Setting the Wi Fi on the ZTE console. How to configure the ZTE ZXHN H118N Rostelecom router. Briefly about ZTE

The ZTE ZXHN H108N router released last season was widely used in the networks of the largest telecom operators. No exception and provider Ukrtelecom, who recommends acquiring this device to connect to its network and gives it to rent.

The modem supports Internet connection using ADSL technology. It can provide a global network to four subscribers through a wired interface, as well as a device equipped with a WiFi module to create wireless connections.

The presented instruction will show how to configure the ZXHN H108N or the similar device ZXV10 H108L to work with Provider Ukrtelecom. It is worth noting that the WiFi router connection algorithm to the rest of the telecom operators is not very different, so the instructions will be useful and to users of other networks.

To connect the WiFi router to the Ukrtelecom network using ADSL technology, follow these operations:

Connect the power supply to the Wi-Fi modem via the POWER connector, then turn it on to the electrical network.

The LINE port of Splitter in the package of the WiFi router is connected to a telephone socket. Connect the ZXHN H108N or ZXV10 H108L to the port "MODEM", which the necessary socket has the inscription "DSL". In the PHONE port, perform a telephone connection, if it is the conclusion of the contract with Ukrtelecom to provide this type of communication.

To configure the ZTE ZXHN H108N or ZXV10 H108L parameters, connect to it by ethernet cable (available) your computer. This uses port "LAN1" on Wai Fi Modem, and on the PC a network card connector.

Computer settings

In cases where the computer is connected, and the corresponding LAN indicator on the front panel of the WiFi router does not shine, you should configure the PC network card.

Windows 7.

Through the "Start", activate the "Control Panel" and click on "View network status and tasks".

Click on "Changes in Adapter Parameters".

Press PCM to actively connect. A list will appear where to select the value "Properties".

Double click on the "Internet version 4 (TCP / IPv4)" protocol.

Switch the dialog boxes to the state indicated in the following figure.

Fix the changes by clicking on "OK" in all open windows.

In Windows 8 (eight), the setting is performed similarly, but in order to open the "Control Panel" you want to press the PCM on the "Start" menu and select the "All Applications" item where the required link will be.

Connections to the Internet

Setting up ZTE ZXHN H108N or ZXV10 H108L for Ukrtelecom is better from factory settings, so the parameters of the former modem should be reset. To do this, press and hold for at least ten seconds recessed the "Reset" button, and then wait for it to reboot.

Connected to the ADSL technology and the Ethernet computer, the modem cable is configured by the following algorithm:

Enter the device's web interface using the Internet browser, to do this, dial the link 192.168.1.1 and run the transition through it.

We open the browser, enter in the address bar http://192.168.1.1

In the main window of the Wi-Fi-Fi-Fi, go link to the "Interface Setup" tab and click on it, and then on the "Internet" settings.

DHCP.

To configure DHCP connections, change the field values:

PPPoe

Fields change to configure PPPOE:

At the end of the configuration of the required connection, save the change by pressing "Save".

To enter into force, change the WiFi router, turning to the "SysRestArt" item "Maininterface". Here, select "Current Setting" and click on the "Restart" button.

Wait until the end of rebooting ZTE ZXHN H108N or ZXV10 H108L and go online from your computer using ADSL technology.

Wi-Fi Setup

To enable WiFi Wireless Internet Access Functions, you must perform a number of additional actions:

In the Wi-Fi web interface of the router, go to the "Interface Setup" tab, where to open the "Wireless" item.

Configure the following page fields:

Access Point: Activated;
"Wireless Mode": 802.1 1b + G + N;
"Chanel Bandwidth": 20/40 MHz;
"SSID": Your network name displayed in the list of available connections on subscriber devices. It is selected arbitrarily, but only the figures and Latin letters are allowed;
Authentication Type: WPA2-PSK;
Encryption: TKIP / AES;
"Pre-Shared Key": an arbitrary network password, it is allowed to use numbers and Latin letters.

Save the changes by pressing the "Save" button and reboot WiFi modem according to the algorithm specified earlier.

Wait until the end of the reboot and connect your Wi-Fi to the device to the Internet.

Found a typo? Highlight the text and press Ctrl + Enter

The router is network equipment that allows simultaneously multiple devices to access the Internet (computers, tablets, smartphones and much more). Today's assortment of routers allows you to choose exactly what is suitable in a particular case.

Router Review

There are several models that are optimal for home use:

ZTE E5501;
ZTE H118N;
ZTE E5502;
ZTE ZXA10 F660.

ZTE E5501

This device supports multiple interfaces:

4 ports for the RJ-45 connector (which allows you to work with data through the network interface, the cable type is determined automatically);
works according to the 802.11n communication standard (2.4 GHz frequency);
there are two non-removable antennas that ensure the stable Wi-Fi operation.

In addition to supported interfaces, this device has many other options that make it use quite comfortable and simple.

ZTE H118N.

The router of this type in its design has:

USBV.2 in an amount of 1 pieces for connecting 3gModem (optional);
4 ports for connecting the cable, compressed by the RJ-45 connector;
Wi-Fi (IEEE 802.11n).

The maximum data transfer rate by this device is 300 Mbps. Also supported multiple data encryption technologies - WEP, WPA, WPA2.

ZTE 5502.

The router under consideration from such a famous company is nothing inferior to his classmates:

4 ports for connecting the cable through the RG-45 connector;
supports: IEEE 802.11n (maximum transfer rate - 300 Mbps);
there are two antennas for operation in the range of 2.4 GHz;

Encryption capabilities at the device under consideration are the widest:

WEPS encryption technology 64/128 bits;
WPA-PSK;
WPA2-INTERPRISE and many others.

ZTEZXA 10 F660

ZTE router has not only excellent performance, but also a relatively low price.

It is easy to configure, and also supports all the necessary technologies:

there are 4 connections for RG-45;
2 connectors for working with the POTS interface (RG-11);
successfully works with Wi-Fi technology;
there is a connector for connecting USB devices.

Select device

When choosing a router for home, you must consider the following important points:

simplicity of settings - in case of any problems, it was possible to eliminate them without causing a specialist;
price - This issue is especially relevant for those families in which many children;
reliability;
features Wi-Fi module.

The more simple the design of the device, the easier it is to customize it. That is why it is worth paying her preference to those routers that do not require dances with tambourines while connecting and started work. This will save a large amount of time.

Video: How to open the port on the ZTE ZXA10 F660 router

Price range - a very important point. To date, it makes no sense to acquire expensive devices. Since even the younger models in the lineup have on board all that is required for comfortable work with Wi-FiCiet at home. Do not overpay for the brand model - usually such spending are not fully justified.

Choosing the optimal option, it should not be purchased completely cheap models. Since often at extremely low price costs not the highest quality of manufacture, which may result in a breakdown soon.

The Wi-Fi module must necessarily have an antenna located outside the housing. Since this type antennas have a large area. What is very important if the apartment or the house has a big female. Also, the antenna should be removed and replaced if necessary - as it may be necessary to expand the coating zone.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a rather low price (given quite well-defined parameters).

Connection to PC

The simplest part of the ZTE router setting is connected to the PC. This operation is performed in the following order:

Management Settings

How to configure ZTE Wi-Fi router? The settings are managed using a web interface, to get into which is possible through any browser installed on the PC. For example, Internet Explore. In the address bar, you should enter the following combination of numbers and symbols - http://192.168.1.1. If the router is connected to a computer according to the instruction, a window will appear in which you can enter a username and password.

By default, password and login is the word Admin (Latin letters only). When the fields are filled, click the "Login" button. Next will appear window performed in green and white colors.

The tops have the following tabs:

status;
network;
security;
application;
administration.

Each tab makes it possible to manage one or another section.

To configure Wi-Fi, follow these steps:

This list of action includes Wi-Fi.

Separate attention must be given to the section called "Multi-SSID".

Optionally, this section allows you to make a network both open and closed for various kinds of devices:

SsidName- This item allows you to call the custom network to any name;
MaximumClients - the maximum possible number of connected devices at the same time (this model supports 32 pcs.);
Enablessid - switching on, or disabling the variable network;
Hidessid - hiding a wireless network;
Choosessid - selection of a variable Wi-Fi network.

Photo: WiFi Setup on Modem Commercial

The Security section is also present in which you can configure the following items:

When choosing a password, it is desirable to follow the following recommendations:

the presence of lowercase and uppercase letters (randomly);
password length should be at least 10 characters;
the presence of numbers is also desirable.

ZTE Routher Setup for Providers

The ZTE ZXA10 F660 router is configured in different ways, depending on which provider is an Internet service provider (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up working with this operator requires special care, as all nuances should be taken into account:

In the "Multi-SsidSettings" and "Security" section, all settings are installed according to the instructions that came with the device.

Particular attention should be paid to the section "AccessControlList". In the "Mode" item must be set to "BLOCK". "MacAddress" - 00: 13: E0: 81: 97: EE.

Rostelecom

The router setting to work with the Rostelecom provider does not constitute anything complicated.

Next steps:

When the above actions are executed, you should configure the "Multi-SsidSettings" section:

in Choosessid, set the SSID value;
put a tick opposite "enablessid";
"SsidName" allows you to select the network name.

Upon completion of all settings, click the "Submit" button.

MGTS

To correctly configure the router model under consideration with the MGTS rule, you must perform the following actions in a strict order:

This will allow you to activate Wi-Fi. The remaining settings are performed in accordance with the manual attached to the router.

Also, be sure to configure the section called Multi-SSID. This section allows you to install a personal identifier for the network, as well as if you wish to hide it. All tinctures are performed individually, depend on the personal preferences of the user.

Section called "Securiry" Allows you to configure encryption parameters and password to connect to the network.

The ZTEZXA10 F660 router is the optimal device in terms of price-quality ratio. Excellent choice for home and office. This network equipment is easily configured, compact, reliable.

Router Review

There are several models that are optimal for home use:

ZTE E5501;
ZTE H118N;
ZTE E5502;
ZTE ZXA10 F660.

ZTE E5501

This device supports multiple interfaces:

4 ports for the RJ-45 connector (which allows you to work with data through the network interface, the cable type is determined automatically);
works according to the 802.11n communication standard (2.4 GHz frequency);
there are two non-removable antennas that ensure the stable Wi-Fi operation.

In addition to supported interfaces, this device has many other options that make it use quite comfortable and simple.

ZTE H118N.

The router of this type in its design has:

USBV.2 in an amount of 1 pieces for connecting 3gModem (optional);
4 ports for connecting the cable, compressed by the RJ-45 connector;
Wi-Fi (IEEE 802.11n).

The maximum data transfer rate by this device is 300 Mbps. Also supported multiple data encryption technologies - WEP, WPA, WPA2.

ZTE 5502.

The router under consideration from such a famous company is nothing inferior to his classmates:

4 ports for connecting the cable through the RG-45 connector;
supports: IEEE 802.11n (maximum transfer rate - 300 Mbps);
there are two antennas for operation in the range of 2.4 GHz;

Encryption capabilities at the device under consideration are the widest:

WEPS encryption technology 64/128 bits;
WPA-PSK;
WPA2-INTERPRISE and many others.

ZTEZXA 10 F660

ZTE router has not only excellent performance, but also a relatively low price.

It is easy to configure, and also supports all the necessary technologies:

there are 4 connections for RG-45;
2 connectors for working with the POTS interface (RG-11);
successfully works with Wi-Fi technology;
there is a connector for connecting USB devices.

Select device

When choosing a router for home, you must consider the following important points:

simplicity of settings - in case of any problems, it was possible to eliminate them without causing a specialist;
price - This issue is especially relevant for those families in which many children;
reliability;
features Wi-Fi module.

Video: How to open the port on the ZTE ZXA10 F660 router

Choosing the optimal option, it should not be purchased completely cheap models. Since often at extremely low price costs not the highest quality of manufacture, which may result in a breakdown soon.

The optimal choice in all respects is the ZTE ZXA10 F660 router. It has many advantages, as well as a rather low price (given quite well-defined parameters).

Connection to PC

The simplest part of the ZTE router setting is connected to the PC. This operation is performed in the following order:

Management Settings

By default, password and login is the word Admin (Latin letters only). When the fields are filled, click the "Login" button. Next will appear window performed in green and white colors.

The tops have the following tabs:

status;
network;
security;
application;
administration.

Each tab makes it possible to manage one or another section.

To configure Wi-Fi, follow these steps:

This list of action includes Wi-Fi.

Separate attention must be given to the section called "Multi-SSID".

Optionally, this section allows you to make a network both open and closed for various kinds of devices:

SsidName- This item allows you to call the custom network to any name;
MaximumClients - the maximum possible number of connected devices at the same time (this model supports 32 pcs.);
Enablessid - switching on, or disabling the variable network;
Hidessid - hiding a wireless network;
Choosessid - selection of a variable Wi-Fi network.

The Security section is also present in which you can configure the following items:

When choosing a password, it is desirable to follow the following recommendations:

the presence of lowercase and uppercase letters (randomly);
password length should be at least 10 characters;
the presence of numbers is also desirable.

ZTE Routher Setup for Providers

The ZTE ZXA10 F660 router is configured in different ways, depending on which provider is an Internet service provider (MGTS, Rostelecom, Ukrtelecom).

Ukrtelecom

Setting up working with this operator requires special care, as all nuances should be taken into account:

in the "Network" section, you must open the Count "WLAN";
putting a tick opposite "EnableDwireless", you can activate Wi-Fi;
item "Mode" makes it possible to choose the mode of operation - "Mixed";
selection of the region - "Country";
"Bandwidth" - a range of work (40 MHz);
"Chanel" - channel, you need to set the "AUTO" mode;
the "Submit" button allows you to complete the setting and save it.

In the "Multi-SsidSettings" and "Security" section, all settings are installed according to the instructions that came with the device.

Particular attention should be paid to the section "AccessControlList". In the "Mode" item must be set to "BLOCK". "MacAddress" - 00: 13: E0: 81: 97: EE.

Rostelecom

The router setting to work with the Rostelecom provider does not constitute anything complicated.

Next steps:

When the above actions are executed, you should configure the "Multi-SsidSettings" section:

in Choosessid, set the SSID value;
put a tick opposite "enablessid";
"SsidName" allows you to select the network name.

Upon completion of all settings, click the "Submit" button.

MGTS

To correctly configure the router model under consideration with the MGTS rule, you must perform the following actions in a strict order:

This will allow you to activate Wi-Fi. The remaining settings are performed in accordance with the manual attached to the router.

Section called "Securiry" Allows you to configure encryption parameters and password to connect to the network.

The ZTEZXA10 F660 router is the optimal device in terms of price-quality ratio. Excellent choice for home and office. This network equipment is easily configured, compact, reliable.

ZTE routers are known to the Russians. MegaFon supplies subscribers by mobile variants, catching an exclusively cellular network. Reception speed reaches 150 Mbps. The modem distributes wireless Internet. The portable option is often the choice of remote relatively small settlements. Residents of Udmurtia are now familiar with MR150-5. Region, north of which is only forests and tundra.

Chinese ZTE products are relatively low cost, availability. The advantages of 4G mobile communications rated even the arrestants. Recently, the attackers tried to convey the Tula colony of 29 ZTE routers. The valiant law enforcement guards managed to prevent illegal transaction. Let's see how it is to configure the router. Often the audience is interested in the instruction of the password change.

Briefly about ZTE

In addition to routers, predominantly mobile, feed subscribers with Wi-Fi, the Chinese corporation supplies a full range of user equipment, including the IPTV digital television consoles. Over half of the released products serves provider networks. Many Chinese telecommunications service providers now use domestic equipment.

The history of ZTE exceeds 30 years. One of the investors was the Ministry of Aerospace Industry of China. Initially, the main income was consumer goods, however, a rapidly developing branch of communication was loaded by an enterprise with state-owned orders for CDMA cellular networks. For 2006, 40% of the enterprise's income concerned the equipment of operators. In parallel, suggestions of foreign companies. The first became Canadian Telus.

A year later, Chinese equipment ordered Vodafone (United Kingdom), Telefonica (Spain), Telstra (Austria). The 2008 client base contained customers from 140 countries of the world. ZTE ranked third in the market of manufacturers of the GSM connector equipment (about 20% of world sales). Gradually, the company mastered the release of smartphones. Corporation engineers filed over 48 thousand patents, only in two years (2011-2012) were confirmed by 13,000.

Sometimes the company's equipment does not work ...

Define title

First of all, determine the true name of the device. For example, MF920W providers are called as follows:

MTS - 835F.
Yota - MF920.
MegaFon - MR150-5

A thorough study of the issue will help choose the firmware. The incorrect version is able to cause the disability of the device. Such iron does not turn on, you will need to flash. By the way, the advance studies of the forum will show the potential buyer current model problems. For example, the above mentioned above is often deprived of the charger, there is no antenna output. Therefore, for the cottages, pick a different model. An additional bonus - modem refuse to identify amateur flashing utilities.

The nuances marked by users will sometimes become the main criterion. Interested in sales of Clerk Salon Communications, it will be unlikely to advertise the dark side of the equipment. For example, MF823 requires a Beeline card with a USIM sticker. Otherwise, 3G technologies are used instead of the fourth generation. There are no updated firmware versions.

Common problems

Economic readers' time, caring admin set the plugin, drawing a convenient navigation according to the shaped tree of subtitles. Therefore, each problem devote a separate small section. ZTE preferably produces mobile modems, sometimes complementing the GPON fiber optic line interface.

Do not turn on

First of all, I remember whether the flashing was carried out. Unsuccessful manually spent - the operation removes access to the router completely. It is noteworthy that the appearance of the device (indication, the ethernet interface illumination) former. However, connect to the PC router, the equipment is impossible. Browser writes: Unable to Connect.

Hardware RESET button Reset is powerless to solve the problem. You should update the firmware. Trustholders supply specialized utilities that help savvy technical personnel solve the problem. However, the Chinese manufacturer is still poking. The hackers have released the ZTE Unlocker utility, but the interface is exclusively engaged in an unlocking issue (bump from a particular provider). The actively exploits the specification of the diagnostic port.

The working device understands the language of the terminal, including the Windows command prompt. The operating system highlights the device a virtual directory within which the command router stored memory is performed. For example, ADB Shell. However, the standard control paths will refuse to help restore the firmware on the router. Enthusiasts offer the following option.

Sometimes the desire to unlock is caused by another. For example, the developer has removed support for the FTTB H108N model. All interface users were forced to make a rollback immediately. Only now ... the manufacturer laid out one utility - a producing upgrade. One way ticket.

Recovery utility

Often a broken ZTE-modem is determined by the diagnostic interface. The official website (ZTedEvice) provides MF30 (Beeline) solely to the update utility. Other models are missing at all! Site 3GINFO.ru offers the desires to download: "ZTE MF30 recovery kit.

Now the folder containing the previously unpacked image of the firmware needs correction. I read the memory of the device, adjusting the contents of the internal directory. However, the utility is powerless to enter IMEI. Therefore, independently edit the Channel1.nvm file. Enter the correct IMEI.

Now launch any flashing utility (for example, 3Ginfo.ru/downloads127.html). Spell program files, including edited channel1.nvm. Now the router is finally restored.

A similar sequence of actions helps to reanimate some other mobile access points (for example, MF90).

Jtag.

Many killed devices helps to return life. Briefly describe the essence. In the 80s of the twentieth century, the switching standards of integrated circuits were devoid of debug interface. Therefore, in 1985, they created a special JTAG group to solve the problem. Industrial Standard became commercial (IEEE 1149.1-1990) in 1990. Intel immediately provided generation of processors 486 by the debug interface.

Now the standard is used by electronics manufacturers everywhere. Initially, the interface belonged exclusively to the objectives of testing. Then the ability to interested debuggers, including the level of machine codes. Later, manufacturers guessed to operate JTAG, updating the firmware of flash memory microcircuits. Real boards use the number of pins:

5 and so on.

Recent options are more often used in the presence of many parallel microcircuits. The first option accompanies the topology "Star". Consequently, the problem is limited by the calculation of the location of the JTAG Pins. Modern interfaces often contain 10 or more contacts, so bother to find technical documentation that reveals the meaning of contact pads. The contacts themselves are round or rectangular, are located more often along the edge, sometimes with two rows.

It is difficult to find the pickup, since the sabech is the bread of repair shops. Try to pose thematic forums (for example, GSmforum.ru). You also need a complete memory dump, take, for example, here 4pda.ru/forum/index.php?showtopic\u003d255231&st\u003d3040#Entry36468746. The current memory dump (about the reserve) merges the H-JTAG utility. It will take the transition connector (the type is entirely determined by the utility being used to restore). The craftsmen usually adapt now outdated LPT. Spread the adapter with shunt resistors, get a specialized software (for example, Z_FLASher Reanimator is used when restoring cellular USB modems).

The dump of the memory utility GiveIO helps to find out the type of processor. It will be needed later when flashing. So, you need to work:

Backup utility current dump memory.
Compatible modem firmware version. Try to go to BYFLY. The FTP server provides a specific selection: H208N, ZXHN H208L, H201L, W300. By the way, the Belarusians were worked out in the shared server folder (ftp.byfly.by/byfly/firmware_modem/zte/) lay out a set of a beginner resuscator that includes instructions.
Refrigerate utility via the JTAG interface.
Connector collected with his own hands. Detailed requirements for the adapter makes a utility. Above the use of LPT.

Along the way, you exploit the capabilities of auxiliary software. For example, determining the type of processor.

Does not allow in settings

A live router is available through a browser, or remote administration interfaces (Telnet, SSH). However, the administant does not start inside. Probably the factory settings are changed. After making sure the provider's recorded password, try reset the device with the RESET key (otherwise you will lose the Internet until the mom's arrival). Then the previous characteristics of the equipment will be returned:

IP address.
Login.
Password.
SSID, security key on Wi-Fi.

Refuses to distribute wi-fi

UKTERCOM subscribers poured TP complaints: ZTE H108L refuses to connect wireless subscribers (Wireless). You will need to change the settings.

Open the admin panel (192.168.1.1 in the browser).
Enter login / password (admin).
Click Administration → System Management → Restore Factory Settings.
Apply the changes, wait for the reboot.
Re-enter ADSL Username / Password.
Stop the following Administration Page Settings → TR-069:
1. ACS URL - HTTPS: // Localhost
2. Login - Loose.
3. Password - 12345678.

Sprinkle ports

Often it is required from the outside to pose a home PC, to organize a server. Network protocols are used by the magnitude of the communication ports. In the modem, initially defense against hackers is laid. There is no access inside (intranet). Therefore, the availability of ports must be configured. We will demonstrate the settings technique by enhancing the example of H118N.

Note. The specified model shares Ethernet. Previous (H108N) is equipped with two interfaces: FTTB, ADSL.

The simplest option to defeat iron Rostelecom is to use the embedded menu app. Activate UPNP subsection. The port number is set in a digit. A slightly lower is a specialized section. Menu The ports of ports will help set the desired numbers. Target to install a check mark.

The third way is to configure a demilitarized zone. Creating a dedicated service helps to limit damage to a possible hacker attack. Settings former:

Connection type + port (one line).
Local IP address of PC.

Note. Sometimes the ports of ports translators are called redirection.

Previously check the functionality of the outside the service provided within the network. It will help to reduce the time of adjustment.

Unlocking

It happens, sometimes a subscriber will want to change the provider. I bought the MF823D, I was impatient to go to iota, or I was tired of MGTS, and F670 refuses to eat someone else's SIM card. To change the service provider, you should unlock iron. Megaphone MF823 calls M100-3 - the essence of the previous one. Unlocking closely concerns flashing questions. A binary image is selected that is not tied to the provider.

Attention! Before the firmware, carefully learn the forums. Some homegrown versions are violated partially efficiency. Example - H118NV2.0.1D_E04_OV DOMRU removes a web interface (via browser). Telnet access remains. You have to reflash.

Instructing: model MF823D

It will take the image of the firmware. Get using the search engines.

Swing the emulator of the Putty terminal.
Install the ZTE diagnostic mode driver.
Turn on the equipment.
We feed the browser an intricate link 192.168.0.1/goform/goform_Process?goformid\u003dMode_Switch&switchcmd\u003dFactory.
The modem will send an answer containing a line approx.

Iron must go to the diagnostic mode. Check by opening Windows Task Manager. Properties contain a serial port number, opposite the corresponding COM, the inscription ZTE Diagnostic Interface must be brought.

Open the PUTTY terminal, copy the image to the serial port, the number of which shows the task manager. It remains to rescue the device from the diagnostic mode. Open the Syznov Terminal, set the mode parameters:

Protocol - Serial (serial port).
COM line number (according to the task manager mentioned above).
Speed \u200b\u200bTry to put 921600.

The terminal window will be completely empty. Drink alternately commands, I press ENTER each time:

AT + ZCDRUN \u003d 8
AT + ZCDRUN \u003d F

Each time the response of a device containing the number of successful failed operations can occur. The operation is completed. Restart the device.

ZTE MF90 + Modem

Install the router using instructions.
Open the admin panel through the browser (M.Home, or the IP address specified by the manufacturer).
Configure access to Wi-Fi. Open the web interface (by entering the adminka login / password). Leave one device in this position. Later it will be possible to use a graphic shell, although the connected PC cable will stop opening the menu.
Browse (via cable) We feed the translation rows to the diagnostic mode: M.Home / Goform / Goform_Process? Goformid \u003d Mode_Switch & Switchcmd \u003d Factory.
The successful end of the operation is completed by the answer ("Result": "Factory: OK").
Now the device dispatcher contains unidentified objects. A diagnostic mode driver is required. Install the required software.
After defining devices, the question marks will disappear. Select ZTE Mobile Broadcast Diagnostic Port. Look at the number among LPT / COM. Find out the exact name, for example, COM9.

Find the image of the firmware. Open any terminal (including the Windows command prompt). Copy the image from the directory to the serial port defined earlier. For example:

copy / B.<имя_образа> \\\\. \\ COM9

Selecting the port number has previously illustrated, the name of the image is known, including the location. Prefix / B means binary mode of the transfer operation (since the firmware file has a binary format). Restart the device.