Login to settings on ASUS routers (192.168.1. ASUS APRP What is this program and is it necessary? What does registration in ASUS

In order to configure the ASUS router there are two ways. The first is to use the special wizard of the fast device setup. It is specially integrated into a web configurator so that an unprepared starting user can easily connect the router to the provider's network and raise the Wi-Fi wireless network. Of course, it is very limited to it, but the most basic functions of the router it allows you to set up without any problems.

The second way is to work with a full-fledged web interface that allows you to fully reveal the entire potential of the device, if necessary, squeezing everything that it is capable of. Consider each of the options separately.

In both cases, in order to enter the ASUS router configuration interface, you need to enter the IP address of the device in the web browser address bar. 192.168.1.1 . When you request authorization, enter the "admin" login and the "Admin" password.

Fast Internet Setup on Asus Router

For the first time hitting the web configurator, you will see the wizard invitation to quickly configure the device. Agree. The first step will be a mandatory change in the default password to access:

Instead of the default "Admin" set any other. It is desirable that it is more or less complicated: consist of 7-8 characters, contain letters of the Latin alphabet, numbers and special characters @ # $% &.

The next step will be the choice of the type of connection to the Internet:

Routers Asus are able to work on a network of almost any Russian Internet provider - Rostelecom, Dom.ru, TTK, etc. The main thing is that it is necessary to clarify in advance in advance what communication operator uses in advance.

Most often used either "Automatic IP (DHCP)" and "PPPOE".
In the first case, usually do not specify anything additionally, but in the second - it will be necessary to enter a login and password for the connection that you were issued at the conclusion of a contract with the provider. Click on "Next".

In the next step, we will configure the Wi-Fi Wireless Network:

Here it will be necessary to register the name of the network SSID. and password for it - Network key. In the case when you configure a two-way router, you will need to enter the name and password WiFi for the 5GHz range. Click on the "Apply" button.

At the last step of the wizard, you will see summary information:

How to configure ASUS router for Rostelecom, TTK and Dom.ru

This manual is up to date for ASUS RT-N10, RT-N11P, RT-N10, RT-N11P, RT-N12, RT-AC51U, RT-AC52U, RT-N56U, RT-AC52U, RT-N56U and RT-N66AU, as well as for all other models working on AsusWRT software. Interfes in dark colors).

In order to configure a connection to the provider, go to the "Internet" section, the "Connection" tab. It looks like this:

Most branches of the largest Russian providers Rostelecom, TTK and Dom.ru uses the PPPoE protocol. Select it in the "WAN-Connection Type" field:

Be sure to note that the "Yes" flags for WAN, NAT and UPNP are installed.

Below note that checkboxes "Yes" for items "Get the WAN IP address automatically" and "connect to the DNS server automatically":

In the "Account Setup" section, you need to specify a login and password for connecting the ASUS router to the Internet that you were issued at the conclusion of the contract.

No parameters need to be changed. Click the "Apply" button and check Internet access.

Dynamic IP (DHCP)

In some branches of Rostelecom and TTK providers, the type of connection "Dynamic IP" is used when the router address receives from the DHCP server of the provider and no other connections and protocols to use.
To configure, you need a WAN type to select "Automatic IP" (Automatic IP).

Be sure to check that all items indicated in the figure are noted.
Especially note that the address of the DNS servers should also be obtained by the device automatically.

How to configure ASUS router for Beeline

The Internet Provider Beeline uses the L2TP protocol to connect:

Getting an IP address and DNS server are left automatically.
In the account settings, enter the "username" (usually this is the personal account) and the password, which was issued by the representatives of the operator.
It remains only to enter the address of the VPN server Beeline: TP.internet.beeline.ru
Press the "Apply" button.

Setting up Wi-Fi (Wi-Fi-Fi)

In order to configure the usual WiFi network in the 2.4 GHZ range on ASUS routers, you need to select the "Wireless Network" item and the General tab:

In the SSID field, you must enter the name of the Wi-Fi network created. In this capacity, you can use any word in English. Then you need to select the "WPA2-Personal" authentication method and enter the password in the WPA Plug. As a rule, it is not necessary to change anything more, since the most optimal parameters are set by default.

To set up WiFi 5 GHz on ROTERS ASUS (RT-AC51U, RT-AC52U, RT-AC55U, RT-N56U, RT-AC66AU and AC68U), you need to set a value in the "Frequency Range" field 5 Ghz.:

And then everything is exactly the same as usual: we prescribe "ssid" (it is desirable that it is slightly different from the one that is used by 2.4 GHz), specify the "WPA2-Personal" test method and the WiFi password, press the "Apply" button .

Old web interface

If you use the old ASUS router firmware made in blue-blue tones (RT-G32, WL-520GC, etc.), then in this case, just act by analogy. Here are some video instructions that can be useful for you:

As you can notice from the video - on the designation of key parameters in different versions of the firmware there is no difference.

Our site already has detailed instructions on the entry in the settings on routers of different manufacturers, and even eat. Today we will look at how to go to the settings on ASUS routers. The process itself is practically no different from other manufacturers, but since ASUS devices are very popular, then the article will definitely not be.

We will do everything according to the standard scheme: first you connect to the router over a network cable, or Wi-Fi network, then go to the control panel through the browser. Go to the settings and change them, you can almost with any device. From the computer, laptop, tablet, telephone, etc. But, if there is an opportunity, I advise you to use all the same laptop, or a stationary computer, and to go to the settings on the network cable. Wi-Fi can also be, just do not flash your router on a wireless network, and that is, the probability of getting a brick :)

We get access to the settings of the ASUS router

If you are already connected to your router, then scroll down the page slightly below. You can skip the connection process. If not, you need to establish a connection via cable, or via Wi-Fi. Let's first consider how to connect to the ASUS router using a power cable.

Everything is very simple. We take a cable that comes with a router, and connect it to the router in the LAN connector (Look carefully, do not connect to WAN, they are signed). And on the computer, or laptop, connect the cable to the network connector. Like that:

Turn on the power of the router (if not yet included) And you can continue. If the WAN cable is connected to the router, then it can not be turned off, it will not interfere with it.

Wi-Fi connection

If you have already configured your router, connect to your wireless network. I think you know how to do it (if not,). If the router you have a new one, then immediately after connecting to the power supply, it will begin to broadcast the wireless network with the standard name. Most likely, it will be called "ASUS" and will be without a password. Just connect to it from that device from which you will go to the control panel.

How to go to the settings if you forgot the password from Wi-Fi?

If you have forgotten the password from the wireless network, and you do not have connected devices from which you could go to the control panel and view the password, you can go to the cable settings. And if there is no such possibility, you can make a reset of the settings of your ASUS router (Press the RESET button for 10 seconds) and set it up again (Wi-Fi network will be without a password).

Go to the address 192.168.1.1

After we connected to the router, open the browser and type the address in the address bar. 192.168.1.1 . Go through it. If the router has not yet been adjusted, then the page with the settings will immediately open, there will be a quick setting of ASUS-A. If a login and password request appears, then standard - admin. and admin.. If you have not changed them yet. And if you changed the password to enter the control panel and forgot it, you will have to reset the settings.

Standard data to access the settings are located below the router itself.

What if it does not enter the ASUS router settings?

It all depends on what problem (error) and at what stage you appear. Many problems appear at the router connection stage. Or, after connecting, the "page is not available" does not open in the browser, it is impossible to go to 192.168.1.1. These are the most popular problems.

Try to do the following:

• Check the article on this issue:
• Necessarily.
• If automatic receipt is set in the IP tinctures, and the problem remains, then check whether you have connected the cable to the computer and the router. Or are you connected to a Wi-Fi router network. Check if the power is included on the router (Must burn the power indicator).
• Try to enter the control panel from another device.
• If it does not enter the ASUS router settings when connected via cable, try to connect via Wi-Fi. And vice versa.
• Make a reset settings on routers. Try to open the address 192.168.1.1.

If something does not work, you can write about this in detail in the comments, we will deal with your problem together.

Hello everyone let's talk about such a program as ASUS APRP, which is decrypted as ASUS Product Register Program (like this). Of this long name, it is already clear that this program is needed to register an Asusovsky product, that is, devices.

Honestly, I do not quite understand what this product registration is needed. Well, really. I read on the Internet and came to the conclusion that Asus himself says that you are saying that you bought our device and to get warranty service to do not register the product during the month from the date of purchase. Well, a little strange, because I bought my Asusovskaya fee in a large online store and there I didn't say a word about some kind of registration in some kind of prog. Bought, the warranty card was already filled, everything is as usual. So this online registration from Asus I think that you need type so for a tick and no more. It is unlikely that the service centers do not accept Asusovsky product warranty, if he is not registered through the ASUS Product Register Program program, it is already nonsense

But I also fought online and found info that gives this Asusovskaya registration of the product .. unfortunately nothing special, you just have some kind of personalized maintenance. Maybe it means that there will be technical support, then yes, there is such a thing. There is a software for Lenovo devices and here there is support, that is, you can write directly in the prog to some problems with the device. I certainly like this chip

Even if you register a device, you will receive gift access to the WebStorage service (cloud file storage), whose volume is 5 gigs. Well, I do not know what to say here, it is generally chic! However, very many users have an Asusovsky laptop, all the same, the company is popular. So, what am I it. What do 5 gigs of the cloud give everyone? Maybe there are some special conditions .. I do not know, for I have not checked .. but smells the shine ...

Well, actually, as I wrote, some of the advantages from registration of the device in Asus. Where it would be better if, for example, after registration, you could get a discount of 20% for post-warranty repairs. Well, it's as an example, but agree, it would be much more useful if it was ..

So, we now go to watch what ASUS APRP program is more detailed, what and where it puts there and all that .. it means there is a prog to this folder:

C: \\ Program Files (x86) \\ ASUS \\ APRP

As you can see there, APRP.EXE files (probably the main program of the program), AprilTascheduler.exe (something connected with the scheduler) and asusproductreg.exe (applies probably to the registration process itself).

I looked still in the services, there is nothing about the ASUS APRP program.

I tried to boost executable files, well, from the folder where Asus APRP was installed. Running aprp.exe, zero reaction. Launched the later an aprptaskscheduler.exe and also zero reaction. But when I started already asusproductreg.exe, then such a window appeared:

But this is what else interesting, after a second in this window, another page seemed:

Do you know what I will even say you? I will not register here, well, I really have a little bit of this, but I will advise you not to pass by! If there is time, register your laptop there, well, I don't know, it will not be worse, but you can not know something more interesting and learn ...

Wrap! I made a shorter reboot and see that already in the task manager there is a process aprp.exe, that is, when I started the files there from the folder, then I apparently activated something, I do not know. In short, the process appeared and this is the fact of Mazaphine:

And then in seconds, five appeared such a window:

This window and works under the APRP.EXE process! These are such pies ..

When I pressed no thank you in this window, then the window was gone along with the process. I made a reboot for interest again and looked, the process aprp.exe was again in the dispatcher, well, that is, everything is clear already, the program is automatically launched with Windows. But now what another joke, I noticed if you press Win + R and write a msconfig there, the system configuration window opens. And in it on the Tab Table there is nothing related to ASUS APRP Prog! Well, where does it start thinking you? For this I launched the CCleaner program, I switched to the SERVICE section, and there he chose a startup:

Then I pressed the planned tasks there and most importantly, here I put a check mark the advanced mode and here there is an entry about the ASUS Product Register Program program:

Well, you can simply click on the right button on and select it off there:

Well, everything, more prog will not be loaded with Windows

Well, I figured out with the prog, otherwise it was already a little quashed ..

Now go to how to remove ASUS APRP. So this can be done both in a simple and advanced way using a remote control. He and the program will remove and all garbage will also find and removes it! But you are, my business is to offer, but to use a dress or not, it is already purely your decision ...

Well, now how to remove it easily. Well, as usual, press the Start menu and select the control panel there:

If you have Windows 10, then there is no controversy, but there is this item in another menu to open it, then heal the Win + X buttons!

Now find the program icon and components there:

And here you need to find a program, although what to look for it there, it should go first, press on it right-click and select Delete:

Then there will be such a small message, here you click yes:

Such a small window will open, it will hang a little, well, this type is removed there.

And all the guys, then everything will be removed and the programs of ASUS Product Register Program You will no longer be on my computer!

On this, everything, from the pure heart I hope that everything I wrote here is that it was for you at least a little useful. Good luck in life and good mood

31.08.2016