Headphones are defined as windows 10 speakers. How to set up a microphone with headphones on a computer and laptop

After installing Windows 10 or updating the system, many users face the problem when the headphones do not work or the system does not see the connected device. This problem is related to missing, damaged or incompatible drivers. To set up headphones in Windows 10, we offer the following methods.

Ways to set up headphones in Windows 10

If you are faced with such a problem when headphones do not work in Windows 10, it is worth checking the following parameters:

Connect your headphones to the front and then to the back of your PC. Check which panel is not working for you.
Check if the outputs are properly connected to the sound card (if you are connecting to the front panel). The outputs may be loose, loose, or not connected at all.
Make sure the correct pinout is set. For example, you connect headphones to the front panel. Windows 10 does not support this type of audio jack connection as AC'97. As a result, the laptop does not see the connected headphones. You need to change the connection type to HD Audio and set up your headphones.

Connect other headphones to your PC. The headset may not be working.
Make sure you have installed frameworks and drivers for the chipset before installing the drivers.

If, after performing these manipulations, the headphones on the laptop or computer still do not work, it is worth updating the drivers. To do this, we perform the following actions:

Press "Win + R" and enter "msc".

Device Manager will open. We find "Sound, game, video devices". Select your sound card and click "Update Driver".

Then let the system find the driver. However, it is worth noting that in this case, the universal software from Microsoft can be downloaded. Therefore, it is worth downloading the Realtek High Definition Audio driver from the developer's website and in the next window click "Search for drivers on this computer".

After installing the driver, it is worth restarting your laptop or PC.
Go to Control Panel and select Realtek Manager (or other programs such as Sound Blaster, Dolby Digital). A new window will open. We select "Additional device settings", which is located in the upper right corner. In the new window, put the checkbox “Separate all output jacks as independent input devices”.

This is to ensure that sound is directed to all input devices, not just the speakers.
Also, in the speaker settings, it is worth checking the "Disable front panel socket detection" checkbox.

If there is still no sound from the headphones, make sure you are playing a supported format. Perhaps you do not have all the codecs installed and the file format is unknown to your player. Install the Windows 10 Codec Pack and retest your headset.

Microsoft's new operating system is good. Compared to previous versions, Windows 10 is faster and more stable. You quickly get used to good things, so users react painfully to new problems with this OS. One of these troubles is the lack of sound in the headphones after installing or updating the operating system. Usually the reason lies in damaged or incompatible drivers, so you shouldn't blame the developers of the new OS. Let's take a look at how to set up headphones on your Windows 10 computer and return music to your headset speakers.

Checking the physical connection parameters

Sometimes no specific action is taken to fix the problem. It is worth checking the primary causes of the problem - perhaps the solution lies on the surface.

Attention! After installing the chipset software, reinstall the audio driver.

Headphone tuning methods

There are two methods for setting up your headphones.

Driver update

This is the main way. 90% of all audio reproducibility issues are related to the problematic driver package.

Press Win + R and enter the devmgmt.msc command in the corresponding field. Confirm the action with the Enter key.
In the "Task Manager" we find the sound card, right-click on it and click "Update driver".

Attention! Windows might install a generic audio driver that might not work. So go to the developer's official website and download the latest compatible driver.
In the window that appears, select the option "Search for drivers on this computer" and browse the path to the downloaded file.
Reboot your system.

Configuring Realtek Manager

If the driver updates didn't help, go to the second method.

Open Control Panel and select Realtek HD Manager (could be Dolby Digital or Sound Booster).
In the window that appears, click "Additional device settings".
Select “Share all output jacks as independent input devices”. Confirm with OK.
here .
Physical damage to connectors or sound card. In this case, you need to contact the service center.

That's all. Now you know how to set up headphones in Windows 10 and diagnose the root cause of the problem.

Not always a new headset to the computer, after connecting the plug to the desired connector, starts working automatically. Often, in different operating systems, additional manipulations are required to activate the device. Let's figure out how to set up a microphone on the headphones and then check its performance via Skype or another program.

Plugs variety or wrong connection fix

Before buying headphones, check how many audio and microphone jacks are in your system unit. Modern computers and laptops have a combined jack that transmits both signals through one input.

Older system units have separate microphone and headphone jacks. In such a situation, you need to purchase a headset with two plugs. They will be of different colors:

pink or red - microphone;
green - headphones.

Recommendations: How to set up headphones for high-quality sound
How to set up the equalizer correctly (for headphones)
How to make a microphone from headphones

They must be connected to the computer by color in the corresponding sockets. If you bought a headset with one wire, and you need a model with two wires on the system unit, you can buy a special adapter. On the one hand, it will have an input for a combo jack, on the other, two outputs with plugs of different colors. The cost of such a cord varies between 300 - 500 rubles.

Connection and setup sequence

When the headset is plugged in, you need to check if the sound and microphone are working. With the first option, everything is simple, just turn on the music. The second is a little more complicated. To test the performance of the microphone, you can use:

1. Classic voice recorder, which is installed on any OS. Usually in Windows, the program can be opened through: Start - Accessories - Dictaphone. Start recording and see if the sound is working.

2. You can go to the installed Skype program, find the sound test (Echo / Sound Test Service) and run it. However, in this case, the parameters of Skype itself may be configured incorrectly.

3. Immediately go to the computer settings and check if the microphone is on.

Each OS has its own path to sound settings, but even users with basic knowledge of PC should not have any difficulties.

How to turn on the microphone on headphones on Windows XP, 8, 8.1

The microphone activation procedure takes no more than 5 minutes. To do this, after turning on and checking the headset, if it does not work, do the following:

1. Find the sound image in the lower right corner, right-click on it and select Playback Devices.

2. The "Playback" subsection will open. Find "Speakers", right-click and set "Use as default". In the same place, look for "Speaker Settings" and set "Stereo" in the configurations.
3. Returning to the subsection, find the "Record" column at the top. And do the same with the "Microphone", but instead of the settings, select "Properties" and "Levels", where set the indicator to the maximum.

4. After such manipulations, check the operation of the headset in a way convenient for you.

If the accessory does not work, double-check that it is connected correctly. And also the operability of the device on another computer or mobile phone (if the model is with a combined plug). So, you can determine the health of the headphone and microphone jacks themselves in the system unit.

Important! The default settings and the volume level are the same everywhere, only the search paths for the window for making changes are different.

Control panel setup for all Windows, including 10

Control panel - a window where shortcuts are displayed for setting all the main functions of the computer, including sound and recording. To open it in Windows XP, 7 or 8, just click on the "Start" button and find the corresponding entry. Then, select "Sounds" and carry out the above manipulations.

Headphone wiring

The interface of Windows 10 is arranged differently, where there is no usual "start-up". To get to the settings, do:

press Win + S to open the menu;
find the image of the "house";
select "Control Panel" (classic application);
in the window that opens: Hardware and Sound - Sound.

This will take you to the graphs you need to configure.

Microphone not found error

Sometimes, in order to understand how to set up a microphone on your headphones, you first need to "make" the computer see it. For this:

go to the control panel and find "Device Manager";
look for the column "sound, game and video devices";
find the microphone you want, right-click and select "Enable".

After that, carry out all the above manipulations and use the microphone in the headphones, if it is working properly.

Connectors

Such connectors are called TRS (Tip, Ring, Sleeve - tip, ring, sleeve), but more often they are called "Jack" (jack). There are several types of such connectors, which are divided by size:

Also, similar connectors on the computer are classified by color: green Is the headphone input, pink- microphone input, other colors are used to connect line-out, additional speakers, etc.

A combo connector is sometimes used on laptops. That is, only one input is installed, which includes immediately the connection of both headphones and a microphone.

On laptops, this connector is usually not color-coded. An icon depicting a headset is drawn next to it.

On a computer, the audio input is located on both the front and rear panels (the front connectors sometimes need to be connected to the motherboard first). Typically, the left is the green headphone jack, and the right is the pink microphone jack.

How the plug works

The combination plug has four contacts. Each is responsible for a separate channel. The first is responsible for the microphone, the second is for the general, the third is for the right sound channel, and the fourth is for the left. Most often, this manufacturing technology is used in telephones. To use it on a computer, you need a special connector.

Bipolar plugs with two circles around the connector, refer to monaural devices or microphone.

All types of plugs can be changed using adapters, while in the presence of a high-quality adapter, the signal quality is not lost.

How to connect headphones with microphone to the back of your computer

There is a headphone and microphone connection panel on the motherboard. It consists of three outputs (this is the minimum; there can be much more outputs). One of them in green is responsible for the headphones, pink for the microphone input, and blue for any connected audio device from which the recording will take place.

If the headset has an output one plug, then it is best to purchase a special adapter that will separate the channels. In this case, it will be possible to connect headphones to the green input, and the microphone to the pink one. No drivers are required.

The second method involves the acquisition of additional external sound card... It will help to improve the sound quality while listening and will take up very little space - one flash drive. You can connect your audio headset to it. In this case, you will need to install the supplied drivers.

The method is no different from connecting to a laptop - the same two inputs are separated by colors.

Connecting a headset through the front connector

Headphones are connected through the front connector, as well as through the rear. Only here everything is much clearer, because it is always located only two outputs- green and red. For headphones and microphone. In the same sequence as written and connect the headset.

In the case of a combination plug, the sequence is also identical.

If the headphone and microphone jacks on the front panel are not working, then most likely it needs to be plugged in. You can see how to do this in.

Headset settings

Windows 7

When you connect the headphones to a Windows 7 computer or laptop, if everything is configured correctly, the sound will automatically disappear from the speakers and appear in the headset if the latter are connected to the front connectors. If this does not happen or there is no sound at all, then do the following:

Windows 8/10

In Windows 8 and 10, the headphone setup procedure looks like this:

reconnect the devices to the front panel.

If there is no sound, then the sound card may be damaged or the wire at the headset is broken. Don't forget to check your drivers.

It is worth noting that, depending on the manufacturer of the sound card, the control window may have a different name and look, while the algorithm itself is identical, there are slight differences in the interface.

Headphone microphone settings

Setting procedure in Windows 7 slightly different from newer versions of the system:

on the tab “ Levels»Set the required balance. It is not recommended to amplify the microphone above 20 decibels, there will be an extra background;

The procedure in Windows 8 and 10 looks like this:

click on the volume icon on the taskbar, and then go to "";
go to " Recording". Highlight the microphone to be configured;
click " Configure microphone"And follow the instructions of the setup wizard;
then right-click on the volume icon on the taskbar;
go to "Recorders";
click on the item " Recording"And say a few words. Observe the indicators on the screen. If they appear, then the connection and configuration are correct.

How to connect headphones from phone to computer

First of all, you need to check if it works on another phone. If so, connect it to the back or front panel in the green input. Headphones are best connected via an adapter that separates the channels between the microphone input and headphones, since the telephone plug is a combined one.

You physically connect your headphones to your Windows 10 computer just like you would to any other computer. You need to find the audio jack, which is marked in green. Green color means that you can connect either headphones or speakers to this jack.

Pink means that a microphone must be connected to the jack, and blue means that this jack is for connecting an external audio capture device to it.

We are interested in a nest with a green color.

Socket color differentiation is used on stationary computers, on built-in or separate internal and external sound cards. But if you want to connect headphones to your Windows 10 laptop, the jack may not be green. Generally, on laptops, most often, there is only one slot and you do not have to choose. It will be black, or the color of the laptop case. But in any case, the jack will be in a single copy and the headphones must be connected to it. This is true for 90% of modern laptops that are designed for home use. If you have in your hands an exotic laptop that has several audio jacks, you need to be careful and read the instructions for the laptop, or look at the color differentiation of the jacks.

You have connected your headphones to the audio jack, now you need to set up your Windows 10 operating system to work with your headphones.

We will agree that the sound card of the computer is in working order and that the correct drivers are installed for it.

Setting up headphones in Windows 10

You have connected your headphones to the audio jack of your Windows 10 computer, now you need to configure the software. For starters, I offer a simple option for setting up headphones in Windows 10 using the new Control Panel.

Click on the button "Start", then find the gear icon and click on it.

The Windows 10 Control Panel has opened, in which you need to select the item "System".

You are now in the system settings. Now find in the list on the left side of the section "Sound" and the control panel for the audio device will appear in front of you.

The first thing you need to do is select output device that will play the sound. Click on the pop-up menu and select your device. The name of the device must be preceded by the word "Speakers"... Unless you have a separate sound card or other sound interface installed, it is likely, but not necessary, that the device will be named Realtek.

In my case, I have several sound interfaces installed in my computer; as a demonstration, I will use a Creative Sound Blaster ZxR sound card.

Now that you have selected the device you want, you need to set the volume to an acceptable level. While you do not know at what volume value your headphones will sound comfortable, I recommend setting it to a small value, for example, 25 units. Some headphones at a value of 25 will play quietly, others loudly, but in any case, such a volume level should not damage the headphones or scare you with a very loud sound.

You should already be able to hear the sound through your headphones. If it is still not there, and you know that the sound interface of the computer is definitely working, you need to scroll down the page and find the item "Device settings and application volume"... Click on this menu.

You will see the volume settings for each of the running applications that work with sound. Make sure to have the values you need for each application. For example, I launched 2 music players, one of which has a volume of 100 units, the second 50 units.

In this menu, you can flexibly adjust the desired volume for each application. Make sure these values are not 0, otherwise you will not hear any sound from them.

If there is still no sound, then either the headphones or the sound interface of the Windows 10 computer are not working normally and an experienced user or administrator must be involved.

Deep Tuning of Headphone Sound in Windows 10

I suggest you familiarize yourself with deeper sound settings for headphones in Windows 10 that you may need to get the best sound quality for your music and games.

Press the button Sound Control Panel.

You are in the Windows 10 Sound Device Control window. The first thing you need to do is select a playback device. For illustration, I'll be using the Sound Blaster ZxR sound card.

Select a device and click on the button "Tune".

Select mode "Stereo".

Check the box "Broadband speakers left and right".

After that we will return to the Windows 10 Sound Device Control window. Now click the button "Properties".

You must select a tab "Additionally" and press the button "Default"... This will return the settings that the manufacturer recommends for this audio device. If the sound in the headphones works in this mode, then everything is in order. In this case, you can experiment with adjusting the sampling rate and audio bit depth. But this is usually not required.

That's it, now the sound in headphones in Windows 10 should work fine. If there is still no sound, make sure that the correct drivers for the sound device are installed on your computer and that it is active. If the drivers are installed, but there is still no sound, most likely the problem is serious and requires the intervention of a technician at the service center.

Selecting the headphone mode in the settings of your sound card

All operations that I described above are required. However, they are not always enough. If your Windows 10 computer has a simple sound card with drivers provided by the operating system, the above steps will suffice.

But if you have branded drivers installed with the necessary additional software, additional steps are required.

To illustrate, I'll show you a display of the settings for my Creative Sound Blaster ZxR sound card.

As you can see, I need to additionally activate the sound playback mode in the headphones in the proprietary software that controls the operation of the sound card. At the top of the screenshot, you can see a switch that changes the playback mode from headphones to speakers and vice versa. If I perform all the steps described in the article above, but forget to turn on the headphones in the proprietary program, there will be no sound in the headphones.

This is also true for Realtek sound cards, but only if they have proprietary software for deep sound card management installed. For example, in the screenshot above you can see that in the Realtek control program you can select the green jack (to which the headphones are connected) and set the operating mode "Headphones".

This must be done. since this setting affects the operation of the device with a specific type of sound-reproducing equipment. As we know, headphones can have impedance values in a very wide range from 16 to 300 ohms and above. This means that the sound card must supply them with a signal with different amperage. When connecting speakers, there is no such choice for a sound card. the speakers are mainly active and are independently engaged in signal conversion, receiving a signal from the sound card with certain values of current and voltage.

In other words, check if your Windows 10 computer has proprietary sound card control software, and if there is one, make sure that you set the mode for working with headphones in it. This is important both for the sound quality and for the sound in the headphones to appear at all.