Why PC does not come out of sleep mode. The problem of sleeping Windows mode: basic questions and solutions. Why does the computer spontaneously leave the "Sleep" mode

Or "clean" installation. Laptops and computers can spontaneously and "fall asleep", and "wake up." But basically the problem is that Windows 10 does not come out of sleep mode. This case has several basic solutions.

What is sleeping and hibernation

Scheme data were designed specifically in order to save battery charge, translating computer devices to low power consumption mode.

When exit, all active applications and documents are saved. The user after a certain period of time can work with them without losing important information (for example, after the lack of in the workplace). But in Windows 10, problems with setting up such transitions are more common than in the ranks below. Consider several ways to exit the situation.

How to Disable Sleeping Mode in Windows 10

The easiest and most logical solution of the problem is the deactivation of sleep mode. This also applies to cases where the system spontaneously goes into sleep mode, and situations where it cannot leave it.

To disable hibernation, enter the standard "control panel" (you can use the Control command in the "Run" menu, called the Win + R keys) and select the power supply there. In laptops, you can access these settings through the click on the battery icon in the system tray.

In the current plan settings, there is a special field that is responsible for transferring the computer to sleep mode. How to disable sleep mode in Windows 10? Yes, simply opposite this line you need to remove a tick and save the changes.

In the case when the hibernation is still needed, the question may arise how to change the time of sleep mode. The setting is performed in the same section in the Display Disconnection field. In additional parameters, you can set the time interval of the system inactivity, after which hard drives will be disabled. The output of the sleeping mode of Windows 10 can be carried out when manifesting any actions (pressing the keys, the mouse touch, in laptops - opening the lid, etc.).

The setting can also be made if you use the parameter section from the Start Main Menu, which is the second option "Control Panel".

Windows 10 does not go out of sleep mode: disable fast launch

However, the actions above, when the hibernation mode should be able to use necessarily, do not always help, and a computer or laptop with enviable persistence "wake up" does not want.

To eliminate such problems, in the same section, you should use the Power Supply Button string located on the left side of the screen. At its discretion, for a button or action with a lid, you can disable all fields, but most importantly - from the row of the recommended switching on the quick launch in the completion parameters you need to remove the "bird", after which save the changes made.

Checking the relevance of video mode

But this problem is not exhausted. Very often the reason that Windows 10 does not come out of sleep mode, there may be problems associated with the video card. In particular, it concerns the conflicts of drivers. And here too, there may be several solutions.

In the most primitive case, you can simply try to make an input to the Device Manager (or from the Control Panel, or from the Computer Administration section, or simply the DevmGMT.msc command in the "Run" menu.

Here you need to find the installed graphics adapter, call the right click and use the driver update string. At the same time, you should specify an automatic search. The system itself will find the most relevant data and update them.

In some cases, it can be reported that the current version is installed. For complete confidence, you can use specialized utilities like DRIVER BOOSTER. If the list of devices for which there are updates, the video card will not, it means that the problem is different.

Restoring the video card driver to the previous version of Windows

It may well be that the installed driver, although it is designed to work in the tenth version of Windows, nonetheless does not meet all the technical requirements of the system or simply is unfinished. In this case, you can restore the driver that was installed in the previous one ("seven" or "eight").

To do this, ask as in the previous situation, only instead of the automatic installation you need to search for drivers on the local computer. After successful search and installation, the terminal should be reloaded.

The second way to roll back video

Another method of restoring the previous version of the video driver is to use the properties item from the context menu when you right click on the adapter in the Device Manager.

There is a special rollback button. Click it, waiting for the end of the process and reboot the system.

Using Mei.

If, after such actions, Windows 10 does not come out of the sleep mode, it is worth paying attention to such a component as Intel Management Engine Interface, or rather - its version.

On the manufacturer's website in the download section (downloadcenter.intel.com) in the driver list you need to find the one that is required to install, considering and download it. After unpacking the archive, you should sequentially log in to the Installers folder - ME_SW_MSI - PRODUCTION. The last directory contains the setupme.exe installation file, which should be launched with administrator rights, wait for the installation process and restart the system. The problem should disappear.

Instead of pre-school

It remains to add that this is not all the causes of the appearance of such a type of failure, as well as a list of possible solutions to the problem. Separately, it is worth paying attention to the additionally installed utilities or programs that have access to the power parameters. Most often, these are related utilities for non-standard multimedia keyboards, control panels with advanced features for graphic adapters (mostly for ATI Radeon and NVIDIA), some additions to audio cards, not counting complex specialized computer management software. It is very likely that the problem can be enclosed in them. Therefore, it is highly recommended to check their settings, and if after bringing them to order the problem will not disappear, such additions should be removed in general (as a last resort - download newer versions).

Also worth paying attention to some optimizator programs. Often there are also modules for automatically adjusting the power parameters that are different from those installed in Windows by default.

Finally, that for laptops, which for stationary terminals, the inability to exit the system from the hibernation mode can be associated with the overheating of the power supply or even clogging. Here you have to spend it test for troubleshooting. If it turns out that something is wrong with him, this unit is best replaced.

And, of course, there were no problems of the physical level associated with the motherboard itself, because even a slight waste of contacts when installing equipment on it can also lead to the emergence of a set of problems associated with the power supply system.

Some users after the update or clean installation of Windows 10 are surprised to find that their computer cannot complete or exit sleep mode. The problem occurs on devices of different manufacturers: HP, Acer and Asus. You can try to solve the problem in one of the following methods.

Method 1 - Disable Quick Start

In some cases, it is enough just to disable the quick start function. For this:

• open the "Power" menu;
• on the left, press "Action Power Button";

• click "Changing the parameters that are not currently available";
• below, remove the daw with the option "Enable Quick Start (recommended)" and save the changes.

Please note that disconnecting this function can slow down the system start after the computer is turned off.

Method 2 - Update Intel Management Engine Interface (MEI)

The first way helps, but not always. If your computer with Intel inside, the problem may be caused by an error in the Intel Management Engine Interface driver. In my case, the culprit was version 11, which is installed on many PCs.

To solve this irritant problem:

• visit the Intel download center and download the earlier version of MEI than V.11 (I used version 10.0.38.1036, which is available at this address);
• remove the contents of the archive ME_WIN7_8.1_10.0.38.1036_5m.zip, go to Installers\u003e ME_SW_MSI\u003e PRODUCTION And run the file. Setupme.exe.;
• follow the on-screen directions, you agree to replace the driver of an earlier version.

In my case, the problem was solved and the completion of the computer began to occur correctly. I hope one way will help you.

Excellent day!

If you do not want to complete the work with the computer completely, you can translate it into sleep mode, the output from which is performed quite quickly and while saving the last session. In Windows 10, this mode is also available, however, sometimes users face the problem of exiting it. Then only forced reboot helps, and as you know, because of this, all incomplete data will be lost. The causes of this problem are different, so it is important to choose the right decision. It is this topic that our today's article will be devoted.

We have allocated all the options for the correction of the problem under consideration from the simplest and effective, to the most difficult to make it easier for you to navigate in the material. We will touch on it today are different parameters of the system and even turn to the BIOS, but I would like to start to turn off the mode "Quick Run".

Method 1: Disable "Quick Start" mode

In the settings of the WINDOVS 10 power supply plan, there is a parameter "Quick Run"allowing you to speed up the OS start after completion. In some users, it causes conflicts with sleep mode, so it is necessary to disable it for the purpose of checking.

Translate PC to sleep to check the effectiveness of the process just performed. If it turned out to be unsolved, you can return the setting back and move on.

Method 2: Adjusting Peripheral Devices

There is a function in Windows that allows peripheral equipment (mouse and keyboard), as well as a network adapter to output a PC from sleep mode. When this ability is activated, when you press the keys, the user button or the transmission of the Internet package, the computer / laptop is awakening. However, some such devices may incorrectly support this mode, because of which the operating system does not work normally.

After the output of the waiting mode for devices is prohibited, you can try again to output PCs from sleep.

Method 3: Changing the hard disk shutdown parameters

When you go to sleep mode, not only the monitor is turned off - some extension boards and hard disk are also moving to this state after a certain period of time. Then the food to HDD ceases to flow, and when it comes out of sleep, it is activated. However, it does not always happen, which causes difficulties when the PC is turned on. It will help to cope with this error. Simple change in the power plan:

With this power plan, the power supply on HDD will not change when switching to sleep mode, so it will always be in working condition.

Method 4: Check and update drivers

Sometimes there are no necessary drivers on the PC or they were installed with errors. Because of this, the work of certain parts of the operating system is distinguished, and it can also affect it the correctness of exiting sleep mode. Therefore, we recommend moving into "Device Manager" (on how to do this, you have already learned from fashion 2) and check all items for the presence of an exclamation mark near the equipment or inscription "Unknown device". When they are presented, it is worth updating the wrong drivers and set the missing. Useful information on this topic, read in our other articles on the links below.

In addition, this particular attention should be paid to the DriverPack Solution program to those who do not want to do independent search and installation of software. This software will do everything for you, ranging from system scanning and ending with the missing components.

Problems with video card work also provoke the appearance of the problem under consideration. Then it is necessary to separately search for the causes of malfunction and further correction. Do not forget to check for updates and establish them to need.

Read more:
AMD Radeon / NVIDIA Video Card Drivers Update
Correct the error "VideoRerier stopped responding and was successfully restored."

Method 5: Changing the BIOS configuration (Award only)

We chose this way the latter, because not every user before faced with work in the BIOS interface and some do not understand its device at all. Due to the differences in versions of BIOS, the parameters in them are often located in different menus and are even called differently. However, the input principle of the basic I / O system remains unchanged.

In modern motherboards with AMI BIOS and UEFI, a newer version of ACPI Suspend Type has been installed, which is not configured as described below. It does not arise problems when leaving the sleeping mode, so the owners of new computers this method is not suitable and is relevant only for Award BIOS.

Being in Bios, you need to find a section called "POWER MANAGEMENT SETUP" or simply "POWER". This menu contains a parameter. "ACPI SUSPEND TYPE" And has several possible values \u200b\u200bresponsible for power saving mode. Value "S1" responsible for disabling the monitor and information drives when switching to sleep, and "S3" Disables everything except RAM. Select another value, and then save the changes to click on F10. After that, check whether the computer now comes out of sleep.

Disable sleeping mode

The methods described above should help understand the fault that has arisen, but in isolated cases they do not bring the result, which may be associated with critical failures in the operation of the OS or poor assembly, when a non-license-free copy is used. If you do not want to reinstall Windows, simply disconnect the sleep mode to avoid further problems with it. Expanded Guide to this topic read in a separate material further.

IF You. suspend. Your Computer, Then Try to Resume It, You May Find That It Does Not Work As You Expected. This Could Be Because Suspend Is Not Supported Properly by Your Hardware.

The computer cannot get out of the waiting mode

If you press the mouse button or the computer keyboard, which is in standby mode, it must "wake up" and show the password input screen. If this did not happen, try pressing the power button (do not hold, but simply press once).

If This Still Does Not Help, Make Sure That Your Computer's Monitor Is Switched On And Try Pressing A Key On The Keyboard Again.

As the last tool, turn off the computer while holding the power button pressed 5-10 seconds. At the same time, you will lose all unsaved results of work, but you can then turn on the computer again.

If it is repeated every time the computer is translated into a standby mode, then this mode may not work on your hardware.

If the voltage is lost in the power grid, and the computer is not equipped with an alternative power source (for example, a battery), it will turn off.

My wireless connection (or other device) does not work after the "Awakening" of the computer

If You Suspend Your Computer and then Resume It Again, You may Find That Your Internet Connection, Mouse, Or Some Other Device Does Not Work Properly. This Could Be Because Does Not Properly Support Suspend. This is A. pROBLEM WITH THE DRIVER AND NOT THE DEVICE ITSELF.

If the device is equipped with a power switch, try to turn it off and turn it on again. In most cases, it will start working again. If the device is connected via a USB or other such cable, try disconnecting the device and connect it again and see whether it will earn.

If You Cannot Turn Off OR UNPLUG THE DEVICE, OR IF This Does Not Work, You May Need to Restart Your Computer for the Device To Start Working Again.

Many users after a clean installation of the OS or update to the next edition found that Windows 10 does not leave the sleep mode and the computer does not turn off. This problem occurs on devices of various brands. You can try to solve such a problem in several ways.

The first way to solve the problem: Using parameters

The first and easiest way to solve the problem, when Windows 10 does not leave the sleep mode or the PC does not turn off, is to disable the quick start function.

To do this, click "Start" and choose the "control panel". Go to the "Equipment and Sound" section. Click "Power supply". Next in the left menu, click "Action Power Button". In the section click on "Setting the Power Circuit"

A new window will open. Here you need to remove the mark with "Enable Quick Start".

IMPORTANT! After turning off this feature, the completion of the PC will be slowed down.

We solve the problem using MEI download

If you prefer the manufacturer of the Intel PC components, the problem with sleep mode or shutdown Windows 10 may be related to the Intel Management Engine Interface driver, or rather with its version.

Therefore, go to the site of the manufacturer, where by the https://downloadcenter.intel.com/search?keyword.intel.com/search?Keyword\u003dintel+Management +Engine presents a list of drivers. Select the system required in accordance with the discharge. Download the file and unpack it. Go to the address: Folder "Installers", "ME_SW_MSI", "Production" and launch the file "setupme.exe".

After installing the driver reboot PC. The problem will be solved.

Setting the Hibernation and Sleep Mode

If you encountered an error when the laptop does not go out of sleep mode in Windows 10 and the black screen glows constantly, it is worth making changes to sleep mode (hibernation can be exhibited). To do this, perform the following actions:

• Pull the laptop battery. Disconnect it from the network. Let's take a break for 5 minutes. Turn on.
• Click "Start", "Parameters", "System". In the menu on the left, select "Power and Sleep Mode".

• You can set the time later the laptop will switch to sleep mode. And if you click on the "Advanced Power Parameters" link, then sleep mode can be turned off at all by setting all components the value "No" when you go to sleep mode.

• The same settings can be found by going to the "Control Panel", "Power Supply" and selecting "Setting the Power Scheme", then "Change Additional Power Parameters".

• It is worth noting that if you turn off sleep mode, the laptop will work from the network until the battery sees.

Solve the problem if the black screen and the laptop does not come out of sleep

Even if sleep mode you are turned off, then in idle mode, the laptop screen becomes black. The laptop continues to work, hear noise from the fan and hard disk. To solve this problem, you should perform the following:

• Turn off the device by pressing the power button.
• After you re-enable the laptop, you should click "Start" and enter the "Screensaver" request to the search line. Select "Change the screensaver".

• A new window will open. Go to the parameters of the screensaver and completely turn it off.

It is important to note that often a black screen is associated with video card drivers. Therefore, if you encountered this problem, you should roll back or update the video device. First, we recommend that you roll back and only then update.

To do this, go to the "Device Manager" and choose the Videoparter branch. Click on the item right-click and select "Properties".

A new window will open. Select "roll back" or "update". If you are going to update the software, it is worth downloading drivers in advance from the manufacturer's official website. Otherwise, the system will install a universal driver.

IMPORTANT! If there are no compatible drivers with Windows 10, it is worth installing a working software (which previously worked on Windows 7 or 8) in compatibility mode.

Also can help solve the problem disabling the wake-up timer.

To do this, click on the right mouse button on the video adapter icon. Select "Properties". Go to the "Power Management" tab and remove the "Allow this device to output a PC from sleep mode".

Or you need to go to the "Control Panel", "Power", "Changing the Power Scheme Settings" and click the "Change Advanced Power Parameters" link. In the "Sleep" branch, we find a "awakening timer" and set it the value "disabled".