Configuring CI (CAM) Tricolor modules on TVs of different brands. Configure and Connecting a CAM module tricolor TV set SAMSUNG TV 6 series tricolor Ci

Channel settings can be made in several ways:

You can use the operator channel configuration, for this you need to go to the parameters (settings) of the CAM CI module in the menu of your TV. Select "Update Channel List" and then follow the prompts on the screen. Sometimes the TV can offer to use the operator profile to configure the channels. Thanks to this search, we will get branded sorting of canals - news, movies, sports, all, etc.

Or use manual channel search (on some models it is only possible to configure channels).

For us there should be a digit - 10750 in the upper and lower range (sometimes in the settings only one line). Also check the name of the satellite - EutelSat 36 / Express AMU.

Now you can start searching for channels, consider an example on the LG TV.

We go to the "Manual Setup" item (sometimes this item is inactive, then you need to start the autopoisk and immediately stop it). Select the frequency of the transponder (if there is no, then you just need to create). Frequency - 11881 and launch the search.

Now the same frequency, but with the active checkbox "Network Search". So our TV will find all channels.

In the Samsung TVs, you first need to remove the channels passing the path:

"Menu" - "Broadcast" - "Changing the Channel", then in the opened window in the lower left corner select "Select All" and after "Delete". After we need to return to the "Broadcast" submenu and select "Channel Settings" - "Manual Setup".

On the TVs Sony, the search and editing of the transponder can be performed via auto parts for this way:

"HOME" - "Settings" - "Digital Configuration" - "Auto-tuning of the satellite". In an antenna configuration item, a fixed antenna should be.

We continue:

"Next" - "Reinstall Satellite Settings" - Next, repeat - "Digital Configuration" - "Auto-Tuning of the Satellite" - "Antenna Configuration" - "Next" - "Select Scan Type" (we need a "network scan", "all" channels, "All stations")

We continue:

"Next" - "satellite 1" - "LNB configuration (lower and upper ranges - 10750).

After you need to return back using the "Back / Return" button and go to the "transponder" where we can set the frequency of 11881.

Then return twice back using the "Back / Return" button and click "Start".

class \u003d "Eliadunit"\u003e

If your TV supports CAM modules, then you can watch paid satellite TV, such as "Tricolor TV", "NTV Plus", "Telekarta", "Rainbow TV", etc. It is enough just to purchase a smart card by the operator you need , Module for this card, and insert a map with a module in a CI TV slot.

When choosing such a TV, the main thing is not to confuse it with DVB-T2, even if you say the seller what you want a TV with a built-in receiver, it can make you instead of DVB-S2, DVB-T2, and these are completely different things. Usually by the name of the model, you can read what type of receiver is installed on the TV. For example, "LG" in the name of the model "47LM580S-ZA" letter "S" suggests that the TV has a built-in DVB-S / S2 receiver.

The surest way to determine the presence of a satellite receiver from a TV is to look back, where all connectors are located, and find the antenna input "LNB IN".

All such TVs have a "CI" slot for "CAM" modules. "CAM" The module is selected depending on the encoding in which the content is encoded, for example, if it is a "tricolor TV", then you need a "Drecrypt" module and preferably the latest version. There are no problems with the module, it can be easily purchased in a special store.

Brief instructions for setting up the module "Tricolor TV" or "NTV Plus" on LG halees.

1. Install a smart card accessory "Tricolor TV" in the Conditional Access Module Tricolor TV (CAM West Ci +). Chip to the thick side of the module.

2. Install the conditional access module in the TV turned off.

3. Turn on the TV and see the information about the module and the access card, if there is no information or error code 17, check the installation correctness and go to the registration of the equipment on the Tricolor website.

4. In the TV menu, in the settings, select the type of antenna " satellite" In the settings of the Satellite Antenna Converter Tricolor specify satellite EutelSat 36A / 36B. Converter type single. Converter nutrition (LNB) - ON. LNB 10750.. Transponder frequency - 12226 MHz or 12111 MHz or 11881 MHz (settings are default) Flow speed 27500. We look at the quality of the signal.

5. Go to channel settings and turn on automatic search (in the new generation TVs) the transponder frequency from 11881 to 12418 will be cut automatically. At the same time, it is desirable that the TV will flash the last version of the software, in this case the CAM module Module tricolor CI + will work more correctly, all transponders will be relevant, and you correctly scan the desired channels.

6. If everything has passed successfully and the channels are found, go on the TV in the sound settings and exhibit in the section " Digital TV Sound Settings"Parameter MPEG. This is done in order not to disappear the sound on the channels when viewing. Go to the module settings CI data (CAM) orCI\u003e Settingsand choose the item " Reset to factory settings". Turn off the TV completely.

9. An important feature of LG TVs is the function "Automatic channel update" It must be disabled, otherwise the TV will periodically drop the channel list you configured.Go to Settings "Auto-revenge channel "and set the parameter: OFF.Now you can fully enjoy the features of your TV, looking through high definition channels. Pleasant viewing and bright emotions!

NOTE:

Problems with sound or incorrect switching channels tricolor TV on the CAM module are eliminated in updating the module itself in December 2014.

To independently update the CAM module in the TV, find the TV service channel for updating the operator in the list of Channels Telemaster. "Usually he goes under the number333 according to the operator list. If it is not in the list, scan the channels on the new one.

After you switch to it, you can update the CAM tricolor TV module through the TV menu CI data (CAM) or CI\u003e Settings\u003e Software Download\u003e OK. If a new software is available and a proposal will appear. Update click OK. On the remote control after the record, the percentage of software updates will go. It is necessary to wait for a full load on the module from the satellite and upon completion of the update, reset the module to the factory settings: CI data (CAM) orCI\u003e Settings\u003e Reset to Factory Settings\u003e OK

After the update, everything works correctly, no glitches are observed, all channels are always in place and with sound. Checked!

Also in the menu CI data (CAM) orCI\u003e Information\u003e Smart Map\u003e Providers\u003e Tricolor TVyou can see information about the packages and timing of their endings.

Deciphering subscription classes:

Also in the menu CI data (CAM) orParameters CI\u003e Information\u003e Smart Map\u003e General Informationyou can learn ID number Smart card tricolor TV to extend and connect different packages of television channels.

If after changing the frequencies by the driver Tricolor TV you do not have any channels on the TV, or the number of channels after scanning less than 100 do the following: (thanks to the user Dim)

The problem was similar as everyone. 70 channels, scatter numbering, etc. etc.
According to the CAM module - the current, on the TV (let's say LG MT24) - the latest version. After the update, nothing has changed.

Reset TV to factory settings. In the settings of the satellite antenna and channels, we set a satellite for tricolor and NTV + - "EutelSat 36B" or "Express-AMU1" or "Express AT1" in position 36 ° E.

The settings can also create a new satellite with the desired parameters:

Converter Type: Single / Single

Power LNB (ON / ON)

Enough to add one transponder / frequency Tricolor TV: 12111MHz or 11881 MHz Horizontal 27500

The most basic one is to choose from the transponder list one of the transponders tricolor TV 121111MHz or 11881 MHz dance-H (horizontal) flow rate 27500.

Then choose a manual search, select the home transponder for tricolor (12111 or 11881) and be sure to check the network / nit search. We click to update and wait for some time. All channels must register in normal numbering. Good luck to you.

The standard set of equipment for access to satellite television includes a television programmer, a satellite antenna and a receiver that ensures their connection. However, without the last device, it is quite possible to do if you purchase a TV with Ci (myself) module. This module, in fact, performs the functions of the built-in receiver, but it can be reconfigured, at the request of the subscriber, on any operator, including the Tricolor TV. Configuring a CI module to a satellite tricolor can be performed by the subscriber independently, without attracting the company's technicians. Tell how to do it.

General information for all subscribers

With the help of the CI module, the subscriber can be viewed as television programs in standard quality and HD channels. To gain access to broadcasting, it is necessary that the equipment installed in the house has responsible for the minimum standard requirements for the operator.

equipment requirements

The TVs equipped with a CAM module can work with a tricolor content only provided that the subscriber's antenna is configured to the EutelSat W4 satellite (currently called EutelSat 36A / 36B). In this case, no special frequencies of configuration tricolor TV for the CI module will not have to post - the devices will find the signal automatically.

In addition to the satellite requirements, there is another nuance - the user's television manner must be equipped with a satellite tuner host signal in DVB-S2 format. It is also desirable that the TV has supported support 4K UHD and HEVC. This will make it possible to view channels from the Ultra HD packages on it.

Important! If there are no support for these formats, even channels from standard packages may not be available.

Well, in addition, to access broadcasting, you will have to purchase a smart card from the operator and connect it to the equipment. When the installation is completed, you can start settings.

Instructions for TVs of different models

The procedure for holding configuration operations will depend on the model of the television. In detail and with illustrations, all settings are usually described in the instructions for a specific device. We only give overall information.

Important! Subscribers who have already attempted to set the parameters of the module and not resulting with the result, in front of any repeat operations it is recommended to roll back the TV installation to the factory.

After installing the CAM module, you must go to the appropriate port in the TV settings and set the following parameters there:

antenna - satellite;
converter is single;
satellite - EutelSat 36A / 36B;
converter - ON (hereinafter referred to "LNB");
transponder frequency - 12226.

Then keep the settings and check the signal quality. For normal operation, it must be at least 80%. With an insufficient signal level, it is worth checking the connection of the receiver with an antenna and, if necessary, to reconfigure the latter.

Next, go to the menu item "Channel Settings" and install automatic mode in it. After the instrument detects and display the list of found channels found, it will need to save it.

Then go to the "Sound Settings" item and install MPEG4 mode in it. It is necessary that the sound does not have the sound and walked synchronously with the image during broadcasting. And the final stage - the transition to the menu section "CI" menu and rollback to factory settings.

The receiver is turned off for 5-10 minutes, then turn on again, transfer to one of the coded channels and leave for several hours. This is required in order for the device to receive activation keys from the satellite.

Important! Obtaining activation commands should also complete the configuration of the CI module tricolor on the Samsung, Sony, Philips TV and other models.

Instructions for samsung television

The owners of the Samsung TV books also go to the device menu and select the "Satellite Channel Settings" section. It will already have a valid satellite. The mark must be removed, and then put a tick at the very end of the list of sources of the signal, in the "User SAT1" row. It is necessary that the device receives a signal from the Tricolor operator. Configuring the CI module on the Samsung TV continues to install the LNB parameters in the corresponding section of the main menu. Here it is necessary to set the value of the lower frequency limit in the same way as the top.

The next section of the menu to set the parameters is "broadcast". It is necessary:

go to subparagraph "Channel Settings";
choose manual mode;
find the installed satellite USER SAT1;
press the "Transponder" line to the word "create";
set the operating frequencies and the transfer rate;
save parameters.

Next, you need to click "Search", evaluate the signal level and start searching again. Equipment should find at least 6 TV channels. To connect the rest of the content, you must again go to the "Transponder" section, enable network search and press the "Search" button again. As a result, the module will find all available channels and make a television interface available to the subscriber.

Setting the CI module tricolor on Sony TV

To access broadcasting on Sony TVs, you must act according to the following algorithm:

select the "Installation" point in the instrument menu;
go to the "Digital Configuration" subsection;
select the line "Auto-tuning satellite";
in the "Antenna Configuration" window, establish a "fixed antenna or DISEQC";
in the scan window, leave the default parameters;
in the next window, turn on the satellite at number 1.

Next, the LNB configuration is installed. The upper and lower frequency range is installed in accordance with the antenna model (values \u200b\u200bare written in the instructions or directly on the converter case). Now you can return to the list of satellites and click the "Start" button located below it. After that, the module will automatically launch the search for available TV channels. Upon completion, only save the list of found content will remain.

Configuring the tricolor CI module on Philips TV

Philips has no agreement with the Tricolor on the introduction of their parameters in teleprebris. Therefore, during auto search, the CI module of this equipment sees all the frequencies of the working satellite, including programs not only tricolor, but also NTV +. To access the desired operator, you will need to do the following:

go to the "Installation" menu item, following "Satellite Search";
click "Reinstall channels", then "Start";
wait to display the signal scales on the screen;

First connect the satellite antenna to the TV. The satellite antenna is connected in two ways:

If there is a "Satellite" connector, the antenna connects directly to the TV. The TV will independently receive a signal from the antenna and display the image on the screen.

If there is no "Satellite" connector in the TV, the antenna connects through the satellite receiver - the device that receives a signal from the antenna and displays an image to the TV.

Externally, the receiver is similar to the usual video recorder

After connecting the antenna, find the channels. Ways to search for channels depend on the TV and from the method of connecting an antenna.

Step 2. Run the channel search if the antenna is connected to the "Satellite" connector

Search channels with a choice of operator from the list

Works on Samsung TVs 2019-2015 (R, N, M, Q, LS, K, J-series).

The easiest way. The TV will receive a fixed list of channels, you can not adjust the order or remove unnecessary.

Automatic channel search

Works on Samsung TVs 2019-2012 (R, N, M, Q, LS, K, J, H, F, E, D-series).

It takes a lot of time, the TV will find all available channels. It is impossible to adjust the order or remove unnecessary.

Manual channel search

Works on Samsung TVs 2019-2012 (R, N, M, Q, LS, K, J, H, F, E, D-series)

It takes a lot of time, you need to know the parameters of each transponder. Allows you to find only those channels that are needed, and customize their order.

After connecting the satellite antenna to the "Satellite" connector, turn on the TV and log in to the menu.

Enter the "Broadcast" section and select "Advanced Settings". If this item is not, select "Channel Settings".

Select "Satellite System". To enter this item, enter the PIN. The default is 0000.
Open the "satellite selection", select "User SAT" and click "Save".
Turn on the "Power LNB" item if it is turned off.
Select "LNB Settings".
Enter the data for configuration:

Set the transponder settings;

Make sure "DiseqC mode" is turned off if it is not used;

Install the "Upper LNB" and "Lower LNB";

Install the "tone - 22 kHz", depending on the type of LNB.

Specify all data from the satellite operator.
After entering data, check the quality of the signal.

If the signal quality is from 100 to 80, click "Close".

If the signal quality is below 80, try turning off "tone - 22 kHz". If it does not help, check the installation and connection of the antenna. Low signal quality suggests that a bad signal comes from the antenna. The TV will not be able to find the channels or will show them with interference.

Return to the "Advanced Settings" item (using the Back button) and select "Manual Setup".
Select "Transponder" → "Create".
If you want to find the channels on one transponder, in the Network Search item, select "Disable". If you need to find all channels - select "Enable".
Click the Search button.
Wait for the searchable channels.
Ready. Click the OK button and exit the menu.

Step 2. Run the channel search if the antenna is connected to the satellite receiver

Before searching the channels, connect the TV to the satellite receiver (via HDMI, tulips or other cable). Then configure the receiver. How to do this, see in the instruction manual or contact the satellite operator.

Unable to watch encoded channels. What to do?

To view the encoded channels, connect the CAM module to the TV. Buy a CAM module at a satellite operator or in electronics stores.

Modern TVs have long needed to connect additional equipment and are able to receive and process a signal from the satellite without connecting the receiver. Now, to watch satellite television, it is enough to purchase the CI module offered by the company.

This device allows not to bargain the space of the apartment with excess technique, leaving it as spacious and elegant as possible. At the same time, the quality of broadcasts remains at the highest level, even when it comes to channels in Ultra HD. As a result, users get the maximum benefit from all possible parties. And the only disadvantage of such devices is unusual adjustment that can cause complexities from unprepared subscribers.

What is a CAM module

Those who have not yet come across the modules of the tricolor TV should be aware that this device is a portable analogue of standard receivers created specifically for smart televisions.

They represent a small plate into which the smart card is inserted. It is this device that receives a signal from the satellite and decodes it to view the TV channels.

At the same time, wishing to buy a cam module will have to think in advance about whether the TV used by them with a new device is compatible. Additionally, clarify whether the reception is maintained in the subscriber's stay. This information is able to inform the official distributors of technology or consultants of the contact center.

General information about setting up a CAM module tricolor TV

Deciding to engage in self-configuration are obliged to know that, as in the case of mostly similar equipment, there are both universal devices and a tricolor CAM modules that can receive a signal only of the mentioned provider. Professionals are recommended to acquire the second type technique, since it is much easier to set up.

Additionally, it is required to remember the differences associated with television models. The procedure for connecting to satellite television on LG and Samsung TVs has several differences that need to be considered. Next about them will be described in more detail.

Configuring the CI tricolor module on Samsung TV

Most of the modern equipment can be set up in automatic mode. If it has not begun, you will have to configure the tricolor with the CI module for the Samsung TV manually. To do this, you will need:

on the start page to select the satellite USER SAT1;
then, in the LNB section, you will need to install the lower limit of the frequency, which is obliged to coincide with the top;
after that, the user will have to switch to "Channel Settings";
re-specify the satellite and click the item "Create" in the string "Transponder";
then you will need to specify frequencies and speed (they are present on the satellite company website and in the instructions for the module);
saving the specified parameters, the subscriber will launch the search.

To get a full list later, you will have to start the search reused. On this setting, smart TV Samsung ends, and viewers get the opportunity to watch TV channels.

Setting the CI module tricolor on LG TV

Preparing for the operation of the conditional access module Tricolor TV on LG will be slightly simpler. Wishing to watch satellite television will have:

on the start page, set the basic parameters by specifying the type of antenna (satellite), converter (single), satellite (EUTELSAT), frequency 12226, power (ON);
after saving the listed parameters, the user will be asked to check the signal level (receiving quality must exceed 80%);
the next step is to switch to the searches for the TV channels and its launch in automatic mode;
then you will leave the save button and configure the sound in the corresponding subsection (MPEG4 must be);
the last step will go to the start page and the introduction of the activation code.

Sometimes before entering the code, you must reset the settings to the factory level. The rest of the equipment is ready for work and subscribers can already watch favorite programs.

Problems and their decision

Despite the simplicity of preparation for the work of the Kam-module of the Tricolor Ultra HD, some users are able to face sudden problems. Usually they turn out to be caused:

incorrectly inserted smart card;
failure in equipment;
errors of users themselves;
incorrectly rotated antenna (the timing scale on the screen will be below 80%);
the discrepancy between the TV is modern requirements.

Practically with each of the listed troubles, the customers of the satellite company are able to cope on their own. So, it is often enough to check the correctness of the connection and re-configure the procedure.

Sometimes you need to go to the module menu and reset the settings to the factory level.

In the most difficult situations, you will have to call the Contact Center consultants. But it is important to prepare information in advance that will allow them to recognize the caller. It includes passport details, connection address, service contract number, smart card ID.