Tripod for phone at home. A tripod for a phone - what it is, what it looks like, why it is used, features of different types. phone tripod rating

A tripod for the phone is not a necessary thing, but sometimes it is extremely necessary when there is a need to shoot a video or photo, and at the same time it is not possible to hold the phone, since the hands are busy with the process.

It is not difficult to make it with your own hands, the main thing that is required from a homemade tripod is stability, the absence of shifts and accidental falls, the ability to control shooting, that is, the availability of buttons. Such a functional holder can be made from several improvised means.

From clothespins

This will require a ballpoint pen and 6 clothespins.

• Two clothespins are put on the center of the handle parallel to each other, in one direction.
• Further on two sides of them, close to the first pair, 2 more pieces of clothespins are attached at an angle of 90 degrees with respect to the first.
• The ends of the two extreme clothespins are grooves where the phone will be installed.
• The last step is to install the last two clothespins parallel to the first two, but in the opposite direction.

Thus, the stability of the structure is provided by the 1st and 3rd pair of clothespins, the 2nd pair serves as a stand for the phone.

Pros: ease of assembly and availability of materials

Cons: inability to set the desired angle of inclination

From a bottle

You will need a PET bottle and a stationery knife (scissors). The bottle must be cut off evenly at the top. The remaining lower part of the bottle should not be too high - the stability of the structure will ensure half the height of the bottle.

On opposite sides of the cut edges, 2 notches are cut with scissors, in which the width is equal to the thickness of the phone, and the depth is about half the width of the phone.

The phone is inserted into the resulting grooves with its narrow part. Everything, you can start shooting.

Pros: anyone can make such a tripod

Cons: the phone is fixed in only one position, it is impossible to change it

From a table lamp

Option 1

For this homemade tripod, a table lamp is suitable, the base of which is itself similar to it, that is, it has a reliable base, coverage and mobility. A table lamp with a large clothespin attached to the table would be ideal.

You will also need a quick-clamp clamp (a tool for tightly fixing parts), it is available in hardware stores, its cost does not exceed 100 rubles.

It is necessary to remove the cover from the table lamp (it is fastened with a screw), drill a hole in the clamp handle for the diameter of the screw and connect the clamp itself to the lamp with the same screw. Gently, without blocking the zone of control sensors, the phone is clamped with a clamp. You can use a soft material (napkin, pieces of cloth) to put it between the phone and the clamp to avoid mechanical damage.

A homemade tripod from a table lamp is ready.

Pros: functionality similar to a full-fledged tripod

Cons: you will need to purchase additional materials (clamp), work with a drill

Option 2

In the case of using a table lamp, this option is the simplest. You don't need to unscrew, remove, drill anything. All that is needed is stationery rubber bands, with which the phone is fixed to a hard ceiling.

Pros: ease and reliability of fastening

Cons: none

From cardboard

There are quite a number of factory-made cardboard tripods in various shapes, from complex to ingeniously simple. From any cardboard box, you can cut out a similar template yourself, fold it (glue) and use it. This will be the simplest holder, horizontal or vertical, depending on the design.

Pros: availability of material

Cons: the inability to change the shooting angle

A tripod for a phone from improvised means is a temporary thing and not always functional. If there is a need to use it often, it makes sense to purchase a full-fledged tool and take high-quality photos and videos.

A tripod is a special device that allows you to keep the device in one position. The most popular devices are designed for smartphones, video cameras and microscopes. This article will look at homemade tripods for the phone, microscope, camera, spotlight, and level.

How to make a tripod for a smartphone: option number 1 - from wire

In fact, any thing that can fix the device and hold it for the right time can serve as a tripod for the phone. This is necessary primarily for shooting video or photographing. How to make a homemade tripod?

For the first option, you need a regular cable. It needs to be strong enough, but flexible. Shape the cable so that it matches the shape of a regular phone tripod:

• 3 supports with which the stand remains flat;
• on top is a design for attaching a smartphone, which you need to make to fit your phone.

The design will look like the photo below.

The advantage of such a tripod is that it can be mounted on any pipe by bending the supports to fix the structure.

Option number 2 - from stationery clips

The second way to make a homemade tripod is from office paper clips. You will need 2 clips and some flat thing to attach them to. You need to clamp the paper clips on a flat surface at such a distance that you can set the phone on their handles. Everything, the tripod is ready and you can shoot on such a stand no worse than on a regular purchased one.

Option number 3 - from pencils or pens

Third idea: a homemade tripod made of pencils and rubber bands. You must first connect 3 pencils with rubber bands in the form of a triangle so that the lower one, which forms the base of the figure, protrudes. Next, you need to fix another pencil behind the others so that it plays the role of a support. The final design will look like the photo below.

The height and angle of inclination of such a stand can be adjusted by simply moving the rubber bands.

Option number 4 - from the box

Another way is to make a homemade tripod from a small box. This idea is the simplest, since for its implementation you only need a box and a knife. It is necessary to cut the structure so that the base remains intact, and the back forms a stand for the smartphone. This tripod is uncomplicated, but unfortunately the angle of the phone cannot be adjusted.

How to make a tripod for a camera: the first way

For camcorders, tripods are even more in demand than for smartphones. When shooting, you need a clear and static picture in order to make successful and unforgettable shots. Of course, you can buy a stand in the store, but the prices for such designs are not entirely low.

For a homemade tripod for the camera you will need:

1. 3 razors.
2. A small piece of board.
3. Durable adhesive.
4. Screw.
5. Sealing ring.
6. Drill.

First of all, a triangle with equal sides (5-7 cm) should be cut out of the board. In the middle of the figure, you should make a hole with a drill into which you will need to insert a screw. Now on each side of the wooden triangle you need to glue the razors with glue so that they act as tripod legs. A sealing ring must be screwed onto the screw so that the camera does not push the screw down. It remains only to fix the camera on the screw by screwing the screw into the corresponding hole on the device.

Such a stand looks very beautiful, and will also serve as an excellent attribute even for amateur video or photo shooting.

Second way

Surprisingly, you can build a homemade tripod from an ordinary bottle. For this you will need:

1. A bottle with a cap (preferably a large one).
2. Screw with a diameter of 0.5 centimeters.
3. Construction washers (2 pieces).

You need to make a hole in the bottle cap, and then insert the screw there. It is better to make a hole with a drill of a smaller diameter than a screw, so that it can be screwed in and fixed. The screw should be screwed in from the inside, having previously placed the washers inside the cover. Now the design is ready for mounting the camera on it. It must be screwed onto a screw that protrudes from the outside of the cover.

The bottle must be covered with sand or stones so that it does not tip over with the camera. Now you just need to screw the cover with the camera. Homemade tripod is ready.

Such a structure can be attached to a pole or to a tree using straps or elastic bands so that shooting is carried out from a higher place.

DIY microscope tripod

For a homemade tripod for a microscope you will need:

1. Pipe with a diameter of 25 mm or more for fixing to a table.
2. Two pipes with a diameter of 25 mm and a length of 20 cm.
3. Pipe with a diameter of 25 mm, length 15 cm.
4. Transitional corners with the desired diameter - 2 pieces.
5. Pipe fittings - 2 pieces.

It is necessary to decide where the main pipe will be fixed on the table, on which the remaining parts will be attached. You need to install it so that it is motionless. Now, at a distance of 5 cm from each other, you need to fix horizontally two pipes of 20 cm each using fasteners. Corners must be installed at the ends of these elements. Then attach another pipe 15 cm long. We get the base of the structure, which is tightly fixed on the table. You can set it to the desired position for work. Next, you need to install the microscope mount, which comes with the device, on the last pipe. The device itself is already attached to the stand for it. So that the structure does not stagger, in the middle of the last pipe you can make a stand from books or other objects.

Despite the complexity of this design, it is very convenient and practical to use due to the fact that it can be installed in any position.

How to make a tripod for a spotlight

To create a design you will need:

1. Bar (30 mm wide and 20 mm high).
2. Stick 4.8 meters long (durable).
3. 5 screws.
4. Construction washers - 12 pieces.
5. Bolts - 2 pieces.
6. Wing nuts - 7 pcs.

From the stick you need to separate 6 parts. It is necessary to make 3 legs 68.2 cm long; 1 piece 110 cm long; 1 piece 99.8 cm long. Now you need to cut a triangle out of the bar, into which the main stick will be placed. In this triangle, you also need to make a square for the size of the base of the stick, which is then placed in this part. Now you need to fasten the legs to the resulting triangle with the help of wing nuts on each side. Cut the ends of the legs diagonally. Next, one more 110 cm long must be screwed perpendicular to the main vertical stick so that the attachment point is 20 cm further from the middle of the stick. It remains only to fix the spotlight handle on a horizontal rod using the same wing nut. On this homemade tripod for the spotlight is ready.

This article introduced the basic tripods and described the process of their step-by-step production. As you can see, you can build a stand for almost any device: phone, video or camera, microscope, spotlight. You can also come up with a homemade tripod for the level and other devices that require a mandatory fixed position when using.

1. No need to place the tripod on uneven surfaces. Even if you managed to put the installation on a bump, it can fall at any time. The device will become unusable as a result of the impact.
2. Do not install on a tripod, especially homemade, devices that are too bulky, as they may damage the stand.
3. The horizontalness of the surface can be checked with a level. This will allow you to control the tilt and eliminate jagged footage when shooting video or taking photos.
4. You should always take a stand with you when shooting video, even if you don't think you'll need it at all. Perhaps a situation will arise when new ideas come to mind, and it turns out that a tripod is necessary in this case.
5. Do not use the fragile stand in extreme places (such as on rocks). If the structure falls, not only the tripod can be damaged, but also expensive equipment.

Smartphones are often used for mobile photography. In some cases, it is difficult to obtain high-quality images without a rigid fixation of the camera. A tripod for the phone expands the functionality of the device, allowing you to fix it in the desired position.

What is a phone tripod?

The smartphone stand came into everyday life from the photo and film segments. A tripod for a phone for shooting is a stand that provides reliable installation of the gadget at a specific point relative to the floor and other surface. The task of the support is to stabilize, adjust the camera height, change the angle of inclination. Models of various sizes, designs and types of mounting are telescopic, equipped with flexible legs or on a rigid base, with a holder at a certain height.

What does a phone tripod look like?

The device is a special mobile accessory on three legs. The tripod consists of a base and a head. A smartphone tripod can be compact, full-size or pocket-sized. The legs of the latch are fixed in a static position or are adjustable in height. They are equipped with rubberized tips for better grip of the device with different types of surfaces. Some models are equipped with a mechanism that turns them into a selfie stick.

Why do you need a tripod for your phone?

Recently, progress has taken smartphones to the highest level of use. Today, with their help, not only interaction between people takes place, but also high-quality photos and videos are obtained. With the help of a tripod, camera shake is completely eliminated, so high-quality images are obtained. The main advantage of a mobile phone tripod is that it can be placed on any plane, while the camera is directed directly at the object, and the hands remain free.

The device is a necessary accessory when performing delayed shooting and for blogging activities. Additionally, the range of applications for a tripod for the phone includes:

• watching video clips and reading books;
• communication in applications through video calls;
• work in programs that require only viewing content.

Types of tripods for the phone

Devices for mobile shooting are divided into several main groups:

1. Classic tripod for the phone is a reduced copy of the usual support for a SLR camera. It is advisable to use it for indoor work, installing it on the floor, table or cabinet.
2. Phone tripod with flexible legs has a small height. The gadget does not require a flat surface. It can be attached to a chair leg, fence or tree. The tripod is ideal for photo shoots, but has a minus - the lack of smoothness of movement in the frame.
3. Universal rack for the phone is equipped with an extended set of functions, connects to smartphones, camcorders, cameras and is able to cope with the most difficult shooting.

Classification of tripods for a smartphone depending on the type of head:

1. Pan Tilt– limited range of motion with turn and tilt. Functions are adjustable and locked to work individually.
2. pistol grip- A tripod for the phone helps to set the camera to the desired point without unscrewing the screws.
3. ball mechanism– any position in space, panoramic photos.

Floor stand for phone

An important accessory for those who often upload photos or videos of the process of working with their own hands. Also, this high phone tripod will be useful for food photographers to create photos in the now very popular flat lay style, because any shooting from above is too tough for him. Such a device is useful in large rooms, such as gyms, dance studios, where there is a minimum amount of furniture, and shooting must be done with your hands free. Legs give several variations in placement height.

Desktop tripod for phone

Eliminate the need to carry bulky accessories with a small tripod for your phone. The tripod stays confidently on its feet with a wide range of installation, fixing the camera in one position helps to take high-quality photos. In addition, some models are equipped with a swivel head, so that the fixed smartphone can be rotated in different directions. A desktop tripod for your phone is an indispensable thing for those who like to take group shots. Thanks to the leg collection function, the device easily transforms into a selfie stick.

Handheld phone tripod

A kind of stand, which, unlike its counterparts, has one point of support. An ideal assistant for those who like to take high-quality selfies. In order to use it, you need to insert a smartphone into a special form and install a communication program. In professional photography, a mini tripod for the phone is used when you need to quickly change the angle and location of the shot. To get high-quality shots, the photographer takes a pose in which his legs turn into missing tripod legs.

Depending on the method of shooting control, the manual stand for a smartphone is divided into the following types:

• monopod without buttons;
• with bluetooth button on the handle;
• with bluetooth remote control;
• monopod with wire and button.

Universal tripod for phone

Recently, hybrid variants of stands for smartphones are gaining great popularity. It is convenient when a tripod tripod for the phone easily turns into a compact tripod. In addition, the advantage of the accessory is its compactness, the folded size is similar to a traditional selfie stick. All this makes it the most popular among buyers who are fond of different types of photos and videos.

How to choose a tripod for your phone?

The accessory is purchased taking into account the ratio: quality-functionality-price, depending on the purpose and frequency of its use. When buying a tripod for your phone, you should consider the following parameters:

• height;
• weight and dimensions;
• fastener type;
• leg type;
• material;
• stability;
• head mobility;
• the presence of a remote control.

Tripod with light for phone

The device is necessary for those who shoot video and take photos in poorly lit rooms and at night. In this case, it is impossible to get a good image without an additional light source. A tripod for a phone with a lamp is indispensable when the power of a standard flash of a mobile device is not enough. As an additional light source, LED portable lamps are used, which are mounted behind the scenes around the smartphone.

Flexible phone tripod

Taking pictures with the whole family in the country or capturing a beautiful natural landscape - all this will allow you to take pictures with your phone. The undeniable advantage of the octopus tripod for the phone lies in the wide range of legs. Due to the flexibility of the supports, the smartphone on the stand can be mounted on any surface. If all three legs are bent towards you, you will get a selfie stick, bending at a large angle will turn the legs of the phone stand for shooting into a great handle. The flexible stance can be used as a panoramic arm rig.

Tripod for phone with remote control

The most advanced models of stands for creating photos and videos from your smartphone are equipped with various accessories. One of the most important is the remote control. A professional phone tripod with a small accessory helps you take pictures or direct video while away from the camera. This is especially true in situations where even minimal camera movement is unacceptable, and you need to take several photos at different times. The principle of operation is simple: the accessory is connected via Bluetooth to the phone, and its buttons imitate the keys of a smartphone.

phone tripod rating

Every self-respecting video blogger should have such a device in his arsenal, which helps not only to take high-quality photos, but also to shoot high-level master classes. Photo enthusiasts who do not want to spend money on specialists in the field of photography cannot do without it. Consider which model options can be attributed to the list of the best tripod for the phone.

The best classic tripods:

The best tripods with flexible legs:

The best universal tripods:

DIY phone tripod

High-quality stands are very expensive, so as not to overpay, it is useful to learn how to make a tripod for a phone from improvised means. To do this, you need to have the following tools:

• fastening from an old table lamp;
• wooden bars;
• PVC pipe;
• holder for your mobile phone.

The process of making a tripod for a phone consists of the following steps:

How to use a phone tripod?

Before you can enjoy simply shooting a photo or video, you need to know how to prepare the camera for this. A tripod for a smartphone is installed and configured, adhering to the following rules:

How to replace a tripod for a phone?

On the one hand, there are a lot of options, because only the camera should remain open, and the entire body can be closed as you like. A simple tree to which you can attach a smartphone can become a primitive tripod for a phone. However, if suddenly there is no such stand, you can use the following options:

Having made a tripod for the camera with your own hands, you can create a unique accessory for your camera.

With it, the picture of the resulting videos will be well stabilized and you will not have to spend a large amount, because the product can be created from improvised materials.

In the process of taking pictures or novice photographers often face the problem of a blurry frame.

Image stabilization does not depend on the shooting location, but on a good tripod that will hold the camera securely and prevent it from moving.

The best option for creating high-quality photos and videos is to use a tripod. Camera stands can be of several types:

• Tripods - the most stable structures with three supports that are installed on the floor or table;
• Monopods - standard stands with a magnetic or conventional base;
• Multipods;
• Stand-belt. Most often used for video filming;
• Rope tripods and other suspended structures.

We make a stable tripod with our own hands

The tripod is the most expensive type of tripod. On specialized sites, the price of a structure can reach up to 5-7 thousand rubles.

But is such a waste justified if the stand can be made independently?

To create your own tripod, you will need 2 rectangular tubes with rounded edges. Also, you should purchase 2 ski poles made of aluminum material.

To create a strong base, take a piece of chrome-plated steel pipe (about half a meter long). To connect all the elements, it is necessary to purchase self-tapping screws, screws, nuts with washers.

Of the repair tools you need:

• Standard drill with a drill;
• Hacksaw blade;
• File;
• Wrench;
• Regular screwdriver;
• Hammer, sandpaper;
• Two small wooden boards (squares 10x10 centimeters);
• Pliers.

Take three rectangular tubes and cut three small pieces from it as shown in the picture below. Make incisions and bend the "ears", creating brackets.

You should get three such details:

Fig. 3 - the resulting tripod elements (3 in total)

Take the ski shelves and sand them well with a few sheets of sandpaper. Make sure all paint is removed. Now cut both elements in half.

In the future, half of the polished stick will be the base of the tripod.

Fig. 4 - grinding parts

Take one of the wooden boards and make a round hole in it for installing the camera and mounting it.

The diameter of the hole must match the diameter of the previously ground tube:

Fig.5 - creating a hole

Now let's move on to creating the legs of the tripod. One of the brackets made in the first step will be used as a mount.

Mount the bracket on top of the tube as shown in the picture below and drill a screw hole so that you can adjust the tripod position with it.

Fig.6 - fixing one bracket

Install the chrome tube into the hole in the base. Then install three brackets into the base, each of which has a rectangular tube attached with screws.

You should get the following structure:

Fig. 7 - the finished base for the tripod

Now take the second board, which is identical in size to the first. Make another bracket and attach it like this:

Fig. 8 - creating the upper part of the tripod mount

Take a self-tapping screw and drill it into the base so that part of the part appears on its back.

The camera will be screwed to it, so carefully select the size of the self-tapping screw:

Fig. 9 - completion of the base

The result should be the following tripod design:

Fig. 10 - finished product

As you can see, a homemade tripod looks no different from a purchased one. Its main plus is that the base can be rotated, which allows you to set the desired angle of the picture.

If you take larger boards, you can create a structure that can withstand heavier cameras without problems.

By extending the part of the tripod, you can set the camera in both horizontal and vertical positions:

Rice. 11 - an example of using a homemade tripod

DIY: Cheap Tripod for Home Shooting

This tripod variant resembles a simple camera stand. You can use it to mount the camera on a table or other elevated flat surface.

As practice shows, such tripods make autofocus more accurate, because the gadget does not move at all during shooting.

To build a tripod at home, you will need a few inexpensive parts:

• Plastic soda bottle. We will use a standard 0.5 liter container. Note that the larger the volume of the bottle, the better the stability of the structure will be. The ideal option is to use a five-liter container;
• A bolt that fits the tripod socket on your camera;
• two washers standard size;
• Screw.

Fig.12 - preparation of materials

It is advisable to take a bottle with a wide neck, so you can achieve better stability, because the cap is the base of the tripod. It will have a camera on it.

You should get the following scheme:

Fig.13 - creating a base for a tripod

The resulting product should not stagger or unwind. You can use a tripod already in this state if the camera is light. He will hold up well.

If you need to lift the gadget above the surface, use the rest of the bottle.

With its help, you can make the future tripod heavier so that it does not overturn and hold the camera well.

A simple weighting option is water. Just put it in a bottle and screw on the cap. Attach a camera to the resulting product.

Also, you can pour a full bottle of sand - this will reduce the likelihood that if a possible fall, water will spill and damage the camera.

A homemade camera stand will look like this:

Fig. 14 - appearance of a homemade tripod

As you can see, the product turns out to be very practical and you will not spend a penny on it. Operating Tips:

• Large cameras should not be used with this tripod. Most likely, it will not hold a weighty gadget;
• Install the tripod only on flat surfaces, as it cannot be fixed, which may cause the camera to fall;
• Handle the bottle filled with water carefully so as not to spill liquid on the device.

Creating a magnetic tripod

Using the idea of ​​the previous instruction, you can create more than just a stable tripod.

By attaching a strong magnet to the base, you get a universal mount that can be installed on any surface.

Often such products are used in cars for shooting videos, because the magnet firmly holds the camcorder, preventing blurry pictures.

It is better to buy a magnet as thick as possible. The larger its dimension, the better the camera will be fixed on the surface. If necessary, the mount can be cut.

Rice. 15 - an example of a magnetic tripod for a camera and its attachment to a surface

A well-made product can secure the camera even in a vertical state.

Stable razor tripod

This option is perfect for beginner photographers who are not yet ready to spend large amounts of money on purchasing professional camera accessories.

The stand raises the camera 10-15 centimeters above the surface. Suitable for placing on a table, floor or other flat surface.

Rice. 16 - an example of a finished stand

To create a short tripod, you will need:

• Three razors;
• small board;
• Super glue;
• One screw, the length of which is 5 cm and the diameter is 0.5 cm;
• Screw;
• seal;
• Lacquer of any color;
• Drill.

On the board, cut out a small triangle, which will be the base. Make a round hole in its center. Screw the screw into the resulting hole.

Attach three looms to the sides of the triangle and paint the structure with colored varnish.

Place the sealing ring on the screw and screw in the nut. Attach the camera.

Fig.17 - an example of using the stand

rope tripod

This tripod option is perfect if you need to shoot outdoors, but there is no way or desire to carry heavy structures for mounting with you.

A rope tripod is an accessory that you can make yourself in less than 5 minutes.

Its peculiarity lies in the fact that you can put the stand in your pocket, and if necessary, fix it anywhere: on a tree branch, table, bench and other places.

The sturdy stand allows you to improve the quality of photos in the dark and twilight. Autofocus will start to work many times better, and you will get great pictures even with detailed viewing under magnification.

After following the instructions, you will receive a tripod like this:

Fig. 18 - a simple rope camera stand

You will need:

• 2-3 meters of good rope;
• Bolt with a hook, the thread of which has a ¼ pitch. This variety is suitable for most cameras, because the bolt is attached to the camera base in a special connector;
• The camera itself. For such a simple design, you should not take too heavy gadgets. A regular digital camera will do.

The necessary bolt can be purchased at any hardware store for less than 20 rubles. The rope will cost 150-200 rubles, depending on its diameter and strength.

Beautiful photographs are not only the skill of the person standing on the other side of the lens, but also the technical conditions, the quality of the equipment. No matter how good a smartphone or camera is, in some cases you need a stable tripod to get a good shot.

Such equipment has a rather high price, especially if purchased in professional stores. At home, it is easy to find how you can replace a tripod for your phone and camera.

How to make a tripod for the camera with your own hands

To make a simple tripod, prepare:

• 3 razors;
• a piece of board of small size;
• glue "Moment";
• 1 screw with a diameter of 0.5 cm, length 4-5 cm;
• screw;
• sealing ring;
• drill;
• black enamel.

Step-by-step instruction

1. Draw an isosceles triangle on the board. The sides should be 0.5 cm longer than the length of the blade.
2. Drill a hole in the center of the triangle.
3. Cut out the triangle, screw the screw into the hole.
4. Paint the workpiece black.
5. Glue on the sides of the machines.

How to mount a camera on a homemade tripod

To fix the equipment on a homemade tripod, you need to put a sealing ring on the screw, tighten the nut. The field of this fix the camera on a tripod.

If there is no time to make such a device, you can use a desktop vise or experiment with other tools.

phone tripod

You can also replace a professional device with a homemade tripod. Even a wire is suitable as a stand. You can use binders to create stable structures for smartphones.

At home, it will not be difficult to find how to replace a tripod for a phone or camera. Use available tools, find new solutions, creating beautiful shots.