.
When you first start Internet Explorer 8, the user sees the welcome and search and accelerator settings window. After the setup, a new tab opens, in which the Special Page is downloaded from the Microsoft website. There are several ways to disable these operations.
Method first (for each user)

This method is valid for a separate user, so if necessary, you need to do the described operations with each user.
The section needs to create multiple keys:

  • IE8RunoncelastShown with value 1 (DWORD)
  • Ie8RunonceperInstallCompleted with value 1 (DWORD)
  • IE8RUNONCECOMPLTIONTime (Empty) (Binary)
  • IE8TOURSHOWN with value 1 (DWORD)
  • IE8TOURSHOWNTime (Empty) (Binary)
  • IE8RunoncelastShown_TimeStamp (Empty) (Binary)
Method of the second

In the Create DWORD DISABLEFIRNCUSTOMIZE type option. It can take the following values: 1 (home page will be downloaded), 2 (welcome page will be downloaded).

Policy: Computer Configuration (User Configuration) → Administrative Templates → Windows Components → Internet Explorer → Disable the execution of the parameters "Configure the first launch"

Buttons back and forth
To block buttons Forward and back to Internet Explorer, create a type parameter DWord. Nonavbuttons with value 1 in section
View menu
View HTML codeTo block the menu item View HTML code Use the type parameter DWord. NoviewSource with value equal to 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS


Selecting a text editor to view the HTML code

By default, a standard notepad is used to view the HTML code. You can use your favorite text editorUsing in the section

HKLM \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ View Source Editor \\ Editor Name

string parameter (Default)in which you need to register the full path to the EXE file text editor
Full screen

When choosing View-full screen (or F11) Internet Explorer goes into the so-called kiosk mode. To ban such an opportunity, use the type parameter DWord. Notheatermode with value equal to 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

reference
All settings are made in the section

HKCU \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Internet Explorer

with help DWord.-Paramers
Blocking point certificate

To block item reference Create NohelpMenu parameter with a value equal to 1
For NetScape users

To hide subparagraph For NetScape users In the Help menu, create nohelpitemnetscapehelp parameter with a value equal to 1
Comments and suggestions

To hide subparagraph Comments and suggestions In the Help menu, create a NohelpitemsendFeedBack parameter with a value equal to 1
Helpful advice

To hide subparagraph Helpful advice In the Help menu, create nohelpitemtipoftheday parameter with a value equal to 1.

Image Toolbar
Disable image toolbarIn Internet Explorer, when you hover the mouse in the picture you want to save, the image toolbar appears in the picture corner.

This panel allows you to quickly carry out different operations: Save, print, send by mail, open the folder my drawings

To disable this image toolbar, create a type key DWord. Mypics_hoverBar in the section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ PhotoSupport

with value 1.

There is still an alternative. Create a string parameter enable_mypics_hoverbar in the section

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main

and assign importance yes (enable) or no. (turn off)
Size pictures

The image toolbar appears not for all drawings. To use the toolbar, the size of the figure should be at least 130 x 130 pixels. If you want to change this value, then create a parameter DWord. Image_filter in the section

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main

and assign it the desired value
Display panel relative to the image

By default, the image toolbar appears shifted by 10 pixels from the upper and left sides of the image. To change this setting, create a parameter DWord. Offset in the section

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main

and give it the desired meaning.

Buttons on the toolbar in Internet Explorer

If your browser's toolbar contains too many unnecessary buttons, find the section: HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Extensions. This section contains subsections that you can delete, change, edit
Unnecessary buttons may be invisible, but attend the toolbar. To view all existing buttons, right-click on the toolbar and select Settings

Context menu in Internet Explorer
Excess commands in the context menuIf the context menu of your browser dropping, if you press the right mouse button on the link, contains too many unnecessary commands, then find the section

HKCU \\ Software \\ Microsoft \\ Internet Explorer \\ Menuext.

This section contains subsections that you can delete, change, edit
Ban on the context menu

To prevent the context menu call the right mouse button, use the type parameter DWord. NobrowSerContextMenu with value 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS


Open in new window

To block the option opening a page in a new window, when you press the right button on the link and select item Open in new window Use the type parameter DWord. NoopeninNewwND with value 1 in section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

Menu
Show menus in Internet Explorer

By default, in Internet Explorer 8/9, the menu bar is not displayed to increase the useful space on the screen. If you prefer that the menu is always displayed on the screen, add in the section HKCU \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Internet Explorer \\ Main DWORD ALWAYSSSHOWMENUS

Policy: Computer Configuration (User Configuration) → Administrative Templates → Windows Components → Internet Explorer → Enable the default menu panel


Deleting the menu item File from Internet Explorer

To delete the menu item File of Internet Explorer. Use the parameter DWord. NofileMenu with value 1 in section

HKCU \\ Software \\ Microsoft \\ Windows \\ Currentversion \\ Policies \\ Explorer


This item will also be removed from the window. Explorer, My documents and other places using the Windows shell Ban on creating a new window

When choosing File new window (or Ctrl-N.) A new window is created. To ban such an opportunity, use the type parameter DWord. Nofilenew with equal value 1 in the section

Ban on the extended menu for the Create item

When choosing File-Create window An extended menu appears, which includes commands. Message, ad, contact, call via the Internet.


To remove this extended menu, use the type parameter DWord. NoExpandednewMenu with value equal to 1 in section HKCU \\ Software \\ Microsoft \\ Windows \\ Currentversion \\ Policies \\ Explorer


Open (Internet Explorer 4 and above)

If you want the user to not open a page (through file-open, Ctrl-O, or Ctrl-L), then create the following type parameter DWord. Nofileopen with a value equal to 1 in the section HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

Edit in ... (outdated)

Internet Explorer makes an attempt to determine the program you used to create and edit an HTML document. In the menu item File You may have a string Edit in notebook (or other text editor). To remove this command, assign a string parameter checkdocumentForProgid value no. In chapter

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main


Save as

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS


Print I. Preview

To delete items Print and Preview, then assign a type parameter DWord. Noprinting value equal to 1 in the section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS


Import and export

If you want to prohibit the user to use item Import and exportthen create a type parameter DWord. DisableimPortExportFavorites with a value equal to 1 in the section

HKCU \\ SOFTWARE \\ POLICIES \\ Microsoft \\ Internet Explorer

In this case, when trying to click on the button ReadyThe appropriate warning will be displayed.
Close (Internet Explorer 4 and above)

If you want the user to not close the page (through file-close, Alt-F4, system menu or pushing the cross in upper corner), then create a type parameter DWord. Nobrowserclose with a value equal to 1 in the section

HKCU \\ Software \\ Policies \\ Microsoft \\ Internet Explorer \\ RESTRICTIONS

Setting start page

Find or create the following Start Page string parameter in the section

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main \\

Create new string or change existing entry on your.

Now, when starting the browser, the specified page will be downloaded.

Replacing the header in Internet Explorer

Find or create a string window title in the section HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Main \\ Create a new string in it or change the existing entry to your. Removing the section, you restore the default header string

Replacement background in the toolbar in Internet Explorer

It is possible to install your background for the toolbar in Internet Explorer. To do this in the section

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ Toolbar

create a string parameter of the backbitmap, the value of which will be the full name of the BMP file with the desired picture - it will be connected to the mosaic on the windows panels. By the way, the conductor toolbar will also be shut down.

Information panel

When you open the web documents on the Internet Explorer local computer, displays a special information panel window specifying how we want to use the information panel corresponding to, for example, for blocking pop-up windows. If you put a tick in the corresponding flag, this will not appear this window. But if you want to return this panel, or, on the contrary, so that this window does not appear when creating your own installation disk, we do the following.

In chapter

HKCU \\ SOFTWARE \\ Microsoft \\ Internet Explorer \\ INFORMATIONBAR

we change the DWORD FIRSTTime type parameter. The value 0 disables the dialog, 1 - turns on.

The "Q" command in the address bar for receiving an article from the Knowledge Base from Microsoft

This setting will be useful to developers. Sometimes there are references to a specific identifier of the knowledge base article (Knowledge Base). You can quickly access this article, printing Q nnnnnn.where nnnnnn is the article number.
To do this, open or create a section
}

Did you like the article? Share it