Contacts

Magnetic adapter for Lightning Innozone cable - silver. Znaps. Magnetic Charging Success Chronology for iPhone

Magnetic adapter for microUSB cable. Allows you to connect and hold the cable without pushing the plug in the phone connector, and by a magnet located in the adapter, cling to the cable. The idea is not new - the Apple's nutrition connector also works.

As with many other comfortable and simple (cheap in realization) ideas on Kickstarter, the price tag was quite spontaneous (remember at least a button for which you initially wanted $ 27, and the Chinese on Ali are selling them now). So it remained only to wait until the Middlewealth can establish mass production.

Adapters have come in simple compact packages:

The size of the adapter (magnetic part) 21 x 13 x 6 mm. The plug is non-magnetic, so it can be safely left in the phone and wearing with sensitive to the magnetic field of things (if any).




The thickness of the phone protruding outside the plug is 2.1 mm. In the phone with bumper it is not even visible:




In the main part there is a green LED, which is constantly glowing when the adapter is connected to the cable.


Connection, like Magsafe or USB Type C, bilateral, i.e. You can not worry about which part to bring cable to the phone - as it will stick, so it will be. But here the first problem opens: when connecting one side, it is also charged and data transmission, and when you connect the reverse side, only charging - Windows provides an error - unknown device detected. Apparently, the Chinese put on something with a wiring. The problem is reproduced with other devices (for example, the keyboard with a Micro-USB connector and the pocket reproduced). In the multimeter, the battery died, so I can not ring / check yet (probably, later I will add an overview).
UPD: After the transclon, it was found that the contact pads for D + and D-plug for both orientations are in the same place, i.e. When the D + plug is turned over and is confused by places.

The following is found from small jambs:
1. Due to the fact that the magnet is only in one part, the connection is obtained weak, so the cable must at least partially lie on one surface with a connected device. If the phone, for example, lies on the edge of the table with a connector to the edge, and the cable is connected and hangs off the table, then it can fall off under its own weight.

2. Weak mechanical contact with the adapter. If the connected phone is to pull along the direction of the cable / adapter, that is, the chance that the magnetic connection between the adapter and the telephone "subwit" is a mechanical connection between the adapter and the cable, and the adapter will sharpen together with the phone from the cable. This can be easily cured by fueling the Micro-USB housing of the connector in the adapter, thereby reducing the clearance and increasing the clutch.

3. The plug on the contrary - very tightly sits in the phone. And even though it is provided on the sides of the chamfer for convenient removal by nails, it is still quite difficult to get from there because of its sizes (the usual cable with the same plug to pull out wages). Therefore, it is better to stock as something for convenient extracting of the asshole.

Outcome

Pros:
- Beautiful
- prolongs life to your connector
- save the phone and connecting the cable with a random jerk

Minuses:
- data transmission works only in one orientation
- a weak magnet at the adapter
- weak micro-usb connector with adapter
- difficulties with the extraction of the plug (due to dimensions)

All beaver.

I plan to buy +21 Add to favourites I liked the review +37 +60

Thanks to the new project on the Kickstarter crowdference platform, each owner of mobile devices will be able to try out the MAGSAFE technology on the usual charging cable for iOS and Android devices.

Since 2006, MAGSAFE technology has been protecting MacBook from random damage in the event of a sharp breakdown of the cord. Almost any ordinary laptop will simply fall along with the power cord, while contacting the power connector in Apple laptops is carried out by magnets. Unfortunately, in the new on-site MAGSAFE technology, the updated USB Type C port came. But if you cannot return the magnetic connector in the MacBook, then everything is much easier with mobile devices.

Znaps. Allows you to use the possibility of MAGSAFE on conventional smartphones and tablets. The novelty is made in the form of a special adapter consisting of two parts: one part is inserted into the Lightning port on the iPhone or iPad (Connector), and the second is to the standard charge plug, which is complete with any Apple mobile device. It is enough to bring the plug to the device with znaps, as they immediately live together to each other, by analogy with Magsafe.

All the charm of the novelty is that the case Znaps. Got minimal dimensions and identical accessories Apple design. The height of the adapter is only 15 mm, and in thickness it does not go beyond the dimensions of the charging plug. On the housing Znaps. Even there is a status indicator that displays the charging process of the device.

Connector has a rubberized ring that does not pass moisture inside the connector. Znaps.Thanks to its compact sizes, compatible with all types of covers for iPhone and iPad. You can buy several Connector for all your devices that will later need to be brought to charging with the adapter.

Something similar we have already seen for both iPhone () and for 3.5 mm connectors (). Znaps compared to them has a number of advantages: design, dimensions and of course the main trump card is the price. Basic equipment Znaps. (Adapter + Connector) is estimated by the developers of only $ 9, and the delivery to any of the CIS countries will be $ 3. Paying $ 21 you get Znaps. With keychain keys for keys.

There is a version Znaps. And for Android devices with microUSB.

The project has already collected the amount exceeding several times the originally required for the start of production, which indicates the tremendous popularity of the project.

Thanks to the new project on the Kickstarter crowdference platform, each owner of mobile devices will be able to try out the MAGSAFE technology on the usual charging cable for iOS and Android devices.

Since 2006, MAGSAFE technology has been protecting MacBook from random damage in the event of a sharp breakdown of the cord. Almost any ordinary laptop will simply fall along with the power cord, while contacting the power connector in Apple laptops is carried out by magnets. Unfortunately, in the new MacBook 12, the updated USB Type C technology came to the Magsafe technology. But if you cannot return the magnetic connector in MacBook, it is still much simpler with mobile devices.


Znaps. Allows you to use the possibility of MAGSAFE on conventional smartphones and tablets. The novelty is made in the form of a special adapter consisting of two parts: one part is inserted into the Lightning port on the iPhone or iPad (Connector), and the second is to the standard charge plug, which is complete with any Apple mobile device. It is enough to bring the plug to the device with znaps, as they immediately live together to each other, by analogy with Magsafe.


All the charm of the novelty is that the case Znaps. Got minimal dimensions and identical accessories Apple design. The height of the adapter is only 15 mm, and in thickness it does not go beyond the dimensions of the charging plug. On the housing Znaps. Even there is a status indicator that displays the charging process of the device.


Connector has a rubberized ring that does not pass moisture inside the connector. Znaps.Thanks to its compact sizes, compatible with all types of covers for iPhone and iPad. You can buy several Connector for all your devices that will later need to be brought to charging with the adapter.


Something similar we have already seen for the iPhone (Cabin + dock) and for 3.5-mm connectors (Magzet). Znaps compared to them has a number of advantages: design, dimensions and of course the main trump card is the price. Basic equipment Znaps. (Adapter + Connector) is estimated by the developers of only $ 9, and the delivery to any of the CIS countries will be $ 3. Paying $ 21 you get Znaps. With keychain keys for keys.


There is a version Znaps. And for Android devices with microUSB.


The project has already collected the amount exceeding several times the originally required for the start of production, which indicates the tremendous popularity of the project.

The collection of funds for a compact adapter ZNAPS successfully completed a month later. The fees exceeded the scheduled amount of 30 times.

Znaps is a small magnetic adapter, allowing you to look at the iPhone charging process. The adapter consists of two pieces. The first is inserted into the Lightning connector, the second is put on the cable itself. After simple manipulations, the user gets the opportunity to put the phone for charging without looking.

The adapter works fully and not only charging the phone, but also allows it to synchronize it. A week before the campaign is completed, the required amount has collected to obtain a MFI license. Message "This accessory is probably not supported" ordered accessory does not bother.

The required amount for sending an adapter into production was achieved on the second day. The creators decided not to stop on the achieved and planned Znaps add-ons after reaching a certain amount. The initiative justified itself. By August 15, the project was supported 70122 man. The assembled amount was $3,007,370 . Intended users will eventually receive a more interesting accessory than planned at the very beginning.

  • $ 200,000 - added black adapter color.
  • $ 300,000 - added gold color adapter.
  • $ 800,000 - added second LED indicator.
  • $ 1,000,000 - Added Coloring Avengers.
  • $ 2,000,000 - the development of the USB-C adapter is declared.
  • $ 2,400,000 - licensing on MFI program and micro-USB exclusive colors.
  • $ 3,000,000 - Development of ZNAPS-AUX.

The adapter has a number of advantages that allocated developers. The unusual accessory itself is its feature, but there are more serious points.

  • Compactness.
  • Availability.
  • Light connection.
  • Protection against water.
  • Charging indicator.
  • Save cable.
  • Lightning / Micro-USB connectors.
  • Synchronization with a computer.
  • Connect to any side.

Znaps production will begin in early October. Delivery of first parties is scheduled for the first numbers of December 2015. [Kickstarter]

Put the rating.

very convenient to use. I liked the magnet.

Minuses

i had to buy 2pcs right away, there is no possibility to buy 2 cables and one plug (which is placed inside the phone)

Review

i heard a lot about the cable on the magnet. Never before used. I wanted to buy one cable, but the seller explained very promptly that the benefits of this cable would be tangible only if there were 2 or more. The thing is that the plug that is placed inside the phone is very tight there to sit there. And it is necessary to remove it only as a last resort. So, there is once placing it inside, pull it out sooo hard, and without a thin durable subject, it is not necessary. Having installed it, I forgot what it means to look for a cable, think about how to connect it - pick up the cable to the bodies and it is a magnet itself. Taking advantage of cables for more than six months - I am still satisfied. Never after the purchase did not drop down on charging. The second cable left in the car - a great solution - the phone located in the holder no longer need to put and remove the cable, with short trips - one pleasure - took off the phone - the phone in his hands. Purchase is very pleased.



Did you like the article? Share it