Selecting the best thermal paws for a laptop. Choosing the best thermal paste for laptop Which thermalcase is better for a budget laptop

When the user notices that the work of the central processor, CPU and GPU is accompanied by a high temperature, they heat, then not prevention and cleaning from dust. Replacing the thermal paste on MSI laptops - the required moment, which is not every user pays the necessary attention. We do not recommend to replace it yourself to intervene in the design of the device - the consequences of such an intervention lead to damage to expensive components, therefore it is better to entrust the operation to employees of the corporate service.

The cost of work of such a plan is low, but the owner of the technique is confident that the operation will hold professionally. If you have noticed an increased heat dissipation on any MSIIG series of the game, prestige, classic, call the official service center - the problem needs to be urgent to avoid serious consequences.

Why you need to change the thermal

Often, the Gamer laptop Mesai Series Gaming, Prestige, Classic is independently disconnected due to the high temperature of the processor, which overheats. This occurs due to drying the thermal paste and reducing the level of thermal conductivity between the processor and the cooler. More often, the problem occurs on the working gadgets, regardless of the processor type (Intel or AMD), model and size of the device (11.6 ", 12.1", 14 ", 15.6", 17.3 ", 18.4").

Replacing the thermal paste on MSI laptops quickly solves such a problem, helps to avoid the costly installation of new original components. If you run the situation, the cost of repair increases. The price of replacement of parts depends on the urgency of the order, additional damage identified during the diagnostic process. We carry out such a service base procedure with the condition that the subsequent operations customer performs in the workshop.

Replacement with warranty

We carry out the repair of MSI laptops comprehensively using professional tools and equipment. If the diagnostics shows a hidden problem, we must write the details of the device to the owner and speak how much the work is worthwhile. In any case, it is inexpensive, as we cooperate with the official suppliers of original spare parts.

Repair guarantee - a mandatory stage of cooperation. The warranty period reaches three years, then perform post-warranty service. I will find laptops in more than 20 cities of Russia, workshops are located near the metro stations. Find out the cost of such a service from the service center for the specified phones on the site.

Over time, the factory thermal paste laptop (netbooks) dries and hardens to a terrible state. The stronger the thermalcase dried, the hardest it will be removed. The dried thermalcase becomes absolutely not thermal conductive, the heat is not discharged from the elements, which leads to the permanent overheating of the processor and the video card and can cause them breakdown.

Therefore, if you notice that your laptop or netbook began to warm much stronger, try not to tighten with the cleaning of the cooling system and the replacement of the thermal paste to the new one.

In this article, I will tell about the analysis and replacement of the MSI U210 netbook thermal paste.

MSI U210 Netbook Symptoms: Strong heating of the case, the sound of the fan operation, charging after once (it is necessary to move the plug) and the slow operation of the system.

We unscrew all bolts from below.

After all the bolts are unscrewed, remove the top cover and turn off the hard disk.

Now you need to remove the keyboard. To do this, turn the netbook and open the top cover. Claivatura, in addition to the separated bolts, keeps on small snacks. Gently move them with a screwdriver and raise the keyboard.

We can proceed to removing the bottom of the netbook housing and removing the cooling system. I turn over the netbook and remove the lower part of the case. After that, unscrew and remove the cooling system.

We remove the old thermal path with the windows and from the processor. T. K. It's just not to erase the thermal path, in view of the fact that it dried greatly, you need to soak it several times in alcohol. After each soaking, we gently wipe the processor with a cloth until it clear from the old thermal paste.

As usual, I use CPT-8 paste. Someone may be opposed, but the pasta has proven itself, does not dry out over time and you can buy it almost in any radio store.

Regarding charging.
The netbook owner with great diligence inserted the charger and joined the wire several times. As a result, the plastic connector cooked and soldered off from the reverse side of the connector. The connector was successfully subfed, and the plastic part was twisted.
We collect a netbook and return the owner.

After replacing the thermal paste netbook began to warm up much less and stopped slowing down.

from 310 R.

- One of those things that can be performed independently. However, it will be necessary to disassemble the device into components, which can lead to the failure of some components. Therefore, we recommend contacting mSI service center in MoscowTo replace the MSI thermal poll quickly and inexpensively.

How to replace the thermal poll?

Replacing the thermal paste (liquid metal) is required in the following cases:

• Cooling system malfunction due to frequent laptop overheating.
• The laptop is very noisy and heated during work.
• Vents breakdown.
• The cleaning of the laptop was carried out for a very long time, dust fell into the cooling system, foreign objects.

You can change the thermal path yourself, if you act very carefully. The following steps are required:

1. Disable MSI laptop and disconnect the battery, all connected devices. If MSI laptop is greatly heated while working, you need to give it to cool.
2. Now you need to get to the cooling system to change the old thermal chaser for a new one. Carefully unscrew 7 cogs to remove the cooling system.
3. Well clean the cooling system from dust. For convenience, use the brush.
4. Unscrew five power cords from the MSI cooling system to replace the thermal paste.
5. Carefully consider the old thermal path, trying not to touch the thermal block.
6. Gently replace the thermopast for a new one.
7. Install the cooling system in place. Re-assemble all components of the laptop.

Is it worth contacting the service center?

For fast and high quality replacing MSI Laptop Thermal Laptop Contact Our Service Center in Moscow. We offer our customers available prices (lower than competitors in the city). We employ only experienced specialists, and the workshops are equipped with high-class professional equipment. For prevention, make sure to overheat the laptop happened as close as possible, and also regularly clean it from dust and dirt. We provide a 12-month warranty.

Connected problems

Need help?

Contact - Let's help!

Honest prices

Coordinate the value of repair before proceeding to work and do not put before payment

Ovual warranty

We support Garather service and give Garas to 12 months

Free departure Masters

Some services Our masters can put on home or office

Original components

We work with official suppliers and do not mark parts for spare parts

The laptop cooling system often works in extreme modes. As a result, the right choice of the most effective thermal paste acquires extremely important, which even in such harsh environments allows us to provide a normal heat exchange between the surface of the processor and the radiator. Next, we will tell you what to pay attention to when acquiring a thermal interface, as well as what thermal one should choose for a laptop.

What to pay attention to the purchase of thermal paste

If you acquire the producer unknown to you, pay attention to the first thing to the data recorded on the package. The following parameters are usually indicated:

1. Thermal conductivity, W / (M · K) is the most important parameter of any thermal interface. For a laptop, try to acquire pastes with its highest value.
2. Thermal resistance. Also sometimes indicated on the package. This is the value, reverse thermal conductivity, respectively, than it is lower, the better.
3. Plastic. This property is important primarily in terms of the convenience of applying thermal paste to the surface of the processor. Users who have not previously used to use it is better to choose more plastic material. It is easier distributed over the surface of the processor and is easier to be removed later.
4. Resistance to temperature differences. With constant leaks of temperatures that during the operation of the laptop inevitably, the thermal interface is simply dried. A good wear resistance index for a heat-conducting paste is one year, after which it is subject to replacement during periodic cleaning of the laptop from dust.
5. The value of the material depends on its composition and weight in the package. Often in one syringe contains 4 gr. Paste, but sometimes it can only be 2.5 gr., or even less. Moreover, often the tubes are wrapped with an opaque film, as a result of which the visual number of thermal paste is not possible in it.

It should be noted that even the highest characteristics of the pastes written in the package do not guarantee their exceptionally positive performance. Manufacturers sometimes deliberately overestimate, for example, the thermal conductivity indicators specified in the specification, as a result of which cheaper thermal interfaces sometimes show themselves better than expensive analogs.

A few words about thermal

The significant difference in thermoplastic glue from the thermal paste is that under the action of an elevated temperature, it changes its aggregate state, turning into a liquid shape of solid.

This material is occasionally used in laptops, since it provides a rather high thermal conductivity, squeezing air from microscopic irregularities on the surface of the processor and radiator.

However, the liquid state of the thermoclause is usually transmitted at 100 degrees, which is already a lot for the crystal. At the working 70-80 degrees, this material cannot provide the quality of heat transfer, which is achieved when using thermal conducting pastes. Yes, and remove the old dried glue when cleaning the cooling system will be more difficult.

Compare thermal paste

Note that not all pasta is found in free sale. Sometimes they can only be obtained when buying a cooler of a certain brand. But the domestic brands of the KPT-8, ALCCH-3, foreign Arctic MX-2 and 3, Arctic Silver Matrix, Coolage CA-CT3, Deep Cool Z9, etc. Let's consider the rating of some of them in more detail What paste send your choice.

Arctic MX-2, MX-3 and MX-4

These thermal masses produce the Swiss company Arctic. MX-2 can be bought in the packaging of 30, 8 and 4 gr., MX-3 is sold only in the syringe of 4 gr. The paste is distinguished by advanced formula and is more suitable for overclocking lovers, although it is not relevant for laptops. The stated difference in the temperatures of these two samples is only 2.5 degrees. These pastes do not conduct electricity, so safer for the processor and components of the board with random hit.

In color, these materials are identical, but the consistency have different. MX-2 is more viscous and plastic, which makes it more comfortable when applied. MX-3 is quite difficult to apply a subtle smooth layer on the surface, because of what, in fact, it was already removed from production, although the remnants still can be purchased. MX-4, on the contrary, is deprived of a similar drawback, while thermal conductivity is higher than MX-2.

Arctic Silver 5.

This is no longer a new thermal panel, but still this choice of many, since the paste is tested by time and is still a reference standard. There are packages of 3.5 and 12 grams on sale, its thermal conductivity among most other thermal interfaces is the highest - 8.7 W / (M · K).

It is not silicone as a binder here, but a corporate composition of synthetic oils. As a result, it strongly sticks to any details, but despite this to apply it to the surface of the processor even an unprepared user will be quite easy. Electric current This material also does not conduct, over time does not dry and does not flow.

Arctic Silver Matrix.

This is a budget version of the thermal paste reviewed above. It is sold in a syringe without packing at 2.5 gr. The consistency of this thermal interface is sufficiently thick and viscous, but it is applied to the processor despite this is quite easy.

COOLAGE CA-CT3 NANO

This thermal interface is a product of a notorious Skolkovo. The consistency is quite thick, while very plastic, the paste itself is sticky. Perhaps, as follows from the name, due to the presence of nanoparticles, the material is smeared by a very thin and smooth layer, while the thermal conductivity of COOLAGE CA-CT3 Nano is definitely defined - more than 5 W / (M · K).

The paste also has dielectric properties, does not dry out for a long time, as a result of which will also be very good to behave on any model of the laptop.

What thermalcase is better for a budget laptop

The previously discussed thermal interfaces, in a small exception, are quite expensive, having excellent thermal conductivity indicators, high wear resistance. It is better to use them in game devices, where the performance of the cooling system requires a maximum performance.

If you plan to clean with the replacement of the thermal paste, a regular office laptop, used mainly to work on the Internet or with documents, it is quite possible to limit the cheap domestic alias-3.

Her low rating due to rapid drying on the surface of heat exchange. Because of this, it quickly loses performance, in addition, the thermal conductivity of its order is only 0.8 W / (M · K), which for laptops will be clearly too low.

• Prices are 15% below the procurement due to the purchase of components directly from manufacturers
• Express diagnostics of MSI laptops for 15 minutes - 0 rubles.
• Urgent laptop repair - from 30 minutes
• Official laptop repair warranty - up to 6 months

If your MSI laptop began to slow down or spontaneously turns off, then the reason for this can be overheating. To effectively eliminate problems, several methods are used:

• Clean the device. This is a good way that is most effective for newly acquired techniques.
• Purchase a special cooling stand.
• Replace the thermal. This method helps reduce the temperature of the video card and processor up to 10 degrees. It is usually applied when the cleaning did not give the expected result.

When there is a need to replace the thermal paste, the owner considers two options for solving the issue. One of them is an independent replacement. Such a procedure without the necessary knowledge and experience imposes risks for the performance of technology. A reasonable user will not risk its laptop and trusted to specialists.

Prices for services for repairing MSI laptops

Experienced masters of our service center in a short time will replace the thermal paste in the MSI laptop. This professional procedure will save you from problems arising from the device overheating. High-precision equipment after the procedure tested the device and determine its current performance. After successfully completing the service services, you will receive a warranty document for up to 6 months.