How to make maximum performance on a laptop. Check the speed of the computer. Limit programs started when loading

The performance of the computer depends not only on the iron, in it installed, but also from the settings of the system itself. The better you optimize Windows settings, the faster and better your PC will work with maximum return.

Methods for setting up Windows 7 for maximum performance

Improving performance can be achieved by disconnecting unnecessary programs and functions loading a hard disk, a video card, a computer processor and RAM, as well as a change in the type of work and the inclusion of some additional built-in Windows functions.

Cleansing hard disk

The first thing to do before proceeding with optimization is to make sure that your hard disk is not clogged completely. Note that the free space should be both on the main section of the disk, on which the system itself is installed and on all other additional sections (D, F, G ...).

There are three ways to cleanse the disk: manual, using third-party programs and built-in functions.

Manual option

Delete all unnecessary programs, games and files. Convenient removal of programs and applications can be performed by the following actions:

Do not forget to clear the basket and temporary files.

Using third-party applications

There are many programs that allow you to clean the disk in automatic mode. One of the best in this way - CCleaner:

Go to the "Cleaning" block.
We celebrate in the lateral part of the "Cleaning" section all items that you do not mind remove.
Click the "Analysis" button to start automatically scanning the system for unnecessary files.
After the end of the scan, click on the "Clear" button so that the program starts to delete all the useless elements found on their own.

Using built-in functions

Disk cleaning in automatic mode is also possible without third-party programs, it is enough to perform the following steps:

Open the conductor designed to work with folders.
Open the disk properties you want to clean.
Go to the General tab.
In this section, you can view the statistics of the disc clogging in the format of the diagram. Click on the "Disk Cleaning" button.
Check all unnecessary items to you, such as "temporary files", "sketches", etc. For each element, the system will give a description that will help you determine if these files are needed or not.
Click on the "OK" button to start automatic cleaning.
After the process is completed, return to the "Disk Cleaning" window and click on the "Clear System Files" button.
An additional window will open, in which you will be offered to clear the recovery points and shadow cloning files. You can remove them only at your own risk, because without them in the event of a system breakdowns you will not be able to roll out it until it worked fine. That is, the erase this data is only as a last resort.

Registry setting

The registry is one of the main parts of the system, as all parameters and values \u200b\u200bof system settings are in it and perform their functions. If you optimize its work, all Windows will start faster.

Cleaning from errors and unnecessary elements

Over time, a large number of errors, error reports, temporary and damaged tasks and other files that slow down in their quantity can be copied in the registry. To get rid of all this in automatic mode, we use the third party CCleaner program:

Download and install the program from the developer's official website - CCleaner.org.ua/download/.
Opening the application, go to the "Registry" block.
Tick \u200b\u200bthe checkbox all the proposed parameters.
Run the registry scan.
Click on the button "Fix" to give a program to correct all errors yourself.

Defragmentation

Over time, the registry is exposed to strong fragmentation - divided into a large number of cells, which are not arranged in order, and in the broken. This reduces the speed with which the registry is looking for the files you need. To reduce the level of fragmentation, it is necessary to make defragmentation:

Download and install the Defraggler program from the official site of the developer http://www.piriform.com/defraggler/download.
Running the program, deploy the "Settings" tab.
Turn on the "Defragmentation when loading" function with the "Always" parameter.
Restart the computer.
When you turn on, you will see command lines - this is the designation that defragmentation is performed. It will be executed every time the computer is turned on until you disable it.

Optimization through changing values

By changing the values \u200b\u200bin the registry, you can disable or enable some functions performed by the system to optimize it. But before that, you need to create a backup copy of the registry to be able to have the ability to roll back to the primary state if you change to the worse:

Expand the "Run" window using the Win + R keys combination on the keyboard.
Use the Regedit command to go to the registry application.
In the window that opens, in a block with a folder tree, a PCM cliking on the top section "Computer" and select the "Export" function.
Choose a place where to go backup registry. It is advisable to arrange it on a third-party carrier. If the computer stops started due to changes in the parameters in the registry, it will be easier to restore it from third-party media.
To use the created copy, it is enough to open it and confirm that you want to make changes.

Now, returning to the registry, you can perform the following changes:

If you have not enough RAM, some part can be released by unloading unused libraries. In the registry, open the section: HKEY_LOCAL_MACHINE \\ Software \\ Microsoft \\ Windows \\ CurrentVersion \\ Explorer and create a DWORD type parameter named AlWaysUnloaddll. The value of parameter 1.
If there are 2 GB and more RAM on a computer, then applications will faster to respond to the user's action if the kernel codes and driver will remain in RAM, and not reset to the paging file. Open the HKEY_LOCAL_MACHINE \\ SYSTEM \\ CurrentControlSet \\ Control \\ CurrentControlSet \\ Memory Management section and find the DisablePagingExecutive parameter and change its value to 1.
During operation in the paging file, confidential data may remain, so it is recommended to clean the paging file for security purposes. In the HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONLSET \\ CONTROL \\ CURRENTCONROLSET \\ CONTROL \\ CURRENTCONTROLSET \\ Memory Management section, change the AcclearPageFileatshutdown parameter to 1.
Disable application caching. Open the HKEY_CURRENT_USER \\ SOFTWARE \\ Microsoft \\ Windows \\ Software \\ Microsoft \\ Windows \\ CurrentVersion \\ Explorer \\ Advanced and create a DWORD type parameter with the nameDisableThumbailCache, the value of parameter 1.
Disable automatic update. Open in the registry section HKEY_LOCAL_MACHINE \\ Software \\ Microsoft \\ Windows \\ Currentversion \\ WindowsUPDATE \\ AUTO UPDATE Find AUPTIONS and change its value to 1.
Improving performance Open the HKEY_LOCAL_MACHINE \\ SYSTEM \\ CurrentControlSet \\ system \\ CurrentControlSet \\ CONTROL \\ FILESSTEM Find the parameterNTFSDisablelastAccessupdate and set the value 1. This will disable the recording of the last file to access the file. And change the value of the NTFSDISABLE8DOT3NameCreation parameter to 1. This will disable the creation of a special file table for MS-DOS names.
Windows applications work both in the active mode and in the background. If you want active applications to receive more resources, thereby worked faster, then in the section HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ PRIORITYCONLSET \\ Control \\ PriorityControl Find the Win32PrioritySeparation parameter. By default, the value is 2. The maximum value is 26, but if you have a powerful system, it is necessary to change this parameter career. It is recommended for such systems the maximum value of 6 days of powerful systems can be put and more important.
Configuring the Superfetch service supporting and improving system performance. All service parameters are located in the HKEY_LOCAL_MACHINE \\ SYSTEM \\ CURRENTCONTROLSET \\ CONTROL \\ SESSION MANAGER \\ Memory Management \\ PrefetchParameters. There are three parameters that set the mode of operation of this service.
EnableBootTrace - Disables the service trace. Turn on the trace is only necessary when the service works incorrectly.
EnablePrefetcher - turn on the Prefetcher mechanism (proactive sample)
EnablesUPERFETCH - Enables Superfetch. At the same time, EnablePrefetcher and EnableSuperfetch parameters have the following values: 0 - The function is on, 1 - the function is enabled during operation, but disabled when the system is loaded, 2 - the function is enabled only for loading the system, 3 - the function is enabled in all modes.

Reduced load on the video card

The main load on the video card has a visual display of what is happening on the screen. This load can be reduced in two ways: decreased resolution and change system parameters. The first option can badly affect the picture: there will be too many pixels, and this is very uncomfortable. Therefore, consider the second option:

Open the computer control panel.
Open the System and Security tab.
Go to the "System" block.
Navigate to the optional system settings.
In the window that opens, go to the "Advanced" tab.
In the "Speed" block click on the "Parameters" button.
Mark the option "Ensure maximum speed."
Most tick will be removed, but you can set some of them back. Choose yourself, what visual effects are you willing to sacrifice, and what - no.
Click on the "Apply" button and wait until the screen is transformed. The picture will worsen from a designer point of view, but the computer will work much faster.

Disconnecting too much

Disabling unnecessary programs and services will allow you to significantly reduce the load on almost all computer components and speed up both the speed of the system and its subsequent work:

Run the "Run" window by closing the Win + R keys simultaneously on the keyboard.
Use the msconfig command.
The window opens, called "System Configuration". First of all, let's get into the "Auto-loading" tab.
Here is a list of programs that starts in automatic mode while the PC is turned on. Remove the checkbox from all the programs that you do not need. This list, usually created by you, but often there are cases when the programs are fraudulent by themselves assign the status of auto-switch and load the system.
Go to the "Services" tab.
Disable all services running not by the system, and third-party programs. Exceptions Make for those services that you need, for example, for antivirus and programs for creating fast screenshots. Everything else is recommended to disable. In no case do not touch the system processes, if you do not know what they answer, otherwise it can lead to a system breakdown.
While in the "Service" tab, do the same actions: deactivate unnecessary serving processes.
Go to the computer control panel.
Deploy the "Administration" section.
We tear off the subsection "Services".
Here is a complete list of services performed and disconnected at the moment. Disconnect services that are not related to system to reduce the load on the PC.

List of system services that can be tried to disable. Note that for each of this list can be individual, perhaps some services you use, so you should not disable:

Windows Cardspace.
Windows Search.
Offline files
Network Access Agent
Adaptive brightness adjustment
Windows archiving
IP Support Service
Secondary login
Grouping network participants
Disk Defragmenter
Dispatcher Automatic Remote Access Connections
Print Manager (if no printers)
Remote Access Connection Manager (if not VPN)
Network Participant Certificate Manager
Magazines and Alerts Performance
Windows Defender (?)
Protected storage
Configuring Remote Desktop Server
Smart Card Removal Policy
Software Copy Software (Microsoft)
Listener of a home group
Windows Event Collector
Network Login
Tablet PC Input Service
Windows Loading Service (WIA) (if there is no scanner or fotic)
Windows Media Center Scheduler Service
Smart Map.
Shadow copying Toma
Node diagnostic system
Diagnostic service node
Host library performance counter
Security Center
Windows Update Center

Power Setup

Computer performance also depends on how much energy it receives. If it turns out that the PC consumes energy more than it comes to it, it will begin to reduce the level of load on itself due to performance. Therefore, it is worth setting the correct power mode:

Go to PC Control Panel.
Select the "Equipment and Sound" section.
Select the "Power" subsection.
Select the "High Performance" mode and try whether the computer will work better or not.
It is possible for your type of PC, it is still better to suit a balanced mode, but this can be found only by the method of experiments.
Here you can change the brightness of the screen, it may affect the amount of energy consumed. It is known that most of the resulting power supply goes to the screen backlight.

READYBOOST FUNCTION

This feature allows you to use external drives in the role of mini-hard drives. That is, a connected USB flash drive will be able to work with small files: their storage, processing and redistribution. Usually, readyboost transfers temporary files to drive so that they do not climb the hard disk. You can activate the function in the following actions:

Connect accumulate to the computer and open the conductor.
Click the PCM on the connected drive and expand its properties.
Go to the READYBOOST tab.
Turn on the function.
Throw the slider to the amount of MB that will be removed from the drive to use its function. This can be like all the device memory, and only its part.

System performance check

To appreciate how efficiently your system is working, you can use the testing of its performance. It is worth understanding that the assessment can show not quite objective data, but still it can give some useful information. Verification in Windows 7 is carried out constantly and automatically to find out its results, you must perform the following steps:

Open PC control panel.
Go to the "System and Security" section.
Go to the "System" subsection.
Go to the "Counters and Productivity Means" feature.
View detailed information about how well the system works. The indicator is constructed relative to the maximum possible system performance. That is how quickly the computer can work, and how fast it does it at the moment. Maximum score - 7.9, normal - up to 3.5, below 3.5 - it's time to improve productivity yourself or change components of the PC.

The second performance indicator is checked as follows:

Open the task manager.
Go to the "Speed" tab.
See how much the central processor and memory are loaded. If the indicators are close to 80-100%, then it is worth starting to unload the computer, otherwise it will begin to be braked, and new applications simply will not be able to open.

So, the setting and evaluation of Windows 7 performance has been made. If your actions to accelerate the system did not bring results, there are two outputs: reinstalling Windows, since an absolutely clean version will work much faster until it is clogging, or the improvement of computer components. Remember that performance depends not from one detail, but from the interaction and power of all components in general. And try to install as few programs and games as possible, so that your system remains clean as long as possible, then the need for optimization does not occur.

Step-by-step instructions for improving the performance and optimization of Windows 7

Optimization of Windows 7 to date is extremely relevant and available not only by professional engineers of specialized centers, but also to ordinary users.

Since Issue Microsoft Operating System Windows 8., the popularity of its predecessor, Windows7.does not get less.

The prevalence of versions of Windows as of March 2014 (according to http://www.netmarketshare.com/)

Windows 8 / 8.1 - 12.54%

Windows 7 - 50.55%

Windows7. showed itself as the most successful and friendly version of the OS version on the Windows platform, especially in comparison with its predecessor - WindowsVista..

Currently, the tasks set by software manufacturers and the expectations of users regarding the speed and performance of the system has greatly increased.

Also increased the number of programs, preinstalined by manufacturers On new laptops and personal computers, which often only take performance from the system. In addition, over time, a huge number of temporary and unnecessary files generated by programs and Internet browsers accumulates.

In connection with the foregoing, an increasing number of companies are engaged in how to develop specialized utilities To optimize the work of Windows 7 and the creation multitasking programscarrying out the cleaning and configuration of the system, optimizing its operation based on the needs of a particular user, along with a complex of other software (for example, complex antiviruses "all-in-one", CCleaner, Regoptimazer and others).

But we will not forget that all cleaning and optimization programs act superficially without affecting the subsoil system. Thanks to simple actions, any user is able to safely and efficiently. optimize Windows 7without resorting to deep analysis and practical study of its work.

To optimize Windows7, follow these steps:

1. Full Turning off UAC (Account Control)

First of all, it is worth drawing your attention to the fact that this tool is one of the most important In the security of the system and its shutdown, it will inevitably reduce the overall level of its protection against external threats. However, many users with great confidence belong to high-quality antivirus software.

In this article we offer you the ability to completely disable UAC and change the level of protection.

Before performing the proposed actions, you should log in to the account Administrator.

14. Disable the autorun function from replaceable media and CD drives.

Disable autorun not only accelerate work with external information carriers, but also protect You are from the penetration of a number of viruses on the computer.
Run a notebook (in the Start menu in the Lock search I enter the word "Notepad").
After starting the Notepad program, you copy the following text:

"Honorautorunsetting" \u003d DWORD: 00000001
"NODRIVETYPEAUTORUN" \u003d DWORD: 000000FF
3. Next, select the "File" menu item - "Save As".
4. Select the file type "All Files"
5. Indicate the file name and expansion for it "* .reg"
6. Close the Notepad program.

7. Run the newly created file and agree to make changes.
With still present autorun function, do the following steps:
1. Open the Notepad program
2. After starting the Notepad program, copy the following text there:
The code:
Windows Registry Editor Version 5.00

"Autorun" \u003d DWORD: 0000001

"Allocatecdroms" \u003d "0"

"NodriveTypeAutorun" \u003d DWORD: 00000091

"Nosavesettings" \u003d DWORD: 00000000
3. Next, select the File menu item - "Save As".
4. Select the file type "All Files"
5. Specify the file name and expansion for it "* .reg"
6. Then you will leave the Notepot program.
7. Run the newly created file and agree to make changes.
8. Restart the computer and check the availability of standards on media.
Attention This way will turn off your autorun from all media:
Flash and portable discs;
CD, DVD, BD discs;
Network discs;
Local disks.

15. Move the basket from the desktop on the taskbar

If you want fully Free up your desktop from icons, then you can do it. After all, B. Windows 7. You can not only remove basket from desktopBut even attach it to the taskbar.
1. Right-click on an empty place on the desktop.
2. In the context menu, select Create - label.
3. In the Object location field insert:
% Systemroot% \\ Explorer.exe Shell: RecycleBinfolder

4. Click Next.
5. In the window that opens, in the Name of the Label. We enter the basket and click Finish.
6. A shortcut appeared on the desktop (to make sure that this is a basket, open it with double click), but it looks like a guide label, and not Baskets. To fix it by clicking on it with the right mouse button and select the properties, then click the button Change icon.
7. In the Search icons in the following file, enter:
% Systemroot% \\ System32 \\ imageres.dll
And press the input.

8. From the proposed collection of Windows 7 icons, choose the basket icon and press OK twice.
9. Now our basket icon began to look authentic. Drag and drop it with the right or left mouse button somewhere on the taskbar.
10. Right-click on the desktop, choose personalization, then change the desktop icons and remove the checkbox from the basket.

16. What to do if the hard disk section disappeared after installing Windows 7

Suppose the hard disk of your computer contains two partitions (C and D) and after installation on the second section of the other OS, the first section disappeared. In fact, the section remained there, where it was, but Windows 7. did not assign him a letter. Consequently, we do not have access to the data stored on this disc.

To assign a disk letter, go to the control panel -\u003e Administration -\u003e Computer Management.

In the left menu, select Storage Devices -\u003e Disk Management. The information is displayed here about all disks connected to the computer, including logic disks (partitions), drives and removable discs. Our lost section is here - it is displayed in the list and has neither the letters nor the volume label, but the system is recognized as a hard disk.

1. Click on it right-click and in the menu that appears, select the change the letter of the disc or the path to the disk.
2. In the window that opens, click the Add button.
3. In the window that opens in the line, assign all free letters in the form of a disclosure list, any of them can be assigned to our "unidentified" section.
4. Select the letter and press the OK button.

As you can see, setting up and optimizing Windows 7, with a proper approach, it is not a difficult and fast way to improve the process of operation of the computer, and increase its performance and speed.

Important!

If, after the Windows optimization made, you have not achieved the desired result, or your actions led to the system's violation, Uservice specialists will help you.

Settings for modern operating systems (Windows 7, Windows 8, etc.), according to developers, must satisfy most of users, and independently of the model and modification of the laptop. However, the practice shows the opposite: due to the overload of the system and the presence of many unnecessary laptop programs do not cope with the processing of information, they fail to work, their performance falls. The most effective method is "overclocking", but there are other ways that will be discussed in this article.

Increased laptop performance is advisable for the following reasons:

will improve the performance of your laptop;
it will help your laptop to serve you longer than usual.

Several acceleration methods

Replacing the main component devices:

Replacing the hard disk and an increase in the amount of RAM.
Installation on the cooling system laptop.

A series of simple manipulations with your laptop:

Cleaning automatic downloads.
Disable background services.
Optimization and defragmentation of the hard disk.
Setting the power plans.
(separate article).

How to improve the performance of a laptop using simple manipulations

Method 1: Carrying out the autoload

The laptop almost always performs automatic downloads from the Internet. And if one autoloads are required by the device to update current software versions, then others are absolutely not needed. The impressive part of these downloads the user does not use at all when working on a laptop. Here are only their presence in the memory of the device, as well as automatic start and operation in parallel with the operating system, strongly affect the speed of the desktop computer.

To clean the startup, you need:

Open the main menu of the "Start" device.
Go to the "Run" tab.
In the opening line, enter the following key combination, swing the keyboard on the English layout: msconfig.
Next, click on the "input".
A new window will open, in which you need to select "Auto-loading", removing checkboxes from all programs that you do not use.
To save the executed actions, click the Apply button, and then restart the system.

Method 2: Turn off background services

Desktop design by default assumes the issuance of different visual effects. Of course, the visualization makes the work more pleasant, but it is this chip that intensively absorbs the processor resources, the video adapter's RAM. To improve the performance of the laptop, such "decorations" is better to turn off.

For this:

Go to the main menu of the "Start" device.
Click "Run".
In the opening line we prescribe the following combination: Services.msc.

After that, a list of all the background services involved with a brief description of each of them will appear. Come on the list and select those services that do not use. When you click on the name of the service, a small menu will pop up in which you need to select the "Disable" button.

Perform all actions must be carefully shutting down only those background services that you really do not need. Otherwise, "forced shutdown" can cause malfunctions in the device.

Disabled parameters If you wish can always be restored, picking up the most correct operating mode for your laptop. Disabling background services will significantly unload the processor by simultaneously reducing the amount of RAM consumption. As a result, the performance of the laptop will increase, it will work much faster.

Method 3: We carry out optimization and defragmentation of the hard disk

In the process of working on the hard disk of the device, many fragmented files accumulate. Each time when accessing these files, the system spends a lot of time, which is expressed in the form of "hanging" and "braking". In order to exclude such phenomena, it should be performed to deterrate the hard disk.

This operation can be performed using special programs (utilities). The most popular utilities that really help improve the operation of the system are Defraggler and CCleaner. After starting, they automatically optimize the system and deterrate the hard disk defragmentation, cleaning the system from temporary files and accumulated on the disk error.

Defragmenting the disc can also be manually using a built-in defragmant. To do this, go to the main menu of the "Start" device, then go to the "program" - "standard" - "service", find "disk defragment" and launch the application.

Method 4: Perform the setting of power plans

In modern operating systems (for example, Windows 7), it is possible to manage the power saving options, in particular, the user can independently adjust the power plans for their laptop. The default system can use one of the modes:

"Balanced" - the mode that turns on automatically as soon as the laptop connects to the network.
"Economical" - mode that is used when operating the device from the battery.

If you configure the plan "Economical" in more detail, you can even more increase the performance of the laptop. If you activate the "High Performance" mode, then all the resources of the device will be used to the maximum without any restrictions.

To authorize this plan and access the settings of the center responsible for the power consumption of the device, you need to click on the Battery icon. You will then seek a new window in which you need to select "Advanced Power Settings". As soon as the plan is activated, it will be displayed in the "Power Supplies" window. Usually in laptops, the "High performance" mode is hidden by default. You can display it by clicking on the "Show Additional Plans" arrow.

To configure the "Economical" plan, you must follow the link "Setting the Power Plan", which is located opposite the mode name. This will translate the system to the economy mode, i.e. the device will automatically consume the minimum amount of energy.

How to speed up the laptop by replacing its elements

You should not do these operations if you have never had dealing with a computer assembly, you can seriously harm your laptop. It is best to refer to the professional in this case!

Step 1: Replacing the hard disk and an increase in the amount of RAM

Replace the processor or video card on a laptop, especially at home, it is impossible. However, it is possible to increase the performance of the device by replacing the hard disk and RAM. Initially, you will need to replace the hard drive with a special drive of the SSD type. This will provide an opportunity to significantly reduce the opening time of the main software programs and speed up the process of loading the operating system, as well as as a whole increase the performance of "iron".

As for RAM, many manufacturers in order to reduce the price of the finished device will noticeably save on RAM, establishing the simplest and cheap modules in laptops. Therefore, the "native" machine modules are advisable to replace more modern and high-speed memory modules, for example, Sodimm type. But before replacing, it is necessary to check what the memory standard supports your laptop (DDR3, DDR2 or DDR), as well as what maximum allowable amount of memory can be installed on your machine.

It is better not to save on the purchase of basic system components, because it is extremely problematic to replace other elements of the system on a laptop on their own, and sometimes impossible. In general, not to face similar problems, you need to purchase laptops in advance with the processors that correspond to the tasks facing the laptop. In order not to make a mistake in this choice, we recommend the article "".

Step 2: Install the cooling system on the laptop

It is not worth ignoring the cooling system, because on how quickly the laptop is "heated", its performance, performance and duration of the operational period is directly dependent. Choosing a cooler (a device for cooling a laptop), it is desirable to give preference to known and proven manufacturers (for example Cooler Master, Zalman or Thermaltake). The cooling system will provide the device more quiet and reliable operation in the most extreme work conditions.

Also, it will also be installed in a fan laptop that will cool the front panel of the device, where the basket is usually located with hard drives. You can additionally install the fan in the back of the system unit.

Convenience and degree of comfort when working on modern computer technician depend on a variety of circumstances. Configure Windows for maximum performance, it is impossible not to deal with this issue. At least the following factors are relevant:

Power of devices included in the computer.
Installed operating system.
Produced operating system settings, such as Windows settings.
Software resource-intensity
The complexity and volume of everyday tasks are solved.
Network activity of the user or software.
Computer type: stationary or portable.

And many other nuances left by us without attention.

Next, we assume that we are dealing with Windows 7th version - the most common version of the Microsoft operating system. Therefore, some further recommendations for its configuration may be irrelevant for other versions, while others, on the contrary, are universal.

The operating system has a lot of component with varying degrees of speed. Consequently, they are considered separately. Our goal is to get the highest possible system without changing anything in the equipment. So, consider these components in order.

We work with a hard disk

Hard disk is one of the nodes most responsible for the speed of work. The fact is that no matter how organized data storage on the disk, it does not avoid fragmentation - situations where the logically related data is physically placed in different areas of the disk. In this case, the reading head of the disc commits many additional operations to detect the required information fragments. There is a way to avoid it - to produce the so-called disk partition defragmentation.

In Windows, make it very simple: Select the icon of any of the partitions in the "My Computer" window, click on it right-click and select the menu item "Properties". In the window that opens, go to the "Service" tab and click there on the "Perform defragmentation" button. Immediately on the General tab, there is another button that allows you to improve the performance of the computer - the "Cleaning" button. With it, you can delete all unused and swelling system files that slow down the user.

In addition to embedded in Windows tools, for increasing the performance of the hard disk, you can apply third-party programs. For example, the Norton Disk Doctor software package

Get rid of Lysnya

Very often, Windows is converted by users into a sort of landfill or a bench of the old woman. The system has a rabid number of necessary and not necessary programs affecting performance. Any setting of the OS is powerless if there is a mass of the rubble in the autorun. All this starts at the start of the computer, eats up the RAM, conflict with each other for the right of possessing by system resources and can sometimes hang Windows immediately after logging into the system.

During the work, do not open too many windows at once. If at the moment you do not use the Internet - close the browser. Only Firefox is able to "bite off" from the system half of the RAM. Start only what you really work with, close the remaining programs. This is another useful reception to customize performance, not configuring anything. The culture of the right job in Windows is a serious thing.

The next reception concerns disable no longer your programs, but unused systemic. Windows contains many completely useless things that are functioning only through consignment from the user. They also affect computer performance. To ensure maximum performance of Windows - you do not need to configure them - they need to just turn off. First of all, it concerns visual effects.

In the Start section of the Start menu, enter "Visual Effects".
In the search results list, click "Setting the System Presentation and Performance" link - the Settings window opens.
On the Visual Effects tab, select "Provide the Best Speed".

Windows is ready to work in a new mode.

It is unlikely that you can doubt that the best performance of Windows 7 has immediately after its installation. The system disk is a practically newborn, there is nothing superfluous in it, so the system "flies." Yes, Windows 7 manufacturers have tried to impress their future users, especially those who fulfill the replacement of their previous system on Windows 7. At first everything goes perfectly. Seed starts, shows a decent speed than the user pleases, but then she begins to upset it with his "Tugodum."

Unfortunately, the developers of Windows 7, probably working on supere-speed PCs, have little thought about the multiple settings that are responsible for the speed of the system, based on the fact that the main mass of users will be a housewife with their laptops and tablets. And not every more educated user, especially if he has problems with English, is available that information on setting the system parameters to increase its speed, which is posted on the Microsoft website. The article attempts to tell users how to optimize Windows 7 is possible, to introduce them with its admission to increase the speed of the operating system and the computer as a whole.

It is unlikely that the user will like if the operating system loads have to wait a few minutes. Although the download of the computer from Windows 7 occurs previous versions of the OS, many users do not mind to speed it up with some admission.

Using multi-core

To enable support for multi-core processors, you should enter the word msconfig in the search bar. Then you need to go along the Load Tab - "Advanced Parameters" - "Number of processors", mark it, set a value equal to the number of cores in the installed processor, and complete all by pressing "OK".

Then you need to restart the computer and make sure that the operating speed of the OS is incremented.

Turning off applications from autoload

OS boot speed also depends on the number of applications that are loaded simultaneously with Windows loading. The list can be seen on the same MSCONFIG command, but on the "Autoload" tab:

Often, this list includes (unnoticed for the user) applications whose downloads are not required at all, but they increase the download time. To optimize Windows, you should exclude such applications by removing the checkbox and pressing "OK". After that, you should reboot.

Acceleration of PC shutdown

You can also speed up the computer shutdown if you can reduce the value of the time interval valued to complete active programs. If at the same time they will not have time to end independently, then Windows will stop them forcibly. To reduce the power off time, you must edit the registry. Without going into the details of this process, it should be said that the registry needs to find the WAITTOKILSERVICETIMEOUT parameter and change its value from 12,000 to 2000.

Accelerate the launch of applications from the Start menu

If the classic view of this menu is not used, then optimize it, that is, to increase the speed of its operation as follows:

Press the PCM on the taskbar or the Start button.
From the context menu, select subparagraph "Properties".
In the properties, open the tab "Start" menu.
On the Click "Configure" tab.
Delete the checkbox from the "Allow recently installed programs" item.

Acceleration graphics

In the case when the PC does not have a fairly powerful graphics adapter (it has a depletion or integrated video adapter), the Aero interface can cause a significant reduction in the system speed. Optimize in this regard the graphic system can be disabled by some AERO functions, but without losing the basic advantages of this mode. What functions Aero can be disabled, and which leave, and how to do it? And this is done like this:

In the control panel (PU) we find the "System" section and click on the line "Advanced system parameters".
Open the "additionally" and click on the "Parameters".
Open the visual effects tab.
Remove daws from all the parameters, in addition to the shown in the following figure, and click "OK".

Increase the speed of copying files

A new feature appeared in the seven - the so-called "remote difference compression". It is used when copying and moving files and consists in calculating differences in the source files and receiver. This is done to reduce the volume of rewritten data, but requires additional time to calculate their differences. This feature can be disabled as follows:

Select the "Programs and Components" section in PU.
Click on the line "Enable and disable Windows components".
In the built list of the system components, we remove the checkbox from the "Remote Different Compression" element.

Enable ReadyBoost Function

The developers conceived by the developers optimization of Windows 7 was replenished with a new function - ReadyBoost. The assignment of this feature is to virtual expansion of the RAM of the computer, due to the connected external USB drives and Flash maps. The OS will be used as cache memory, thereby speeding up the read / write operations and increasing the speed of the entire system. Just required to include it, and for this you need:

Registry optimization

Computer registry files from Windows 7 is a kind of configuration database and settings of the OS itself and installed applications. This database, unfortunately, tends to alpine and fragmented over time. And since the appeal to it is performed very often, it can cause a significant drop in the speed of the computer. Therefore, the registry should be periodically cleaned and defraged.

Defragmentation tools built into Windows are not intended to work with the registry, so its optimization is usually performed using any third-party utility. As an example, the CCleaner program can be brought by many users. After it starts, you need to select the "Registry" item. In the window that opens, click the "Problem Search" button and wait for the results of the registry status analysis. If any problems are found, then you need to click the "Fix" button.

Defragmentation of hard drives

Strong fragmentation of hard disks is also able to cause a decrease in the speed of the computer. This is especially true of the system disk, as it is used in the operation of the system almost constantly. For its defragmentation, you can resort to the tool embedded in Windows - the Defrag utility. To start it, it follows:

Click "Start".
Click on "Computer".
In the window that opens, click on the PCM on the system disk and from the context menu to select "Properties".
In the Properties window, open the "Service" tab and click the "Perform Defragmentation" button. A window appears above:

As it can be seen from it, defragmentation can be performed in two modes - on schedule and manually. With manual defragmentation, first should determine its need to start the analysis of the disk. If after it is found that the disk is very fragmented, then it is necessary to launch its defragmentation by pressing the corresponding button.

Turning off uac

The UAC function (account control) is one of the most important means of ensuring system security. It is necessary to carefully weigh all "for" and "against" its disconnection. Nevertheless, many users are turned off, relyingly relying on high-quality anti-virus protection. Function or reduce protection level. In any case, administrator rights are required for this. Changing the level of protection is done in this way:

In the PU, open the "User Accounts" section.
In the resulting window, click on the string with changing the control parameters of accounts.
In the window shown in the following figure, we set the slider into one of the 4 levels of protection levels. In the lower position, the UAC is completely disabled.

Disable unused services

It is no secret that the system has services that are rarely used, or not used at all. It is clear that such services can be disconnected without harm to the operation of Windows 7. Moreover, their disconnection will give the release of RAM, a rarely access to the swap, that is, the acceleration of the computer. This tool requires marginal caution and accuracy, so before run it, you should progress by creating a recovery point. This will help to roll back to the previous state in case of possible problems as a result of their disconnection. You should not perform this operation in group mode, it is better to make step-by-step, every time convinced in the normal functioning of the operating system.

Completely safely exposed to such services as:

REMOTE REGISTRY (remote registry).
Support IP Service (IP Support Service).
SERVICE ENTRY TABLET PC (Tablet PC Input Service).

Turning off other services, you need to have complete confidence in which result it will lead.

To disable any service, go to the "Administration" section of the control panel and select the "Service" category appeared on the right side. As a result, a list of all system services will appear. You need to find the desired service in this list and click on it twice. A window opens with the parameters of this service, for example:

If the service is running, then you first need to stop using the corresponding button. Then in the "Type of Start" parameter, set "disabled" and click "Apply" and "OK".

Conclusion

Of course, there was not a complete list of optimization techniques and computer settings with Windows 7. In conclusion, we present the table of the best third-party programs to optimize Windows 7. They all have a different functionality, which is also specified in the table.

In contact with