How to connect a car subwoofer to a PC. How to connect a passive subwoofer to a computer. What is an active

Probably everyone heard about such a device as a subwoofer. However, not everyone represents what it is.

Subwoofer is a device used in the music equipment for more complete sensations. It produces low frequencies that are felt by a person physically.

Subwoofer - Source Source

Subwoofer is a high-quality bass. One of the properties low frequencies is their good distribution in a closed space, which complicates the search for the sound source. Thanks to this, it can be placed in any place convenient for you, where it will not interfere. And it will not affect your feelings.

The subwoofer has sufficiently bulky dimensions that are directly related to its power. Therefore, if you wish to experience an unforgettable feeling from watching a movie with a powerful bass, be prepared to highlight a separate angle to your dwelling. These devices were widespread. They are used everywhere: in home theaters, in clubs, cars and so on.

What are the subwoofers

So, if you decide to purchase a subwoofer, you need to study some minimum of information about them. Well, if not to get into the unpleasant situation when choosing and acquiring.

Now you know what a subwoofer is, then we will tell you what they happen, and most importantly - how to connect a subwoofer to a computer. These devices are active and passive.

Active subwoofer

Active subwoofer is a whole system equipped in a particular shape and sizes. In principle, this is the easiest option for an ordinary user, weakly dismantled in frequencies, electronics, and in physics as a whole. But for reference it is worth knowing that in the case, except high-quality amplifier and powerful speakerThere are still a device that allows filtering high frequencies, a device that coordinates the operation of the subwoofer with connected signal sources, and additional panels that allow it to adjust it for a specific situation. In the complex, all this gives you a high-quality bass.

Connecting an active subwoofer

Now consider how to connect the subwoofer to the computer. In this case, you should not have big problems. To begin, make sure that the sound card of your computer is compatible with the subwoofer. This information You can get in the documentation for the device or just ask the seller when buying. You can connect a subwoofer to a computer in several ways, depending on the existing connectors, plugs and capabilities of the amplifier or sound card. The connectors on the device have different colors, and they often coincide with the connectors on the sound card of your computer. If it is not so, or the connectors are not enough - do not be mistaken.

If the colors do not coincide, then note that under each output usually there is a illustration or a signature that informs about its purpose.

In the event that the number of connectors on the subwoofer and the sound card differs, you can experiment with an alternative connection method - through the input for speakers.

Now, when it was determined with all the subtleties, you can proceed directly to the question of how to connect the subwoofer to the computer. To connect through the connector for speakers, we will need an inexpensive and fairly simple adapter cable from a 3.5 mm jack into the usual two "tulip". Such a wire can be purchased or soldered by itself, in any case. non-cost task. Turn off the computer and amplifier. Next, we connect stereo colon to the amplifier, observing the polarity, in order not to spoil the sound of our system. Connect the "tulips" to the outputs of the amplifier, and the jack 3.5 connector is to the sound card outputs. Subwoofer We connect to the amplifier through a special connector. If there is no one, then to the outputs of the side speakers. Run the computer and after full loading turn on the amplifier. Next, set the volume parameters, set the sound mode you need. Now you can fully enjoy the pure bass and cause anger and envy in the neighbors.

Passive subwoofer and its connection

This device is a simple design from a powerful speaker in a box of a certain size and shape. Connect the subwoofer of this type to your musical system through the amplifier. If you already have any, then there will be no problems, and if not, you have to fork. After that, it can be connected, as well as active. If you decide to still connect a subwoofer without an amplifier, you should know that you act on your own risk, you can burn something. So, it turns on in the chain in parallel, that is, as well as ordinary columns, or to a separate output of the amplifier. In addition, additional resistance is quite powerful speaker in the chain badly affects the quality and volume of the system. At the same time, some processes occur with frequencies that worsen the quality of the bass. Therefore, to get a good sound, you have to move it around the room until you achieve optimal sound.

Output

Now you have sufficient knowledge to independently go to a specialized store and pass all the procedures: buying, consulting, connecting and settings - independently. If you are not burdened with financial difficulties, it will be better to purchase an active type device, and then you will not have questions about how to connect the subwoofer to the computer. However, if you want to save, or the hidden talents of electronics woke up in you, you can safely purchase components at a reasonable price and create your own hands a full-fledged speaker system. In any case, with a subwoofer, life is provided with a saturated bass, pleasure and indignation of neighbors.

For avid music lovers sound quality - above all. So people simply need to hear all the nuances of the melody of their favorite song. So, without a subwoofer does not do here. If you purchased a powerful audio system and want to connect it to a PC, prepare for difficulties. Connecting plugs in all ports music sometimes does not sound either its quality leaves much to be desired. Let's look at several simple waysHow to connect a subwoofer to a computer.

Ways to connect a subwoofer to a computer or laptop

Before choosing a sub, determine the parameters of the sound card on the device. If you have a laptop with one headphone connector, the question is how to connect a home theater to a computer automatically removed. System 5.1 (that is, 5 columns plus 1 sub) Connect to the laptop will not be possible. Maximum that you can do is buy two ordinary columns with the built-in receiver. If you want to connect the SAB to the system unit, read the number of inputs on the sound card. The prerequisite is their coincidence in the number with plugs from the audio system.

Active acoustics

Choosing an active audio system as a user, you did not lose. The built-in amplifier in the speakers removes many nuances of the connection, which even a specialist does not always know. Just stick the plugs from the speakers in the sound card connectors, and connect to the special (signed) entrance to the special (signed) entrance. In the absence of such a SAB, it turns on by the connector for speakers.

An antenna cable with RCA plugs (in the form of a tulip) is used as connecting elements. In one end, it is stuck in the subwoofer, the second either in the analog panel on the power supply, or ports for acoustic systems. In the latter case, the SAB and acoustics work in parallel at low sound frequencies. Sometimes, active subwoofers are connected to the amplifier, which increases the workload on the system.

Passive speakers

For an audio system without an amplifier, the receiver is additionally purchased, and the connection has a slightly different scheme. As the main parameter (except prices), its power is used when purchasing the amcuscant. It must coincide with the characteristics of the Sab (columns), which are written out by the passport instruction on the technique. According to experts, passive audio systems have great opportunities in sound settings than active.

How to connect a passive subwoofer to a computer? To do this, use a serial method of compound by acoustic and antenna cable. The first to connect the amp and sub (columns), the second is the same and the analog panel on the PC. Be sure to adjust the cutoff frequency, frequency limit. Volume Adjust exclusively for the entire audio system. Otherwise, you will spoil the sub, trying to add or drop the sound with the amplifier regulator.

Instructions for connecting

For an active subwoofer:

1. Turn off the PC from the network, prepare the audio system - buffer, columns, wires.
2. Cables from the speakers connect to the Spa and the panel, on the back system Block. Manufacturers, for the convenience of users, often produce plugs and connectors of the same color, so connect such audio systems is a pleasure.
3. 3.5 mm jack cable (white plug) connect speakers and audio card.
4. Connect the SAB to the map connector with the label. Wooofer or Sub. If this does not have, then the port for the side speakers is used.
5. Turn on the system and system unit into the network.

For passive subwoofer:

1. Make sure the computer is turned off.
2. Connect the sub and amplifier, and then connect it to the analog panel with a jack 3.5 mm cable. The second tulip stick in the amp. The method is suitable if the receiver has a connector for low-frequency devices. Otherwise, see the section, how to connect the columns to the computer.
3. SAB is connected to the central input (yellow) on the rear panel of the system unit. Do not forget to connect cables to microphone and linear connectors.
4. Turn on the system to the network and download the PC.

For passive columns:

1. Disconnect the PC and prepare the receiver, columns.
2. Acoustics is connected to the relevant cable amplifier.
3. The receiver connects to the system unit.

How to configure sound on your computer

Once you have coped with the connection, it is important to figure out how to set the sound on the computer. If you have no doubt that all cables are connected correctly, then it's time to do the settings of the audio system. Before you configure the device, wait for the operation of the operating system. Check that the driver is on acoustic system installed. Its presence is determined by the pop-up window on the right below (for Windows). If the buffer is new, then the drive with drivers are sold with it, if the old one, then download the appropriate application from the Internet will not be difficult. Procedure:

1. Install the driver.
2. Reboot.
3. On the taskbar with the right click on the speaker, call the context menu, go to the "Volume Settings".
4. Choose sound device - Your audio system.
5. Before turning on the sound on the computer, in the volume mixer (optional), set the sound level for the device.

Video: How to connect a car subwoofer to a computer

Gol on the fiction of the hitra! Acoustic systems with good parameters have never been cheap, and now there are a lot of money. A non-standard approach allows you to solve this problem and use a car subwoofer as an audio system. Before you enjoy the depth of sound and bass, carefully watch the video on the connection of such, it would seem that inappropriate equipment to the home PC.

Connecting an active subwoofer to a computer is somewhat different from the installation of the usual sound systemHere you can no longer do the usual audio adapter, since the connection of the subwoofer requires an additional connector.

You will need

• - Acoustic wires.

Instruction

First of all, before connecting the automotive subwoofer to the computer, it is necessary to view the subwoofer itself. As a rule, car audio systems feed on 12 V. However, it is also found with 24 or 16 V power supply if the nutrition is still 12 V, that is, two ways of connecting the subwoofer itself. The first is to power it from the computer's power supply. The second is to use an external power supply. Do not save on the power supply. Many sound problems are connected precisely with poor-quality power supplies. This is the case when it is better to overpay, but get a good sound.

When the subwoofer isted, it remains only to deal with how to connect a subwoofer to a computer. It will take the adapter from the computer audio connector to the subwoofer connector. In most cases, on the subwoofer itself there is a "tulip" type. Such an adapter cable can be found in most audio stores or radio markets. Either, in the presence of audio wires and connectors, solder it yourself. It will take it all at no more than 15 minutes.

It is less likely to meet when there are no connectors on the subwoofer. But there are contact sites or simply stick audio wires. The actions in this case are similar to the previous option, with the only difference that you will need an audio cable only with an audio connector or the connector itself, which will have to solder the subwoofer wires.

Before connecting the subwoofer to the computer itself, it is better to check it without connecting it directly to the computer. No one is insured against errors, but to lose the sound punishment, or even the entire computer because of an inaccurate soldering or improper connection, I do not want anyone. You can use the MP3 player or something similar. The sound may be a bit distorted - this is normal. Still, the subwoofer is not just a speaker. If there is sound - you can connect to the computer and enjoy powerful and qualitative sound Favorite compositions.

And a couple of tips that will help simplify work and improve the sound. Before soldering, it is better to draw what will break. Even if you have good memory, during operation, you can distract, for example, on telephone call. And the schematically sketched decay scheme will allow you to collect everything without errors.

In addition, all wires and connectors must be well inlaced. This is not only a safety requirement, but avoiding hissing and "wheezing" of speakers. Do not twist the audio system cables with each other or with other wires. It can give a fitting and make changes to the transmitted signal. What can pour out in long hours Looking out the cause of bad sound.

Having a car subwoofer, it is possible to improve the sound of a home audio system. Several wires, some time and straight hands will allow you to get a truly gorgeous sound.

Probably everyone heard about such a device as a subwoofer. However, not everyone represents what it is.

Subwoofer is a device used in the music equipment for more complete sensations. It produces low frequencies that are felt by a person physically.

Subwoofer - Source Source

Subwoofer is a high-quality bass. One of the properties of low frequencies is their good distribution in a closed space, which complicates the search for a sound source. Thanks to this, it can be placed in any place convenient for you, where it will not interfere. And it will not affect your feelings.

The subwoofer has sufficiently bulky dimensions that are directly related to its power. Therefore, if you wish to experience an unforgettable feeling from watching a movie with a powerful bass, be prepared to highlight a separate angle to your dwelling. These devices were widespread. They are used everywhere: in home theaters, in clubs, cars and so on.

What are the subwoofers

So, if you decide to purchase a subwoofer, you need to study some minimum of information about them. Well, if not to get into the unpleasant situation when choosing and acquiring.

Now you know what a subwoofer is, then we will tell you what they happen, and most importantly - how to connect a subwoofer to a computer. These devices are active and passive.

Active subwoofer

Active subwoofer is a whole system equipped in a particular shape and sizes. In principle, this is the easiest option for an ordinary user, weakly dismantled in frequencies, electronics, and in physics as a whole. But for reference it is worth knowing that in the case, in addition to a high-quality amplifier and powerful speaker, there are still a device that allows you to filter high frequencies, a device that coordinates the operation of the subwoofer with connected signal sources, and additional panels that allow it to adjust it for a specific situation. In the complex, all this gives you a high-quality bass.

Connecting an active subwoofer

Now consider how to connect the subwoofer to the computer. In this case, you should not have big problems. To begin, make sure that the sound card of your computer is compatible with the subwoofer. This information can be obtained in the documentation for the device or just ask the seller when buying. You can connect a subwoofer to a computer in several ways, depending on the existing connectors, plugs and capabilities of the amplifier or sound card. The connectors on the device have different colors, and they often coincide with the connectors on the sound card of your computer. If it is not so, or the connectors are not enough - do not be mistaken.

If the colors do not coincide, then note that under each output usually there is a illustration or a signature that informs about its purpose.

In the event that the number of connectors on the subwoofer and the sound card differs, you can experiment with an alternative connection method - through the input for speakers.

Now, when it was determined with all the subtleties, you can proceed directly to the question of how to connect the subwoofer to the computer. To connect through the connector for speakers, we will need an inexpensive and fairly simple adapter cable from a 3.5 mm jack into the usual two "tulip". Such a wire can be purchased or soldered by itself, in any case it is an easy task. Turn off the computer and amplifier. Next, we connect stereo colon to the amplifier, observing the polarity, in order not to spoil the sound of our system. Connect the "tulips" to the outputs of the amplifier, and the jack 3.5 connector is to the sound card outputs. Subwoofer We connect to the amplifier through a special connector. If there is no one, then to the outputs of the side speakers. Run the computer and after full loading turn on the amplifier. Next, set the volume parameters, set the sound mode you need. Now you can fully enjoy the pure bass and cause anger and envy in the neighbors.

Passive subwoofer and its connection

This device is a simple design from a powerful speaker in a box of a certain size and shape. Connect the subwoofer of this type to your musical system through the amplifier. If you already have any, then there will be no problems, and if not, you have to fork. After that, it can be connected, as well as active. If you decide to still connect a subwoofer without an amplifier, you should know that you act on your own risk, you can burn something. So, it turns on in the chain in parallel, that is, as well as ordinary columns, or to a separate output of the amplifier. In addition, additional resistance is quite powerful speaker in the chain badly affects the quality and volume of the system. At the same time, some processes occur with frequencies that worsen the quality of the bass. Therefore, to get a good sound, you have to move it around the room until you achieve optimal sound.

Output

Now you have sufficient knowledge to independently go to a specialized store and pass all the procedures: buying, consulting, connecting and settings - independently. If you are not burdened with financial difficulties, it will be better to purchase an active type device, and then you will not have questions about how to connect the subwoofer to the computer. However, if you want to save, or the hidden talents of electronics woke up in you, you can safely purchase components at a reasonable price and create your own hands a full-fledged speaker system. In any case, with a subwoofer, life is provided with a saturated bass, pleasure and indignation of neighbors.