For a very long time, files are copied to the USB flash drive. Accelerate the operation of a slow flash drive. How to speed up the data record on the USB flash drive software

To do this, you need to move files, copy and delete on different sections of two hard drives.

Windows 7 installed 2 years ago, the second OS after XP, but it used it a little. From about six months, it began to use actively and now I noticed this glitch.

In short, the files are incredibly copied and the files are deleted. Removed 2 GB of photos and it took hours 2. It's just unrealistic long. What is it connected with?

It turned out, on Windows 7 is a common phenomenon. Copy speed is actually less than 3-5 times than in XP. It turns out that it is specifically done in the settings of the wines 7 by default. Why is it done? Unclear. As always, only in words of developers, everything is fine, but in practice ...

I had to google. It turned out that a bunch of time to copy and delete due to calculations, which occur as a result of the operation of the built-in function, the task of which is to continuously compare the minimum amount of information of a particular file with it, but already transmitted.

They assure that this is done to speed up copying. Hmm, good "acceleration", say nothing.

Here, the optimizers of Khrenovy. Take this gates and muzzle on asphalt. Instead of going forward and improve the system, they all complicate and Windows 7 runs worse than XP in some cases.

Fortunately, all this garbage is treated. And it is treated quite simply, if you know what and where to configure. You need to click on the "Start" button at the bottom of the left, and then click "Control Panel". There will be no problems. Next, we do as on the screenshots.

Clean the Galka

Click "Programs", then "Programs and Components", then "Enabling and Disable Windows Components". Screenshots indicate where to press. After the window appears, in which you need to scroll down and remove the checkbox from the "Remote Different Compression" item. Click OK. And we wait until the changes will occur.

After that, everything was much chewer. Feels, as well as on XP.

At Win XP, such nonsense did not notice: everything is copied and removed quickly. Nasta never put, so I do not know, but most likely, if there is the same problem, it will be treated as on 7.

By the way, in the window where you can experiment with the item "Remote Different Compression", you can experiment and try to remove ticks from some other services, suddenly will benefit.

S.'s problem slow copying files We decided, but Windows 7 is full of riddles. For example, I am still unable to configure the work of headphones from the front panel of the system unit, which is done on XP once or two. On XP I enter the PC to sleep for the night. On the 7th, so that I did, it does not work. All manipulations with the mode of hibernation, etc. Do not bring success. Recently had to solve the problem with.

Having created a hemorrhoid, a non-attormative system of settings in Win 7, the microsoft has fallen themselves, because, except Windows, there are other solutions and people have a choice. And people, by a strange coincidence, love clear and easy to manage things. There is something to think about the guys from the microsoft.

Three operating systems on a computer, maybe or not? .

Do you know the situation when copying files from removable media (flash drive, remote hard disk) takes a very long time?
Let's try to figure out what could be the reason why the files are copied and can somehow speed up this process.

1. First of all, the copy speed depends directly from the flash drive. What do we usually pay attention to when it is selected? Volume, price, manufacturer, appearance. So, flash drives have another important characteristic - the speed of reading data. Usually, more speed devices have a higher price.
Focus on the price is not always correct, and for us a reliable way to make the desired choice - testing the flash drive.
You can check the transmission speed by CrystalDiskmark:

CRISTALDISKMARK - the result of the program

(Figure Read - read speed in megabytes per second, Write - recording speed.)

- choose language;
- indicate the number of runs;
- file size;
- And the desired disk.
After some time, the program will show the average recording and reading speed.

2. Characteristics of USB ports. To date, the following types of USB connections are known:
- USB 1.0 - have low bandwidth and are found at very old PCs,
- USB 1.1 - the connector is found on computers and laptops released to the middle of the two thousand years,
- USB 2.0 is the most common standard that allows you to implement, according to manufacturers, data transmission at speeds up to 480 Mbps. In fact, the copy speed is much lower than the stated.
- USB 3.0 - high-speed connector (up to 5 Gb / s), which is not yet sufficiently distributed and occurs on computers collected later than 2010.

3. Computer resources have an important value. Perhaps the slow copy speed is caused by the old "hardware", namely the insufficient volume of RAM or low-speed hard disk. In this case, you can advise one thing - the computer needs upgrades. In the meantime, new things are not purchased, you can try to speed up copying using the FastCopy program. This program is free and has many supporters and opponents. But I have repeatedly convinced that large volume files are copied with Fastcopy much faster.

FastCopy - turn on copy acceleration

4. Also on the copy speed can affect the mounted drivers for USB 2.0 or the BIOS settings. You can check the settings as follows: in the BIOS select USB 2.0 Controller - Enabled. Then, in the USB 2.0 Controller Mode menu that appears, set the value Full (HI) SPEED.
5. Another possible reason is the size of copied files. One big file will be copied much faster than the folder of the same size with a bunch of small files. In this case, archiving will help: With any archiver we pack into one archive without compression, our files and then copy them.

How to solve a problem with slow copying data on a USB flash drive?

Consider the common causes of this problem and talk about how to solve it.

1. Flashley performance

If everything is in order with the computer, the culprit of the slow process of transferring files to the USB flash drive, respectively, is the latter. Budgetary flash drives, as a rule, can not boast of impressive speed recording speed. And the speed of 5-7 MB / s with the USB 2.0 connection interface for those may be common. You can test the flash drive data recording speed using Windows-programs for testing hard disk speeds, in particular, by means of the popular CrystalDiskMark utility. More at the speed that the tests of the flash drive show, you should not expect from it in practice.

2. Computer USB ports

Acquired on a faster data recording USB 3.0 flash drive will work in the same way as USB 2.0 flash drive, if only this interface is supported by a computer, and USB 3.0 is not. The USB flash drive will limit the speed of the port. In order to obtain the USB 3.0 interface performance when copying data, the USB ports of the computer must be equipped with them. The same concerns the situation when the USB 3.0 or 2.0 drive is connected to the USB port 1.0. The flash drive is connected to a low-speed USB 1.0 port, Windows, as a rule, immediately informs the system notice: they say, this device can work faster if it connects to the USB 2.0 port.

If the data is slowly copied to a flash drive, which is connected to the USB port on the front panel of the PC housing, it is possible to test its speed in connecting to the USB ports of the motherboard from the back of the case. It may be that the USB 2.0 or 1.0 ports are displayed on the front panel of the housing panel, while the ports of the motherboard provide USB 3.0 or 2.0 interfaces.

Like USB ports that limit your capabilities of data recording, to cut the copying speed of files can USB extension cords. If the USB extension supplies USB 2.0 interface, it will limit the speed of the USB 3.0 interface and USB ports of the computer with its limit bandwidth.

3. Weak computer stuffing

On old or budget models of computers, a slow data record on a flash drive can be due to a weak hardware stuffing, in particular, a small amount of RAM or a slow hard disk. In this case, only a computer upgrade will help.

4. Drivers

Slow copying data on the USB flash drive can be due to incorrectly installed USB drivers. In this case, you can either update the motherboard drivers, or reinstall USB controller drivers. Updating motherboard drivers can be done manually by downloading the desired installers from the official website of the board or laptop, and you can charge this case to special programs - driver installation managers. Among those: Drivermax, Auslogics Driver Updater, SlimDRIVERS, Advanced Driver Updater, etc.

Update USB 3.0

The newest USB standard - USB 3.0 - appeared a few years ago, but many people still use devices with a 2.0 interface. The reason for this is largely related to the fact that disks with USB 3.0 are usually more expensive, and many shops offer a large selection of disks with a 2.0 interface, because they are more accessible and, as a result, more popular.

However, the transition to USB 3.0 requires much more than just acquiring a drive with the appropriate interface. The computer must also possess the USB 3.0 port. Desktop users can buy a new motherboard, and laptop owners can update with ExpressCard, however, many laptops do not support this feature, so you may have no other choice except to buy a completely new system.

Replace the old disc to the new

No one will argue that the flash drive is a very convenient device. It takes a little space, and you can download it enough, much more than on the disk. Unfortunately, download files does not always work quickly. What is the problem how to speed up the flash drive? Solutions here are several. And the case may not be at all in the drive, but in the computer. And now we will tell you more about everything.

First action

To begin with, it is necessary to make sure that all computer systems work normally. Sometimes there is a need to reinstall the system if there are failures in the PC. Also special attention should be paid to the installation of drivers on USB port. You can download them on the Internet or found on the installation disks to devices that are connected via USB. The driver that are written on the disks released after 2008 are more quickly considered. On the official website of your motherboard, you can update the drivers if such a need arose.

Second action

Now in Bios, set the maximum speed. How to do it? When the computer starts, we immediately press the "Del" or "F10" key (F2). We find "USB Configuration", choose. Here we need to activate USB 2.0 Controller. To do this, select "Enabled". We will have an item - USB Controller Mode, press "ENTER", install Hispeed or FullSpeed. When you exit, we definitely save the settings (F10 - ESC). After that, the computer will reboot. Now the flash drive will work with the maximum speed.

Third action

How else to speed up the work of the flash drive? Also, a lot depends on what is your USB port type. For example, if this is USB 1.0, you can not do anything, except to buy a PCI USB controller. Currently, ports of type USB 2.0 are most often used, and the fastest PCI USB 3.0.

Fourth

If everything is fine with that, it is necessary to check whether all PC resources work on the full power. To do this, call the task manager (CTR-ALT-DELETE). We look at the readings of the OP and loading the processor. Very often, the "lion" share of resources occupy anti-virus checks, which significantly slows down the work of the flash drive. The same applies to malware.

Fifth action

Oddly enough, much depends on which USB port is connected to the flash drive. If the OS gives a message that your device can work faster, it means that it makes sense to connect it through another connector. What is it connected with? On the front panel can install ports with a lower level than on the back. You should also not forget if you connect a flash drive through a cable, the speed may be lower than the connection directly.

Sixth action

If everything is in order with the computer, it means that you need to check the flash drive itself for errors. To do this, click on it right mouse button. We find properties and click once the left mouse button. We go to the "SERVICE" section, select "Perform Check". In the window that opens, put the checkboxes in all available items. Now it remains to click "Run" and wait for the end of the check. It will also not be superfluous to check the drive for viruses and format as usual. To make the last, perform the following actions: Click on the flash drive right key - format - Fast cleaning - start. Just do not forget that after this procedure, all files available on it are deleted from the flash drive. Therefore, it will be wiser to copy everything to the computer, and then format.

Seventh action

And last, how to speed up copying on the USB flash drive. To do this, we will have to change the file system of the drive. Usually, when buying it is installed FAT32 or simply Fat. They are not very convenient for working with large-volume files and high-capacity flash drives. For this, the NTFS system is most suitable, which is considered the most convenient and reliable. This is done as follows: by clicking the right key on the flash drive, select format. In the window that opens, change the file system on NTFS, as well as the size of the cluster. Initially, it is equal to 4k, put the greater, (maximum value of 64k) and press it. There is nothing complicated.

Now you know how to speed up the work of the flash drive. The main thing is to find what is the problem, and then decide it. But sometimes it still happens that the flash drive is simply defective or failed. In this situation, it can only be changed.

Transferring data from a computer hard disk to an external drive and vice versa - this is perhaps one of the most common tasks that each PC user performs regularly. Photos, video, music, documents, backup copies of data and other important files - all this we are almost every day copying there and back, sometimes even several times per day.

I am sure, each of you does not observe how much the low data transfer rate is strongly annoyed. None of you will be delighted to look at how several gigabytes of information are copied for 10 minutes, and you are somewhere late. To our joy, there are some simple ways to increase the transfer rates.

Enable the "Optimal Performance" policy for your USB drive

For all USB drives, the Windows operating system uses quick removal policy by default. In this mode, the caching of the records is disabled, which slows down the data transfer rate, but allows you to remove the device without using the "Safe Removing Device" function.

To activate the "Optimal Performance" policy, open the Device Manager, expand the "Disk Devices" tree in it, and then find your USB disk (it must be connected to the PC). Now double-click on it with the left mouse button and in the window that appears, go to the "Politics" tab. Next, select the "Optimal Performance" parameter, and then press the OK button.

Remember, if you enable this policy, each time you disconnect the USB drive from the computer, you will have to use the "Safe Removing Device" function. Failure to comply with this requirement may result in data loss. To make this process easier, you can create a shortcut on the desktop, which will allow you to instantly open the "Safe Removing Device" menu.

To do this, right-click on the desktop and create a new shortcut, and specify the following line as the object location:

% WINDIR% \\ System32 \\ Control.exe Hotplug.dll

Change the file system

The file system used for the drive can also affect performance.

If you have Windows, use the NTFS file system for your drive with a size of a single distribution unit of 64 KB. This is the fastest configuration for a modern PC with Windows. If the USB drive is used on computers with Mac OS X or Linux, the correct choice will be FAT32 with a distribution unit of 64 kb.

Format disk from under Windows is very simple. Open the My Computer (or "Computer" window if you have Windows 8), in the list of devices, right-click on your USB disk and select "Format". So you will open the menu in which you can change the file system and the size of the distribution unit. Select what you need and click "Start". Remember that formatting will destroy all the files stored on the disk, so before you start, make sure that there is nothing important on it.

Disconnect Legacy Mode in BIOS

Extremely low transmission speed can sometimes be caused by a BIOS feature called USB Legacy Mode. This feature is designed to provide compatibility with old USB devices, which otherwise could not work, but also USB Legacy Mode can limit the data transfer rate.

The procedure when disabling Legacy Mode will depend on your motherboard, but I can still give several recommendations. First, you need to enter the BIOS, which is performed on most computers by pressing the F12 or DEL button when you start the computer. When you get into the BIOS, go to the "Advanced" section (or "Drives"), and then find the "Legacy USB Support" parameter. It will be either disabled or enabled; If it is enabled, disconnect it. Next, save the settings and restart the computer. For more detailed instructions, you can contact the company's technical support site that has released your motherboard.

Please note that the disconnection of this parameter can lead to the fact that some old devices, in particular, keyboards and mice will not work.

Update USB 3.0

Replace the old disc to the new

Over time, USB drives become slower, since repeating read / write cycles lead to the wear of the memory cells. So if your flash drive is very slow, and typical solutions do not help, just try to buy another.

That's all. I hope all these tips will be useful to you.

Tell me why I have so slowlyfiles are singing From one partition of a hard disk to another, I'm not talking about copying files to the USB flash drive. It seems to me that the speed is no higher than in the Vista operating system. I have to work a lot with photos and one big folder I can not transfer anywhere anywhere, copying is broken in the middle of the process and hangs until infinity, the most importantly reinstalling the seven question did not solve, on a clean system without programs, copying files was performed slightly faster. In the forums who says, and the main thing except Total Commander cannot offer anything. Here is downloading files over the network, it suits me. Tell me. How can I fix the situation in my case?

Slowly copied files

Yes, there is such a problem, even a long time ago, when we just tested the released beta version, many about it said, but then stopped. And actually in windows 7 pretty slowly copied files From one section of the hard drive to another, and on portable carriers a little faster than in Vista. File managers The question is solved not quite and the matter is primarily due to improving security in Windows 7.

Firstly, it's not a secret for anyone that strongly affects copying files built-in Windows 7 security tools, namely, monitoring accounting records, because it checks almost everything that happens in the operating system.
Suddenly the file you are copied at all do not belong or you have no right to change it and work with it. Secondly, the conductor participating directly in copying files is a very difficult task, because there is an AERO interface in the seven. Personally, I myself tried to disable it partially and completely in the speed parameters and was convinced that when some effects are disconnected, the speed in general increases, you can read from us.

The Internet has repeatedly expressed the opinion that slow copyfiles It may affect the effect included in the speed parameters - Display sketches instead of iconsSince your operating system is needed instead of a simple file icon to display its sketch, I agree with this opinion, but in general this effect I consider it convenient and it is turned on.
As for the inability to copy you some kind of folder with photos or movies, think, may these files are now used by another program, such as torrent client, close it and try copying again.
One of my friend kept all his junction in one big folder, these were all sorts of AVI, XML, DOCX, ISO, JPG files. The folder was very big and everything was confused in it, there were not until the end of the downloaded movies and so on. It is even sometimes for the experiment I changed the extension of video files, when I could not open them for example in the program you need, naturally all this chaos, the Windows 7 conductor could not stand and copy the entire folder to the portable hard drive, always depended on the middle and never We did not end luck. Only when we brought out the general cleaning and all damaged files simply deleted, we managed to copy it. So on the computer friends you always have to be an order.
Well, at the end I will say that using a file manager, for example, Total Commander when copying files in Windows 7 will surely help a little.

. What to do?

Each person who is dealing with computers, sooner or later faces difficulties: system brazing, unexpected reboots, errors. One of the most common problems is too slow copying files. Moreover, other symptoms may not be observed.

The most likely cause of a copy slowdown is a hard disk malfunction.

First, some models of hard drives in principle are not able to work quickly, in such cases nothing can be done - only replacement will help. The speed of the HDD is affected by many parameters. Most users do not want to go into technical details, and they may well take advantage of special utilities for testing hard drives for reading and writing speed.

Winchesters can start braking already during operation. This is due to the wear of the hardware, as well as the inability of some users to contain in order the file system. From this situation there is an output. First, you need to check the disk on errors. It helps in some cases if. To do this, you can use standard Windows tools. The procedure for action is:

Open "My Computer"
Right click on the icon of one of the local drives.
Click on "Properties" -\u003e Open the Tools tab -\u003e Click on the "Check" button (the name may differ slightly in different versions of Windows)
In the window that opens, put all the checkboxes and run the check. Most likely, scanning for errors will be started after the next reboot of the computer.
Repeat the procedure for all local discs.

An important parameter affecting the speed of HDD is also its fragmentedness. When there are a lot of fragments, slowly copied files on the computer. The task of a responsible user is to fulfill regular defragmentation. You can do it like this:

Open "My Computer" and right-click on the local disk.
Open "Properties" -\u003e "Service" -\u003e Click "Perform Defragmentation"
The Windows built-in defragmetator window opens.
Select a disk and start it with the bottom button.
The program will check the disk on fragments and gives you your verdict: you need a defragmentation or not.
In the case of a positive response, you launch defragmentation.
Repeat steps 4-6 for all disks.

Check HDD and volume defragmentation can be carried out for prevention, without waiting when the brakes appear.

If after the proceedings done still slowly copied files, Check if you have enough space on the system disk (default C: \\). If there is little space, not only copying files can be slowed down, but also the work of the computer as a whole.

Among other things, do not forget to regularly clean the system registry, the litter of which can also affect speeds. You can do this using third-party programs. Do not forget about the elementary mechanical cleaning of the system unit to exclude overheating.

Keep the system clean, be careful with your iron friend, spend its cleaning from dust, and your computer will gratefully repay you reliable, long and unquestioning work. And also files will be copied quickly.