Apple Watch Series 1 twisted. What if the Apple Watch screen does not work? Fast activation of the "without sound" mode

If a apple device Watch does not turn on and refuses to respond to pressing the buttons, try to deal with the cause of the problem on your own. Having an instruction I. required toolsYou can quickly eliminate simple malfunctions. Find out why the device does not turn on, check the integrity of the control board and the reliability of contacts can be even without special skills.

Most often, the device Apple Watch. fails for the following reasons:

• the power button broke down
• moisture has occurred inside the protective corps
• the clock depended after the update or as a result of a failure software
• because of the mechanical damage, there was a breakdown of the display of the watch

A common reason, due to which the Apple Watch device does not turn on, - discharge or failure of the battery. In this case, recharging or replacement of the battery is necessary. Hold the button on the side of the device and the Digital Crown wheel to restart the clock until it starts to burn the "apple" - the corporate Icon of the EPL.

Why the device does not start

If the Apple Watch device suddenly stopped turning on, the problem may be related to the failure of the parameters. Carefully treat Apple alerts occurring on the screen. In them, developers describe the problems and give variants of their elimination. If Apple Watch watches are discharged, you should connect them to the charger and wait for the company's logo.

If the Apple Watch clock has stopped turning on or reacting to charging connection, you can correct the situation in the following ways:

• check the cable insertion in the connector and the adapter in the outlet
• remove protective film from charger
• clear device from pollution and dust
• re-start the device (click on the side button)

How to quickly restart the electronic device

You can also check the cost of charging. If the Watch icon is burning, charging Apple. Must occur automatically. To restart the Apple device and make sure that the installed applications are managed, click on the side panel of the clock and the wheel Digital CROWN.

Often the reason for which Apple Watch does not turn on is the operating mode of energy saving. In this case, clicking on the screen will not lead to the launch of the clock.

What you need to know before proceeding to restore the device

To enable Apple Watch, press the power button located on the right side of the device. At the same time, you will notice that the "apple" burns. The loading duration is determined by the Apple device model and is usually about a minute.

The iWatch device refers to the category of mini-computers, installed applications which you need to periodically update. Apple Watch users note that after updating the software of the device begin to work faster. If you want to translate Apple Watch to the economical battery power consumption mode, hold the button on the right side of the device before the exercise slider appears.

No messages on the display

Apple Watch watch is not able to function after discharge. The watch display on which notifications appear, consumes a significant amount of energy. It is often the reason that the device does not appear on the device, the clock lock is enabled or the activation of the "Do not disturb" mode. Solve the problem in the following ways:

• remove the password, because of which Apple Watch does not turn on, and the watch display is blocked
• ensure the appliance apple settings

Simple methods of fixing devices

If you want to check the serviceability of the charger, try to restart the clock. To do this, hold the side button and Digital CROWN for 10 seconds. In the case when the charge icon is not visible, leave the Apple device on to the feeding device for several hours.

Simple repair methods smart watchesthat turn off spontaneously:

• drying devices
• replacing charging
• apple technician settings

Complex breakdown breaks

If the Apple Watch watch has stopped turning on and cannot immediately diagnose the problem, the breakage may be serious. A malfunction can be associated with the failure of the button that is responsible for turning on the device, disruption of the microcircuit or other reasons.

To determine the cause of the malfunction, you will need special equipment and tools. With their help, you can perform the following repair operations:

• extract and replace the button responsible for turning on the Apple device
• update software if the clock depended or turn off spontaneously
• restore Apple clock power chip
• replace the charger connector

Apple Watch users often have such problems - after discharge, the clock depended or turned off. For a compulsory restart, you should simultaneously press the side button and the Digital Crown wheel. If after rebooting the clock turned on, but you do not see that the "apple" burns, or a notification has appeared with red exclamation familiarThis means that the device cannot be used because of the chip breakdown or other parts.

Effective device solution solving device

If the Apple Watch device does not turn on and you need help professionals, contact performers youDo service. Experts quickly and inexpensively will find out the reason for which the device does not turn on, the clock depended or the power button stopped functioning.

Cooperation with the performers Yudu gives the following advantages:

• provision of services with departure at any specified address
• replacing parts for original components
• round-the-clock
• maintenance experience of all models of iWatch devices

Leave the application on this page by describing your problem (for example, the Watch logo is lit, the Apple charging does not happen "). Experienced performers will help you on any day of the week if your Apple Watch device does not turn on at all.

Like any technique, Apple Watch breaks, beating and fail. All this, of course, rests on money, but with time service centers managed to reduce the cost of repairing hours, so now Apple Watch is cheaper than buying new ones (especially if you are not lucky to break). Today we will deal with the MODMAC service center of the most common problems of Apple's smart watches.

Perhaps Samoa frame problem "Apple" clock is a fragile discovering display. Of course, there are craftsmen who are so carefully related to devices that there are no damage on them even with time, and the clock look like new, but there are not so many such lucky. Usually, users are quite often tailored to buckles on bags, doors, angles or even walls. And this inevitably leads to damage to the device.

In addition, the clock, it happens, fall when the user puts them on the hand and trying to fasten. Danger of fall, unlike hitting the buckle, is that in this case can not only break the display, but also damage the battery, and its replacement will cost. There is also a chance of damage to the loop, which is responsible for: however, it is replaced, and only the original components are used - there are simply no other.

Fragile glass

Apple has been known to provide users with a choice - the stability of the glass or to scratches (sapphire glass), or to breaking (oleophobic coating). You can protect the clock with various shockproof covers and glasses, but then the tactile sensations will be lost, and it looks peculiar.


If the glass is still damaged, its replacement. It is performed quickly enough, but after replacement it follows some time to wait for the adhesive layer between the glass and the hardware body.

Swollen battery

Also one thing frequent breakdowns is a swollen battery. If this happens, about a year the battery fails, the clock is discharged much faster, and that the worst when swinging - the display can be pushed out. When you try to compact it, an explosion of the battery may occur, so if you notice the "peeling" of the display, you must urgently contact the service for diagnosis and repair.

Contact with water

As for the loops of the buttons, vibrations, antennas and other small elements, they are out of order, they practically do not go and repair is extremely rare. But always be careful when contacting water, be it the very first Apple Watch or a new generation of hours - they are still susceptible to moisture. Apple Watch Series 2 is less, however, with a frequent contact with water for a long time in the clock, moisture can fall, and this, in turn, again brings users to service centers.

Well, do not forget that for all readers the site has a 10% discount for Apple's equipment at the MODMAC service center!

If you do not work on the Apple Watch device, it does not turn on and does not respond to pressing the buttons, you can cope with the problem yourself. This requires instructions and appropriate tools. To understand why the screen does not work, do not necessarily have special skills.

Why the screen does not work

To the most popular reasons why Apple Watch may fail include:

• launch key fault;
• moisture penetration through the protective case;
• the device hung after a failure of software or after the update;
• mechanical impact on the clock screen.

Ways to eliminate breakage

Often the screen may not work due to the fact that the Apple Watch device was discharged. Then just put the watch for charging. If it does not help, then follow next instruction:

1. Check if the magnetic charging cable is inserted for Apple Watch in the connector.
2. Then clean the clock from dirt.
3. Try to turn on the device by clicking on the side key.

What will help workers in the repair service center

If the Apple Watch screen does not turn on, and you cannot determine why this happens, it means that the problem is serious. To determine the malfunction, special equipment and special tools will be useful - you will have to carry the clock in the repair service center.

Photo: Replacing Apple Watch Display

Experts will help:

• delete and replace the clock power button;
• resume device nutrition;
• replace the watch display;
• change the connector to connect the recharging.

What to do if the Apple Watch screen does not work: an independent reboot of hours

Sometimes, after discharging, the smart clock hangs or turn off. To restart the Apple Watch, you need to synchronously press the side key and the Digital Crown wheel. Perhaps after that, the Apple Watch screen will start working.

Apple Watch Series Clock is a popular addition to a mobile phone. The device has a lot useful featureswhich are almost not used. But it is these functions that make a clock with an independent instrument that simplifies daily affairs.

Series and opportunity

Apple Watch S1 is the first line of smart watches working on the basis of independent powerful processor. What can devices, and whether to buy them? All that the subsequent lines can, but at the same time lagging behind technologically. Buying Apple Series 1 clock is only if they really have a need. This is due to the possibilities of watches by which they exceed mechanical and electronic competitors.

These include:

• Possession of a dual-core processor;
• The standard option is an aluminum housing, which allows the clock to be light;
• The presence of spray protection and moisture resistance;
• Finding in water to half an hour;
• Voice functions;
• Communication with mobile phone and transmitting data to hours about calls and messages;
• The presence of Wi-Fi and Bluetooth.

The clock choose those who need exactly in such a portable assistant. Also, the S1 series choose athletes, but it is not necessary to take later modifications. The EPL of the first line is very popular with the Apple Watch Series 1 Sport model. This model has increased characteristics necessary for a comfortable sport. Here Apple has taken into account all the nuances. Watches waterproof and have a heart sensor. Model Difference - best firmware and improved housing resistance to shocks.

Apple Watch Series Sport was released in two versions, but the Apple Series 1 42mm was more popular, which went on sale in 2016. It was this model that became a sports assistant of the first line of smart clock from Apple.

See also:

Samsung Galaxy Gear. S - more than hours

Apple clock is a progressive series of hours that help in a daily atmosphere. For each lifestyle there is its own model providing everything you need for comfort.

Characteristics

Apple in its first line of smart watches has standard dimensions in dimensions. The choice is in two versions - Apple Watch Series 1 38mm and 42 mm. Dimensions provide different display features in the form of a color gamut and size. But in the other components, they differ little, if you do not take such models like Apple Watch Series 1 Sport.

The company has released the first ruler simultaneously with the second, but the differences are essential. This also applies to the design and characteristics of the model range. But this does not change the fact that the first line committed a breakthrough in the smart watches market.

Description of the series for the main points:

• Ease of use as hours, since the models are sensitive and the time will be shown at easy touch;
• Receiving messages from mobile to hours and reading them;
• Receiving calls - the closure of the screen with hand - reset;
• Availability voice assistant Siri, which sends messages or creates reminders;
• Calendar with developed functionality;
• Shop S. using apple Pay allows you to make transactions with the help of hours;
• Availability of mail and news block;
• Router and physical state sensors. Especially many features in Apple Watch Series 1 Sport;
• Communication with the mobile phone of the iPhone series allows you to fully use device capabilities;
• Autonomous mode without recharging is designed for 18 hours. Charging is completely equal to 2.5 hours;
• The firmware has a memory of 8 GB, but divided into parts. For music - 2 GB;
• The display is easily controlled by simply pressing thumb. It is possible to increase the icons.

All these moments have both Apple Watch S1 42mm and 38mm model.

Display and housing

Differences different models Manifest themselves in screen characteristics and display. Also different overall dimensions. This manifests itself not only in width, but also in weight. Standard case is created from aluminum, but Apple Watch S1 42mm also has a composite back cover.

See also:

Smart Watch Michael Cors - Characteristics Overview

The material for the housing is used different. Case happens:

• Golden;
• Aluminum with a composite lid;
• Aluminum solid type;
• Silver;
• From pink gold.

From other materials, the case for Apple Watch S1 42mm can only be made to order.

The presence of all useful functions and makes a popular series of smart watches from EPL. It is worth remembering that the choice of model range depends on the requirements for daily care, as well as to the display capabilities. In relation to Apple Watch S1 42mm, Apple Watch Series 1 38mm models are not much inferior. The main difference is only in screen resolution 272 × 340 versus 312 × 390 pixels from Apple Watch S1 42mm.

The clock has a lot of useful features. For example, you can listen to music directly from the clouds when connecting and sync or listen to the compositions from the device's memory. The control is performed with only two buttons, including a wheel, helping scrolling display icons or news blocks. The possibilities of the device can be increased with the help of various accessories.

Models of smart watches work as in sync with mobile deviceAnd without him. That is why the clock is universal.

Comparison of models, what to choose Apple Watch Series 1 or 2?

Models of the first series have small differences from subsequent lines. The choice depends on the daily activities, since model rows differ in several criteria.

Differences of the second line of EPL devices from the first:

1. Moisture resistance of increased type;
2. The possibility of diving to a depth of up to 50 meters;
3. Module GPS speed mode and autonomy without a mobile device;
4. Increased display brightness;
5. Increased power processor;
6. Weight weight more;
7. Thickness is increased;
8. The possibility of making a case from different materials, including ceramics and steel;
9. Ionic glass is replaced by sapphire;
10. Technological superiority with increased speed;
11. The cost is higher by 6-8 thousand, in each overall size of 38 or 42 millimeters.

Falls asleep when you do not use them actively. There are several comfortable featuresAllowing to awaken or activate the screen.

Awakening after touching, awakening to raise the wrist, the opening of the last applied application is just a few of them. Below we will tell you how to configure the awakening of the Apple Watch screen.

How to Open Apple Watch Wakeup Settings

1) Open the application Watch. On your iPhone or go to Settings on the Apple Watch themselves.

2) Choose Maintenance.

3) Go to section Sleep outlet screen.

How to configure screen awakening

When you enter the section of the output screen from sleep, you will see several points. They will be the same and on the clock themselves, and in the application on the iPhone.

Activation with wrist lifting

This is the easiest and most convenient way to activate the Apple Watch screen. It will automatically wake up when you raise your wrist. Make sure you have a properly configured screen orientation depending on what hand you wear a clock.

Go to Maintenance > Position of watch. After that, you can include the option Assets. With wrist lifting.

Audio autorun.

This feature is perfect for those who often listen to music or podcasts. To do not get your smartphone every time, you can enable autorun applications from audio on smart hours.

Just click on the switch next to the option Automotive Audio.

Show the latest application

Here you can configure the display of the last applied application.

Suppose you worked with a calendar, but a little distracted. It can be done so that when the screen is activated, it opened automatically.