A wireless mouse can be wired. How to connect a new mouse? Wireless mouse with receiver

How to connect a new mouse?

Master's response:

If you spend most of your time at the computer and use your keyboard and mouse very actively, you probably had to deal with their breakdowns. Nothing can be done about it. Sooner or later, any technique can fail. And it is better if it is a mouse, and not some other, more complex and expensive component of your computer. Consider that you got off lightly if your mouse just "died" ... You can easily compensate for this "loss" by buying a new nice and functional mouse.

Disconnect the cord of the “old deceased” mouse from the corresponding connector of the computer system unit, and ... In general, do with it what you want, it is no longer needed.

Prepare a new mouse. Now it will become your right hand and will help you find the information you need, play games, watch videos, movies, work, etc. get to know her better. To do this, determine the type of interface it uses. It will likely be one of the most commonly used PS/2 or USB interfaces.

Let's say your mouse has a PS/2 interface. To connect a mouse to a computer, find the connector you need to connect, located on the back of the system unit. He is not alone there. There are two of them: green and purple. And if purple is for connecting a keyboard (remember, this information may be useful to you later), then green is just for a mouse. You are very lucky if your computer motherboard is modern enough and smart enough to be able to determine the type of device that is connected to it. In this case, the mouse will work from any connector. Unfortunately, not all motherboards have this feature.

It is possible that your computer has only one PS/2 connector. It should not be excluded that the connector is completely absent. The presence of one connector assumes the connection of either a mouse or a keyboard. To connect a second device, you need a USB connector. This is due to the gradual departure from the use of PS / 2.

In the event that your new mouse has a USB interface, feel free to connect it to the desired connector. Today, most modern computers have a sufficient number of USB connectors designed to connect various devices. Some of them, for convenience, can be located on the front panel of the system unit case. Connect the new mouse to the connector that is most convenient for you.

It will be of great help to you that when you connect a new mouse, a standard driver will be automatically installed. Therefore, you will not need any additional effort to set up this device. However, if the mouse has additional buttons and, accordingly, additional functions, you will have to install the drivers yourself. But here everything is quite simple. The kit with such a mouse will definitely include a CD. Turn on your computer and insert this disc into your computer's drive. After fully downloading the necessary text material, study the information provided, find and select the "Install driver" command. Upon completion of the program associated with installing the driver for the mouse, it may be necessary to reboot the system.

The mouse is the main assistant to the PC user. Previously, we dealt with only one type of mouse that connected to a computer using a special connector, but now there are mice with a USB cable and even wireless ones. In this article, we will analyze how to connect a mouse of any type to a computer.

Classics of the genre

If you have a good old mouse with a PS / 2 connector, then all the connection comes down to a very easy task - just plug the mouse into the appropriate PS / 2 port on the computer, usually located on the back of the system unit. After a few seconds, the mouse will be detected and ready to go.

USB connector

Connecting a mouse with a USB connector is also very simple, insert the USB connector of the mouse cable into one of the USB ports on the computer, wait a few seconds and start using the mouse. No software installation is required.

Wireless mouse with receiver

If the mouse is wireless, then it comes with a special receiver with a USB connector, which must be inserted into any USB port on the PC. Turn on the mouse using a special button / lever on it, wait until the receiver and the mouse "make friends", and you can start working.

Wireless mouse with Bluetooth

A wireless mouse is very convenient, but if you get a model with a receiver, there is a problem - it is very easy to lose, and therefore, a wireless mouse with Bluetooth is probably a more convenient option. However, keep in mind that such a mouse will only work if your PC has a Bluetooth module.

To connect a wireless mouse to a computer:

1. turn on Bluetooth on the PC and turn on the mouse itself;
2. in the Bluetooth menu on the computer, start discovering a new network (the name of the mouse network can be found in the device documentation);
3. once the desired network is found, select it and click the "Connect" button.

All! After a few seconds, the mouse can be used.

Important point! The wireless mouse is powered by batteries, so be sure to turn off the mouse after use. In addition, remember to replace the batteries in a timely manner - most problems in the operation of wireless mice are related to the discharge of batteries.

What is more convenient?

At first glance, of course, the answer is obvious - a wireless mouse is more convenient than a wired one, but if you consider that, firstly, a wireless mouse needs regular battery replacement, and the maximum range at which it can interact with a PC does not, as a rule, exceed 3 meters, the answer is not so obvious. Of course, it is much more economical to buy a wired mouse - it is cheaper by itself and does not require batteries, but for those who are tired of wires, it is still better to deal with a wireless one.

The rapid development of technology has led to the fact that any device for processing, storing and exchanging information should be as mobile as possible. The presence of wires can be a big hindrance in this. Therefore, in recent years, wireless computer peripherals have been in great demand. In this regard, many people have the question of how to connect a wireless mouse to a laptop. As for a desktop computer, wireless devices are about optimizing the workplace, its comfort and functionality.

Connection options

There are two ways to connect a wireless pointer to a laptop or PC:

• Using a special USB adapter that comes with the mouse.

• Using the built-in Bluetooth adapter in your computer. It is important to note here that it is present in laptops, but it does not happen in all stationary PCs. If not, you will have to get an external Bluetooth adapter.

In the first case, everything is simple. The adapter is included with the purchased device. Usually there is a special fastener for it on the mouse body or in the battery compartment. It looks like this:

Inserted into USB port. Remember to install the batteries and press the power button or move the lever on the mouse body, on the back, to the ON position. In most cases, this is enough to make the device work: the indicator light lights up, the cursor on the screen moves.

Sometimes you need to install a driver to work correctly. It is located on the disk that is included in the kit. If there is no disk, you can find the required driver on the Internet, on the official website of the device manufacturer, download it and install it following the instructions provided.

It happens that for some reason the mouse does not have a USB adapter. Then it is possible to connect the mouse to the laptop via Bluetooth. This operation is a little more complicated. Here is a step-by-step instruction for this connection method.

A window will appear, the brand and model of your mouse will be displayed there, select it and click "Connect".

Choose "Mouse". The system provides mouse control parameters that can be customized:

You can connect a wireless mouse to a computer in the same way. If your PC does not have a built-in Bluetooth adapter, connect an external one via the USB port. Wait for the computer to see and recognize it. Next, follow the step-by-step instructions, repeat steps 1-3, which are described above. After these manipulations, you can use this convenient and compact device.

Do not rush to throw away a wired mouse if you are using a desktop computer. It can always serve as a reliable replacement for a wireless device in case of dead batteries or any problems. If you have a laptop, then a touchpad will come to your aid in an unforeseen situation - a built-in touch mouse.

How to connect a wireless mouse to a tablet

Sometimes there is a need to connect a wireless mouse and keyboard to a tablet or phone, for example, for typing in large volumes, for processing it when there is no access to a desktop computer. Some tablets are equipped with a standard USB port. In this case, connecting a wireless mouse will not cause difficulties. Proceed in the same way as when connecting a mouse to a laptop. If there is no such port, then the tablet always has a micro-USB connector and you can simply use a USB-micro-USB adapter. Usually it is included in the kit, or purchased separately. It looks like this:

Insert the mouse adapter into the USB port and turn on the mouse. Through such an adapter, it is possible to connect a regular, wired mouse to the tablet. A signal that the manipulator is connected to the tablet is the appearance on the screen of a standard cursor icon in the form of an arrow.

If you need to turn on a wireless mouse and keyboard at the same time, and there is only one micro-USB connector, you can use a special OTG MicroUSB Hub splitter, which allows you to connect several devices at once. Here he is:

When connecting a mouse directly via Bluetooth, without an adapter, make sure that this type of connection is connected on your device. Then wait for synchronization with the mouse. If it did not happen automatically, then in the Bluetooth settings you must manually search for available connections. The tablet will detect the mouse, select it from the list and click "Connect".

How to connect a mouse to a phone

Connecting a wireless mouse to a smartphone is done in exactly the same ways as connecting to a tablet. The same tools are used and the same steps are repeated as in the previous section.

Before proceeding with the wireless mouse settings, you need to decide on the type of connection. At the moment, you can connect the device to a PC or laptop in two ways:

1. Through special adapter that comes with the kit
2. Through built-in laptop Bluetooth

It is worth noting that in the case of a computer, only the first option is suitable, because. Most PCs are not equipped with a Bluetooth module.

How to connect a wireless mouse to a laptop

The most common now are mice with a special adapter. It looks like a small flash drive and is usually hidden in the battery compartment. Devices of this type can be connected to both a laptop and a computer.

The connection process itself is quite simple:

If the cursor does not move, it means that most likely drivers not installed. To do this, install the disk in the drive and run the installation. Most often, it is enough to agree to all the conditions and leave all the proposed parameters during the installation process by default.

In the event that the disk is not included in the kit, you can go to official site developer and through the search to find your model. Then we save the drivers to a computer or laptop and start the installation.

How to connect a wireless mouse without an adapter

A mouse without an adapter allows you to connect to a laptop via its Bluetooth module. Before you start connecting check status bluetooth module. For this:

Now activate the wireless module. You can do this either with a key combination in combination with FN, or select " Include adapter» on the corresponding icon on the taskbar.

It remains only to connect the devices to each other. On the laptop, on the radio module icon, select " Add device". Turn on detection on the mouse so that the module sees it. The procedure is identical to pairing mobile devices.

This completes the connection - everything should work.

Common malfunctions and their elimination

In some cases, after connecting devices, the cursor refuses to move. There are not so many possible malfunctions and most often they are solved quite simply:

1. Most often, the mouse refuses to work for a reason dead batteries. It is enough to replace it and everything will start working.
2. Sometimes it may be necessary driver installation that come with the kit.
3. In some cases, the mouse and adapter require pairing.
4. Should be checked is the adapter included into the USB connector, it may have been hit and dropped or not firmly inserted into the socket.
5. Not excluded connector failure USB. This connection is being tested on a different port.

A wireless mouse gives you more mobility and more free space on your desk. Fortunately, the hated wires are gradually leaving our homes and offices. Using such a device is very convenient, and the connection does not take much time and effort.

How to connect a wireless mouse correctly?

There are two main methods. The first is to connect the receiver, for which you must first insert batteries into the mouse. The receiver does not require batteries as it is powered by the computer via the USB connector. If your system uses a mouse port, you will need an adapter.

The mouse receiver has a USB plug, but with an adapter it can be plugged into the mouse port.

The next step is to connect the mouse to the receiver. To do this, place them side by side, pay attention to the button on the receiver - press it. Then find the tiny button on the bottom of the mouse, which is usually pressed with the tip of a pencil or paperclip. Simultaneously press 2 buttons and hold for 5 seconds at the shortest distance between the mouse and the receiver.

It should be said that on the latest models of mice, this procedure will not have to be done - they are ready for use immediately after unpacking.

After connecting a wireless mouse to or a PC, you need to find a permanent place for the receiver - it should be no further than 2.7 meters from the mouse. For example, you can install it on a monitor, the back of a laptop screen, on a system unit, or simply on a table.

Be sure to restart your computer if you connected through the mouse port. If the connection was made directly via USB, you can immediately start using the mouse. And to customize the mouse for yourself, use the software disc that comes with the mouse or download the software from the manufacturer's website.

If you don't know how to connect an optical wireless mouse to your tablet, use the second method. Start again with the batteries, then turn on the bluetooth and make sure your device is detected (the LED on the mouse starts flashing). Follow the instructions on the screen. Customize the mouse settings for yourself and you can safely start using it.

For more convenience, consider purchasing a wireless mouse and keyboard at the same time. In this case, you can pick them up in the same design. Connecting the keyboard is similar to connecting a mouse - the process is quite simple.