Custom firmware for Samsung S3 GT i9300. MIUI V5 review is the best firmware for Galaxy S3. Samsung GT-I9300 Galaxy S3 - factory firmware

Among the dozens of models of smartphones produced annually by one of the market leaders - Samsung - the flagship devices of the manufacturer attract special attention. As for the program of the Samsung flagships, here we can talk about the widest opportunities for its variability. Consider in this aspect The Samsung GT-I9300 Galaxy S III model - about the methods of the device firmware will be discussed in the suggested material below.

A high level of performance and a large reserve of productivity, thanks to the use of the most advanced achievements of the industry make it possible to easily use flagship solutions Samsung for many years, without a critical drop in productivity. Some attention requires only the software part of the device. However, to interact with systemic software, up to its complete replacement, there are convenient tools and proven methods.

All manipulations of the following instructions are produced by the user at their own risk. The author of the article and the site administration does not guarantee the achievements of the results positive and desired by the owner, and are also not responsible for possible damage to the smartphone as a result of incorrect actions!

For the most quick and effective implementation of the process of reinstalling the system software in Samsung GT-I9300 Galaxy S3, it is necessary to carry out several preparatory procedures. This issue should be given due attention, because only after the proper preparation, you can count on a positive feedback and quick elimination of errors, the appearance of which is possible when installing android in the device.

Drivers

Almost all procedures involving serious interference in the Android-smartphone system software require the use of PC and specialized utilities as tools that allow manipulation. Therefore, the first thing you should take care when you need to flash the Samsung GT-i9300, this is the correct pairing of the device and the computer, that is, the installation of drivers.

Usb Debug Mode

To use Windows applications to interact with smartphone software components, a special mode must be activated on the device. "USB debugging". This option will be required to use virtually any manipulations involving access to the data in the phone's memory. To enable the mode, we do the following:

Rut-Ruth and BusyBox

Without the use of superuser rights, conducting serious interference with the Samsung GT-I9300 Galaxy S III software is impossible. At the preparatory stage, root law will be allowed to create a full-fledged backup, and in the future they will allow you to implement virtually any manipulation, up to its complete replacement.

To get privileges on the model under consideration, one of the software tools is used: Kingroot or Kingoroot is the fastest and simple tools with which it is easy to rush the device. The choice of a specific application remains for the user, in general, they work equally efficiently and easy to use.

In addition to the root right, many operations with the Galaxy S3 GT-I9300 model require the availability of in the device installed
BusyBox - a set of console utilities that allow manipulations that require the connection of additional OS kernel modules. Installer that allows you to get BusyBox available on Google Play Market.

Bacup

Theoretically, after installing the drivers to perform manipulations with Samsung GT-i9300 Galaxy S III through programs to interact with memory sections, there is practically no obstacles, you can start installing Android, but, as you know, this process may not always be accurate and able to lead to Damage to individual software components of the device, not to mention the fact that all user data as a result of the procedure will be removed and the restoration of all necessary - contacts, photos, applications, etc. In a word, without prior backup, it is not recommended to start reinstalling android.

Custom data

To save information accumulated in the phone's memory during operation, the easiest way to use the above-mentioned driver installation process SMART SWITCH from Samsung is the easiest. We perform only three simple steps and all information will be archived to the backup:

It should be noted that the recovery from the backup created using the Samsung branded on Samsung will be possible only for a smartphone operating under the official firmware. If you plan to transition to custom or there is a desire to further reinstate the data loss, you can use one of the instructions for creating backups offered in the material below:

Section EFS

An extremely important system area of \u200b\u200bsmartphones memory is "EFS". This section contains a serial number of the device, IMEI, the GPS identifier, Wi-Fi-Fi-, and Bluetooth modules. Damage or deletion "EFS" In the process of manipulation with system partitions for various reasons, it will lead to the inoperability of network interfaces, and in some cases it is impossible to turn on the phone.

For the model under consideration, the creation of a backup "EFS" Before reinstalling the system software is not just a recommendation, but mandatory to fulfill the requirement! Ignoring the operation for the creation of a dump repeatedly increases the level of risk of obtaining an inoperable smartphone!

In order to always be able to quickly restore the section "EFS" In Samsung Galaxy S3, create a dump area with a specialized software - EFS Professional.

Recovery "EFS" Used tab "Restore" In EFS Professional. After connecting the smartphone in the same order as when creating a backup and transition to the program recovery section in the list "SELECT A Backup Archive to Restore" You need to select the backup file, check the availability of marks in the field checkboxes "Archive Backup Contemps" and by clicking the button "Restore", wait for the completion of the procedure.

Firmware

One of the remarkable features of the flagship apparatus Samsung is the presence of a huge number of modified informal firmware for them. The use of such solutions makes it possible to completely convert the software shell and get new version of android. But before switching to the installation of customs, the methods of installing official versions of the system should be studied. In case of problems, this skill will allow you to restore according to the model in the original condition.

Method 1: Smart Switch

The Samsung manufacturer keeps a rather strict policies regarding interference with the work of the devices of its own brand. The only thing that it allows to make the Galaxy S3 firmware is officially updating the version of the system via SMART Switch, already used by us above when installing drivers and create a backup copy of information from a smartphone.

Install and launch Smart Switch. We connect the smartphone running to the Android to the USB port of the computer.

After the model is determined in the application, the version of the system installed in the phone is automatically reconciled on the samsung version servers, and if the update is possible, an appropriate notification is displayed. Press "Update".

Confirm the need to start updating the version of the phone system - button "Proceed" In the emerging request window that appears with the editors of the installed and affordable system software.

After familiarization with the conditions under which the update is carried out successfully, click "All confirmed".

Further, Smart Switch will carry out the necessary manipulations automatically, reporting on the performance indicators in special windows:
After receiving confirmation of the successful end of the OS update in the Smart Switch window

Samsung GT-i9300 Galaxy S3 can be disconnected from the YUSB port, all the system software components are already optimized.

Method 2: Odin

Using the ODIN universal means to replace the system software and restore android in Samsung devices is the most effective method of manipulation. The application allows you to set the official firmware of two types - service and single-foam, with the installation of the first package option, is one of the few ways to "revive" inoperative in the Galaxy S III software plan.

Before using one to overwrite sections of memory samsung GT-i9300, we recommend reading the instructions for reinstalling the system software using the application in the general case from the material available at the link:

Service package

Special type of package with system software used in service centers and intended for installation in Android-devices Samsung through one called name "Multifile firmware" Due to the fact that includes several system component files. You can download the archive containing the service solution for the model under consideration by reference:

Transfer S3 to ODIN mode. For this:
Run one and connect the phone to the USB port. We are convinced that the device was determined in the program in the form of a flowing field with a blue field with a Som port number through which the connection is carried out.

We add to the program components of a multifile firmware from the folder obtained as a result of unpacking the archive downloaded by reference above.

To do this, alternately press the buttons and specify the files in accordance with the table in the conductor window:

After loading all the components of the software window, one must have the following form:
If you are planned to re-install the device, specify the path to the PIT file on the tab "PIT".

Conducting the revimaging is appropriate only in critical situations and when errors occur during the operation, one without a PIT file. Initially, you should try to hold the process of reinstalling android, lowering this step!

Press the button "PIT" On the same tab in ODIN and add a file "MX.PIT"present in the directory with the proposed package.

When using a PIT file in the process of reinstalling Android on the Samsung GT-i9300 on the tab "Uptions" In ODIN there must be a mark "RE-PARTITION".

Making sure that all files are added to the appropriate fields and the parameters are specified correctly, click the button "Start" To start transferring files to the memory of the device.

We still expect one to overwrite the memory regions of the smartphone. The interruption of the process is unacceptable, it remains only to monitor the execution indicators in the firmware window and, at the same time,

on the S3 screen.

After in the indication field of the processes in ODIN will appear "PASS",

the device will restart and initialization of OS components will be initialized.

Installing Android is complete, and in the end we get a previously cleared device from the remnants of the previous operating system,

which demonstrates the same level of performance as when it is first turned on after the purchase.

Single-name firmware

If you need to easily reinstall the Android, updates or rollback version of the official OSSUNG GT-i9300, a single-fuel package is usually used. Download the latest version of the official OS for Russia to install it through one, you can link:

It is much easier to establish such a decision than the service. Just perform the same steps as in the instructions for working with a multifyle package, but instead of paragraphs 3 and 4, you need to make a button "AP" Adding a single file * .tarcontained in the catalog obtained as a result of unpacking the archive with a single-fuel firmware.

Method 3: Mobile Odin

Many Android-devices users are interested in the possibility of reinstalling the OS on the device without using a PC. For Samsung GT-i9300, this action is feasible using the Mobile Odin - android application tool, which allows you to easily install official single-fuel firmware.

Get a tool in the device by downloading from Google Play Market.

Successful performance of mobile functions One is possible only if root rights are obtained on the device!

The software package used in the example below can be downloaded by reference:

Installing Mobile One and put the package that will be installed, in the internal memory of the Galaxy S3 or on the memory card installed in the device.

Run the application and provide Mobile Odin Rut-Right.

We download the additional components of the MobileOdin, providing the ability to install packages with system software. A request for updating will appear when the tool is first started. Confirm the need to download supplements tap by button "DOWNLOAD" and expect the end of the installation of modules.

Before installation, the firmware file must be loaded into Mobile Odin. Frapping the list of options on the main screen of the application, we find and click "Open File ...". Select the storage where the firmware is copied, then specify the file intended for installation.

If a system version rollback rollback is performed, you must first clear the sections of the device's memory. To do this, celebrate Chekboxes "WIPE DATA AND CACHE", as well as Wipe Dalvik Cache.

In the event of an update, data cleaning can be not carried out, but the procedure is recommended, as it allows you to remove the "software garbage" from the system, and also prevents the appearance of many errors when installing android and its further operation!
Press "Flash" And confirm the appearing application requests.

Further manipulations of Mobile Odin carries out without intervention from the user. The latter remains only to watch for:

After the appearance of the welcome screen, we carry out the initial setting of OS parameters.

Everything is ready to use Samsung GT-i9300 Galaxy S III running reheasted official android.

Method 4: Custom firmware

The above-described methods for installing official editions of the Android in Samsung S3 allow you to bring the device to the factory condition and solve a lot of problems arising for various reasons in the process of using the smartphone. If the purpose of the device firmware is the complete transformation of the program part, bringing new features to the device and transformation of the phone in a really modern, in any case with respect to the version of the OS, the device, you should pay attention to the possibility of installing one of the custom firmware.

Since the level of popularity of the model under consideration is extremely high, a large number of different informal solutions of system software based on Android versions of Kitkat, Lollipop, Marshmallow and Nougat have been created. Below are the most popular modified shells for S3, and their installation can be divided into two stages - equipping the smartphone modified recovery, and then the immediate installation of the informal android.

Installation, Running, TWRP Setup

In order for the possibility of installing a modified unofficial OS on the model under consideration, the device must be equipped with a special recovery medium - custom recovery. For the device under consideration, several solutions are available, including CLOCKWORKMOD Recovery (CWM) and its updated PHILZ Touch version, but the most functional and convenient product is considered to be Teamwin Recovery (TWRP), and should be installed to obtain results as in the examples below.

For all Samsung flagship solutions, TeamWin team officially developed and produced packages from recovery, which are set by several methods. Two of them are already told in articles on our website.

In the desire to get the newest Android versions on the Samsung GT-i9300, many of the apparatus owners ignore the possibility of using one of the most beautiful and functional shells for the apparatus under consideration - MIUI. Meanwhile, this product is considered one of the best solutions, despite the fact that it is based on a terrible relevance of Android 4.4.

Miui packages intended for installation in the model under consideration are posted including on the sites of famous Miui.su and Xiaomi.eu developers.

How to flash Galaxy S3?

Very often, the owners of the Korean smartphone company Samsung seek to increase the performance of the apparatus and its functionality due to flashing. Software updates helps to improve the technical characteristics of the gadget. In this article, we will look at how to flash a mobile phone on the example of the Samsung Galaxy S3.

How to easily flash smartphone

Before starting the work, charge the phone (preferably to the maximum) and make a backup of important information from it. To execute the instructions, you will need a computer or laptop with a global network, as well as a USB wire.

First of all, you need to download a program for flashing to the computer (this article article implies the use of a special ODIN program), the latest version of the firmware for the phone you are interested in and the driver set for the smartphone (for example,). For convenience, place all downloaded files into one folder.
To avoid unforeseen situations while updating software, we recommend to disable antivirus during the procedure.
It is also worth disabled the KIES program (in case it is installed).
After downloading, install all the necessary programs on your computer. Unpack the file with the firmware.
Next, you need to make manipulations with a smartphone, namely translate the phone to download mode. To do this, turn off the device and press the following buttons simultaneously - Menu (Home / Home), Power (Power) and Volume Runner up. Wait for the information message to the mobile phone screen and press the volume key again (Runner Up).
After these action, connect your mobile device to a computer using a USB wire.
Run the ODIN program, then click the PDA button and select a file with the firmware.
Next, click the "Start" button and wait for the software installation. Usually the firmware process lasts about five minutes. At this time, it is important not to disconnect the phone from the computer.
As soon as the operation is completed, the message "Pass" or "Reset" appears on the smartphone screen, and then the phone will reboot.
Disconnect your mobile phone from the computer, close the program and use the stitched smartphone.

It is worth noting that contacting the service center to update the software will entail considerable costs.

An independent flashing of a mobile phone should not be difficult if you are clearly follow this instruction. However, we warn that if you are not confident in your abilities, it is better to trust the operation to professionals. Please note that the editors are not responsible for incorrectly perfect actions by the user.

You can find in our section.

Instructions for installing the official single-fuel firmware on Samsung Galaxy S3 (GT-i930X).

Drivers and programs

Attention!

To set the official stock firmware on the Galaxy S3 and return the phone status ("Settings"\u003e "About Device"\u003e "Properties"\u003e "Device Status") to "Official" after the transition from custom firmware and thereby return the possibility of receiving air updates enough Follow the instructions provided.

Installation Instructions

Unpack the downloaded archive to the folder with ODIN PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, and "SS_DL.DLL" can be deleted.

Run the device data reset.
To do this, go to the settings on the "tab" Accounts"In the section" Archiving and reset", Choose the item" Reset device"And click the" Delete everything" The phone will be rebooted.

Run ODIN PC on behalf of the administrator.

Translate the device to download mode ( Download Mode.).
To do this, you must simultaneously press the volume key, the Home button and the power button. Then wait until the phone restarts and accept the warning by pressing the volume key.

In such a state, connect the smartphone to the computer. In Odin should light up the inscription " Com.».

Press the " Ap."And choose the TAR-archive of firmware.

Points " AUTO Reboot."And" F.Reset Time." must be activated, but " Re-Partition.", If active - need to disable.

Press the " Start." The firmware installation process will begin.

At the end of the operation, if everything went successfully, "All Threads Completed Odin PC Log should appear. (Succeed 1 / Failed 0). " The phone must be restarted manually by holding the power button until the screen turns off. Initial loading of the device may take up to 5 minutes.
ATTENTION!
If the device is not loaded for a long time or a data reset was not made, it must be made from the recovery.
To do this, you must simultaneously hold the volume key, the home button and the power button. After downloading, select the item " WIPE DATA / FACTORY RESET", and then - " Reboot System Now." If after these actions, the device also freezes when loading, it is necessary to re-flash it.

Firmware Images:

Firmware Installation Instructions:

Firmware Rules:

- carefully and clearly follow the instructions, all steps must be performed strictly as indicated and with attached files or links
- If there are questions, please use the "" section by asking a question through "")

continued rules ...

You can only install the firmware on the model that is specified in the description, the model must match up to each digit and the letter
- All you do with your smartphone, you do at your own risk! Correspondingly, the author is not responsible for the negative result!
- Charge your smartphone at least 50%
- During the firmware, your smartphone must lie motionless, it is better not to breathe!
- If you doubt somewhere, read again!
- If you did not work, repeat the firmware again, after reading the instruction again!
- Installation of the firmware was checked on the files below to download, apply other files you can at your own risk!

Required files:

1. Create a folder in the root of the hard disk with English letters or numbers (for example: C: \\ i9300)

2. Upload to the created folder everything you need for the firmware on the links below (the latest versions are recommended)

Firmware i9300xxugmk6 (single-name, for Russia)

Preparing for the firmware:

3. Disable superfluous on the computer:

If you have the KIES program installed, then you have 2 options:
- Delete kies.
- Go to the Application Manager (Ctrl + Alt + Del) and complete all the processes where KIES is written

If you have antivirus - turn off it

4. Install the programs necessary for the firmware:

Install SAMSUNG USB Driver For Mobile Phones

Unpack ODIN PC (extract here / extract here)

Unpack the firmware (extract here / extract here)

5. Translate Galaxy S3 to Download Mode:

Fully turn off the phone must go out everything.

Clamp at the same time three keys " Power + volume down + home"

Warning will appear. " Volume up"

6. Installation of firmware via ODIN:

Start ODIN3 (.exe), it must be in the folder of the same name

Press on the field PDA and find the firmware file in format.md5 or.tar, which was saved to the i9300 folder

Connect the phone with original cable to computer, first field ID: Com. Blue lights up

If all previous items are made, click "Start"

After successful completion, you will see an inscription. "Pass!"

Turn off the phone from the computer

7. Loading the phone after firmware
- If everything is done correctly, you will have a download animation and then the device itself has been loaded with a new firmware. Loading takes longer than usual!

8. Other firmware and goodies can be found in the blog, subscribe and participate.

For the current generation of people, the smartphone has become an indispensable assistant and an extremely useful apparatus combining hundreds of various functions. Make a photo, calculate the number of ingredients, set reminders, learn the weather, read the news, chat with friends - this is not a complete list of all that modern smartphones are capable of. Sometimes we just forget that they are not eternal and exposed to gradual wear.

The firmware process is quite busy. QS has a installer in which you can select installation and application options. From the first time with the desired parameters, the firmware did not have (the same, the phone depended when loaded, on the logo samsung). I had to choose more modest - stock parameters. After that, everything worked.

QS-3.3 with stock parameters is very similar to the official firmware Galaxa S3, except that several options have been added (for example, the screen mode in shades of gray, both on Galaxy S5). There are no complaints to its speed. Of course, in this regard, the CyanogenMod interface is more pleasant, but also with this, you can live with the usual interface.

How to flash Galaxy S3?

How to easily flash smartphone

First of all, you need to download a program for flashing to the computer (this article article implies the use of a special ODIN program), the latest version of the firmware for the phone you are interested in and the driver set for the smartphone (for example,). For convenience, place all downloaded files into one folder.
To avoid unforeseen situations while updating software, we recommend to disable antivirus during the procedure.
It is also worth disabled the KIES program (in case it is installed).
After downloading, install all the necessary programs on your computer. Unpack the file with the firmware.
Next, you need to make manipulations with a smartphone, namely translate the phone to download mode. To do this, turn off the device and press the following buttons simultaneously - Menu (Home / Home), Power (Power) and Volume Runner up. Wait for the information message to the mobile phone screen and press the volume key again (Runner Up).
After these action, connect your mobile device to a computer using a USB wire.
Run the ODIN program, then click the PDA button and select a file with the firmware.
Next, click the "Start" button and wait for the software installation. Usually the firmware process lasts about five minutes. At this time, it is important not to disconnect the phone from the computer.
As soon as the operation is completed, the message "Pass" or "Reset" appears on the smartphone screen, and then the phone will reboot.
Disconnect your mobile phone from the computer, close the program and use the stitched smartphone.

It is worth noting that the appeal to software update will entail considerable costs.

You can find in our section.

If your smartphone has been for several years now, and he has already become annoying, can you breathe a new life in it? Make it so that he pleased you again for some other time? Most users will most likely say that no, the smartphone is outdated, it became a little "RAM", the processor is no longer a "cake", the built-in memory is not enough, and the screen resolution has become a cut. I even walked about the lost capacity of the battery. But if you have a popular flagship of past years, then you can do something.

Replacement of Account

In most cases, the first starts to "take" a battery. Year, a maximum of one and a half, and we notice that our smartphone with difficulty "lives" is not the fact that until the evening, but well, that before lunch. If the battery is removable, then the problem is minimized.Some smartphone models will not be difficult to find the original battery. True, the price will not be completely humane. A good alternative will be batteries "Craftmann". Find such a battery will not make problems.

Again, there are many alternative options, consider one of them. This is a monstrous battery, with a declared capacity of 6400 mA / h. Comes with a back cover for a smartphone, in exchange original. When installing all this, the smartphone is urged to complete disgrace, but you get guaranteed two days of work.

You can certainly carry a portable battery with you everywhere, or in the workplace constantly hold the smartphone on charging, but you will agree, each of us wants from your smartphone more autonomy, therefore, the replacement of the battery cannot be avoided, in any case.

Taming or "lagging" firmware

So we came to the most interesting. Most users of the Early Flags of Samsung are sooner or later faced with the problem of "brakes" on their smartphone. Working tables spilled with noticeable slow-moving, "dialer" opened a few seconds, the camera was launched for a long time ... It all started to annoy it, and some users were decided to reflash their smartphone to custom firmware. In our case, all sorts of options are very, very much. The most stable and supported firmware is Cyanogen MOD. Samsung has ceased to update its flagship of 2012 SGS3 for a long time. The latest official version of Android seems 4.2.2. or 4.3.1. But the Cyanogen MOD firmware is already on Android 6.0.1. Of course, the 7th Android will not be more likely for this smartphone, but still for this thanks to developers. But from this year, to the great regret of the lovers of this firmware, the Cyanogen MOD project closed .... The enthusiasts will be possible to release their modifications for a while, but officially, Cyanogen MOD we will no longer get. But there is also good news, instead of Cyanogen MOD, we have LineageOS, and thanks to her, our SGS3 has all received Android 7.1.1 !!!

A brief overview of LineageOS for the 3rd Galaxy.

First, I want to say that the interaction with the smartphone interface does not leave the oppressive impression on the stock firmware. But still, it is not worth waiting a lot, iron is old. The smartphone works quite quickly, but turns on with some delay. The dialer opens faster than in the drain, the working tables are turning smoothly. Applications are open differently, some quickly, and some think about 2-3 seconds. But we have Android 7.1.1! True assembly "Night", that is, some functions of the smartphone and the program can work incorrectly. On the firmware Cyanogen MOD, there were already stable assemblies, and in general, the work of the smartphone was satisfactory. But already enough about Cyanogen MOD, let's study the features of LineageOS firmware. In the smartphone settings, in the "About Phone" section, we can view information about the status of the phone, the device model, version of Android and firmware:
And so the main screen looks like:
A few words about Google applications, after installing Lineageos, they simply do not have them, and we will have to put them on their own. It's just as easy how to install the firmware itself. When you "stitched" on LineageOS, without leaving the recovery, set Gapps (package of programs and services from Google). You can download them. And after installing all this, we will see such a picture: all Google applications will appear on your smartphone!

Unlike MIUI, there are applications menu in our firmware:
The notification curtain, as well as on all smartphones is called swipe from the top of the screen down if you make a short swipe, notifications will open if the icons of different switches will open:

In general, LineageOS firmware is close to "naked" Android, only all sorts of settings will be more. For example, you can change the color of the indicator to various events. In stock, just three colors, but on LineageOS you can mix these colors, as you want.

What else can I tell about this firmware? The camera interface is very primitive. The list of latter running programs looks like on "Golob" Android.

Here are some more screenshots of the battery menu:

And so the settings menu looks like:

In general, everything is simple and functionally, there is even no one for how on Cyanogen MOD, but over time I hope the developers will correct. It remains to solve the main question, how can I install it all? Yes, so that the smartphone did not turn into a "brick"?

Install LineageOS firmware on SGS3

So we came to the most important thing. If you have already installed Custom Recovery, such as TWRP, then everything is very simple. We will do everything in order and without fuss:

3. Copy and copy to the smartphone, to the memory card (Micro SD Card) in the root directory of the firmware. Download the appropriate versions of Android Gapps and copy the Gapps to the smartphone, on the memory card (Micro SD Card) in the root directory.

2. Turn off the smartphone

3. Modern cluster the "Volume +" button, "home" and "switching on" when the Samsung Galaxy S3 logo appears, release the button, and after a few seconds we get to the main menu Recovery.

4. Select the point "Cleaning", then "selective cleaning"

5. Amend the items Dalvik / Art Cache, Cache, Sistem, Data. Item "Internal Memory "can also be cleaned, but not necessarily. The main thing is not to mark the "Micro SD Card" item!

6. The relaxed swipe right give the command to clean.

7. After successful cleaning, we return to the main menu and select the "Install" item, then the item (parent directory) and finally we reached the "external_sd" item. Click it and select the file with the firmware.

8. Again, we make swipes to the right, and wait for the end of the firmware. At the end of this operation, you will be asked to clean Dalvik and Cache. This can be done, but you can ignore.

9. Forbid chosen the "Set" item, then the item (parent directory) and the item "external_sd". Click it and select a file with Gapps.

10. Swipe right confirm the installation.

11. After installing Gapps, you can agree to clear Dalvik and Cache and then, in the main menu, select the "Restart" item and click on the "System" button.

The download process will last for quite a long time. When everything is established, you will be prompted to select a language, set the time and log in to your Google Account. After that, you can familiarize yourself and evaluate LineageOS.