The Sony Ericsson phone does not turn on. What to do? How to restore, enable Sony Ericsson Touch, what if the smartphone does not turn on does not turn on the Sony Ericsson phone! Error in self-testing phone

The normal operation of any smartphone depends primarily from hardware and firmware. The two of these elements should be perfectly synchronized with each other so that your gadget without performing all the function provided by the developers.

In this article, I will consider the basic problems with which the owners of Sony Xperia smartphones may face, and possible options for solving them. We emphasize in advance that in case of faults it is best to immediately contact the service center for help from specialists in this matter.

However, for those subscribers who prefer to troubleshoot independently, this article should be useful. So, if your smartphone Sony does not turn on, you will find several ways to correct this problem.

Despite the fact that some Sony Xperia devices are installed battery, Sony has provided several key combinations that allow you to simulate the process of extracting the battery, which I will tell.

Most often, the smartphone does not start due to the problems with the firmware, which are solved by the following methods. So, if you encountered similar problems, I advise you to do the following ...

The Sony Xperia smartphone messenger can be forced to restart or turn off, and I recommend trying both methods. For this you need:

1. Press and hold the power on the smartphone and the volume button for 10 seconds.
2. Your device must curb. Your further actions depend on whether you want to restart the phone or turn it off.
   • If you need to restart the gadget: release both buttons. The device must reboot.
   • If you want to turn off your smartphone: Continue to hold both buttons. After a few seconds, the phone sularms three times and turns off.

If the device does not respond to your actions, try the following:

1. Press and hold the volume button.
2. Then press and hold the enable smartphone button without releasing the volume button, and wait about 10 seconds.
3. Select a forced reboot of a smartphone or shutdown.

All you need is to simulate the extraction of the battery

This operation will force the phone to disconnect, and then start again. This is a great way to solve the problem if your Sony Xperia hung or blocked, it gives a white / blue / black screen and does not respond to your actions.

The way to simulate the extraction of the battery on Sony Xperia is very similar to the simulation of the battery at Motorola ATRIX HD - you need to click on the button volume Reduction and button inclusion Devices I. at the same time hold them for 15-20 seconds.

If after 20 seconds the phone does not turn on itself, release the buttons and try to start the device in the usual way - by simply pressing the power button.

For example, let's say that your Sony Xperia hangs or not turns on. Just clamp the volume buttons and turn on the phone, count to 20 and if the smartphone does not respond in any way, release both buttons, and then press the power button that will work as usual.

On some devices, instead of the volume button, click on the volume button. Therefore, if the method specified above did not help you, try simultaneously to hold the buttons volume to increaseand enable deviceson the 20 seconds.

If it did not work, try again. This procedure should be rebooted sooner or later.

Tip: If the phone does not restart after several attempts, then try disconnecting it from the power source.

However, if all the above methods do not help include the phone, I advise you to contact the Sony service center to get advice from specialists. Perhaps you are faced with a technical problem, which you will not be able to decide on your own.

I hope this article helped you. If you have other tips on solving this problem, share them in the comments.

The Sony Ericsson mobile phone is widely used by users, so there are usually no special problems when repairing the phone of this brand. The most common Sony Ericsson faults can be attributed to such as:

Sony Ericsson phone does not turn on

How often we are brought to hear that Sony Ericsson does not turn on. This is the most common reason, due to which users of mobile devices are addressed to us. The reason for this fault may be different. It is possible that it is due to the falling fluid under the body of the apparatus or the falling of the phone and the blow of a solid surface, and maybe it's all about the software failure of the device or in a factory marriage. In any case, the diagnostic examination of the device will be able to give more accurate information.

All breakdowns can be easily eliminated in our workshop: dried up the phone and clean from corrosion, replace the broken parts with new original components or repair the failed spare parts, update the phone firmware, etc.

If the display shows a white or black screen, then it is required to replace it. All of the fault can be released due to the mechanical effect of the loop. This is one of the typical faults of Sony Ericsson. The display may not work because of the malfunction of the mobile device. In order to figure out the cause of the breakdown and eliminate it efficiently, you need to seek help from specialists.

In addition, there are no discretion cases of image problems: bands and other artifacts may appear on the display. As in the previous case, the most likelihood is that the reason lies in the loop (especially in the "clamshells" and slides). Only qualitative diagnostics will give an accurate answer.

In this case, it is also the main thing - to correctly put a "diagnosis" of malfunction, to diagnose, and then the "treatment" will have the necessary result. The problem may be as in software failure, and in mechanical damage to the printed circuit board or its elements. Also, there may also be problems with power amplifier and battery. Therefore, without the help of professionals it will not work out.

To the emergence of the problem of this kind can be involved both the failure of the battery and the mechanical damage to the printed circuit board. As a result of the fall, these details may fail and bring various inconvenience to the user of the mobile device. Therefore, an urgent appeal to the workshop is required for the speedy recovery of the phone. Occasionally, self-terminal is associated with a collection of software.

As a result of improper operation (falls and blows about a solid surface, "fossil"), as well as a failure in the work of software, can fail the charger of the phone or charging connector. The service center masters will make diagnostics, "Complete" to the cause of the breakdown and returned the phone the opportunity to charge without problems.

If in the Sony Ericsson phone:

• buttons or keyboard do not work;
• no sound or speaker and microphone;
• no network or phone does not see a SIM card.

Specialists will help our workshop. Replace or repaired speaker, microphone, cable, keyboard, battery, and firmware update and other services will be updated to return the former working mobile device. Bring to the repair of Sony Ericsson to our specialists and use only working equipment.

If your phone malfunction is not described in this article - it does not matter. You can learn any information about the breakdown and ways to eliminate your model on the contact numbers of our service.

How satisfied with your device?

Your mark:

Average rating: 5.0

Sony Ericsson Phoams
Phone recovery Phone / Smartphone Sony Ericsson XZ Premium model on the operating system with a screen dpi from a brick. Modern mobile phone is such a difficult thing that, without the need it is better not to climb into its insides.

It happens that for not knowledge or by negligence, after unsuccessful flashing, the change of software does not turn on, is blocked. In this state, the phone / smartphone Sony Ericsson smartphone XZ Premium model on the operating system with the screen - DPI call "brick".

With brick it is clear what to do, and what to do with such a phone? How to reanimate it and run? There is no universal tool, for each model Sony Ericsson Z3 32GB, XA1 Plus, X Performance, Tablet Z Ultra and other models, there are methods of recoveryphone

Errors on the phone, how to enable the phone Sony Ericsson XZ 2, Z2 White, Xa2 Dual. Restoration from the state of the brick.

Information on how to restore Sony Ericsson XZ1 Black, NWZ, M4 Aqua, Sony Ericsson XZ2, E5, NWTexthene after flashing or from the blocking status, or when the phone does not turn on, you can read on specialized forums and sites.

Imaging or Error When firmware Firmware / Smartphone Sony Ericsson Mode Xa Ultra on the operating system with a DPI screen.

If you created with your phone Sony Ericsson NW, M5, SmartWatch 3 something unhealthy, and after that he stopped being loaded at all and does not allow either a recovery or in the FTM in the FastBoot, then do not despair. Another means remains:

Restoration of not included, killed Sony Ericsson phones at home.

- Restore Sony Ericsson phones, after unsuccessful firmware. In the description, the so-called Jag method is used on the site. The essence of the method is that it is necessary to make a special jag plug, by soldering contacts (4 and 5) with a resistor 301k. This jag is inserted into the phone of the Sony Ericsson Z3 32GB - DPI phone when the battery is removed. Read more How to make the restoration of the phone in this way is described here.

Restoring the Sony Ericsson phone to a healthy state.

- for phone owners. You can view a list of all supported devices, such as the Sony Ericsson XA1 Plus - DP phone and other Motorola FAQ on the recovery of the phone is located on the link above. The site also describes the recovery of the phone by closing the contacts when the battery is removed.

Before restoring the phone, you need to download and install a special program on PC: Random "S Developments Flash & Backup. Next: pull the battery, closer on the phone connector Contacts 4 and 5 (see photo), keeping the needles closed insert battery, skip the needles , Insert the cord into the connector and connect to the computer, in the Random program "S Developments Flash & Backup a message should appear that the phone phone Sony Ericsson X Performance - DPI is connected.

Restoring the Sony Ericsson phone from the "brick" state.

- This method of restoring Sony Ericsson C4 LTE phones, C2305, XZS of different models, different manufacturers. When restoring the phone Sony Ericsson ZR, C3, E3, it is used specifically by: Standard Firmware from MTS, programmer programmer from ZTE and Hex editor. A detailed description with screenshots of actions, posted on this site page (see link).

Restoring the Sony Ericsson phone through the semctool program.

- This instruction is to restore some Sony Ericsson models. Symptoms breakdown: Phone Sony Ericsson C5, C6603, K610i freezes on "Please Wait", blinking with a white display, no network signal, no connector via DCU-60, nor through "C" either through "2 + 5". The method of restoring the phone phones Sony Ericsson Tablet Z Ultra - DPI located on this site is the use of a service cable, together with SEMCTOOL V8.7, which can be downloaded for free, on the same site.

Restoration of the cell phone Sony Ericsson damaged water - drowned.

- Instructions with pictures, how to restore the phone Sony Ericsson Arc S, K750i, Walkman Mix after falling it into the water. To prevent corrosion of the phone elements of the phone Sony Ericsson XZ 2 - DPI, it is necessary to pull it very quickly from the water and remove the battery. The case is then removed and the phone is placed on two days in a jar filled with rice. The fact is that rice absorbs moisture very well and are an excellent absorbent agent. Ordinary home rice will pull out all moisture from the smallest components of the Sony Ericsson WT19I phone, Xperia X8, Arc S LT18i, and also prevent corrosion. As an absorbent, at home, you can use a filler for feline toilets.

How to eliminate "Error When performing an operation" in Java on Sony Ericsson phones.

- Instructions for users of Sony Ericsson Live, Ray ST18i, C905 with problems with installing applications or games on the phone. If, when you enter the application / game folders, the message "Error when performing an operation" pops up, this means that the Java machine on the telephone telephone Sony Ericsson Z2 White is DPI. The problem can be eliminated by the simple extract and insertion of the memory card into the phone. If it did not help more complex steps. To restore the performance of the Java machine, you will need to reflash the FS file firmware and make the finalization. Read more about how to do this is described in this article.

How to enable Sony Ericsson phone.

To enable Sony Ericsson K850i, X10i, Active touch phone, you need to do the following:

Press and hold the power key while the phone does not depend.
- If the phone was turned on, but the screen darkened, press and release the power key to turn on.
- A lock image appears on the screen to unlock the screen, drag the lock icon or click on it.
- When you appear, enter the code, enter the PIN from your SIM card. In most cases, it is 0000 and click OK.
- Wait for the phone launch.

Note: The PIN from the SIM card is on a plastic card or in a package obtained when purchasing a SIM card in a cellular cabin. But be careful, with not the right PIN code three times, you can activate the SIM card only through the PUK code that is also included in the SIM card purchases. If the PUK code is lost to restore it, it will be possible only by a passport of a citizen of the Russian Federation to which the SIM card is issued. Therefore, do not drive the PIN code is not correct more than three times. If you lost the PIN code and it is not possible to restore it through the telecom operator, you can do the following.

Cancel request to enter a PIN code when you turn on the Sony Ericsson MT15I, Satio, K510i phone. To do this, find another SIM card with a PIN-Code known for you (PIN code can be assigned in the settings) and insert it into your phone. Turn on the phone to the items described above, when entering a password, enter the well-known PIN code from another SIM card. Successfully turning on the phone, go to the phone settings and cancel the PIN input when you turn on the phone Sony Ericsson XA2 Dual - DPI phone. Having done this, turn off the phone and change the SIM cards. Now when you turn on the phone, the system will not require the input of the PIN code.

This is certainly an elementary advice, but there is a solution to problems and more serious.

Council. Initially, the SIM card code is provided by the network operator, but then it can be changed in the parameters menu. To correct the error when entering the SIM card PIN, tap the Delete icon.

Sony Ericsson phone does not turn on! Error in self-testing phone

The very first thing you need to do is try to reflash the phone Sony Ericsson Xperia Neo, C902, J108i. But the problem is not to turn on the phone may not only be due to the "flying" software, but also because of the breakdown of the button for turning off the phone, breakage or failure of the battery - the charger, etc.

The Sony Ericsson phone does not turn on. What to do?.

- Very detailed description of the correction of the problem of the Sony Ericsson T700 phone, W810i, W595 does not turn on how to enable the phone. The article is divided into points, with the solution of each problem on items: Checking the power supply - battery, faulty is faulty, the power button circuit, the power controller, or the violation of its soldering, secondary power sources - the power of the processor, memory and the OST. Devices, Configuring Sony Ericsson XA2 Dual Phone Mobile Phone Software Software.

Phone Recovery Instructions Sony Ericsson XZ1 Black Phone on the OS platform on the screen with a resolution type, type of non-working status - Brick Read more How to restore the device, enable Touch Sony Ericsson Z1 Compact, Z5 Premium, XZ Premium, XA Ultra, Z3 32GB, XA1 Plus , X Performance, Tablet Z Ultra, XZ 2, Z2 White, Xa2 Dual, Xz1 Black, Nwz, M4 Aqua, M2, XZ2, E5, NW, M5, SmartWatch 3, C4 LTE, C2305, XZS, ZR, C3, E3 , C5, C6603, K610i, K320i, Arc S, K750i, Walkman Mix, WT19i, Xperia X8, Arc S LT18i, Live, Ray St18i, C905, K850i, X10i, Active, MT15i, Satio, K510i, Ray, X10, K800i , MINI, Xperia Neo, C902, J108i, T700, W810i, W595, K550i, J20i, K790i, Vivaz U5i, W580i, W, W880i, K530i, S500i, K770i, C510, ELM, S312, WT13i, E15i, K810i, W200i , W995, W100i, Xperia Pro, Play, U5 and what to do if the cellular smartphone does not turn on.

Popular Reviews on Sony Ericsson

	Free download pictures are possible at such types of Sony Ericsson phones, such as simple and touch, for different OS, registration is not required.
	Where to download ringtones for free or listen to music on Sony Ericsson?
	Social network VK.com is the most visited network in our country. It was possible to initially use the network only on a computer, 10 years ago there were no touchscreen phones and neither more Sony Ericsson tablets.
	If for some reason you have difficulty connecting the Sony Ericsson phone to a laptop or PC via WiFi, Bluetooth, USB, read the following instructions.

The Sony Ericsson phone does not turn on. What to do?

If the question does not solve the replacement of the battery to a new or just the battery is loosely adjacent, it is better to carry in the workshop. The battery is equally necessary to replace the new one if you have two years old and you often used the phone.

that list that you have appeared, this is a standard recovery (as a BIOS in the computer) to run it again, you need to install the battery from the phone and insert it. Then simultaneously press the power button and the volume down, and keep it until this recovery list appears. Either, if so it does not appear, recall the battery again, press the power button, and how the Sony will appear, then keep the volume down. If the list appears in order to move up down on this menu you need to build the corresponding volume button up or down. There you need to find such a word Factory Reset, to bring a slider on it (moving using the volume button, as I wrote) and press the shutdown button (it is the lock button) once (this button is responsible for the choice). In general, factor reset is a common full reset, Ie, everything is absolutely on the phone, contacts, sms, etc., from the flash drive nothing will be deleted. Here, try. Unlock

I will not give advice how to reset to the factory settings, I'll just say:

If you are writing, do not understand the technique, then you have a direct road to the workshop to repair cell phones. Everyone should do what he can and what is trained. Of course you can try to reset on factory settings, but if it does not help, it is better not to suffer, and entrust repair a professional.

Most likely, not everything is so bad as it may seem at first glance. Turn off the phone completely, pull out the battery, hold for fun 2-3 minutes, insert it back, and clamp the quot key combination; sound volume down (or -) and the homequot button; (with a drawn house), turn on the phone without releasing the specified keys. You can enter this safe mode. If it starts, try to restore the operating system via Settings, further backup and reset;, there Common reset; Select.

Maybe I can't help you, but I somehow had a panic - a new phone did not turn on. It turned out, just need charging. Maybe you have the same thing? And I can not help anything else, I'm sorry, nothing in the device does not mean anything in the device.

I want to upset you - if a branded inscription appears on the phone when you start, it doesn't matter, let it even sony., though nokia, though samsung., I heard the launch vibration and after that it goes out - then the settings will no longer help, LH power control And it needs to be either changed, or it is possible to simply repair, but in any case you carry the device in the workshop - it costs it is not expensive in the tales of 40 bucks with work!

I have two options for such behavior of your Sony Ericsson.

1. Power problems (battery is not charged or damaged).
2. Problems with phone firmware.

Tips: Try charging the phone, contact the service center.

This is the official instruction for Sony Ericsson Xperia Ray in Russian, which is suitable for Android 2.3. In case you updated your Sony Ericsson smartphone to more "fresh" version or "rolled out" to earlier, then you should try other detailed instructions for use, which will be presented below. We also suggest familiarizing yourself with the fast user instructions in the format question - answer.

Official site Sony Ericsson?

You hit the point, since all information from the official website of Sony Ericsson is collected here, as well as the mass of other useful content.

Settings-\u003e About the phone :: Android version (several clicks on the item will be launched "Easter egg") ["From the box" version of Android OS - 2.3].

We continue to customize the smartphone

How to update drivers on Sony Ericsson

You need to go to "Settings -\u003e About Phone -\u003e Version of the nucleus"

How to enable Russian keyboard layout

Go to Arzde "Settings-\u003e Language and input-\u003e Select Language"

How to connect 4G or switch to 2G, 3G

"Settings-\u003e More-\u003e Mobile Network-\u003e Data Transfer"

What to do if you have turned on children's mode and forgot password

Go to "Settings-\u003e Language and keyboard-\u003e Section (keyboard and input methods) -\u003e put a tick opposite" GOVER Voting "

Settings-\u003e Screen :: Screen Motor Direct (Remove Tick)

How to install a melody for alarm clock?

Settings-\u003e Screen-\u003e Brightness-\u003e Right (increase); left (reduction); Auto (automatic adjustment).

Settings-\u003e Battery-\u003e Energy Saving (put a tick)

Enable battery charge status display in percent

Settings-\u003e Battery-\u003e Battery charge

How to transfer phone numbers from the SIM card to the phone's memory? Import numbers from SIM

1. Go to the "Contacts" app
2. Click on the "Options" -\u003e button Select "Import / Export"
3. Choose from where you need to import contacts -\u003e "Import with SIM card"

How to add contact blacklist or block phone number?

How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)

1. You can contact the operator
2. Or read the instructions for

How to install ringtone on the subscriber so that each number has its own melody

Go to the "Contacts" application -\u003e Select the desired contact -\u003e Click on it -\u003e Open the menu (3 vertical points) -\u003e Set ringtone

How to disconnect or turn on the vibro-block keys?

Go to settings-\u003e Language and input -\u003e Android keyboard or Google keyboard -\u003e Keyboard keyproof (remove or put a tick)

How to install a melody on an SMS message or change the sounds of alerts?

Check out the instructions for

How to find out which processor on xperia ray?

You need to see the characteristics of Xperia Ray (the above reference). We know that in this modification of the device chipset - Qualcomm MSM 8255, 1000 MHz.

Settings-\u003e For developers-\u003e USB debugging

If there is no item "for developers"?

Follow the steps from the instructions

Settings-\u003e Data Transmission-\u003e Mobile Prafik.
Settings-\u003e More-\u003e Mobile network-\u003e 3G / 4G service (if the operator does not support, select only 2G)

How to change or add an input language on the keyboard?

Settings-\u003e Language and input-\u003e Android keypad-\u003e Icon settings-\u003e Input languages \u200b\u200b(puts the tick opposite the necessary)