Frequency grid TK F6 Turbo. Kenwood TK-F6 Turbo is a portable high-power warning. Timer Limiting Transmission Time, Emergency Call, PTT ID Function

A new powerful professional portable radio station operating in the range (400-480 MHz), compact dimensions, a new modern design that has an output power up to 9 W! High sensitivity of receiving transmitters, allowing to obtain exceptional clean radio at the limit range (up to 40-50 km in direct visibility with highly installed stationary antennas). A large and high-quality speaker provides a clean audibility even on the marginal volume without distortion. Extensive functionality can meet the needs of almost any user, while the entire extensive functionality is hidden inside the station, most functions are programmed through the computer, the necessary functions can be displayed on two programmable buttons, otherwise nothing superfluous!

We present to your attention a high-tech, multifunctional, compact, professional portable warfare with a powerful Li-Ion (lithium) battery 3000 mAh - Kenwood TK-F6 Turbo

Kenwood TK-F6 Turbo New Professional Wired Radio Station with High Efficient Antenna, which is easily lightning. High-strength lightweight case with a modern design and output power up to 9 W in the range in the range of 400-480 MHz. Thanks to constant improvements in technology and full compliance with eleven Military standards MIL-STD 810 C / D / E / F and IP 54/55, the radio is capable of working in hard conditions: rain, fog, low and high temperatures, vibration. Allows you to take even the weakest signals, at a low price this sets this model to the leading places among professional wearable racies of this class!

Portable radio station comes in a cardboard box (see photo below)

Cases of Kenwood TK-F6 Turbo provides a greater range compared with other models, due to better sensitivity and selectivity up to 3-7 km in the city or in the forest, up to 10-12 km in the field and up to 40-50 km in direct visibility with highly installed stationary antennas. Due to the improved selectivity, the receiver works better in difficult conditions in places of cluster of a large number of people with radio stations of this frequency range. For example: a large enterprise, a large construction site, storage facilities, a shopping center, the territory of the boarding house, etc.

• Operating frequency range 400-480 MHz (it is possible to expand the range up to 520 MHz)
  Includes the entire LPD range 433.075-434.775 MHz, as well as PMR 446.0-446.1 MHz, FRS / GMRS 462-467 MHz.
• CTCSS and DCS codes - make it possible to align with any LPD, PMR and a professional radio station.

Battery Account Status Poll 10 Values (Allows you to get information about the current battery charge state) Now even the lack of display does not prevent you from getting information about the battery charging level! .

Call Remind). Remind you if you missed a call from the correspondent

Dtmf.

Power Adjustment 1/8 Max 9W (2 modes)

2 Programmable buttons for quick access to frequently used features (for example, one button set the mode of low power to save battery, on the second emergency call)

Compliance, eleven military standards MIL-STD 810 C / D / E / F and IP 54/55 (ability to work in hard conditions: rain, fog, low and high temperatures, vibration, etc.

Disable noise reduction

3 Color Indicator (Red, Orange, Green)

Frequency grid step 12.5, 25 kHz 2 values

VOX is the inclusion of radio swat. (9 values)

VOX DELAY TIME - setting the switching delay.

VOX BEEP - Adjunction of the VOX mode (inclusion in voice).

SQL - Customizable modes of operation of the noise-voltage (9 levels)

Scanning channels. Allows you to track activity on other communication channels and, if necessary, respond to it

Fast battery charge with charge end indication (6 hours).

Accumulator saving mode.

Sound call.

Selective call feature (SELCALL FUNCTION).

Emergency Alarm (Emergency Alarm Function)

Programming with PC.

Block buttons.

128 channels. (8 groups of 16 channels)

Restoration of factory nutrun!

Speech quality improvement system (COMPANDER)!

Talk Back function.

Talk Around function.

Voice Channel Switching Confirmation (can be disabled).

Restricting the time of work on the transfer (from 15 to 600 CEKUND).

Automatic transfer of subscriber identifier (PTT ID.)

Blocking keyboard.

range of operating temperatures -20 / 60 ° C.

dimensions 120x64x48 mm (in sh g).

weight 267g.

Contents of delivery:

№	Name	number
	Kenwood TK Radio Station - F6 TURBO

New Powerful Professional Portable Radio Stationoperating in the range (400-480 MHz), compact dimensions, new modern design, having an output power up to 9 W!

High sensitivity of receiving transmitters, allowing to obtain exceptional pure radio communication on the limit range.

A large and high-quality speaker provides a clean audibility even on the marginal volume without distortion. Extensive functionality can meet the needs of almost any user, while the entire extensive functionality is hidden inside the station, most functions are programmed through the computer, the necessary functions can be displayed on two programmable buttons, otherwise nothing superfluous!

We present to your attention a high-tech, multifunctional, compact, professional portable warfare with a powerful Li-Ion (lithium) battery 3000 mAh - Kenwood TK-F6 Turbo

Kenwood TK-F6 Turbo New Professional Wired Radio Station with High Efficient Antenna, which is easily lightning. High-strength lightweight case with a modern design and output power up to 9 W in the range in the range of 400-480 MHz. Thanks to constant improvements in technology and full compliance with eleven Military standards MIL-STD 810 C / D / E / F and IP 54/55, the radio is capable of working in hard conditions: rain, fog, low and high temperatures, vibration. Allows you to take even the weakest signals, at a low price this sets this model to the leading places among professional wearable racies of this class!

The KENWOOD TK-F6 TURBO Warning provides a greater range compared to other models, due to better sensitivity and selectivity up to 3-7 km in the city or in the forest, up to 10-12 km in the field.
Due to the improved selectivity, the receiver works better in difficult conditions in places of cluster of a large number of people with radio stations of this frequency range. For example: a large enterprise, a large construction site, storage facilities, a shopping center, the territory of the boarding house, etc.

Basic functionality:

• Operating frequency range 400-480 MHz
  Includes the entire LPD range 433.075-434.775 MHz, as well as PMR 446.0-446.1 MHz, FRS / GMRS 462-467 MHz.
• CTCSS and DCS codes - make it possible to align with any LPD, PMR and a professional radio station.
  
• Battery Account Status Poll 10 Values (Allows you to get information about the current battery charge state) Now even the lack of display does not prevent you from getting information about the battery charging level! .
  
• Call Remind). Remind you if you missed a call from the correspondent
  
• Dtmf.
• Power Adjustment 1/8 Max 9W (2 modes)
  
• 2 Programmable buttons for quick access to frequently used features (for example, one button set the mode of low power to save battery, on the second emergency call)
  
• Compliance, eleven military standards MIL-STD 810 C / D / E / F and IP 54/55 (ability to work in hard conditions: rain, fog, low and high temperatures, vibration, etc.
  
• Disable noise reduction
  
• 3 Color Indicator (Red, Orange, Green)
  
• Frequency grid step 12.5, 25 kHz 2 values
  
• VOX is the inclusion of radio swat. (9 values)
  
• VOX DELAY TIME - setting the switching delay.
  
• VOX BEEP - Adjunction of the VOX mode (inclusion in voice).
  
• SQL - Customizable modes of operation of the noise-voltage (9 levels)
  
• Scanning channels. Allows you to track activity on other communication channels and, if necessary, respond to it
  
• Fast battery charge with charge end indication (6 hours).
  
• Accumulator saving mode.
  
• Sound call.
  
• Selective call feature (SELCALL FUNCTION).
  
• Emergency Alarm (Emergency Alarm Function)
  
• Programming with PC.
• Block buttons.
• 128 channels. (8 groups of 16 channels)
• Restoration of factory nutrun!
  
• Speech quality improvement system (COMPANDER)!
  
• Talk Back function.
• Talk Around function.
• Voice Channel Switching Confirmation (can be disabled).
• Restricting the time of work on the transfer (from 15 to 600 CEKUND).
• Automatic transfer of subscriber identifier (PTT ID.)
• Blocking keyboard.
• range of operating temperatures -20 / 60 ° C.
• dimensions 120x64x48 mm (in sh g).
• weight 267g.

programming.

Coding / decoding CTCSS / DCS. When this feature is enabled, you can hear and take

calls only when coincided code CTCSS / DCS.. Calling stations, even working on the same channel, with

other values \u200b\u200bof codes or without encoding, you will not accept.

Exists 50 values \u200b\u200bof tonal code Ctcss. (67.0 - 254.1 Hz). It is possible independently

determine these encodings in the interval 50 - 260 hz in step 0.1 Hz..

Exists 232 Digital code DCS. (017N - 765L).

Optional DTMF signal. It is possible to determine the DTMF signal for each channel by

programming.

This feature is similar to coding CTCSS / DCS. and implements such functions as: Selective challenge,

Group call, PTT IDremote disconnection and inclusion.

1. PTT ID

: If the channel is defined PTT IDThis information will be transmitted when working on

channel when pressed and release PTT.. Stations that have a similar function and display will be

display this PTT ID (Caller ID) when taking a call.

By programming, you can create groups and organize group challenges by template

symbols A, B, C, D, "*", "#").

Now the caller can cause various groups by transferring different group

codes. When the host receives Id code, one or all code characters are compared with

the template, on the basis of what happens or does not happen to call. Thus are implemented

group or selective calls.

Group code: C..

ID code :

C23., Say station Radio A. and Radio B..

If the caller uses the code when calling CC5, Say station Radio C. and Radio D..

If the caller uses the code when calling CCC.will answer all stations.

The radio has 16 group Dtmf. Codes that can be flexible enough and use.

Installing CTCSS / DCS and DTMF Signal Combination.

You can set the logic of the combination of signals CTCSS / DCS.and Dtmf. (by programming).

: The station responds to incoming calls only when coinciding and encoding CTCSS / DCS.and signals

: The station responds to incoming calls when the coincidence of any of these signals.

Time limit (TOT). The purpose of this function is to limit the time of continuous transfer to

channel (prevents the battery quick discharge and the possible overheating of the output cascade). For

exceeding a certain in advance, the station will turn off the transmission and notifies the audio signal.

Function itself Tot. And the maximum transmission time is set by programming.

You can configure this function by programming.

Energy Sailing Mode (Battery Save Setup). With the function enabled, the station will reduce

energy consumption in the state of inaction: no signal is accepted, no

actions, etc.

Frequency Band Expand (Frequency Band Expand). By programming frequency

the range of radio can be expanded to the interval. 400 - 520 MHz.

On off. Reset Functions (Reset Function ON / OFF).By programming can be allowed / banned

using a function Reset.which allows you to return the factory appliance settings.

RESUME FACTORY DEFAULT (RESUME FACTORY DEFAULT).Restore the factory settings has

meaning when the station begins to work inadequately, etc. To do this, when the radio is turned off, press and

hold the buttons PTT. and PF2. More than 3 seconds, then release. Sign of recovery factory

the settings will be the message number of the current channel.

Note: The function must be turned on by programming. See before. paragraph.

Kenwood TK F6 turbo - pocket radio, which is a continuation of the line by all the famous UVF-1 Turbo. Kenwood TKF6 Turbo station is represented in a strong and ergonomic case. A new powerful professional portable radio station Kenwood TK-F6 turbo has an output power up to 9 W, operates in the range (400-480 MHz), has compact sizes, new modern design!

Thanks to the constant improvements in technology and full compliance with eleven Military standards of MIL-STD 810 C / D / E / F and IP 54/55, the radio is capable of working in hard conditions: rain, fog, low and high temperatures, vibration allows you to take even the weakest signals , at a low price, this puts this model to the leading places among professional wearable racies of this class!

All Kenwood TK F6 TURBO settings are programmed using a PC, it is possible to install 16 memory channels with subtons and frequency data, also to 2 functions (short and long pressing) can be installed on each of the three additional keys, which allows you to change the power level and check the charge level Battery with one button. Voice prompts in English are voiced by all actions with a radio station of Kenwood TK-F6 Turbo (Channels, Enable / Disable Functions), which makes the station convenient in operation. The TK-F6 TURBO radio supports the PTT ID function, which allows you to install a unique tone identifier for each station.

Kenwood TK F6 Turbo radio station was created in a compact lightweight case and weighs quite a bit However, the Kenwood TKF6 TURBO radio battery has a capacity of 3000 mAh. It is a reliable communicative device concluded in a convenient case without display, for ease of use in adverse conditions. Kenwood TK-F6 Turbo New Professional Mobile Radio Station is equipped with a highly efficient antenna that is easy to sleep.

A large and high-quality speaker provides a clean audibility even on the marginal volume without distortion. Extensive functionality can meet the needs of almost any user, while the entire extensive functionality is hidden inside the station, most functions are programmed through the computer, the necessary functions can be displayed on two programmable buttons, otherwise nothing superfluous!

User's Manual.

Using the battery.

Battery charge.

The rechargeable battery is supplied not charged. Before use, charge it.

New battery (either after long-term storage) when first charging may not show the nominal

capacity. To achieve the nominal capacity, repeat the cycle charge-discharge 2-3 times. If time

the work of even a fully charged battery is small, it's time to change it.

Charger.

Use the battery for the battery only the charger is included with this waters. If a

after installing the battery, the station "shows" a low charge ("blinking" of the red indicator and

Notes:

Do not closure the battery terminals and do not have it close to the source of fire. Never

do not attempt to disassemble the battery. We do not carry any about

tweets for any

results caused by changes in battery without permission from our company.

Battery charge should be made at ambient temperature 5 - 40 C. For

the battery may not be fully charged within the limits of this temperature range.

Charge the battery only when the radio is turned off, otherwise it is possible incorrect

charging.

Also in order to avoid problems with the correctness of the charge, do not turn off the power and not

deliver the battery during the charge.

Do not attempt to rearly charge a fully charged battery, it can lead to

reduce its resource or to failure.

Do not attempt to charge the battery, if it or the wet warrant itself. To start drying

devices.

In order to avoid closure of the battery and the output of it, do not put it together with

metal objects like keys, chains, etc.

How to charge.

Insert the power adapter into the outlet and

connect to the charger.

The indicator will first be orange

(approximately 1 s), then it will become green

(charge standby).

Put the battery or war with

battery in a charger.

Make sure that there is a reliable

contact terminals of the device in the charger

glass. The indicator will "flash"

red (condition

prerequisite).

Approximately after 5 min indicator

stop "flashing" - this is a state

normal charge.

For a complete charge requires approximately 6.5 hours. When the green indicator turns on, it means that charging

completed. Remove the battery (or radio) from the charging glass.

Note: If the transceiver is enabled with the battery installed in it, the indicator

will not be green. The correct indication is possible only when the station turned off is charged.

Charge process and indicator status.