How to find out the password from the router to connect to Wi-Fi. How do I find my Wi-Fi password? How to change login in Wi-Fi Beeline

The Beeline company provides its users with advantageous tariff plans for the Internet. Each user can choose exactly the tariff that suits him best. Also, within the framework of some tariffs, the possibility of renting a Wi-Fi router is included, which will increase the monthly fee, but will allow you to use the Internet not only on one computer, but on several devices - these can be smartphones, tablets, laptops, etc.

Enter your address
Choose a tariff

Great choice!

Send error!

Installing the router

This device is quite simple to install, but if you ordered it as part of a tariff plan, then the installers who will configure your Internet will install everything themselves. They will choose the right place for installation so that the signal covers as large an area of the apartment as possible for the most convenient use of the Internet.

For example, for the popular “Fantastic” tariff plan, the kit will include a “SmartBox TURBO” router. It has 4 built-in omnidirectional antennas, dual-band data transfer, and support for speeds up to 1Gb / s.

Wi-Fi password when installing the Internet from "Beeline"

You can find out the password for your Wi-Fi router from the installers. By default, Beeline routers do not have a password. That is, if you connect the Internet wire to the WAN connector and do not take care of setting a password, then any user who finds your network name in a general search will be able to connect to you and use the Internet at your expense.

Enter your address
Choose a tariff
Apply for connection

Great choice!

Your application has been sent, expect a call from the operator in the near future.

Send error!

Try again later, or contact a consultant.

This often happens when a subscriber ordered the Home Internet service and refused to install a router and uses his own, which he himself purchased. Having connected the wire to the router, he eventually notices that its connection speed differs from the declared one. Instead of the promised 100 Mb / s, 50 Mb / s comes out, and sometimes less. Then the user begins to think that "Beeline" artificially lowers his speed and the conditions of the tariff are not met.

In fact, several neighbors have connected to his network and are clogging the line, downloading movies, playing online games and watching streaming video. To avoid this, set a password on your router or issue a tariff from "Beeline" with renting a router, the installers will set you a password, and you will know for sure that no one except you uses the Internet.

Setting a password for a router from "Beeline"

Often users do not know how to set or change a password on a Beeline Wi-Fi router, which is why installers do it for them. They enter the device web interface and ask the subscriber to come up with a network name and password. Some people are afraid to tell the password to a stranger, but an employee of the company does not need your password, since he will not be able to use it in any way. After the name of the network has been invented and the password has been set, the Internet can be used using any device that receives a Wi-Fi signal.

Change Password

To change the password on the Beeline router yourself, using the SmartBox model as an example, you need to perform the following steps:

In the address bar of the browser, enter the following numbers - 192.168.1.1 and press the "Enter" button.
In the page that opens, enter your username and password, by default the word "admin" is used as the username and password, click "Continue".
Go to the "Advanced settings" tab, then to the "Wi-Fi" tab.
In the menu on the left, open the Security tab.
In the Password (PSK) field, enter your new password.
Click the "Save" button, then "Apply"

It is worth following the standard advice for creating a password. It must be at least eight characters long, use numbers and English letters in large and small font. You do not need to use your year of birth, first name, last name or even the nickname of your pet as a password. Also, do not use passwords, for example, "12345" or "qwerty" - most often it is from these passwords that they will begin to brute-force data to your router.

Other routers

Changing the password on other models of routers from "Beeline" is performed in a similar way. Basically, only the web interface is different, in which these settings are applied. It is worth remembering that when setting up a password, you need to pay attention to some more parameters - "Authentication" and "Encryption method". The Authentication field should be WPA / WPA2-PSK, and the Encryption method should be TKIP + AES. It is these settings that are considered the most reliable for protecting your router from hacking.

Technical support from "Beeline"

If, despite this instruction, you still have questions about setting up and changing the password of the Beeline router, then call technical support.

They will explain to you in detail what to click and select in real time.

Broken router

Also, contact technical support if you think that your router has been hacked, and the Internet speed has become lower than the declared one, or the Internet has completely disappeared. They will help you change the password or send a specialist to check not only the router settings, but also the integrity of the cable, the location of the device and its performance.

Since all equipment is powered by the mains, sometimes the internal components of the device can be damaged during power surges.

A specialist will test the router and, if he realizes that it has internal damage and does not perform its functions, they will give you a new router, configure it again, and you will be able to fully use the Internet.

Firmware for Wi-Fi router from "Beeline"

As part of the tariff, you will be given a router with up-to-date and verified firmware. But some users are looking for more modern firmware, the so-called "homemade" on special Internet resources. We do not recommend installing them, as this can damage the operation of the device, degrade the signal, and most importantly, such a device will no longer be covered by the warranty.

All the firmware that your router supports are located on the official website in a special section, but if the router works without problems, then it is not recommended to update yourself without consulting a specialist.

In this article, you learned how to set or change a password on a Beeline router, where to contact in case of problems, and what actions should be avoided for the smooth operation of the device.

Let's make the setup Wi-Fi router to work in the provider's network for example Netgear WNR-612 v2... The settings are identical for most router models, so you can configure your device based on this article. Below you will find a video on setting up this router model. And in the second part of the article, a quick setup guide D-Link DIR300.

First you need to connect the Beeline Internet cable to the WAN (INTERNET) port, and the patch cord connecting Netgear router with a computer network card to any of the LAN ports. Power supply to the outlet :) Next, launch the browser (Internet explorer, google chrome, opera, mozilla) and enter the address of our Netgear Wi-Fi router in the address bar. Next, you will need to enter a username and password to enter its settings.

The address of the router can be found on the back of the device: routerlogin.net

Username: admin
Password: password

Basic Beeline settings for any router model:

Connection type: PPTP, better L2TP if available.
VPN address (access point, server address):
tp.internet.beeline.ru- for connection via L2TP protocol.
vpn.internet.beeline.ru- for connection via PPTP protocol.

09/19/12 - I decided to edit the article in order to write what will be in this video, for the sake of which it is worth watching:

1. Basic settings for connecting a Wi-Fi router to the Internet: - choosing an access point for connecting Beeline, - filling in the basic parameters for connecting, 2. Setting up a home Wi-Fi network in a Netgear WNR612 router: - coming up with a name and a key for the wireless network, - selection of the Wi-Fi connection mode 3. Protect the Netgear router from hacking, change the login password. 4. Setting up IP-TV in Neatgear Wi-Fi router without using a router

Part two. Setting up a D-Link DIR 300 router for Beeline.

The router is connected in exactly the same way as when setting up Netgear, the switching process is described in the first part of this article.

Now you need to go to the router's firmware. To do this, you need to enter the following data:

router address - 192.168.1.1
login to access the interface - admin
password - admin

If you got to the quick setup page from Beeline, then you need to perform just a few sequential steps to configure the router.

1. "Home Internet"- in this section, you need to configure the connection to the network, all the data necessary for the connection are already in the firmware of the router, all that remains is to enter the login and password for accessing the Internet in the appropriate columns.
2. "Wi-Fi"- here you need to configure the wireless network of the router. In the Network name line, enter a name, for example wifi_free, and in the Password field, enter a password (think of a password of 8 characters, for example, a phone number without an eight).

3. "TV"- if you are a subscriber of the “Digital TV” service, you need to select the port of the router to which you connected the set-top box. If you watch TV channels on your computer, select “Yes” in the “TV on PC” menu.
4. "Access to the router"- here you need to change the password to access the router.
Then click the "Save" button to apply the router settings.

After clicking the Save button, the router reboots, the process takes 1-2 minutes.

The main ways to recover a password for a router are hardware and software. In the first case, the parameters are checked on the home page of the device, while the software method needs a registry, special applications with which it is possible to scan information on a computer. The following describes how to proceed if you forgot your router password. We will provide all possible methods, as well as instructions for restoring access to the router. Here are the proven ways to find out the password for wifi, which we suggest you familiarize yourself with below.

Recovering the password from the router

Before you know what to do if the user has forgotten the password from the router, you will need to follow a few simple sequential steps to recover data.

Data recovery using a computer

1. In the right corner of the screen, there is a Wi-Fi icon at the bottom. Click on it with the right mouse button;

3. Then another window will appear on the screen, on which you need to right-click. Select "Properties";

4. Now you need a "Network Security Key" located inside the "Security" tab, where you will be presented with a hidden password. Check the box "Display entered characters", the password will become available.

There is another way to solve the problem if you forgot the password from the Wi-Fi router. To implement it, you need a router.

We use a router

1. Connect the equipment to your computer using the power cord (supplied);

2. Enter a set of numbers 192.168.1.1 in the address bar of the browser, and then enter the data in the login and password fields. This will give you access to the hardware settings. By default, most equipment models have a password and login admin;

Password reset

Resetting the settings to the factory defaults solves the problem with a password in most cases, but it is considered the most radical. Below we will tell you how to reset the password from a Wi-Fi router correctly. If the factory settings are not suitable, it is recommended to reset the settings. It is worth noting that this is easy to do:

1. All routers have a small button next to the power button. Press the button for 10 seconds;

3. Enter the equipment settings, where enter your personal data again in order to use the device again.

Regardless of which routers (Asus, Tp-Link, etc.) you use, the principle of resetting the settings is the same for different models. Changing your Wi-Fi password is easy: just follow a clear sequence of steps.

Password recovery using the program

There are various powerful programs to help you recover the password on your router. A software method for resetting a password on a router or recovering forgotten data helps to solve the problem using the following programs:

Above are not all programs used to see the password on the router. Such products are developed by amateurs and often contain links to resources with viral software.

Important! Since the use of amateur programs poses a threat to the security of the computer, it is advisable to use an anti-virus program throughout the entire process of recovering identification data!

The RouterPassView program is very popular in solving such problems, the principle of which is as follows: all passwords and logins are saved in the saved equipment configuration file. But getting to this data is not easy because it is encrypted. It is this file that serves the interests of the user. To use the program, take a few steps:

1. Start the program;

2. Click the "Open file" icon;

3. Specify the path to the file or drag and drop the file into the program window using the mouse.

The program is published in English, and therefore you will need a crack.

Error 651 miniport wan

Password recovery on a router may be accompanied by an error message. It should be said right away that this failure is insignificant and the way to eliminate it is most often not difficult. Such a message signals a problem with the modem or router. The reason may be incorrect interaction between the computer and auxiliary equipment. Lack of physical connections via miniport wan, on Windows OS, technical work from the service provider, incorrect network connection settings - all this can cause an error message to appear. However, in the vast majority of cases, the root of the problem lies in the wrong actions of the user. The way to fix the error is as follows:

1. First of all, you should restart your computer;

2. The next step is to disconnect the router from the network for 10 minutes. Turn on again after the specified time;

3. Now you will need to check the network cable for integrity. Also check if it is properly connected to the network card;

4. If you have several network cards, try connecting to each of them one by one;

5. Internet connection is very important, so check the connection signal when using a device other than your computer;

6. Then you need a "Control Panel". Go to the section and remove the drivers for the network card, then install the latest software version.

Often the instructions given above will help you solve the problem of eliminating the error. In rare cases, users have to go to service specialists.

Standard passwords for routers

The standard router password can be useful in solving the problem under consideration. Most often, in the standard settings of the equipment, the default login is admin, as well as the corresponding password. However, it should be understood that not all manufacturers adhere to the standard names, and therefore there may be some differences. D-Link DI-804 is a router model that has an unexpected feature - the password field should remain empty for a similar login, while the Zyxel Prestige 650 model provides a password and login in the form of a set of 1234 numbers.

Features of individual routers

In the event that the user has lost the access keys to the administrator page, as well as the equipment itself and the local network, the Internet, the restoration of each of them will provide for a special sequence. For hardware recovery on a tp link router, you will need some data - a password and login to the administrative page, where the parameters and settings of the local network and Internet connection are located. In the address bar, enter the IP address of the equipment manufacturer (indicated on a sticker at the bottom of the router). If there is no such sticker, use the following information:

Zyxel - 192.168.1.1;
TPlink - 192.168.1.1;
D-link - 192.168.0.1;
Netgear - 192.168.1.1;
Asus - 192.168.1.1.

For an asus router, the account will be different from the one required for a D-link router. After logging in with the appropriate equipment credentials, the user will be presented with an interface with various network settings and parameters. Enter the "Local network" tab to find out the data. Find the parameter "wpa key", opposite which is the user password for accessing the Internet. Regardless of whether the asus equipment has an account or the incoming data of the beeline router is required - the recovery sequence is approximately the same.

Complain about content

Password protection of the router is a necessary necessity. As important as keeping money and jewelry away from prying eyes. Not wanting to part with half the traffic or be robbed for valuable information, immediately change the secret code of the network, right during the installation process. How to change the password on Beeline Wi-Fi routers of various models, read our review.

Subtleties

I-2 = ""> Instructions

However, for specific models, this procedure may deviate from the scheme in some details. We will also consider how to change the password for the Wi-Fi network on Beeline Smart Box, ZTE MF90 and Zyxel Keenetic Ultra routers.

It doesn't matter what happened: if you forgot the required value or planted an agreement with Beeline, you can basically restore the code. How to find out the password for a Wi-Fi network:

Left-click on the icon for wireless connections ("ladder") in the tray.
In response, we receive a window of current connections.
Open the context menu of your connection with the right mouse button and select the "Properties" item in it;
After clicking on this item, the connection properties window will open to our eyes.
It remains to check the box "Display entered characters" and read the contents of the "Security code" field.

Img = "" __smart_box = ""> Change the password for Smart Box

See here for instructions on how to set up this model:

Smart Box is the most modern and nimble of all Beeline machines. Smart Box from Beeline is a new generation of routers. Here we proceed in the following way:

We launch a browser on the computer.
We drive the aforementioned router address into the address bar.
In the authorization window, enter the password for the device.
Then go to the Wi-Fi section.
We edit the text in the "Password (PSK)" field of the "Security" subsection.
Click on the "Save" button and restart the router.

The location of this option may differ on the Turbo model. It is located in the "Easy setup" window, where we will get after pressing the "Quick setup" button by entering the password for the router.

Zte_mf90 = ""> Change the data on the ZTE MF90

The procedure is the same, but the settings window looks different.

Zyxel_keenetic_ultra = ""> On Zyxel Keenetic Ultra

To change the password from the home Wi-Fi network, we log in to the "admin panel" in a known way. In the settings menu, select the "Wi-Fi network" tab. In the line "Network protection" you need to select the type of encryption WPA2-PSK. Enter the password in the "Network Key" field.

Img = "" style = "float: left; margin: 0 10px 5px 0;">
Users of wireless networks can face the problem of dropping Internet speed or high traffic consumption. In most cases, this means that a third-party subscriber has connected to the Wi-Fi - either picked up the password or hacked the protection. The easiest way to get rid of an uninvited guest is to change your password to a strong one. Today we will tell you how this is done for branded routers and modems from the Beeline provider.

Ways to change the password on Beeline routers

The operation of changing the passphrase for accessing the wireless network is no different from similar manipulations on other network routers - you need to open the web configurator and go to the Wi-Fi options.

The web-based utilities for configuring the router are usually opened at 192.168.1.1 or 192.168.0.1 ... The exact address and default authorization data can be found on a sticker located on the bottom of the router case.

Please note that in routers that have already been configured earlier, a combination of login and password may be set that differs from the one recorded by default. If you don't know them, then your only option is to factory reset your router. But keep in mind - after the reset, the router will have to be configured again.

Two models of routers are sold under the Beeline brand - Smart Box and Zyxel Keenetic Ultra. Consider the procedure for changing the password on Wi-Fi for both.

Smart Box

On Smart Box routers, changing the code word for connecting to Wi-Fi is as follows:

"Proceed"

Go to the tab "Wi-Fi", then in the menu on the left, click on the item "Security".

The first parameters to check are - "Authentication" and "Encryption method"... They should be set as "WPA / WPA2-PSK" and "TKIP-AES" accordingly: this combination is the most reliable at the moment.

The actual password should be entered in the field of the same name. We remind you the main criteria: at least eight-digit (more is better); Latin alphabet, numbers and punctuation marks, preferably without repetitions; do not use simple combinations like birthday, first name and surname and similar trivial things. If you can't come up with a suitable password, you can use our generator.

The next time you connect to the wireless network, you will need to enter a new password.

Zyxel Keenetic Ultra

The Zyxel Keenetic Ultra Internet Center already has its own operating system, so the procedure is different from Smart Box.

At the bottom of the utility page there is a toolbar - find the button on it "Wi-Fi network" and click it.

A panel with wireless network settings will open. The options we need are called "Network protection" and "Network Key"... In the first one, which is a drop-down menu, the option should be checked "WPA2-PSK", and in the field "Network Key" enter a new code word to connect to Wi-Fi, then press Apply.

As you can see, changing the password on the router does not cause any problems. Now let's move on to mobile solutions.

Changing the Wi-Fi password on Beeline mobile modems

Portable network devices under the Beeline brand exist in two variations - ZTE MF90 and Huawei E355. Mobile routers, like stationary devices of this type, are also configured via the web interface. To access it, the modem must be connected to the computer using a USB cable and the drivers must be installed, if this did not happen automatically. We proceed directly to changing the Wi-Fi password on the specified gadgets.

Huawei E355

This option has been around for a long time, but is still popular among users. Changing the code word to wi-fi for this device occurs according to the following algorithm:

"Entrance"

After loading the configurator, go to the tab "Setting"... Then expand the section "Wi-Fi" and select the item "Security Setting".

Check that the lists "Encryption" and "Encryption mode" parameters have been set "WPA / WPA2-PSK" and "AES + TKIP" respectively. In field WPA Key enter a new password - the criteria are the same as for desktop routers (step 5 of the instructions for Smart Box above in the article). At the end press Apply to save the changes made.

Then expand the section "System" and select "Reload"... Confirm the action and wait for the restart to complete.

Don't forget to update your passwords for this Wi-Fi on all your devices.

ZTE MF90

ZTE's 4G mobile modem is a newer and more feature-rich alternative to the aforementioned Huawei E355. The device also supports changing the password for accessing Wi-Fi, which happens in this way:

Connect your device to your computer. After defining it, open a web browser and go to the modem configurator - the address is 192.168.1.1 or 192.168.0.1, the password is admin.

In the tile menu, click on "Settings".

Choose a section "Wi-Fi"... There are only two options that need to be changed. The first one is "Network encryption type", it must be set to position "WPA / WPA2-PSK"... The second is the field "Password", this is where you need to enter the new key to connect to the wireless network. Do this and press Apply and reboot the device.

After this manipulation, the password will be updated.

Conclusion

Our guide to changing the Wi-Fi password on Beeline routers and modems is coming to an end. Finally, we want to note that it is advisable to change the code words more often, with an interval of 2-3 months.

The Beeline company provides everyone with the opportunity to buy branded multifunctional devices that meet the modern requirements of the wifi network in its salon. Now each client has access to the model that best suits his needs. Regardless of the manufacturer, the router must have a password.

Why change the secret combination?

The password has the sole purpose of making the wifi zone you paid for secure. Unfortunately, today it is a very common phenomenon when strangers guess the access code and use the Internet without the owner's permission. This can negatively affect not only the quality of traffic, but also provoke the loss of valuable information from computers or gadgets. Therefore, experts advise changing the key to wifi on a monthly basis and making it as difficult as possible each time. For this, it is recommended to use a combination of numbers, symbols, capital and small Latin letters. It is also convenient to change the password to a more memorable one for you.

Changing your password is not that difficult, so even a novice user can do it. To successfully change everything, you need to take into account the specifics of each wifi router.

Change password on Smart Box

Recently, in authorized stores of the Beeline company, it became possible to buy a new branded Smart Box router. It is classified as a technically advanced device, due to the support of speeds over 250 Mbps. If you managed to buy this new product for yourself and want to secure your network and change your old password, follow these steps:

1. Check the network connection of your computer and router.
2. Launch the browser, and in the address, type "192.168.1.1". This will open a welcome page. On it, click "Continue"

3. Enter “admin” next to “Username” and “Password” in the authentication window. Then click on "Continue".

4. After authorization is complete, a window will open to access all the device settings.
5. Open "Advanced settings".
6. Go to the "Wi-Fi" section. Here you click on "Security".
7. In "Authentication" set the strongest value to "WPA2-PSK".
8. In the "SSID" line, enter a new name for your network.
9. In the line "PSK" enter the secret combination and click "Save".

In order for the introduced changes to take effect on the router, restart it and enter the Beeline network using these data.

Changing the password on Zyxel Keenetic Ultra

The Taiwanese firm Zyxel is one of the leading companies in the Internet equipment market. Its products are famous all over the world, so Beeline made sure that its customers use only the best products every day. Despite the brand name, everyone can change the network access code on this router. To do this, you need to follow a few simple steps:

1. Open your browser.
2. Enter "192.168.0.1" in the search field.
3. The device will ask for identification data. To do this, enter "admin" in the blank lines.
4. After successful input, a window of all device settings will pop up on the monitor.
5. At the bottom there will be the desired tab "Wifi network".
6. In the "Network Security" item, put only "WPA2-PSK". This is the most reliable type of protection.
7. Enter a new password in the Network Key.
8. Click "Apply".

To avoid problems connecting to the Beeline network, start a reboot on the router. Then enter the new passcode on all your gadgets and enjoy high speed internet.

Change password on ZTE MF90

The modern 4G router is ideal for traveling. Users note its good looks, ease of use, reliable connection and long battery life. To change the password on this router, you need to spend five minutes of time and perform a few simple steps:

1. Launch the browser.
2. In the address field, enter "192.168.1.1", click on "Enter".
3. In the authorization field, enter "Admin" opposite your username and password. If you have previously set a restriction on your network, then enter this data.
4. Go to "Wifi".
5. Fill in the "SSID Network Name".
6. In the "Network encryption type" field, put "WPA2-PSK".
7. Enter the new password in the appropriate line below.

Be sure to reboot the device for the successful further operation of all electronic devices with the new secret combination.

Change password Huawei E355 (3G Wi-Fi)

Officially, this high-quality 3G router is called Huawei E355. The Chinese firm Huawei has specialized in the production of advanced Internet devices for many years, which is why leading communications companies provide them to their customers. Of course, Beeline was no exception. To quickly change the passkey on this device, do the following:

1. Launch your browser.
2. In the search, type "192.168.3.1"
3. A home page appears on the monitor showing the signal and connection. Below you can see the number of connections.
4. At the top right is the "Log In" link, which you need to follow.

6. After completing the authorization, open the "Settings" tab.
7. Open the "WLAN" section, and in it the "WLAN Basic Settings" subsection.
8. In the “NAME (SSID)” line, enter the name of your network.
9. In "Authentication" put "WPA / WPA2-PSK".
10. In the line "WPA pre-shared key" you can change the old access code to the new one.
11. Click "Apply" to save the settings on the router.

After successful saving, restart the device to work safely on the wifi network from Beeline. Do not forget to change the access code on all gadgets.

To keep your password strong, remember the following guidelines:

Do not use full names, dates of birth of relatives and close people.
Pet nicknames are also easy to guess.
Don't use light numerical combinations.
Enter the key only in Latin letters.
Alternate between uppercase and lowercase letters, numbers, and symbols.
If you doubt that the invented password is not complex enough, check it with special programs that can be found on the Internet.

Let it be a chaotic meaningless set of letters mixed with numerical values. Initially, write it down on a piece of paper, place it in a prominent place, and only then start changing the data. Perform these simple steps at least a month and you do not have to worry about the quality of the network and the safety of personal data.

Modern technologies allow us to walk freely at home and at the same time continue to use the Internet resource. But to prevent outsiders from connecting to your paid Internet, you need to take measures. For example, change your password. Not every user knows how to change the password on the Beeline wifi router. So it's time to highlight this protection issue.

Prerequisites for making changes

The password is the only thing that stands between the free Wi-Fi zone and unauthorized persons who decided to profit from your traffic. They are trying to guess this cherished code. Experts advise to change the password on a monthly basis on the router. You need to use numbers and letters in combination, and the letters should be different in size.

Why you need to make changes to the router:

The more devices are connected to the home network, the slower the internet speed. Therefore, it is advisable to get rid of unnecessary users, especially if the owner did not give them permission to connect to his network;
Important information can be stolen from your device: bank accounts, passwords and email addresses. Experienced computer scientists can gain access without even being physically close to your home;
"Especially creative hackers" can launch a virus into your network. As a result, a complete breakdown of devices connected to this network may occur.

How is it? Fearfully? Then you shouldn't delay changing the code of the Beeline router. Before you put a password, you need to find out the current combination of protection.

How to find your current password

By default, routers have a factory password. It consists of 10-12 digits. They are indicated on a sticker on the back of the box. When the wizard comes to configure the modem, he can, at the request of the client, make a number of changes, including setting a new password. It must be recorded in the Internet service agreement. If the box on the modem or the contract was lost, how to find out the password then. You can also view the password on the Beeline router using a computer. Follow the instructions below and you will succeed:

In the panel with the clock (lower right corner), click on the "Wireless networks" icon;
A window for selecting a network will appear. You need to click on it with the right mouse button;
Select "Properties" from the list;
Go to the "Security" tab;
Check the box next to "Display entered characters";
As a result, the "Security Key" line will change. The dots are converted to a valid Wi-Fi code.