Glass for phone rear camera. How to remove scratches from the phone camera? Advantages of repairing a smartphone camera in our company

With the constant use of smartphones, their cameras are often covered with scratches, cease to work. It happens that dust falls into them. To restore the possibility of photographing, you need to contact professionals. Our service center Manages repair and replace the camera in the phone. Our specialists work with devices from all manufacturers and are ready to fix the breakdown of any complexity.

Type of work	Cost
Diagnostics of faults	IS FREE
Camera replacement	2 000 rubles.

When is the repair or replacement of the camera in the phone?

If it is malfunction of the item there are several options for solving the problem.

Replacing glass on the phone camera is often used in the following cases:

squares, scratches and cracks on the lens. For similar problem We simply install a new detail;
faulty camera controller. This breakdown is more serious. It is detected using hardware diagnostics. Therefore, if an externally camera looks like a new, we connect a smartphone to a computer and check the controller. The main reason for the defect is corrosion of the fees due to fluid ingress, mechanical damage due to falling or hitting a mobile phone. After finding the problem, we also replace the faulty item to a new one;
low shooting quality. If your smartphone is perfect in everything, except frontal or rear camera, We can replace it with more powerful. This service It will cost cheaper than buying a new phone with high-quality shooting.

We carry out repair of the device in the following cases:

Violated the operation of electronics responsible for the functioning of the chamber. If contacts are disconnected, we turn them out without fully replacing the part. Frequent cause This breakdown is an inaccurate handling of cells.
Reducing the quality of photos. If the images appear on the images, they are muddy, dark, visible stains, the cause can be hitting dust or fluid on the lens. We open the device and produce thorough cleaning of parts.

Advantages of repairing a smartphone camera in our company

Fixed prices for all types of services and payment after work.
Urgent repair of smartphones on the day of circulation.
Original details from verified suppliers.
Free telephone check for defects.
Delivery of a good smartphone courier to any area of \u200b\u200bSt. Petersburg.
The warranty on the work produced and the spare part is 100 days.

To order a replacement or repair of glass chambers on the phone in our company, come with a smartphone to our service center at the address: St. Petersburg, Vasilyevsky Island, Middle Avenue, 36. To find out how much it costs Details for your phone, call the number

Hello respected forum users. Today I will tell you how to replace the cracked glass of the camera Samsung Galaxy S6 in 5 minutes and 130 rubles. To the internet - please under the cat ...

So, we have a mobile samsung phone Galaxy S6 with whom, despite the gentle handling of it, cracked the glass of the camera and a lot of dust stuffed through this crack, which strongly reduced the quality of the pictures obtained:

And here I will think about how to do ... On YouTube there is a replacement video, but it changes directly with the frame in it, which requires removing the glued back cover phone This is a torch, there is a risk of damaging this very lid, also after replacing replacing 2-sided glue sticker, which is part of the Chinese expensive.
For help to the officials, there is no point, because it will drive 3 skins. The left desktops on the repair of mobile phones are less than 1000r. For work, they refused to take up, referring to the need to remove the lid.
And then I came across the instructions for replacing glass camera on ifixit (https://ru.ifixit.com/guide/samsung+galaxy+S6+Camera+Lens +Glass+RePlacement/43301), and I was interested in the last step:

Those. Separately, the glass itself is very much changed.
An order was made. It came a little wrong what is needed, but about it below.
Another problem arose: how to choose it from the frame, because Glass is not broken, but just cracked. It is impossible to hide it on the side, it is also not an option to split it, because There is a risk of damaging the camera, and the "Thank you" stabilization system will not say. And then I dares me:

Yes, yes it is the same "car 2-sided scotch", dear and very sticky, was bought once a long time ago.
We take the fetter of suitable diameter and tape glue to the end, pre-degreased with alcohol (isopropanol 99%). Cut the scotch by contour:

Next, we glue this design to the glass, which is also degreased:

Next, we til down the handle and spare the old glass:

That's what sent me a seller:

As can be seen, in addition to the glass, the framework itself is present on which stickers are pasted. But I needed a cereal sticker individually. It can, of course, could be fascinated and cut it out of thin 2-sided tape, but I considered that the remaining adhesive layer on the old frame is enough to hold the new glass.
Next, we remove all the dust from the camera with a soft tassel (a squeezed air cylinder would be very powerful), we glue a new glass, for loyalty heating all the hair dryer, so that it fell better.

The result was very pleased! The glass to the touch is not plastic, the oleophobic coating also applies. Snapshots - just super: disappeared to a muck, glare, etc., which, however, is not surprising.
Also, another seller ordered protective glass on camera and pulse sensor:

At the pulse oximeter pasted immediately, because It is plastic and in small scratches. On the glass of the camera, it is possible in the future, while so good.

I hope the review was useful. All Merry Christmas!

I plan to buy +10. Add to favourites I liked the review +31 +66

In our mobile Century any person has several devices with touch screens, whether mobile phone or tablet. But after some time, small, and sometimes large scratches appear on any touch device. If the cracks are large enough, and you noticed that this led to the loss of some functions or failures in operation, be sure to change the glass or display. But if on the screen only small losses, you can cope with it yourself. How to remove scratches from the phone camera - this will be discussed in this article.

Preparation for polishing

Before you proceed to polishing, you need to prepare work:

Turn off the device fully.
External connectors swipe with a painted scotch or tape. This will prevent ingestion of the gadget of water and other foreign substances.

Important! Best patience may have to spend a lot of time to put your gadget in order.

Paste GOI

Fully get rid of scratches is unlikely to succeed, but they can be disguised. This can be done with polishing. How to remove scratches on the phone camera and polish the display?

You can use the means called the Goe Pasta. It happens a few species, depending on the grain.

Important! For polishing the display, the smallest paste is suitable. Machine oil does not hurt. You will need only a few drops to dilute the gayas.

Operating procedure:

First clean the screen and frontal chamber From pollution, otherwise - the result will not please you.
Take a woolen fabric, soda it paste and drop of a drop of machine oil.
The resulting mass in the display with the same woolen cloth.
It is necessary to polish until the scratches become small enough, if you are lucky - they will not be visible at all.

Polishing toothpaste

How to polish the camera on the phone with a toothpaste? For these purposes, you will need a conventional white toothpaste, without any additives in the form of crystals or granules:

Apply a little toothpaste on a scratched surface. It is possible to polish with a piece of soft tissue, cotton swab or a special microfiber wipes.
Rub the remedy with circular motions within a few minutes.
The remnants of the toothpaste can be removed by a slightly damp soft cloth.
If the result did not impress you, you can get excavated again.

Polishing of food soda

In the same way, you can polish the surface with the help of food soda, which is in the kitchen in any house:

Divide Soda small quantity Water before receiving Cashitz.
Apply this mixture on a soft cloth or a napkin and a soft movement, polish the surface.

Important! Try not to put it on the surface so as not to aggravate the defect.

How to eliminate scratches by polyrolla?

To begin with, you should purchase a special polyrolol. The tool must be in its composition cerium oxide. Polyrol you can buy both ready and in the form of a substance that needs to be dissolved before use. The first option is much more convenient to use, however, soluble powder will provide high quality polyroli.

Operating procedure:

Prepare polyrolol. In the event that you bought it in the form of a powder, it must be dissolved. Act according to the instructions. Purple the polyrolol in the indicated amount into the bowl, gradually adding water and stirring the mixture.

Important! This tool in no way should fall on places like a phone speaker or a hole for charger, headphone socket. In addition, it is quite dangerous for the smartphone camera. Therefore, if you want to remove scratches on the camera, then it is necessary to use it very carefully or choose another polishing method.

Now it is necessary to grasp the polyrolol with a cotton cloth or cotton swab. The surface should be handled until the damage is disappeared or becomes much smaller.
At the end of polishing, it is necessary to remove the surplus with a dry cloth or napkins.

Vegetable oil

Vegetable oil can provide timely help for your device. True, it is used rather in order to give the surface a beautiful shine, well, small scratches will become less noticeable. Just drip the oil drop on the screen and scroll with a dry soft cloth.

Professional means

There are also professional tools for polishing gadget screens. The most popular means - the Displex Display paste is a completely new type of polishing paste that does not contain abrasive elements. The procedure for removing scratches and scuffs is performed quickly.

Important! The contents with proper use are enough for 8-10 polishes - everything depends on the surface of the surface being processed.

Displex paste does not contain abrasive elements, after applying this means, the display does not become muddy. There is only one significant drawback - a fairly high price.

Important! If you failed to restore the camera, but you use it constantly, it makes sense to think about buying a more advanced device. Check out our rating.

Prevention of scratching

How can I protect the phone and the display as a whole from the appearance of scratches?

Try to wipe the device screen as often as possible so that it always looks clean. Soft fabrics are best for this. There are special napkins and liquid for cleaning the display.
If you want to protect touch screen From small damage, you should purchase a special film or another protection option. Any of the protection available today is cheaper than the replacement of glass or displays.
Do not wear a mobile phone in your pocket together with keys and other things that can apply the damage screen.
Do not give your gadget to small children.

Hello respected forum users. Today I will tell you how to replace the cracked glass of the camera at Samsung Galaxy S6 in 5 minutes and 130 rubles. To the internet - please under the cat ...

So, we have a mobile phone Samsung Galaxy S6 from which, despite the careful handling of it, cracked the chamber glass and a lot of dust stuffed through this crack, which strongly reduced the quality of the pictures obtained:

And here I will think about how to do ... On YouTube there is a replacement video, but it changes directly in it directly with the frame, which requires removing the adhesive back of the phone. This is a torch, there is a risk of damaging this very lid, also after replacing replacing 2-sided glue sticker, which is part of the Chinese expensive.
For help to the officials, there is no point, because it will drive 3 skins. The left desktops on the repair of mobile phones are less than 1000r. For work, they refused to take up, referring to the need to remove the lid.
And then I came across the instructions for replacing glass camera on ifixit (https://ru.ifixit.com/guide/samsung+galaxy+S6+Camera+Lens +Glass+RePlacement/43301), and I was interested in the last step:

Those. Separately, the glass itself is very much changed.
An order was made. It came a little wrong what is needed, but about it below.
Another problem arose: how to choose it from the frame, because Glass is not broken, but just cracked. It is impossible to hide it on the side, it is also not an option to split it, because There is a risk of damaging the camera, and the "Thank you" stabilization system will not say. And then I dares me:

Yes, yes it is the same "car 2-sided scotch", dear and very sticky, was bought once a long time ago.
We take the fetter of suitable diameter and tape glue to the end, pre-degreased with alcohol (isopropanol 99%). Cut the scotch by contour:

Next, we glue this design to the glass, which is also degreased:

Next, we til down the handle and spare the old glass:

That's what sent me a seller:

As can be seen, in addition to the glass, the framework itself is present on which stickers are pasted. But I needed a cereal sticker individually. It can, of course, could be fascinated and cut it out of thin 2-sided tape, but I considered that the remaining adhesive layer on the old frame is enough to hold the new glass.
Next, we remove all the dust from the camera with a soft tassel (a squeezed air cylinder would be very powerful), we glue a new glass, for loyalty heating all the hair dryer, so that it fell better.

The result was very pleased! The glass to the touch is not plastic, the oleophobic coating also applies. Snapshots - just super: disappeared to a muck, glare, etc., which, however, is not surprising.
Also, another seller ordered protective glass on camera and pulse sensor:

At the pulse oximeter pasted immediately, because It is plastic and in small scratches. On the glass of the camera, it is possible in the future, while so good.

I hope the review was useful. All Merry Christmas!