Close windows 10 update window

Today we are going to share 7 ways on how to disable Windows 10 update! Automatic updates of the Windows 10 system will no longer interfere with you!

Windows Update is an important component and part of the Windows operating system. It regularly checks Microsoft servers for available updates, patches, and device drivers. If any are found, he informs about it and offers to download and install them. This is very important as updates improve system performance, reliability, stability, and security.

It is no secret that Windows XP, Vista, 7 and 8 / 8.1 allow you to customize the behavior of the Update Center: you can download and install updates either automatically or manually, you can choose which updates should be installed and which not; you can even turn off the check for updates completely. This allows you to make a decision about the advisability of installing certain updates and at the same time makes it possible not to clog up the bandwidth of the Internet channel once again when it comes to slow connections.

With Windows 10, however, Microsoft left users with no choice - the Pro edition only allows you to delay the installation of updates for a while, while Windows 10 Home users are not even allowed to.

In other words, the new version of the operating system downloads and installs updates automatically and without notifications. It would seem that there is nothing wrong with this, but in fact it is not at all so, because often updates cause various problems. Sometimes it even comes to the point that after installing the next batch of patches, the system simply stops loading.

Fortunately, Windows 10 still has the ability to block or manually download updates. Below are all possible methods that will work in all editions of the OS: Windows 10 Home, Pro, etc.

So let's not waste any time and find out how you can take control of the system update process.

Method 1: Configuring Windows Update using the "Advanced options" section (Not for Home edition users)

This method will allow you to configure Windows Update to delay the automatic download of some updates for at least some time, and to prevent the computer from restarting automatically. However, you cannot disable or block updates using this method.

Method 2: Disable automatic loading of device drivers

The new system still allows you to prevent the automatic download and installation of drivers. Here's how to do it:

After that, Windows will always look for and install drivers from the computer, and the system will only contact the Update Center if a suitable driver is not found on the hard disk.

Method 3: Hide updates with the official Show or hide updates tool

Even before the official launch of Windows 10, Microsoft released a program that returns to the system the ability to hide unwanted driver updates or system updates.

Method 4: Set Wi-Fi internet connection as metered

This is another workaround to prevent Windows 10 from automatically downloading and installing updates. To prevent the system from downloading new updates, you just need to set up your internet connection as a metered connection.

That's all. Now the "ten" will not automatically download and install new updates as long as your Internet connection is listed as a metered one.

Method 5: Group Policy Settings (for Pro) or Registry

Now let's talk about advanced methods.

Although Microsoft has removed the ability to manage update downloads, update settings via Local Group Policy Editor and Registry Editor still work.

I note right away that intervention in group policies is not available for Windows 10 Home users, however, if you have a Pro version, you can enable either download and install notifications, or automatic download and installation notification, or automatic download and installation on a schedule.

But there is one caveat. Because Microsoft has completely replaced the old Update Center with a new modern application, Group Policy settings or registry tweaks do not take effect immediately. Even after restarting your computer or running the gpupdate / force command, you will not see any changes in the Windows Update window. That is, if you open the update settings, you will find that the "Automatic (recommended)" option is still enabled there.

So how do I force Windows 10 to apply our Group Policy or registry change? It's actually very simple. You just need to click the Check for Updates button in Windows Update.

As soon as you click this button, the system will immediately apply the changes, and when you open advanced options in Windows Update, you will see that the new settings have been successfully applied.

So let's make some changes to the Local Group Policy Editor.

By choosing the latter option, you will be able to select options from the drop-down list on the Windows Update settings page.

By choosing the first option, when new updates appear, the system will notify you about them with help, and when you click on such a notification, a Windows Update window will open with a list of new updates and the ability to download them.

If you need to turn off updates completely, then the Registry Editor will help you with this.

To return everything as it was, simply remove the NoAutoUpdate parameter or set the value (zero).

Method 6: Disable Windows Update Service

Another method that allows you to block 100% downloading and installing updates in Windows 10.

That's all. Now, when trying to check for updates, the Update Center will give an error message 0x80070422.

Method 7: third-party utilities

Windows Update Blocker is a simple, free, no installation tool to disable / block updates in Windows 10 with the click of a button. In fact, the utility is a more convenient alternative to method number 6, since it allows you to stop or enable the Windows Update service without having to open the service manager.

To disable updates using Windows Update Blocker, you just need to activate the "Disable Service" option and click the "Apply Now" button. The utility is compatible with previous versions of the system up to XP.

Windows 10 Update Disabler is another effective tool to combat automatic updates in the Top Ten. Unlike the previous utility, Windows 10 Update Disabler does not disable Windows Update, but installs its own service on the system, which runs in the background and prevents Windows Update from downloading and installing anything.

According to the author, his solution uses some kind of undocumented system call that checks the current state of Windows Update and prevents its processes from running. In addition, the Update Disabler service disables all scheduled Windows Update tasks, including the one responsible for automatically restarting the system to complete the installation of updates.

Note: your antivirus might consider the application as malware.

To install Update Disabler, go here and download the archive with the program. Extract the UpdaterDisabler.exe file from the archive into a folder and directly from it, go to the "File" menu, run the command line with administrator rights. Next, enter or copy and paste the UpdaterDisabler -install command into the console window and press Enter.

All the service is installed and running, no more updates will bother you. Use the UpdaterDisabler -remove command to remove the service.

You can use any of the above methods, but remember that it is not advisable to disable or block updates, especially at this stage, when Windows 10 is not sufficiently stable and protected from threats.

Have a great day!

After upgrading to the new Windows 10, many users have tried to opt out of all of the following automatic updates. The operating system not only automatically downloaded updates, but also installed them after a while. Compulsory voluntary installation of updates is observed in the system now, it's good that now it is possible if necessary.

This will tell you how to prevent the update of Windows 10. Users have already come up with many different ways to disable automatic updates. If the update is downloaded and is waiting for the computer to restart for installation, you can. Users can simply disable the update service in Windows 10 to disable updates.

In order to disable the update service, click on Win + R, and run the command services.msc... In the services window that opens, find the service Windows Update... Double click on it and in paragraph Launch type set the value Disabled... Also, don't forget to stop the service right now and apply the new settings.

After these steps, the update service will be successfully disabled and Windows 10 will not be able to automatically download and install updates. Additionally, see other methods. Since the way services are managed has changed somewhat since the first versions of the operating system.

Start the local group policy editor by running the command gpedit.msc in the window Win + R.
In the opened group policy editor, go to the path: Computer Configuration> Administrative Templates> Windows Components> Windows Update.
Then change the value of the parameter Configuring Automatic Updates on the Disabled.

Important! If the option to configure automatic updates is disabled, then any updates available in the update center must be downloaded and installed manually.

How to disable updating through the Windows 10 registry

In case on the way HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows You simply will not find the sections you need, you will need to create them yourself. Despite the fact that such a section may not exist by default, after they are created, it turns out that the next Windows 10 updates are prohibited.

Win Updates Disabler

For many users, an easier option would be to download third-party software, and by pressing a few keys completely and successfully disable Windows 10 updates. For this, we recommend using the Win Updates Disabler utility. At the moment, the current version Win Updates Disabler 1.4 which you can download from the official website of the developer. It is also a plus that you can download the portable version of the program without having to install it. in a similar way.

Conclusion

In general, it is not recommended to disable updates, as with each update the operating system becomes more stable and secure. If you need to disable system updates, you can use one of our methods. Another tricky solution is to enable metered connection, which is described in the instructions:.

This article details how to disable automatic Windows 10 updates. You do not always know what Microsoft is slipping into in the next update package, and you cannot refuse to download and install updates in the top ten without using administrative capabilities or special utilities.

By the way, you should be careful with third-party software, because such utilities can perform other operations in the background, in addition to disabling the update center.

Constant downloads of updates and notifications about this, their installation and requirements, the computer will restart, errors that accompany any of the stages, as well as the consumption of precious traffic from users with wireless Internet - these are just the main reasons to refuse automatic Windows 10 updates.

Deactivating Update Center

Let's start with a method that will be more understandable for novice users due to the absence of the need to dig into system tools, and is suitable for any edition of Windows 10.

Note that the following method of disabling updates (using the tool for editing group policies) does not work on the home edition of the Tens - this administration tool is simply absent in the Home version.

The essence of the method is to stop and disable the service responsible for downloading and installing update packages. To do this, we do the following.

1. Launch the "Services" snap-in.

The easiest way to do this is by executing the "services.msc" command through the command interpreter, which is opened using the Win + R hotkey combination.

After that, a window will appear with the name "Services". Its functionality will allow you to disable the automatic start of the service and terminate its operation in the current session.

2. Find the service with the name "Windows Update" (in some editions the English name "Windows Update" may be found) and double-click on the element to call its properties.

3. Click "Stop" to terminate the service.

4. In the "Startup type" drop-down list, select the "Disabled" item.

5. Apply the new system configuration.

Changes take effect without restarting the system. The automatic update of Windows 10 is turned on in the same way: first, we set the automatic start of the service, and then we start it.

Let's use the functionality of the Group Policy Editor

As it was said, this section will not help the owners of the home version of the "ten"; when using Pro and Enterprise versions of Windows 10, this option is recommended to disable automatic system updates.

Let's consider how to disable automatic Windows 10 updates using the administration tool, which is the most reliable method for disabling updates.

1. We execute the command "gpedit.msc".

This is done through the command interpreter, command line or Start search line - the result will be the same.

2. Open the "Computer Configuration" section.

3. In the subsection, go to "Administrative Templates", where we open the "Windows Components" directory.

4. Go to the "Windows Update" directory.

5. Call the "Properties" option "Configure automatic updates".

6. Move the switch to the "Disabled" position.

7. Click "Apply" to write changes to the Windows 10 registry.

8. Close the tool window and check for updates.

If they were detected in manual mode - this is the norm, the new settings may work in a dozen or two minutes, although the automatic check for updates is disabled immediately after the check for updates is turned off.

The result will be similar if you go to the registry key HKLM \ SOFTWARE \ Policies \ Microsoft \ Windows WindowsUpdate \ AU and create a DWORD key in it with the name “NoAutoUpdate” and the value “1”.

Use of metered traffic

One of the “dozens” updates added an option to its functionality, the activation of which prevents the download of updates when using a wireless or other method of connecting to the network, the traffic of which is limited. This function allows you to indicate that the Wi-Fi connection in use is metered, even if it is not.

The method works on all editions of Windows 10.

1. Go to "Options" and open the section that provides access to the network settings.

2. Go to the Wi-Fi tab.

3. Expand "Advanced Settings".

4. Activate the item "Set as a metered connection" so that the operating system considers the connection with paid or limited traffic.

Apps to quickly disable the automatic update function

Many are familiar with applications for disabling spyware functions in the top ten. But such programs also exist to disable the auto-update function of the operating system. Sometimes one application combines both functions.

One of these utilities is called Win Updates Disabler. To avoid problems, download the application from site2unblock.com and check the downloaded file with an online scanner, for example, on the VirusTotal website.

Working with the portable program is simple: launch it, tick the first item "Disable Windows Updates" and apply the settings. Administrator privileges are required for the program to function.

About five of these annoying Windows updates, how they got me ... The hand itself reached for the mouse to disable this damn function, to prevent them from being installed on my computer once and for all. But ... in Windows 10 there is no button to disable checking for updates: not provided.

What the hell is this? How dare they? Why??? Why??? Yes, I have them ... Stop! Let's cool off. This is not done to annoy the user, but for quite objective reasons. And the problem is solved very easily. Today I will tell you how to disable Windows 10 update in several ways, whether it is worth doing it at all and why the "soft" ones are trying to deprive us of this opportunity.

Why Windows should be updated

The operating system is a complex digital "organism" - holistic and self-sufficient. But sometimes gaps are found in its "armor" - vulnerabilities that hackers and malware creators use for their own nefarious purposes.

There is a constant race between OS developers and virus creators - who will find such a loophole ahead. And if the former strive to quickly close it, releasing an update, then the latter - to put themselves at their service in order to profit from you and me.

The more complex the system is, the more vulnerabilities it has. Are there many of them in Windows? It's just unrealistic a lot. This is evidenced by at least the fact that the release of updates has been going on throughout the entire existence of Windows, more precisely, while its specific version receives support. That is, the main purpose of installing updates is your safety, and what the refusal of them sometimes leads to, we told in.

And yet, what makes users refuse to update Windows? Here are the answers I hear the most:

I have a pirate. I'm afraid that activation will fly off.
They spy on me through them.
The specialist advised.

What can I say to this:

Even if the activation fails, which is unlikely, it is easier to run the activator again than paying the burglars a ransom to decrypt your family photo archive.
The purpose of updates is somewhat different, and to be afraid of spyware is not to use Windows at all. There are tons of free open source alternatives out there.
It would be more correct to call such "specialists" pests.

That is, in 90% of cases, refusing to install updates has no common sense.

When is it okay to disable Windows 10 updates

If the update caused the OS or programs to malfunction.
If at the present time stable and fast operation of your computer is extremely important to you, and downloading updates may slow it down.
If you use a metered Internet connection and pay for each megabyte of traffic.
If the system disk is low on free space.

If you disable updates for any of these reasons, after the problem is resolved, be sure to enable them again!

The fastest way to disable updates: prevent the Wuauserv service from starting

The most common thing is to prohibit the “ten” (and the “seven” with the “eight”) from downloading updates, this is to stop and unload the service “ Update centreWindows". The method is also good because it works in all editions of Windows 10.

How to do it:

Start Task Manager and expand the " Services". At the bottom of the window, click the " Open Services».

Go down to the very bottom of the service control window. " Update center"- the second from the bottom. Click on it 2 times with the left mouse button to open " Properties».

On the first tab, open the drop-down list " Launch type"And select" Disabled". If the service is running, click the " Stop».

The same actions can be done faster -. Follow the instructions below in turn (copy, paste, press Enter):

sc config wuauserv start = [space] disabled

net stop wuauserv

To return to the previous setting (enable "Center"), run the following commands:

sc config wuauserv start = [space] demand

net start wuauserv

Instead of demand(run manually) you can enter delayed-auto(delayed automatic start) or just auto(autostart at Windows startup).

Configuring the auto-update prohibition policy

This method works in all editions of the Top 10, except for the home edition, since it does not have a Group Policy editor. However, users of the home version should not be upset about this, because the policy can be written directly to the registry. And below I will show you how to do it.

Let's start with the editor. To open it, run the system utility “ Execute"(By a combination of Win + R or from the contextual Start pen). Let's add a command to it gpedit. msc and click OK.

In the policy editor window:

In the left half of the window, expand the list “ PC configuration» -> « Administrative Templates» -> « ComponentsWindows» -> « Update centre". On the right - click on the line 2 times “ Configuring auto update».

In the parameters section, mark " Disabled"And save the setting. To make it take effect, we reboot the system.

To add the policy of prohibiting updates directly to the registry, run in the command line (written in one continuous line):

reg add “HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Windows \ WindowsUpdate \ AU” / v NoAutoUpdate / t REG_DWORD / d 1 / f

To remove a policy, run the following command:

reg delete “HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Windows \ WindowsUpdate \ AU” / f

I think these methods are more than enough to solve our problem, but if you do not like system utilities, you can use third-party ones that do the same (or almost the same), but through a beautiful window.

Third-party applications to disable Windows 10 updates

Here is a partial list:

(Microsoft's utility for selectively removing and prohibiting the installation of updates, a good help for those who have this process with failures).

All of them are very easy to use, so I will not dwell on each one. I'll show you how to use one of them - the portable program Win Updates Disabler.

Launch, open the tab “ Disable", Mark the first option and press" Apply Now". After restarting the PC, the Windows update center will stop loading.

The main reason why the Windows developers removed the auto-update disable button in the Center settings from the top ten, but left the option to do it in other ways, is, oddly enough, to take care of inexperienced users. Abuse of this function unknowingly led to frequent outbreaks of various cyber infections, which created problems not only for the culprits, but also for innocent neighbors on the network. Indeed, you do not need to use it unnecessarily, because your (and not only) safety is above all.

Switching to a metered connection in the Wi-Fi settings

Left-click on the menu Start and click on Parameters

Wi-Fi network and internet

Extra options

We put the switch in position Set as metered connection

Disable operating system updates completely in the computer settings

Left-click on the menu Start and click on Parameters

Go to the section

Updates and security

Windows Update

We see that there are new updates that are immediately installed on our computer

Click on the button Extra options

In this tab, disable receiving updates:

Choose how to install updates

We set the parameter Notify when a reboot is scheduled

Check the box Postpone updates.

Going back one step to the window

Updates and security

Windows Update

and we see that updates are no longer downloaded and installed automatically, but are waiting for your permissions. Updates installation will start if you click on the button Install now.