Program for constructing sweeps of ventilation. To help engineer, designer, technologist (free programs). Library of technological equipment

We are ready to place your examples of engineering calculations or written programs that can be useful for designers and technologists. Write to the address:

Library of technological equipment

The library of technological equipment is designed to compile technological layouts. Works in ZWCAD, AutoCAD Lt, AutoCAD. Tested in versions until 2008 should work in versions of the newer.

Installation and conditions are given in the archive.

For 50 years of labor activity - 15 years are devoted to OJSC Izhmash, instrumental production (engineer-technologist - I.O. Nach. PTB), 30 years old worked in the design institutes by Ipromashprom, SoyuzShproekt, Promproekt, NIPINEFT, Izhmaashproekt in posts from Art. engineer to ch. Specialist technologist. The main specialist worked for 21 years (in 3 institutes).

* Using free versions of products is governed by the terms of the license agreement with the end users attached when they are loaded.

Autodesk Freewheel

Autodesk Freewheel is a free web service for sharing and for sharing 2D and 3D projects created in AutoCAD or other Autodesk applications.
DWF project files can be posted in a free online service, and from there can easily be open for interactive viewing and printing. It does not require the download of additional software. This web service automatically generates unique encrypted URLs for downloaded project files. Thus, you can exchange not with files, but by references to them.
It is also possible to implement an interactive 3D project to your web page by copying into its text a small snippet code.

* Using free services is governed by the conditions for their "Terms of Use" sections.

Autodesk DWF Writer.

Autodesk DW Writer is a free program from Autodesk to secure 2D exchange and 3D data in DWF format. Allows you to exchange project data with a large territorial distribution of the collective, ensures the effectiveness of collaboration. Among the main features of the program: automatic publication of 2D and 3D files using DWF output tools, the ability to choose Autodesk DWF Writer module for SolidWorks 2006, Catia V5 or Pro / Engineer Wildfire 2.0 to publish all project information from 3D models, the ability to publish From Microsoft applications.

Autodesk DWF Viewer.

Autodesk® DWF ™ Viewer is a small free application that is used to exchanger design data in electronic form. Established specifically to work with DWF ™ format (Design Web Format ™), the program allows you to view and print complex two-dimensional and three-dimensional drawings, maps and models.

DWG TRUEVIEW - DWG / DXF Viewer from Autodesk

If one created the file, sooner or later the other wants to see this file or print.

It is clear that use only for printing or viewing a full-fledged application in which this file has done is not only uncomfortable, but also consistently. Full-featured applications are very full-scale money ...

So, free Viewer DWG and DXF files from Autodesk - DWG TrueView

All that he is able is to show type data files, display selected layers, print and publish their contents to the DWF format. With such a modest functionality, distribution DWG TrueView weighs as many as 110 MB! Actually, the viewer itself takes only ~ 300 Kb. All the rest of the volume will undertake a complete autocardine kernel for embedded solutions - Object DBX.

In other words, with all its shortcomings, DWG TrueView has one powerful dignity - it interprets the DWG and DXF files through the kernel of the AutoCAD, which makes it possible to exclude the discrepancies when editing and viewing the same file.

* Use of free versions of products is governed by the terms of the license agreement with the end users of the license agreement attached when they are loaded.

Free Sketchup Viewer is designed to view and print models created in Sketchup. Because Sketchup Viewer does not contain model editing tools, it is much easier to use for people who are not familiar with Sketchup. In addition, the models viewed in SketchUp Viewer are protected from unintentional change, ensuring that your customers will see exactly what you were going to show them.

A program for calculating and constructing an embodiment of bending moments, transverse and longitudinal forces, movements and reactions of supports in beams, flat and spatial frames. To solve, the finite element method (MCE) is used. The MKE processor is integrated into AutoCAD using VBA. The AUTOCAD environment itself is used as a pre- and post-processor. That is, drawing the model and the task of forces, moments, distributed loads, supporting elements, as well as the presentation of the results of the calculation takes place by AutoCAD. To facilitate the simplicity and supports in the framework model, a set of buttons (FlyMenu) has been developed. The Karkasa program works only in versions of AutoCAD 2006, 2007, 2008, 2009 32-bit. For AutoCAD 2009 64-bit version, the program is not yet adapted.

program: Dew_Lujg. - Details of bent naked general engineering use

The program is designed to calculate data sufficient for marking or drawing the sweep and lines of the gibbing parts of the general engineering use, such as: a corner, several types of challers, several types of brackets, clamp, rectangular pipe, loop ..., only 12 parts. Reference information about surface area and sweep weight for the selected part is given. You can also create a file for building a 2-D model of a sweep in the auto channel 2-D.

DEW_NRJYCG Tee Kosogol Asymmetric Transition
The archive includes a program of the program, in the unzipped form of 360 kb. Download
DEW_NRJYCHG Tee Kosogol Asymmetrical Equipment
The archive includes a program of a program, in a unzipped form volume 280 KB. Download

Programs are designed to calculate data sufficient for marking or drawing a tee sweep.

With the help of programs, you can create:

file for constructing in AutoCAD 2-D model sweep of tee;
file with calculation results.

For the work of programs on the user's computer, Microsoft.Net Framework 2.0 or later is installed.

Programs are free. Sale or receiving material remuneration for the distribution of programs is prohibited. The results of the programs are allowed for commercial use.

The programs are designed to calculate data sufficient to mark up or draw the scan. You can also create a file to build a 2-D model of sweep in AutoCAD.

The performance of the programs was checked on a computer with Windows XP installed and AutoCAD 2005.

The composition of each archive includes:
- EXE-file program;
- TXT file to configure the program;
- Program Description File.
In the unzipped form, the total volume of each archive is 0.5-0.6 MB.

Rectangular umbrella from one part (You can also create a file for constructing a 2-D model of the three types of umbrella sweep:
- without spaces: It is assumed to manufacture an umbrella with welding;
- with the allowance for Falts: It is assumed to manufacture an umbrella with a fold;
- With battles on Falts and to rush the wire: It is assumed to manufacture an umbrella with the help of a fold and rolling the wire around the perimeter of an umbrella to tighten its edges.)
Transition oblique from a rectangular cross section to rectangular

program: Calculator DEW_HVLBDN26020GH3.

The program is drawn up for calculating the minimum length and height of the text (Font PR36.020) applied by a flat printing method. For the letters of the Greek alphabet, Roman numbers, mathematical signs, degrees (fractions, indexes), the input of which is difficult or not possible using a computer keyboard, a program keyboard has been developed.

When you enter the program keyboard, a message appears which the replacement characters were introduced. If you need to recalculate the length of the text already entered by the user, for another font height, the corresponding buttons are provided in the program.

rectangular removal

The program is designed to calculate data sufficient for marking or drawing a rectangular removal sweep. You can create a file for constructing a 2-D removal model in the autocade. You can also create a file with the results of the calculation of the removal. The archive includes an EX-file program, in a unzipped form, a volume of 228 Kb. To work the program on a user's computer, Microsoft.Net Framework 2.0 or later is installed.

Name: Geohelp.

Short description: The program is designed to calculate the geometric parameters of flat sections and tel.
Parameters can be calculated by several different source data (a more detailed description in the info_geohelp.txt file)
Also built-in a string calculator (the result is displayed when entering the character string)
System Requirements: Requires Framework 2.0!

ACEDITOR - External editor of multi-line text for AutoCAD "A (as well as all products based on the IntelliCAD kernel: Bricscad, ZWCAD, etc.)

The Akir program (kinematics and performance analysis) is intended for the synthesis of the kinematic scheme of flat lever mechanisms such as simple and complex mechanical systems. Main features - performance analysis (mobility is unit), analysis of connecting rod curves of flat lever mechanisms, kinematic analysis (relocation, speed, acceleration of arbitrary link), optimization of the scheme of the mechanism for kinematic parameters.
The prototype served as TMM program (by S. Ruyev).

Program OTKLONENIIARAZMEROV. Designed to display allowable deviations of parts of parts in the hole system.

Fields of tolerances are not all that is in GOST (E). But everything is not needed, as experience shows in the Design Institute of Heavy Engineering. The program is very simple and in explanations does not need. Enter the size, click the button of the appropriate tolerance field and in the appropriate text box read the value of the allowable deviation. Deviations correspond to GOST. The program was created in Visual Basic 6.

Drawing template "GOST Drawing" to install the default ISOSPEUR font when creating a document for Autodesk Inventor 10

Notification Generator - The release of single and sets ("fractional") notices of change (AI) according to GOST 2.503-90.

Tacad - Frames A4, A3 ESKD with basic inscriptions for Autodesk AutoCAD 2002 and above with a program for inserting and filling, both in the sheet space and in the model space.

Recognition Registrar - Automation of the assignment of the sequence registration number with the designations of products and their design documents according to GOST 2.201-80, as well as software complexes and components according to GOST 19.103-77 and provides:
- automated assignment of the sequence registration number;
- view register of registered designations;
- ability to view the ECD classifier;
- collective use.

The program description provides recommendations for the safety of the register of designations. To operate the program, the Microsoft Windows XP SP1 / SP2 or Other (with Microsoft .NET Framework) must be installed on the computer. (138kb, packed in a zip archive)

List Generator - Rapid receipt of single and group (GOST 2.113-75) List and specifications from SCH and PCB files P-CAD 2001-2004
TAIP - Frames A4, A3 E ESKD with the main inscriptions for Autodesk Inventor 9 with the program for their insertion and fill. In version 1.20, work with technical requirements has been added. (370kb, packaged in the zip archive)

pCAD2AI - Creating a PCB file from the PCB file model in Autodesk Inventor 9/10.
The program provides:
- creating a voluminous printed circuit board model of any configuration;
- autosrhem not matching in the PCB file ends of the circuit circuit board;
- growing any number of components on both sides of the board in the form of parallelepiped;
- the ability to select holes and components to display in the board model;
- work with any number of PCB open files.

A set of 7 small programs that do not require installation.
Allow export results to AutoCAD.
All programs contain instructions for working with them.
1. DEW_LUJG Details Bottled Common Engineering Application
The program is designed to calculate data sufficient for marking or drawing the sweep and lines of the gibbing parts of the general engineering use, such as: a corner, several types of challers, several types of brackets, clamp, rectangular pipe, loop ..., only 12 parts. Reference information about the full surface and weight of the sweep for the selected part is given.
You can also create a file for building a 2-D model of a sweep in the auto channel 2-D.
2. DEW_JW2P Cylindrical Top 2
The program is designed to calculate data sufficient to mark up or draw the discharge scan of the cylindrical 2-liter.
- Create a file for building a 2-D removal model in autocade:
3. DEW_JW3P Cylindrical Top 3l
The program is designed to calculate data sufficient to mark up or draw the discharge of the cylindrical 3-liter discharge.

- Text file of the results of the calculation of the removal.
4. DEW_JW4P Cylindrical Outline 4ls
The program is designed to calculate data sufficient to mark up or draw the discharge scan of the cylindrical 4-link.
You can also use the program:
- Create a file for constructing a 2-D removal model in autocade
- Create a text file with calculation results.
5. DEW_JW5P Top Cylindrical 5-rally
The program is designed to calculate data sufficient to mark up or draw the discharge of the cylindrical 5-link.
Also using the program you can
- Create a file for constructing a 2-D removal model in autocade;
- Text file with calculation results.
6. Dew_JGH Rectangular Removal
The program is designed to calculate data sufficient for marking or drawing a rectangular removal sweep.
You can create a file for constructing a 2-D removal model in the autocade. You can also create a file with the results of the calculation of the removal.
7. DEW_GGZCRHCYGH The transition direct from a round cross section on a rectangular
The program is designed to calculate data sufficient for marking or drawing a transition scanner direct from a circular cross section to rectangular. The diameter of the circular cross section is no less diagonal of the rectangular section.
You can create:
- File for constructing in autocade 2-D models of the transition sweep;
- File with calculation results.

Cone Layout is a specialized program for building a truncated cone. It will be useful to welders, engineers, auto mechanics and everyone who works with metal cutting. For convenience, the program displays a rotating three-dimensional model with dimensions.

Flat projection can be printed on a printer or plotter, for use as a template for clipping form from metal plates. Or it is possible to export it to DXF AutoCAD format for use on numeric control machines (CNC). Also, the Cone Layout can save in Encapsulated PostScript (EPS) format or save the coordinates in the usual text format.

Thanks to the cost minimization function, the program optimizes the amount of material used, the seams that cutting will occur, as well as to build a sweep, the smallest piece of material will be used on which the projection can be placed.

Initially, the program was designed to design an exhaust pipe of a racing motorcycle. It is now used for completely different purposes: creating biomechanical manipulators, paper aviation models, historical reconstructors to create copies of medieval helmets, cones for exhibition of jewelry, metal rockets, exhaust pipes for choppers and much more.

Key features and functions

optimization of the use of material;
support for a large number of units of measurement: meters, inches, feet, yards, radians, degrees, hails, minutes, points;
export to AutoCAD DXF, Encapsulated PostScript EPS and TXT;
the ability to print large layouts on multiple pages;
detailed help system.