Make-up Tv Beeline Unlock under another operator. Ways to unlock the TV, buttons on it and channels. Possible problems and what to do with them

The MTS TV service appeared relatively recently and has already managed to conquer great popularity among users. However, there are increasingly questions about how to unlock the MTS TV console. User complaints are not sent, but most often associated with the problems of improper operation of equipment. At the same time, it is possible to make unlocking and independently without any skills to work with the technique.

Many believe that the remote control is blocked if he ceases to respond to commands. However, in such a situation, it is not always about direct blocking. Most often, the cause of the absence of a remote reaction to the impact is explained by the battery loss or the transition to the TV control mode. Accordingly, first of all it is recommended to try to replace the batteries. If remote control still does not work, it is necessary to return to it a normal mode of operation.

The company provides several types of consoles and consoles corresponding to them. Therefore, the solution of the problem on how to unlock the MTS console will be somewhat different:

For ZTE-B700V7. Switch the remote remote to the correct mode is necessary by the button with the inscription "MTS". Under it there is a light indicator showing the readiness or non-unpretentiousness of the device to work.
Huawei DN 300. For unlocking, you will need to press the "TV" or MTS TV button and pay attention to the indicator. His one-time flashing testifies to the transition to the control mode of the prefix, double-tv.
SML-282/292/482. The transition to the desired mode is carried out with the STB button.
Motorola VIP 1003. Enabling the console management mode - MTS, TV - TV.

These methods are relevant only when servicing the TV and the console itself.

If the switching instruction does not help, it is necessary to produce technical diagnostics of equipment. In addition, it is recommended to check the status of the connection cables, since far from always the absence of a reaction to pressing the buttons indicates a direct locking of the remote control.

Conclusion

Some MTS subscribers complain about the complexity of the operation of TV consoles due to systematic locking of the remote control device. However, the phenomenon indicates the presence of faults, so when the absence of a reaction is found, it is recommended to check the remote control on the system connection type. If this does not help, you should also analyze the quality of the batteries, cables, and then the equipment.

Sometimes it happens that children or adult users by negligence include blocking on a TV or parents block the TV from children, and then make it difficult to remove it. Often the situation when the owner simply forgot the password and now he does not have to view the channels. Signs of television lock it is:

Displaying the blue screen on which the key is depicted;

A field appeared on the screen where the device requests to enter a PIN code (password);

Available for viewing just one single channel.

Answering the question of how to remove the blocking from the TV, it is necessary to highlight three main options for solving this problem, namely:

Disable the lock using the remote control by typing a special combination of buttons;

Set up channels again (sometimes they can be shot down by chance or due to a software failure);

Email television memory.

Usually blocking is removed on its own, but if you need a flashing, it is better to resort to the help of a specialist. In general, for independent work, the owner must have only two things - instructions for their TV and a good remote control to it. If the instruction is lost, look or download it will not work on the Internet. Regarding the TV model - this information is indicated on the back of its panel.

What to do in the standard situation

Having in the hands of the instruction to TV, you should carefully read those partitions that relate to the lock. Your task is to find a special code, a combination of numbers, after a set of which the lock is installed on the remote and removes. Also in the instructions are written actions and their sequence specifically for your model. If there are no instructions, and there is also no access to the network, you have to strain the memory and remember what exactly led to the fact that the device is blocked.

From the remote control you need to press the P and + buttons by closing them at the same time. Next, you need to enter a password out of three or four digits. The type of such combinations is standard consisting of identical values, for example, 1111, 4444, 333, coinciding with the number of the most frequently used channel. Quite often used standard codes in the form of 1234 and others. After entering again, press +.

If, after these actions, unlock the AKAI TV (Akay), Samsung, LG, the Thomson models and others did not work, the password is reliably unknown, you can try other combinations, they are installed by factory settings not too complex.

There are televisions that support only one-button lock. Accordingly, to block or unlock the channels, you need to hold this button and hold five to ten seconds.

Possible problems and what to do with them

Before unlocking TV, you should first figure out the cause of the problem. Based on the practice, the most common cases are presented below:

What can be	How to eliminate
The user installed the password and forgot, does not know it (the blue screen with the key can testify to this)	Click the DISP button on the remote to ten seconds. If it does not help, use the regular console in accordance with the instructions for TV
Posted by protection from children, but lost the remote control	Without the remote, it is impossible to solve the problem, you need to find it or buy a new
TV does not respond to pressing the buttons on the remote control	Perhaps the remote has failed or sat down batteries. You should purchase new batteries or a remote. You can also use your smartphone as a remote control (if the TV is supported by such a function). You can also check the operability of the old one using the phone by holding any button and photographed the remote direct on the phone - if the micro-flash in the photo is there, the remote control. In this case, the port of the TV was probably failed and you need to call the masters.
Only one channel is available.	Probably confused channels. Master is not needed, as you can configure them yourself

Sometimes it happens that after removing the blocking, the TV channels are not configured or after it is knocked back, the television menu hangs, and other strange failures are detected. This may indicate that the tuner is faulty and the TV must be accepted again (update). For inexperienced users, it will be more expedient to contact a specialist.

In the process of using the technique, it is often necessary to find an answer to the question of how to unlock the remote control. This often happens after he falls into the power of pets or young children. The champion may be an accident when it is randomly pressed by its defined buttons. In any case, the problem requires a solution, and below we will offer options out of the situation when the console has been blocked.

If the TV does not respond to the console command, the first thing to be done is to check its batteries. Maybe they simply discharged or faulty. Make it very simple:

open the battery compartment;
extract installed batteries;
insert similar new batteries.
check the performance of the remote control.

On a note! It is worth viewing the compartment with batteries for the service of contact pads. Perhaps they renewed, or they formed traces of oxides. All this can also lead to the fact that the remote control does not work.

If nothing has changed after the events, it's time to think how to unlock the remote control from the TV. Ways to unlock the remote control can find a huge amount. But not each of them will be effective for a particular model. The most optimal option is to view the instructions for the TV. Usually there are answers to all common questions. But the book is not always preserved after the purchase of equipment. For this reason, you have to look for an answer independently.

In the instructions typically prescribed special code. It will be enough to press this combination on the remote control buttons, and the problem will be solved. If no papers persist, the first thing you should think about - how the blocking occurred. Having tried to fulfill the opposite, you can make a remote control with respect to the TV.

Alternative methods

There are a large number of options for unlocking the remote control that users offer Internet users:

You should simultaneously press the "P" and "+" buttons. After that, a combination is recruited from the same digits, for example 2222 or 5555. Among the common and standard codes, 1234 or 1111 are taken. After a set, click "+". Perhaps it will be a completely different combination of numbers. Options should try numerous.
After the initial numbers from the first method are pressed, the LED should burn without a break. In this case, instead of a combination, you can try simultaneous pressing: "Menu" and "+ Channel", "Menu" and "+ Volume".
Sometimes it is enough to hold down a single button for about 5-10 seconds. But this method is suitable for reading TV models.

Remember those combinations of numbers that click! After all, rampant actions can only aggravate the situation.

Some console models can be unlocked while pressing the "EXIT" buttons and numbers 9 and 1. Also suitable for pulling out the batteries, and the power button must be kept when they are inserted. It is these ways that help return the remote control to full work.

What is a hotel mode

In some models of the telephoneial, there is an option called "Hotel Mode", which is translated as "hotel mode". If it is enabled, the technique will not respond to many console commands, for example, an increase in volume or search for new TV channels. This is done to limit the possible actions of guests in hotels. Thanks to its use, a loud sound from the TV will not interfere with other residents. However, in the conditions of a personal apartment or house, the included "hotels" mode will only interfere.

To disable the option, you can use the following recommendation. In standby mode (STAND-BY) Press the Display / Menu / Power button buttons. Another sequence option looks like this: Display / Menu / Mute / Power ON, and in the menu that appears, select the RESET item, press the MENU button. Thereafter technique must be rebooted (Disable and enable).

How to remove parental control

Another option, which is often implemented in modern TVs - parental control. It is intended to limit the actions of children: for example, viewing forbidden TV channels, changes in system settings. To perform such actions, the TV will ask for installed PIN.

But sometimes this control plays an evil joke with the parents themselves: turning it on and forgetting the code, you can face uncomfortable restrictionsselves. Remove them will help reset the TV settings, namely the password. Let us give an algorithm for smart TVs LG:

we enter the menu / settings;
go to the Security / Ping Code Reset tab;
we enter any combination of numbers without pressing ok;
press the channel switching buttons: twice up, then down and up again;
we enter the code 0313 and click OK.

The result of these events should be a discharge of a PIN-code on the factory, that is, four zero.