Sooner or later, the standard firmware begins to bother or buggy, because of which most users begin to "read" mobile forums in search of a solution. There's already an understanding: To change the firmware, you must first reinstall the recovery. Forum users advise to install TWRP, referring to its maximum stable work and the ability to work with sensory control. Therefore, it is worth telling how to install TWRP Recovery on Xiaomi, what problems may occur at the same time and disclose the options for their solution.

In general, it is an abbreviation, and it is deciphered as Team Win Recovery Project, thereby telling that the project is: a modified recovery that allows you to do much more than factory utilities. First of all, it is set to install the custom firmware on their device, which is why TWRP is appropriate: a full backup system, installation of software, firmware, nuclei, full wipes and a bunch of everything that hides from the user "stock" (factory) menu.

With Xiaomi Situation Standard: The basic recovery is not suitable for installing a custom firmware, for the first simplicity does not allow this, because of what the people comes to TWRP. In addition to the previously mentioned, Team Win can fully restore the firmware from the recovery file. So, this is an excellent tool for lovers to be renounced: even if after changing the firmware, the smartphone "died", it will be possible to "revive" without any problems.

In addition to such a killer - feathers, TWRP can provide full job With the device files, creating partitions in memory, approximately as on your desktop HDD, connection to a PC in a flash card mode, while the system starts to be required. Very convenient, for example, the wipes have already been made, and no one has moved to the firmware to the storage device, which was repeatedly with your submissive servant.

Installation TWRP Recovery.

Through the official app

Starting with the fact that there are several ways. The first, the easiest - the use of a branded application or its analogues, should only be remembered: for correct work it is necessary. In Xiaomi, they usually already have advanced users, it remains only to give them an application. Otherwise, you will have to first get those right, after which it is already thinking about installing the recovery.

The action itself is literally a few steps:

• Find an app on expanses Google Play.;
• Install it and run;
• Agree with all permits, provide root access, if it was not done earlier;
• Select your device and download the file using the "Download TWRP" button;
• Select the downloaded img file and put it through the "Flash to Recovery" button.

Here, perhaps, it is worth notifying: the name of the IMG file must correspond to the program: usually this is recovery.img, but branded applications, like TWRP, may require calling files in a special one. In the case of Team Win, it is TWRP.IMG, however, before installing, you should carefully read the program Description, where, most likely, the necessary name will be indicated.

After such an installation on Xiaomi Mi3, for example, the smartphone will automatically start in Recovery mode, from which all the necessary manipulation users will already be performed. It should be noted: Stock Flash when installing a custom menu "Follow" will not be in any case, and it derives not only xiaomi.

Through FastBoot.

The second way is a little more complicated: here you will need the most basic skills of working with the console and ADB, as the option is the Recovery installation via FastBoot. Your device must be. So, the installation itself is done in several stages itself.

1. The first is to load the ADB drivers and their unpacking. Here you should take care so that only Latin characters be on the path to the file, otherwise the console will give an error.

1. Install the drivers for your device taken.
2. The next step is to enable USB debugging. Make it very simple: To begin with, we open the item "On the phone" on the smartphone, after which you need to press 8 times on the version of MIUI. The message "You - Developer" should appear. If this does not happen, then you either have access to the settings for developers, or the firmware simply does not allow this.
3. The next step will be directly inclusion of debugging, which is done in the settings item for developers.

1. We launch the command.bat file from the ADB folder, we produce the "AdB Devices" command and check if the smartphone is connected correctly, which you may need to confirm authorization on the smartphone screen. If nothing happens during such manipulations - check the device connection, reinstall the drivers. It is better to be renewed here.

1. Run FastBoot Mode on your smartphone using the AdB Reboot Bootloader command. After the command, the smartphone must automatically reboot and enter the bootloader mode. Now we are ready to install custom recovery.

1. Now you need to download the TWRP Recovery File. We find our device and go to the section "Download links" and choose "Primary (Recommended)".

1. The whole essence of the installation comes down to entering the FastBoot Flash Recovery TWRP.IMG command. It is worth noting the following: you downloaded the firmware file should be called twrp.img or recovery.img, depending on the ADB version. You can find out where you download the appropriate programs or read the readme file, or just try both options.

On this, strictly speaking, everything, the installation of TWRP on Xiaomi Redmi Note 3 Pro (in our case) is completed. However, it is not worth a hurry: you need to start the smartphone in TWRP, for which you climb the power and volume keys down. The power button is kept to the vibration block, then let go and wait when the installed utility starts.

From here you can already boot into the system or start installing custom firmware. All the ways described on the Internet are the first and second variations described here, especially, there is usually no description of how to go to TWRP, so there is no sense to describe their expression.

Possible problems

And the problem is actually only one: after the firmware, if the caste is put on top of MIUI 8 version and newer, many users intensively googled the phrase "how to go to TWRP Recovery Xiaomi", because the possibility of normal entry is simply disappeared. This happened due to the conflict of the utility and firmware code: the file is emmc_appsboot.mbn, corresponding to MIUI, whose overwriting is simply not allowed to enter the TWRP.

The solution is quite simple: you can simply reinstall the recovery. Only there is one trouble: will help such an action at exactly one flashing, because of which the guys with wage 4pda found more reasonable and durable fix.

So, to correct the bug you need to download this file (fits only on Redmi 3, use the risk and risk to your own), turn off the phone, clamp the power and volume buttons down, connect the USB cable to the phone and computer, start the file "1 Run Me.Bat "From the archive, which, if successful, should write" Okay. FINISHED. " After that, disconnect the cable and 15 seconds, keep both the volume and power buttons, wait for the vibration. On this, TWRP after such manipulations should work perfectly.

conclusions

The TEAM WIN project is set only if it is really necessary. To ruin the phone is extremely difficult for such a thing, but you can. By the way, without standard mention that all manipulations with their devices you spend on your own risk and the risk will not be able to do. I hope we managed to convey to you information about Team Win Recovery Project and how to install it. The method, by the way, is relevant for any models of Redmi and Mi, even for MI5 and MI5S.

Or something else to experiment with the Android system, then Custom TWRP Recovery is what you need. If you wonder how to install TWRP Recovery for Android, then this article is definitely for you.

The recovery environment of your phone is part of the software that you rarely see. It is used to install android updatesRecovery to factory settings, and also performs other tasks. Google recovery environment, installed by default, very simple, but third-party developers offer their solutions, such as Team Win Recovery Project (or TWRP) - allows you to backup copies, install custom firmware, get the right of superuser, as well as a lot more Useful. So if you want to change your smartphone, TWRP will need you. You can also read what custom recovery is on Android and why it is needed. Today we will tell you how to install TWRP Recovery for Android.

Step 1: Unlock your device and make sure compatibility

You must be sure that you have unlocked the boolder (BOOLOADER). So, if you have not done this yet, we recommend reading the article how to unlock the bootloader on the Android smartphone. When finished, back to the TWRP installation. If your phone's bootloader is not unlocked, then you will have to install TWRP in another way.

Also, make sure that the TWRP is available for your device and see the TWRP and XDA Developers website to be sure that no problems will not meet on the way. For example, Nexus 5X phones are encrypted by default, but when TWRP first came out for Nexus 5X, it did not support encrypted smartphones. Therefore, the Nexus 5X owners should have been either themselves to decode their smartphone to install TWRP or wait for the update, after which TWRP began to support encrypted smartphones. Make sure you have learned about all the "quirks" of your device before continuing.

Also create a backup of everything you want to save. This process will not delete your data from the smartphone, but creating a backup before changing the system is a good habit.

Step 1: Turning on USB debugging

Next, you need to enable multiple options on your phone. Go to the phone settings and select "About Phone". Scroll down to the "Assembly number" point and 7 times click on this item. A message should appear that you entered the developer mode.

Return to the main settings page, you must have a new item "for developers". Enable "OEM unlocking" if this option exists (if there is no, do not worry - this item is only on some phones).

Then turn on "USB debugging". Enter the password or PIN, if necessary.

As soon as you do, connect your phone with a computer. You will have a window on the phone with a question "Enable USB debugging?". Check in the "Always allow for this computer" field and click OK.

Step 2: Downloading TWRP for Your Smartphone

You need to go to the Teamwin website in the Device section. Find the model of your device and click on it to download TWRP.

On this page, it is usually written important information about the device you need to know. If you do not understand something, you can find more information on the XDA Developers forum.

Go to "Download Links" and download the TWRP image. Copy it to the folder where ADB is installed and rename the file in TWRP.IMG. It is necessary that the installation command can be written faster.

Step 3: Login Login

To install TWRP Recovery on Android, you must enter the bootloader mode. On all phones, this is done in different ways, you may be able to search for Google or Yandex to find out how it is done on your device. Many devices helps such a way: turn off the phone, press the power button and the volume key for 10 seconds, then release them.

You entered the bootloader mode if you see the image similar to the following:

The bootloader of your phone may look a little different (in HTC on a white background, for example), but usually contains approximately similar text.

Step 4: how to install TWRP Recovery. on android

Once you enter the bootloader mode, connect the phone to the computer using USB cable. Your phone must show that the device is connected. On your computer, open the folder to which you installed ADB and press SHIFT + right mouse button on an empty place and select "Open commands window". Then run the following command:
FastBoot Devices.
The command must return the serial number of your device, showing that it is recognized. If the serial number is not detected, then go back to the first step and make sure that everyone did right.

If your device was recognized, then it's time to install TWRP. Run the following command:
FastBoot Flash Recovery TWRP.IMG
If everything goes well, you will see a successful execution message on the command line:

Step 5: Download in TWRP Recovery Mode

Disconnect the phone from the computer and drives the volume shortcut key, go to the "Recovery". Press the volume button or the power button (depending on your phone) to select it. Your phone will boot in TWRP.

If TWRP requests a password, then enter the password or PIN code you use to unlock the phone. It is necessary to access memory.

TWRP can also ask if you want to use it in "Read ONLY" mode. This mode means that all changes are deleted after rebooting. If you are not sure, then click on "Keep Read ONLY". You can always repeat step 3 and 4 of this manual to reinstall TWRP when it takes.

When you finish, you will see the TWRP main screen. You can use it to create a backup "Nandroid", restore the previous backup, install a custom firmware and still much useful.

Now the most important thing is to make a backup of your phone before making any changes.

Click on the "Backup" button in the TWRP main menu. Select "BOOT", "SYSTEM", "DATA" and spend the slider at the bottom of the screen. You can also change the name of the backup by clicking on it.

Wait while the backup is created. When the process is over, return to the backup menu. Remove the checkboxes from all options and scroll down. If you have a special section after "Recovery", such as WiMAX, PDS, or EFS, then mark them and make another backup. This section usually contains your EFS or IMEI information that is very important. If someday this information is damaged, then you will not work data transfer, and with a backup you can restore everything.

And the last if TWRP will ask if you want to get the superuser rights and install SuperSU, click "Do Not Install". It is better to establish the latest version of this application yourself than the one that TWRP offers.

After you have made a backup, you can start exploring TWRP, receive superuser rights, install custom firmware, or download Android OS. Remember: Backup before making any changes to TWRP, it will help you to restore the phone, if something goes wrong.

Experienced users are often wondering how to install recovery on android. Recovery mode allows you to perform several additional operations on the smartphone.

There are methods that can be used to firmware custom recovery. These include Rom Manager for ClockworkMod, GoManager for TWRP, FastBoot for devices with unlocked loaders and Flash Image for cases when other methods do not work.

Which installation method is better to choose

Most smartphones are compatible with multiple recovery modes, but the most popular ones are CLOCKWORKMOD Recovery (CWM) and Teamwin Recovery Project (TWRP). In addition to Rom Manager and Goomanager applications, which have been created specifically for these recovery methods, other programs should also work if they are compatible with the gadget.

There are 3 standard ways to install recovery:

• Rom Manager or Goomanager;
• FastBoot;
• Flash image.

Methods associated with ROM Manager and Goomanager are the most simple to install ClockworkMod or TWRP. However, these methods require access to root. If you want to install any user recovery using the command line, the FastBoot method is suitable. The main advantage of this method can be considered the fact that it does not even require routine. It should be borne in mind that the loader must be unlocked for this method.

Flash method Image also allows you to replace the Stock Removeri and install any custom mode Recovery. This requires access to the root, the application for emulating the command line and the binary Flash_image file. It will save from the hassle related to the use of a computer for manual installation of the recovery using FastBoot.

For FastBoot and Flash Image methods, a special image of recovery will be required. The latest version of CLOCKWORKMOD and TWRP for a specific gadget can be downloaded from the developer web pages of these applications.

In some cases, alternative installation methods may be needed, for example, if there is no separate partition on the smartphone for the recovery mode, since it is built into boot section kernel. For this category, many Sony and Samsung Galaxy devices are falling. They need a core firmware that includes recovery using ODIN or Flashtool.

An alternative way will be needed in the event that the device was originally intended for the Android system. In this case, the Special Installation Method of CLOCKWORKMOD is required. As examples, you can cite HTC HD2 and HP TouchPad. There is no universal manual covering all ways to install the recovery mode, but the standard methods given in this manual must work for most smartphones. Nevertheless, some models of phones may require a specific approach, and in this case will need to contact search engine Google to find with its help instructions for specific devices.

Installing CWM Recovery.

Now you can go directly to the standard methods for installing a custom recovery mode. Such operations should be carried out with caution. If during the installation process the device will be damaged or completely fails, then its owner may refuse warranty repair or replacement, since users do not have the right to engage in similar manipulations.

Those who are interested in how to install ClockworkMod Recovery, it is worth considering that this is the easiest and most affordable method that allows you to start the installation with graphic interface During the device loading. In this case, you do not need to download the image of recovery and enter any commands. This is the most convenient method for most users. Other ways can only be delivered if CWM has not worked. To install CWM Recovery, you must perform the following steps:

1. Install Rom Manager on your smartphone. This is an application that allows you to schedule recovery operations during Android boot and has the option to install the latest version of ClockWorkMod Recovery.
2. Start just installed ROM Manager. The first option that the program will offer must be called Flash ClockworkMod Recovery. You must click on it and follow the instructions.
3. We must wait until the system restarts and the latest version of the program will be installed. You should not restart manually.
4. After rebooting the system and start the operating system, you need to make sure that ROM Manager, which is installed by the latest version of CWM Recovery. All available updates must be installed. In case of appearance new version It is necessary to install it by following the instructions.

other methods

Install the TWRP recovery with GoManager:

1. Install GoManager on a gadget. This application allows you to install firmware and mods posted on the official website of Goo, as well as the latest version of TWRP TOUCH RECOVERY.
2. Run GoManager as soon as it will be ready.
3. Enter the menu and select Install OpenRecoveryScript. A positive answer all the questions in the dialog boxes and provide the application to the root.
4. Wait until the program will download last update TWRP for the device and install it.
5. After installing Recovery, you must make sure that the process has passed successfully. To do this, be booting through the recovery mode. This can be done using GoManager by pressing Menu and choosing the Reboot Recovery option.

And one more way to install custom recovery. You will need to download the latest recovery image that is suitable for the device, from the ClockWorkMod Recovery or TWRP download page.

It is very important that this file is compatible with the devices of a specific brand. For example, if you are using a DIGMA device, you need to make sure that it is supported. Otherwise, the firmware may not work and make a device unsuitable for use.

To install any user recovery mode with a quick bootloader, there must be ADB and FastBoot on the computer. After the installation is completed, you will need to perform the following actions:

1. Copy the recovery image at any convenient place on your computer (it is desirable that the path to the file is not too long). You can place it in the root directory of the C disk and do not create a special folder. The restoration image should have expansion img. If it is inside the ZIP archive, then it should be unpaid it.
2. Connect the Android device to personal computer via USB.
3. Wait for the appearance on the FastBoot USB screen.
4. Start the command line and enter FastBoot Flash Recovery C: \\ Recovery.img. It should be borne in mind that the path to the file has this kind, since the image is located in the root folder of the C disc. If the image is in another place, you need to specify the corresponding path.
5. Wait for the completion of the process, after which to restart the device.

If everything was done correctly, the modified recovery mode must earn.

AndroidKak.ru.

How to install recovery on android

Today, custom recovery, that is, the restoration environment for android devices, offers much more opportunities than the built-in software. Therefore, below we consider step-by-step installation using the example of the popular TWRP (Team Win Recovery Project).

How to install recovery on android - preparation for the firmware process

It is important to know that (in some cases, for example, when the power is turned off, disconnecting, disconnected from the wire), the installation of custom recovery can be reduced to a decrease in device performance, errors, failures and other dysfunctions. At the same time, the device loses the remaining warranty period, so all manipulations should be made extremely carefully, on its own risk. By default, it is assumed that the bootloader is already unlocked on the smartphone or tablet, and Android SDK Platform Tools is installed. If the device satisfies the conditions described, we do the following:

• I download the appropriate version of the recovery for android, which corresponds to the model of our smartphone \\ tablet.
• Save the file to the Platform-Tools C folder android SDK (you can choose any other place, but it will be easier to specify the path to further commands).
• Turn on USB debugging.

Installing third-party recovery on android

Now you can start downloading the software package with a custom recovery medium. This procedure implies the use of operating windows systems (version is not fundamentally important):

• switched to "FastBoot" mode: For some devices there may be another sequence of pressing buttons, but basically you need to press and hold "- sound" and the power button before the menu appears;
• by the next action, we connect the device to the USB to the PC, previously convinced the presence of a sufficient amount of charge on the first device;
• through the computer we go to the SDK Platform-Tools folder;
• we click SHIFT and make the right mouse button on an empty place at the same time;
• select the "Open command window" item;
• we enter the FastBoot Flash Recovery Recovery.img command, send to executing the ENTER button (Explanation: on site recovery.img should be the path to the same file; if it is posted in the Tools folder, we enter the name "as is");
• after a successful end notification appears, the device can be turned off.

When the TWRP installation is completed, the smartphone screen will still be a FastBoot menu. To test just the resulting caste:

• choosing an item " Recovery Mode.", Moving on the list of volume buttons and confirming the actions by pressing on the nutrition;
• after the initial login, select the language and mode of operation - read-only or "resolve changes";
• if you choose the first option, the custom recovery will disappear after another reboot;
• the selection of the second will leave TWRP on the system section;
• you can also mark the point "no longer show it when loading."

The main caste firmware menu will allow you to flash zip files, set third-party firmware, back up or restore files from the backup, to reset to factory settings with full data destruction.

Sovetclub.ru.

CWM Recovery Android - Installing Custom Recovery

Since the theme of Android firmware devices is very relevant, I decided to write about the installation of CWM Recovery on Android smartphone or tablet. There are several ways to do this at once how to do this: For some, all actions are performed on the device itself, but for this you need root rights, and for others, a computer is used when installing a custom recovery. What will seem easier for you or more convenient to use.

Method 1. Installing CWM Recovery via Rom Manager

The first method of the Recovery firmware is the use of the Rom Manager program, which we have already told in the article: how to flash android. This application has a separate item that allows you to set clockworkmod recovery in a couple of minutes.

Immediately I want to note that ROOT rights are required for the work of ROM MANAGER. How to get them can be read here and here.

After that, go to the official page https://clockworkmod.com/rommanager and see if your device is in the list supported.

1. Now open the ROM Manager and select the first item "Recovery Setup".

2. In the next window in the "Install or Update Recovery" section, select CLOCKWORKMOD RECOVERY.

4. At the bottom, click on "Install CLOCKWORKMOD".

5. The boot process will begin. With a good internet connection, it lasts a couple of seconds.

6. At the end of the download, a request will be prompted to provide root access to the application. Select "Provide".

7. That's all! You will see a notification "SuccessFully Flashd ClockworkMod Recovery!". Just click "OK".

So simply, the CWM recovery firmware through the Rom Manager. Now you can open it and find new items in it, which was not standard.

Method 2. Install custom recovery on Android with the FastBoot utility

All the actions described below are similar to the installation of TWRP Recovery: Go to the article.

Now we use the classic way to install custom Recovery through the FastBoot utility for Windows. It enters the Android SDK, the archive of which must be downloaded from the official site http://developer.android.com/sdk/index.html (go to the bottom of the page and download "Tools_-Windows.zip"). We will also need Java and drivers (learn more →).

Unzip the folder to disk "C:" - inside will be "Tools", and in it the "Android" file. Run it.

Select Android SDK Platform-Tools and click "Install Package".

Mark the "Accept License" item and then click "Install.

Upon completion of the installation in the "Tools_-Windows" folder, "Platform-Tools" will appear, and it has "fastboot" and "adb". They will fit us on.

UPD: The Platform-Tools folder on my computer is in another directory than you. The fact is that this article was written even when an Installer existed for Android SDK. Starting from the 25th version, the installation is carried out only with the ZIP archive: due to this, the part of the instructions had to be edited. Therefore, the path to ADB and FastBoot differs from my, everything else remains unchanged.

If you have a device Sony, HTC, Nexus, Huawei or LG (some models), then bootloader is blocked. How to unlock it told on our website:

• For HTC: Method 1, method 2
• For Nexus: Instruction
• For Sony: Instruction

Let's start firmware Recovery.:

1. First of all, go to this page and download the version of the "recovery-clockwork.img" file for your device. Note that for most devices there is both sensory and classical version. Download the one you like best.

2. Now place the file with CWM recovery in the Platform-Tools folder. I also renamed it to "recovery.img" (then you will understand why). I recommend that you do also.

3. Connect your tablet or smartphone to a computer using USB.

In this case, the device must be downloaded to FastBoot mode. Usually for this, on the device off, you need to hold the keyboard key: turning on + volume down. But this combination may differ depending on the manufacturer of the device.

UPD: It is much easier to go to FastBoot mode as follows: Turn on the USB debug on the device, go to the command line (in paragraph 4, just below how to get into it) and enter the command sequentially, while after each press "ENTER".

cD Path to "Platform-Tools"

adB Reboot Bootloader.

I got like this:

Your path will look different. If you acted exactly according to the instructions, it will be released (in any case, see the path in the appropriate conductor line):

cD \\ Tools_R25.2.3-Windows \\ Platform-Tools

In the screenshot you can see how I entered the same commands. As a result, the device will boot into fastBoot Mode..

4. Now open the command line (or skip this item and continue to work with it if you just translated Android to FastBoot Mode through it). The easiest way to get like this: Press the key combination "Win" + "R" and enter:

After that, click "OK".

5. You will fall into the command line.

6. Now you need to specify the path to the folder with the firmware. Enter the following command to go to folder back.

Press "ENTER".

7. My path to the folder with the recovery is: "C: \\ Program Files (x86) \\ Android \\ Android-SDK \\ Platform-Tools". Therefore, I enter (you prescribe your own):

cD Program Files (x86) \\ Android \\ Android-SDK \\ Platform-Tools

And again press "ENTER".

8. It remains to enter:

fastBoot Flash Recovery Recovery.img

"Recovery.img" is the name of the file being styled. Remember I advised you to rename the file from the recovery? We did it for convenience, so as not to enter something on the like "Recovery-Clockwork-6.0.4.7-flo.img".

After entering this command, click "ENTER" again.

9. As a result, we get the following message.

Congratulations! You have successfully installed custom recovery (CWM) with fastBoot utilities!

Method 3. We flash the recovery through the Rashr application

This method is also incredibly simple and convenient, but requires the root of rights. Their receipt is written at the beginning of the article in "Method 1".

1. Install the Rashr application - Flash Tool with Google Play, open it and provide root rights.

2. In the Options list, select "CWM Recovery".

3. Then the program will give a list of available recovery for your device. In my case, Rashr showed 2 options: ClockworkMod with support for the press on the screen and the classic option (control is performed by the volume and power button).

4. When you see a download request, click "YES".

5. Then the downloading of CWM Recovery will start for your Android smartphone or tablet.

6. At the end, a notification will appear that the firmware has been successful and now you have installed modified recovery. You can reboot to it and try it out. To do this, click "YES".

Perhaps this method of installation can be called the easiest. The only thing for him is needed is the presence of the root of rights.

Method 4. Installing Recovery on Samsung in Odin

If you have a Samsung device, you can install CLOCKWORKMOD Recovery on Android with the help of the ODIN branded utility. Here I will briefly tell you what to do. I recommend reading our article: how to flash Android tablet, smartphone Samsung.. In it detailed information about the use of ODIN.

1. Find and download Recovery for your phone or sAMSUNG tablet.

2. Connect the device to the USB PC and transfer it to in solid loading. How to do this is written in the full article on the link above.

3. Open ODIN and click on "AP" (in some ODIN versions, this field is called "PDA").

4. Press the "START" button and wait for the firmware.

That's all! I hope that this article was useful for you! If you have any questions, leave them in the comments.

4IDROID.com.

TWRP Recovery How to install? TWRP Recovery download for android

Hello everyone! In this article we will talk about TWRP Recovery. Let's start with the advantages of perhaps the main opponent, this ClockworkMod further consider the purpose and functionality of this utility. Then we will give an extended description of all menu items. And of course we will analyze where to download and install TWRP Recovery. And at the end of the bonus will be described the process of firmware android smartphone with this utility.

Before you begin to read the TWRP Recovery instructions, I want to note that most of the users prefer to enjoy these recovery due to the fact that, but compared to ClockworkMod has the following advantages:

• More convenient touch interface
• The function of setting some options.
• Transparent method choosing what we want to include in a backup
• Support package installation zip files
• Screen lock by pressing the power button
• S-PEN support on Galaxy Note Tablets and Phones

TWRP Recovery is much more powerful, compared to the factory, utility (menu) of the system recovery, which allows you to make full backup copies of the entire device system, install on it software, firmware, kernel and much more, which usually does not allow you to make the factory recovery TWRP, is installed in a special system section internal memory Tablet or phone, in place of the factory recovery.twrp recovery can help you out in some, it would seem hopeless situations. Even if your tablet or phone stopped downloading, in many cases using TWRP you can restore the system from the backup, with all its settings and applications.

Here is an exemplary list of what you can do with TWRP Recovery:

• Install custom firmware and informal cores
• Install factory system updates, additions and corrections
• Connect to a computer via USB, in a removable drive mode
• Create a full backup of the current firmware and its individual parts (system, settings, applications)
• Restore the device from the previously created backup
• Make a reset to the factory settings (Wipe - Data / Factory Reset), clean the cache (Wipe Cache), clean the Dalvik-cache (Wipe Dalvik-Cache), clean the battery statistics (Wipe Battery Stats)
• Create sections on a memory card and format them
• Execute terminal commands
• Work with files on your device

For a variety of smartphones and tablets, installing TWRP Recovery - a fairly simple procedure is enough to install from the market such a program as GoManager and select the "Install OpenRecovery Script" item:

For many devices, such as tablets and Nexus smartphones exist separate utilities similar to Google Nexus 7 Toolkit. Also, TWRP Recovery can be installed using the ADB program.

You can download the tablet or the phone in TWRP Recovery in several ways.

1. Using a special program, such as GoManager by selecting "Reboot Recovery" in its menu - "Load Recovery Mode".

2. Using Pressing specified combination keys when you turn on the device. This combination depends on the device model. On many devices in the recovery, you can get by clicking when they are turned on simultaneously the volume and power reduction button.

3. With help adB programs. If you configured connection to a computer using the ADB program, download your tablet in Recovery using the command: ADB Reboot Recovery

• By downloading your tablet or phone in TWRP Recovery, you first will see its main menu
• Thanks to the recovery touch interface, it is very easy to select the desired options to move on its items - just click on a certain finger element.
• In all the submenu, you can return to the previous menu by clicking on the return button located in the bottom (smartphone) or the top right (tablet) of the screen.
• At the top of the screen you see the battery charge percentage and current time.

Purpose of the items of the main menu:

1. Install - Installing firmware and additions

• This is one of the most commonly used TWRP Recovery items.
• With it, you can install both official and unofficial (custom) firmware, set the kernels, themes and other software that should be in the zip file placed on the built-in memory of your device.
• After selecting the file, you fall into the following menu where you can select the addition of the next file to the firmware queue (the Add More ZIPS button) or start the firmware of the selected file using the slider located at the bottom of the screen.
• Using the ZIP Signature Verifications option, the zip file signature check mode is activated.
• Using the Force MD5 Check On All Zips option, you can enable MD5 checksum checks for all zip files installed.

2. WIPE - Cleaning and reset to factory settings

• Using this option, you can clear such sections as cache (cache), Dalvilk Cache, System, and make a reset to factory settings - Factory Reset, after which your phone or tablet returns to the state in which it was sold in the store.
• You can also clear an external memory card - External Storage and internal memory - Internal Storage, clean system folder Android_secure and make cleaning battery use statistics - Wipe Battery Stats.
• As in the other menu items, you will need to confirm the start of this or that operation using a slider that appears at the bottom of the screen. You can cancel the operation using the "Back" button.

3. Backup - Creating a backup system.

Another of the most important TWRP items. With it, you can make a full copy of the entire tablet system, along with data and applications available in its internal memory - the so-called Nandroid Backup.

Here you can:

• Select Sections to Save: System, Data, Boot, Recovery, Cache, Uboot, NVRAM
• Find out the amount of free space on the media: Free Space
• Enable Backup Compression: Enable Compression
• Disable file creation with backup checks: SKIP MD5 Generation During Backup
• Select a memory card for storing backups: Use External SD
• Select Internal Memory Device Storage Backups: Use Internal Storage
• Set the name of the backup file - Button Set Backup Name
• Pick out partition dimensions - Refresh Sizes Button

As usual, confirm your choice using a slider and TWRP will start the backup process:

After that, you can restart the tablet or phone - the Reboot System button, as well as go back or in the TWRP main menu using the appropriate buttons.

4. Restore - restoring the system from the previously made backup.

Here you can:

• Select a memory card to search for backups: Use External SD
• Select the internal memory device to search for backups: Use Internal Storage

Backup names consist of the date and time of their creation. You can sort files by:

• Ascending "Sort Ascending" named after, dates and size
• Descending "Sort Descending" name, dates and sizes

After selecting a backup, you will have the opportunity:

• Select Sections (System, Data, Boot, Recovery, Cache, Uboot, NVRAM) that you want to restore,
• Rename backup "Rename Backup"
• Delete backup "Delete Backup"
• Enable checksum checks MD5 backup files
• Start recovery can be confirmed using a slider.

5. Mount - Mounting individual sections, their formatting and mounting the device as a USB drive when connecting to a computer

Mounting, makes sections or folders available for use.

The items of this menu mean the following:

• Mount / Unmount System - Mounting or Unlocking System Section
• Mount / Unmount Data - Mounting or Unlocking Data SectionMount / Unmount Cache - Mounting or Unlocking Section with Cashem
• Mount / Unmoun SDCard - Mounting or Remounting Memory Card
• Mount / Unmoun Internal - Mounting or Unlocking Internal Memory

"Mount USB Storage" button - Connecting a tablet or phone to a computer in a removable drive mode

At the same time you can choose for mounting:

• Memory Card: Use External SD

6. SETTINGS - TWRP settings

Here you can set the default options that TWRP Recovery will use the default when creating and restoring backups, as well as when installing ZIP files:

• Zip File Signature Verification: Checking Signature ZIP File
• Force MD5 Check for All Zips: checking checks for all ZIP files
• Use RM -RF Instead of Formatting: Delete files instead of formatting when cleaning sections
• SKIP MD5 Generation During Backup: Disable the creation of checksums during backup
• Ignore Image Size Errors During Backup: Ignore file size errors during backup
• The "Time Zone" button is used to select your time zone.
• The "Restore Defaults" button is designed to reset the default settings.

7. Advanced - Additional TWRP functions

This menu consists of the following items:

• Copy Log to SD - Copying the log of the file to the memory card.
• FIX PERMISSIONS - Correct access to files and sections. This item is used to return to the factory state of access rights to system files and folders that may be changed in incorrect operation of some root applicationsWhat can lead to freezes and failures in the work of the tablet or phone.
• Partition SD Card - Creating sections on a memory card. This item is used to create / SD-EXT and / SWAP partitions on a memory card. The / SD-EXT section can be used by some firmware when the device's internal memory is lacking, for example, to extend the / DATA section. Section / SWAP is usually used to speed up the operation of the Android device.
• File Manager - File Manager. Here you can select the file and perform the following operations above it:
• Copy - copy file
• Move - move the file
• CHMOD 755 - Set access rights 755 (like all system files)
• Chmod - set any other permissions
• Delete - Delete File
• Rename File - Rename File
• Terminal Command - Run in the selected directory the command of the terminal in the style of commands

Also in the Advanced section, other buttons can be placed, which can add a developer when assembling recovery from source code for a particular device.

Here you can choose the following:

• System - fully restart the tablet or phone
• Recovery - reboot recovery
• Power Off - Turn off the device.

• Everything alternative firmware, custom kernels, cracks, additions, decorations, application packages that can be installed on a tablet or telephone using TWRP Recovery- packed in the form of zip files.
• Before you either install on your device, do not forget to make a full backup of the current firmware so that you can later return your tablet or phone to the original state.
• Make sure that the battery of your device is charged at least 60 percent, and better completely, and disconnect it from the computer and the charger.
• The file you want to flash, copy the device into memory or on the memory card, is best in its root, without unpacking it. Make sure the file name consists of Latin letters and numbers and does not contain spaces and special characters.
• If you install a new firmware, be sure to complete with the help of the "WIPE" item

We proceed to the firmware:

1. Restart the device in TWRP Recovery

2. Select the "Install" item

3. Choose:

• Memory Card: Use External SD
• Internal memory: Use Internal Storage

4. Select zip file

5. Using the Force MD5 CHECK ON ALL ZIPS option, turn on the MD5 checksum check if you have the MD5 file bundled with your zip file.

6. We start the firmware by confirming the choice using the slider

You can also select up to 10 zip files that are installed at a time using the "Add More Zips" button or clear the list of previously selected files using Clear Zip Queue

www.mobileoc.ru.

Installing custom Recovery for Android

By default, all devices android is a recovery mode called recovery. With it, you can make the operating system rollback to standard settings, Install official additions and fixes. If you really want this to install third-party firmware, kernels and utilities on your device, then the factory recovery should be replaced with custom.

The most popular custom recovery for android are ClockworkMod Recovery. (CMD) and Teamwin Recovery (TWRP). The main difference of one program from the other is the presence of sensory management in the latter. As for the functional, the software offers approximately the same list of options:

1. Installation of informal patches, firmware;
2. Connecting a device to PC in ADB mode and instead of a removable drive;
3. Formatting, creating, combining partitions in the internal memory of the device;
4. Cleaning the program cache and battery report;
5. Creating spare copies of the system.

After examining the methods below, you can easily install custom recovery on Android. You need to get root-rights before working.

TWRP installation methods

You can install TWRP recovery by using a special software developer utility (TWRP Manager), third-party software designed to flash recovery, and Android Debug Bridge (ADB).

The first step will be downloading TWRP Manager from Play Market and install the application to the device. The utility must be opened to give rights to root access. Then:

1. in the menu that appears on the left, select "Install TWRP";
2. you will appear in front of you, where you need to select the device and the version of the recovery you want to install;
3. after selecting all settings, click "Install Recovery";
4. program B. automatic mode Racks recovery and install it;
5. if you want to install a specific version of Recovery, you need to save the recovery.img in advance, then you need to save recovery.img and select it through the "SELECT IMG File" item.

ADB as a way to flash recovery

This solution with reinstalling the recovery will suit for advanced PC users. To carry out manipulations, you will need a device with Android, a computer and a USB adapter. You will first need to install Android SDK with all packages along with Google USB Driver. Thereafter:

1. save on the Recovery.img computer supported by your smartphone version TWRP;
2. rename the recovery file in TWRP.IMG, save to the root memory of your device.

Connect the device to the computer using USB. Run the PC operating system command line (CMD in Windows). Push the following lines in it:

1. cD C: \\ Android-SDK-Windows \\ Platform-Tools \\ ADB;
2. sU DD if \u003d / sdcard / twrp.img of \u003d / dev / block / mmcblk0p34.

After that restart the device.

CMD installation methods

You can install CMD using ROM Manager, FastBoot mode or third-party utilities for the firmware of the recovery.

Install CMD using ROM Manager

1. Download Rom Manager from Play Market and install on your device. Do not forget to give her rights to root access.
2. After starting the program, a window will appear, including several subparagraphs. You will need to go to the "Recovery Setup" tab.
3. A new window will appear. Select CMD there. After that, you will need to choose a device model to which recovery will be installed.
4. After that, the next window will appear, where you must confirm your actions.

Installation CMD in FastBoot mode

To reflash the device with Android in this way, you will need to download Android SDK again, USB drivers for smartphone / tablet. Save the recovery file from the CMD website, rename it in update.img, save it in the Platform-Tools folder located in the Android SDK directory. Then activate the USB tab mode in your Android device.

Run the command prompt and enter the following commands:

If everything goes well, then the command prompts the appropriate notification.

Installing CMD and TWRP via Flashify

As we mentioned early, install custom recovery for android with third-party utilities. One of them is Flashify. A distinctive feature of the program is compatibility with many models of smartphones and tablets. You need to install software on the device and allow it to use root rights.

1. On the main screen of the running application, select "Recovery Image".
2. You have a window with a choice of a version of the recovery and the choice of the device model (if you did not download the program in advance).
3. After the desired version of the recovery is saved in the device's memory, click on "Yup!".
4. Flashify will install a program, automatically restart the device.

Any phone running Android has a built-in Recovery Recovery menu. You can go to it by clicking on the telephone turned off at the same time buttons and enhance the volume (on some device models other combinations are used). However, the standard menu usually has a not particularly rich functionality, allowing you to make only a backup and recovery of the system, reset to factory settings and another pair of operations. Due to such limitations, many users, especially advanced, look towards the so-called custom recovery, which have an extended set of functions and a much more enjoyable interface. One of the most popular modified recovery menu is TWRP Recovery (Team Win Recovery Project). On how to establish it, just talk in this article.

Installing TWRP via ADB and FastBoot

To begin with, we give the most common installation method - using the computer and the FastBoot console application. This method does not require, but the bootloader must be unlocked on the phone. The fact that it is and how to unlock on Huawei devices, you can read in.

So, we will count, bootloader unlocked, and you can proceed to the procedure itself. First need. After this is done, via USB cable and turn on USB debug on your mobile device ( Settings - For Developers - USB Debugging).

Next, run the command line and go to the location of the ADB files and FastBoot by entering the command. cD Path_K_Papka_S_Adb. (in our case cD C: \\ SDK-Tools-Windows-3859397 \\ Platform-Tools). Check out the command adB Devices. Visibility of a mobile device. If your phone is displayed in the console, it means everything is in order and you can move to the next step.

Now you need to download the file-image of TWRP Recovery specifically for your device. Go to page https://twrp.me/devices/ and choose your phone model in the list.

On the next page we find the "Download links" and click on the Primary link.

Save the file in the same folder where ADB and FastBoot are located (we have it C: \\ SDK-Tools-Windows-3859397 \\ Platform-Tools).

After downloading for convenience, rename the file to "TWRP.IMG".

If your gadget model is not on the TWRP.ME website, then the desired image of TWRP recovery should search for the XDA Developers forum ( https://forum.xda-developers.com/). Here you can learn about all the nuances concerning the specific brand of the mobile device.

Now everything is ready directly to install custom TWRP Recovery. She is produced by the team fastBoot Flash Recovery TWRP.IMGwhere TWRP.IMG. – file new recovery. If everything went successfully, the message appears as in the screenshot below.

Reload the phone as usual can be commanded by the command fastBoot Reboot.

The entrance to the TWRP Recovery recovery environment is carried out in the same way as the factory menu. Turn off the device, and then use the combination of the buttons on + increase the volume (or other combination, depending on the model and manufacturer). It looks TWRP recovery for Android about the same way as the picture below.

Using the official Official TWRP App Application

If you cannot install TWRP Recovery through a computer, or this method seemed too difficult to you, nothing prevents from using the official program from TWRP developers. True, in this case, the superuser is required. Download the application C, and then run it by providing when you first start root-right.

Confirm the transition to the TWRP official website from which you download the Recovery file.

After the download is downloaded, click on "Select a File to Flash .." and select the saved image of the img.

Click on the button "Flash to Recovery" to start installation.

With its successful completion, the message "Flash Completed SuccessFully!" Will appear.

Third-party programs for installing TWRP Recovery

Replace the standard Android recovery environment on a modified TWRP Recovery using a whole range of applications. Each of them only works if the presence of root-rights. We list the most popular programs.

TWRP Manager.

The sequence of actions in all applications is almost the same. First, the phone / tablet model is selected, and then the TWRP version of the recovery. After downloading the file, the custom menu is installed. To test the performance, the gadget is rebooted in recovery mode.

In conclusion, I would like to say that the installation of TWRP instead of a regular recovery associated with certain risks. To reduce them to a minimum installation file You must choose strictly according to the device model. If your gadget is not in the list, or you are not sure about the correctness of the IMG image selection, it is better to refuse to replace the recovery menu at all. Otherwise, you risk obtaining an inoperable device.

Almost every user of the modern gadget seeks to make your device a little better. If we consider solutions based on Android, it will not be approved that all owners of smartphones or tablets are missing in their devices. Someone productivity, someone autonomy. To provide many non-standard functions that are not provided by the device manufacturer, the user or group creates their own firmware. The first step on this path is to install a non-standard or "custom" recovery environment - recovery. Next, we will talk about how to install TWRP Recovery through a computer and with the help of other means.

What is custom recovery?

Any Android device, and basically it is smartphones or tablets, equipped with a manufacturer of pre-installed recovery medium, or in a different recovery. This software component makes it possible to reset the device to factory settings, provides tools for updating the firmware, and also solves some diagnostic tasks and settings.

To start the recovery, the special combination of keys on the device is most often used on the device turned off. In addition, the entry into the recovery environment is often possible using ADB commands from Android SDK.

Why TWRP.

It is necessary to state that manufacturers limit the possibilities of pre-installed recovery. Many experienced users wish to use the capabilities of hardware components as much as possible, and therefore there are so-called custom recovery, available for installation on a wide list of Android devices. Such a solution is quite seriously expanding the possibility of adding new features to the firmware and thin setting devices.

One of the most popular and functional solutions among custom recovery is Teamwin Recovery (abbreviated and generally used abbreviation - TWRP). Let us consider in detail how to install TWRP Recovery on various devices using different tools and means.

Risks

Before applying in practice knowledge of how to install TWRP Recovery, it is necessary to clearly realize all the risks associated with the installation procedure and the use of custom recovery. Theoretically, the use of a recovery environment other than the device provided by the manufacturer may result in loss of important data, as well as wrong work Devices and even hardware breakdown. It is important to remember the need to save the information contained in the device before installing TWRP Recovery on Android. In any case, each action described below, the user is performed at its own peril and risk.

Installation methods for various devices

To install TWRP usually use one of several methods:

• FlashTool - third-party software designed to update and "clean" firmware installation that can be used for refractoring recovery. To understand how to install TWRP Recovery via FlashTool, only the owners of devices created on the MTC platform follow. For devices running processors from other manufacturers, the program is useless.
• Installation using the ADB commands - AndroidDebugBridge (from Android SDK).
• TWRP Manager is a special utility released by Teamwin.

TWRP installation via Flash Tool

To carry out the procedure, we need the Flash Tool program, the TWRP file in format.img and renamed to TWRP.IMG, as well as a special scatter file. All of the above individually and differently for each model of the device. In order to find the desired version of the program and the individual files for each device, the easiest way to contact the profile forums in the "Android" topics.

After all the files are obtained, proceed to execute instructions, how to install TWRP Recovery via FlashTool:

1. Initially, you need to unpack the archives with the Flash Tool program, as well as, if necessary, with TWRP.IMG and the Scatter file in a separate folder on the S. disk
2. Next, the Flash_Tool.exe file is launched with administrator rights. If a warning appears that the Scatter file is not loaded, it is ignored and the "OK" button is pressed.
3. Open the main program window. First you need to download the scatter file. This is done using the Scatter-Loading button located in upper corner window. In the conductor window that opens, you need to specify the path to right file And choose it.
4. Before you continue, you need to make sure that the device is disabled from the PC. Next, daws are removed from all fields, except section Recovery., And in the Location section, the path to the TWRP.IM file is specified.
5. The next step is the transfer of the utility to the standby mode for connecting the device being flushed. To do this, use the "Download" button in the window flash programs Tool.
6. After clicking on the "download" button, a disabled device is connected to the USB port. In some cases, it may be necessary to "reproach" the battery.
7. The recovery firmware will start automatically and takes a very little time. The completion of the procedure signals the appearance of a small window containing a green circle. You can turn off the device from the PC.

TWRP installation using ADB

We'll figure it out how to install TWRP Recovery through a computer using ADB commands.

In general, the method is to send several special commands to the device through the command line and is suitable, probably more advanced users of PC and Android-devices.

In order for the question of how to install TWRP Recovery via ADB, it was decided successfully, you need to download in advance and, if necessary, unpack the archives, as well as set the following:

• Android SDK;
• Google USB Driver;
• tWRP file in format.img and renamed to TWRP.IMG (it must be copied to the device memory).

Initially, the device is connected to USB in the "Debugging via ADB" mode. The command line starts, and commands are introduced into turns:

• cD C: \\ Android-SDK-Windows \\ Platform-Tools \\ ADB -pressing the ENTER key;
• su -pressing the ENTER key;
• dd if \u003d / sdcard / twrp.img of \u003d / dev / block / mmcblk0p34 -and press the Enter key again.

After executing all the commands, the device is turned off from uSB ports And reboots.

Conclusion

Thus, deal with the question of how to install TWRP Recovery, maybe it may not even be too experienced owner of any "Android" -device. It is important only to first familiarize yourself with all possible consequences and, before proceeding to manipulations with the device, make sure that all the next steps weighed, respectable and true.

After everything turned out successfully, everyone can install new and different from TWRP Recovery original firmware, Get root rights, make backup copies of any partition of device memory and much more.