How to remove a ringtone from the list of smartphone ringtones. Changing or removing built-in ringtones, notifications and system sounds on your Android smartphone. Instructions for removal

Articles and Lifehaki.

Modern mobile devices equipped with Flash cards please their owners to significantly expand the amount of memory, including to download and listen to music.

In addition, many users are interested in how to remove native melodies from their cellular device.

The ability to expand memory depends on what kind of model of the phone we use, because they are all designed for various memory cards.

Well, what if our mobile device does not at all support memory cards? In this case, the question of the search for additional megabytes becomes sufficiently pressing, and the removal of standard melodies and gaming applications will turn out to be more in use.

As you know, the memory on the mobile device does not happen much. Before its owner, there is a regular question about what else to remove. Unfortunately, it is not so easy to get rid of standard melodies. How to do it?

Instructions for removal

For a start, go to the menu, we are looking for a section with standard melodies and sound signals, after which we try to remove them in the usual way. Unfortunately, not all models of mobile devices allow it to do.
If you remove the standard melody on our device in the usual way, we can move to the following actions.
We are looking for delivery to the USB drive phone and install them on your computer. There may be programs for synchronization; Install them also.
If the installation disk and the DATA cable are missing, we purchase them separately and produce the specified actions.
We connect a mobile device to a PC via USB cord and carry out synchronization.
Run the installed software and open the menu from the desktop computer with standard melodies. Remove them straight from there.
Some cellular models do not allow remove native melodies with a PC, but allow them to be replaced by their files of a smaller volume.
Create files and rename them similarly to how standard melodies are called (not forgetting both expansion). Copy them with the replacement of initial melodies.

But what if all the described methods proved useless? In extreme cases, you can try to re-flash your mobile device.

Phone firmware

Obviously, it is best to entrust this operation to professionals and contact the service center.
However, subject to certain skills it can be done independently - however, it will remain the risk of imparting irreparable damage to its mobile device.
Today in the network you can find any firmware you need without standard pictures, melodies and gaming applications. In this case, check its compliance of our phone model.
For firmware use special software. If it still remains at least the slightest doubt in their own power, it is better not to risk and act as described above - to contact a specialist who will produce the necessary manipulations for a completely moderate amount.

Hey! Most recently, we installed our own ringtone on the iPhone and, despite all the difficulties, we still managed to do it. But after all, the tastes of a person are constantly changing - I, for example, I already tired of the song that I recently installed on the call. I want to understand something new!

Well, something new to create is not a problem (), but what to do with the old ringtone, which is no longer needed? Options are not so much - leave or delete. If you leave, it will take the precious internal memory. Therefore, we will delete. And here, Apple again, everything should be in the way.

Why? Because it's not at all seriously ...

You can not just take and remove ringtone with the iPhone. Well, there is no such option in the iPhone settings!

But how to be then? Now I'll tell you everything and show. Go!

We will consider only the official method (without jailbreaks and other nonsenses). After all, the jailbreak is practically "dead", and this method of removing ringtones will live forever :)

As usual, in order for the information to be as truth and tested on personal experience, I will do all manipulations with you.

So, I have two "unnecessary" ringtones in my iPhone:

Made and loaded alone through iTunes.
Bought at the official store iTunes Store. Price, by other, 22 rubles! But for Kipelova, even "Filnik" is not a pity :)

Task: Delete these ringtones for a call.

Now I just went!

Step 1 (connect iPhone to iTunes).There should be no problems here - we take the wire (better original), connect the iPhone to the computer and run iTunes.

Step 2 (very important moment!).After starting iTunes, click on the phone image in the upper left corner.

And then, at the bottom, we install a tick opposite the item "handle music and video manually" and click "Apply".

Step 3 (open sound control). We do not go anywhere and look at the left side menu - we are interested in the line "Sounds". We choose it - the right appears a list of all ringtones that have been downloaded to your iPhone.

Step 4 (Remove ringtones). Click on any of these ringtones with the right mouse button, select the item "Remove from the library" and click "synchronize".

Everything! We take the iPhone in your hands, open "Settings - Sounds, Tactile Signals - Ringtone" and see that this sound is no longer. Hooray! Although…

Always any problems may arise - where without them? :) And that's what you can do if the described instruction does not help:

Try to install another build of iTunes. The fact is that the latest versions of the program (12.7 and older) are "trimmed" - Apple has removed from them a lot of functions. Therefore, and already with it, we try to remove the ringtone.
Try to erase the sound using the same program through which it was originally loaded into the iPhone. Because if the ringtone was installed using a third-party program (for example, ifunBox), then iTunes may not cope with the removal of such melodies.

Anyway, nothing works? Well, you can always ask a question in the comments (preferably, more or less in detail describing your situation) - Let's try to deal with the problem all together!

[Tip] Changing or removing embedded ringtones, notifications and system sounds on your Android smartphone

Each mobile phone, whether it is a new touchscreen smartphone or an old push-button phone with sweets, comes with some built-in (default) melodies, sounds of notifications and system sounds, such as the sound clip that you listen to when you turn / turn off your mobile phone Telephone when you connect your mobile phone to the charger when you make a snapshot using a mobile camera when the battery is discharged when you install the phone's volume at full power, etc.

Some sounds, such as phone call melody, message notification, etc., can be configured and modified using a mobile phone settings, but there are many sounds that cannot be changed or disable if you do not switch your mobile phone into a silent mode.

This tutorial will help you in:

Changing the built-in call melodies, notifications and sound signals
Add / delete / disable built-in call melodies, notifications and sound system interface sounds
Disable / shift the phone launch (switching on) and shutdown (off) animations and sounds

Thus, without losing time, you can start a tutorial:

DENIAL OF RESPONSIBILITY: This process is very advanced and dangerous. If you are an expert in the field of mobile devices and can easily customize / configure mobile phones, follow this manual. We are not responsible for damage to your device after the incorrect follows to this manual, so use it at your own risk.

STEP 1:

First of all, you need to get root rights to your Android mobile phone to be able to change or delete built-in melodies and sound clips. You can learn more about the routing of Android phones at the following links:

A WARNING: Android mobile phone correction is a risky task and can cancel the warranty or damage your device. So root your mobile phone, only if you are sure and know what you are going to do with your mobile phone.

Step 2:

Now we need to install the Root Explorer application to view the firmware folders in your mobile phone.

If the Root Explorer application has already been installed on your mobile phone, you can go to STEP3.

If you do not have this application on your mobile phone, you can set the following application called " root browser", Which is a free app:

We also used this app on our test mobile phones, and it worked flawlessly.

Step 3:

Now we need to go to the "Media" folder, which contains all the built-in melodies and sounds of notifications that reproduces the phone. To go to the Media folder, open the Root Browser application and go to the following folder:

system -\u003e Multimedia -\u003e Audio

Under " audio"You will see the following folders:

Notifications
Ringtones

"Notifications"Contains all the audio clips that you see when trying to configure the sound of notifications in the phone settings. Sound clips are stored in Ogg format. You can delete any needed audio clip or replace an existing file.ogg to any new file .ogg. If you want, you can insert new files .ogg in this folder, and this new sound will appear in the phone settings when you try to change the sound notification message.

"Ringtones"Contains all the built-in call melodies that you see when trying to configure the melody of a mobile phone call using the phone settings. As mentioned above, you can add, delete or replace existing files.ogg.

"uI"Contains all system sounds such as camera shutter sound, low battery charge warning, charger connection, dialer, keyboard type, power on / off, etc. You can delete any needed audio clip or replace it with any desired file.ogg .

PS: If you want to disable any specific sound, such as sound when you start the phone (power on when you turn on) or connect the charger, instead of deleting the corresponding file.ogg, you can simply rename the file. This will immediately turn off this sound in your mobile phone. In the future, if you want to turn on this sound again, you can restore this name .ogg fie.

Are you tired of standard notifications on your phone? Want something more exciting? Then you got into the right place! Below you read our advice as you can change the tonal signals of the notifications of your Android-Device.

Changing Android Notifications Signal by default

All Android devices will play the default sound of notifications if the specific application does not use another signal. If you want to change the sound of notifications, you will need to perform these actions:

Open Android settings.
Click on the "Sounds and Notifications" section.
Select "Sound Default Notifications".
A list of different sounds of notifications will appear. Click on any option to listen to it and then click on the "OK" icon to confirm the selection.

Depending on the version of Android and the phone manufacturer, the name of this parameter may differ slightly, or you probably have to search it elsewhere. For example, on the LG G4, in which there is Android 6.0 Marshmallow, you need to open the settings, then select "Sounds and Notifications", then "Ringtone".

Changing the notifications for applications

Applications such as Facebook or Gmail have their own sounds of notifications, and you can easily change them. Note that the procedure may differ depending on a particular application. For example, we take whatsapp:

Open WhatsApp application.
Click on the icon in the form of three points in the upper right corner of the display.
Click on "Settings", then on "Notifications".

A list of different melodies will appear. Choose your favorite melody and then click OK. If you do not like the available sounds, you can also create your own options.

Creating your own android notifications

Of course, you should not limit yourself with the current sound signals - you can also create and use your own! Connect your Android smartphone to a PC, open the main internal memory folder and then go to the "Notifications" folder. If such a folder for some reason does not exist, it can be created. Copy your selected audio files to this folder, and they will be available to select on your phone. We will add that you can also use the Zedge app, with a variety of free sounds for notifications.

Are you satisfied with your sounds for default notifications? Are you planning to create your own? Tell us about it in the comments.

Articles and Lifehaki.

With an unsuccessful attempt to establish your melody, many think where the ringtones are stored in android. For example, downloaded music is not displayed when setting the message signal, although it is in the device's memory.

Of course, you can not strain and put a standard signal, but you always want to stand out and install something.

Then for this you have to create several folders, sorting music over these folders, but then you can put any song, even on the call, at least to the message.

Where are the ringtones to messages

To set your music to notify the SMS, you need to create a "media" folder in the root of the SDCard, in it - the "Audio" folder, and in it - "Notifications". In the last and throw the right music.
Now open the "Message Settings", at the bottom find the string "signal melody". Now not only standard sounds are displayed here, but those that you placed in "Notifications" are displayed.
Similarly, you can understand where ringtones for alarm clock and call are stored. In the first case, instead of "notifications", make "Alarms", and in the second - "Ringtones". Now every melody will have its own place.

How to install ringtone on a call

In the main menu, find the "Music" section, in some versions it is called "Player".
From the list of songs, select the desired one and delay your finger on it.
From the dropping window, find the line "Put the call" and click on it.
Now this song will play when someone gets your room.
Immediately you can choose the sound for one specific contact. And when this subscriber will call you, an absolutely different ringtone will play on the phone.

You can install the ringtone through the File Manager. To do this, go to "My Files", find the folder where the necessary music is. Hold your finger on the track, and soon the window will pop up offering "to use as a signal".

Selecting this item, you install your music on the call. The string "Use as a signal" on some devices is hidden under the guise of three vertical points located at the bottom of the screen.