What to do if your touch phone fell into water, how to dry it on the battery, in rice? Is it possible and how can I repair a touchscreen mobile phone myself if it falls into water and does not work? What to do with an iPhone that was dropped into water or water has flowed under the screen

It is difficult to imagine a modern person without a cell phone. Unfortunately, no one is safe from juice or tea being spilled on the device. It may also fall into a puddle or bathtub. Few people understand what to do if their phone falls into water. If you follow simple instructions, you can save the device on your own.

Phone rescue

It doesn't matter how much water gets on the phone. Sometimes it is enough to drop the device on a wet floor and it stops functioning. There are cases when the phone works even after falling into a puddle or bathtub, although this is a rare occurrence.

So, if a touchscreen phone has fallen into water, you need to get it out of there as quickly as possible. Delay will have a detrimental effect on the condition of the smartphone and most likely it will no longer be possible to revive it. It is important to note that if the mobile phone remains in water or a wet environment for more than half an hour, it can be thrown away.

As soon as the mobile phone is removed from the water, it must be turned off immediately. After this you need to extract:

Battery;
SIM card;
SD card.

It doesn't matter whether you have a touch or push-button phone in front of you, as the recovery procedures are similar. First you need to remove . A phone that has fallen into water must be completely disassembled to increase the chances of recovery.

How to dry your phone

After your phone has fallen into water and the parts have gotten wet, you need to dry everything thoroughly. First, each element is wiped with a paper napkin. All movements must be careful so as not to damage the microcircuits. It is worth noting that alcohol can be used instead of a napkin. During the process of evaporation, it eliminates all moisture.

Then you need to make sure everything is dry. The best drying method is air flow. There is no need to grab a hairdryer, as hot air will damage the device. It is recommended to use a small vacuum cleaner with a narrow nozzle.

The device turns on at minimum speed. Then each hole is blown out. You need to be careful with the microcircuits so that they do not come off during purging. Each part should be dried for 10 minutes. Remember that the vacuum cleaner should not touch any smartphone components. The device should be kept at a distance of 1-2 centimeters from the surface of the phone.

Traditional methods

Those who have dropped their phone in water or other liquid should know that there is a traditional way to dry your phone. One such remedy is rice. If desired, instead of cereal, you can use absorbent material, which is added to shoe boxes or leather bags.

A little rice is poured into a plastic container, and a smartphone is placed in it. Now all that remains is to add more rice. The cereal should completely cover the gadget. The phone should be left in the rice for at least 24 hours. It is worth noting that it is not enough to dry a device that has fallen into a liquid with a high level of acidity, as the destruction of the microcircuits will begin.

After drying, the device should turn on. It is recommended to test all functions of the device. Sometimes users ask what to do if the phone falls into water and does not turn on even after all the manipulations done? In this case, you need to contact specialists.

Mistakes made

When trying to fix a phone, most people immediately grab a hair dryer, trying to get rid of moisture faster. Remember that such an operation can completely damage the device. This happens for the following reasons:

A stream of hot air melts the plastic parts of the phone.
Droplets of water penetrate into hard-to-reach places.

Since fixing a phone seems easy, smartphone owners don’t think about the consequences. Another common mistake is to use:

Gaza;
Hot battery;
Microwave oven.

Using such tools will cause your phone and battery to overheat.

Fell into the water? With such devices things are a little more complicated. It is not recommended to disassemble smartphones yourself. You can move incorrectly and your smartphone will be damaged.

No matter how much your phone gets wet, there is no need to rush. Every step must be thought out. The phone should not turn on. Otherwise, a short circuit will occur. It is necessary to get rid of excess moisture as quickly as possible.

Home appliance stores sell specialized bags that quickly absorb water and other liquids. It is recommended to purchase such a substance in advance. You may not need it, but it's better to be safe.

Despite the fact that there is a way to resuscitate the phone, it’s not worth doing anything yourself. It is best to contact specialists with a smartphone. If it fell into the water, its place is in the service center.

Specialists will carry out a complete diagnosis and drying, and, if necessary, replace the damaged elements. It should be noted that sometimes repairs are more expensive than a new phone. If specialists managed to revive the phone, then it should turn on.

Video instructions: how to revive a drowned phone

Conclusion

Any phone can fall into water. It should be noted that you can handle push-button devices yourself. If we are talking about sensory devices, then it is best not to take risks. Service will cost no more than 800 rubles, and a new phone costs much more.

If you wish and have some skill, it is possible to revive even a smartphone, but then it is best to follow the instructions. As for folk methods, you shouldn’t trust them too much.

Six simple steps to save your device.

Accidentally dropped your smartphone into a sink or pond, left your phone in your jeans while they were going to be washed, or spilled juice, tea or coffee on your phone? This can happen to anyone at least once, and not all phones are protected from moisture, such as Samsung Galaxy S7, Apple iPhone 7 or Sony Xperia Z3 Compact. Spilled liquid is dangerous due to both short circuit and corrosion of the smartphone. If the correct measures are not taken in time, a smartphone that has been in water will experience a complete or partial malfunction. The site's team of experts has tried all known methods to solve the problem and offers simple steps to save your phone.

1. Get your phone out of the water

The very first thing you need to do if your phone falls into water is to pull the device out of the water as quickly as possible (if you spilled liquid on it, go to step 2 of these instructions). Seconds can count - liquid can easily leak and penetrate into the phone case if it is not protected from water. However, if your phone is being charged from the network at this moment, then under no circumstances touch the device and the charger! It may be dangerous! First, turn off the power to the outlet, and only then remove the phone from the water.

The longer the phone is in the water, the less chance of a favorable outcome. Even if the cover and case elements fit tightly together, water can freely penetrate to the chips, for example, through ports and connectors for charging and headphones, or openings in speakers and microphones. But even if the phone has been in contact with water for a long time, you still have a chance to save the device.

2. Remove the battery, SIM card and memory card

Free the phone from the case (if there is one), remove the cover of the device and remove the battery from the phone case (if the case is collapsible and the battery is removable) so that the chips on the board do not oxidize. Next, take out a SIM card and a memory card - contacts and data on them are sometimes more valuable than the smartphone itself.

Do not turn on your phone under any circumstances. It is better not to press any buttons or keys again, as this may cause the water to go even further into the body. If any peripheral devices were connected to the smartphone, then disconnect them; if the ports are covered with plugs, then leave them open for ventilation.

3. Wipe your phone

Thoroughly wipe down your smartphone and anything you took out of the phone. A dry, absorbent rag or towel is suitable for this. Carefully remove every drop from the surfaces accessible to you (depending on whether your phone has a collapsible case or not), because even one remaining drop can destroy the phone. Be careful not to leave pieces of paper or fabric inside the cabinet, in corners, or in crevices. If there is still water inside the device, you can try to gently “shake” the liquid out of it. However, you should not get carried away and do it with force - there is a risk that water may penetrate even deeper into the device.

4. Disassemble your smartphone

As a rule, it is enough to get by with the cover removed and the battery removed. However, if you believe in your abilities and have experience, then disassemble the phone into the smallest possible individual parts. This is done so that the air (or absorbent substance) has a large contact area for good circulation and drying.

It is worth considering that in this case you will lose the warranty, but most often the warranty on a smartphone does not cover cases of “swimming” in water, so in this regard you will not lose much. We advise you to record or photograph the disassembly process step by step, this will help you quickly and correctly reassemble the device after drying. After you have disassembled the phone, repeat the steps from the previous paragraph.

If you spill juice, tea, coffee, wine or beer on your phone, be sure to wash the stains with distilled water or alcohol so that there are no traces left that can then dry out. These drinks contain many chemical elements that, remaining on the surface of the device elements, destroy them, so they must be removed. If this is not done, then your device will die at the most unexpected moment, taking with it valuable information to the “other world”.

5. Dry your phone

Now all that remains is to dry the smartphone. There is an opinion that it is best to dry your phone with a hairdryer, but we do not recommend resorting to this method. If there is moisture left somewhere, the hairdryer can send it even deeper into the case, which can only “finish off” the phone. Also, do not dry the device in the oven or microwave. For such situations, a vacuum cleaner with narrow attachments is more suitable.

If you don’t have a vacuum cleaner at hand and, at your own peril and risk, decide to use a hairdryer, then turn on the warm stream not much warmer than room temperature and keep your distance (distance to parts). A vacuum cleaner, on the contrary, will draw out moisture. You need to bring it with a narrow nozzle to each of the holes and gaps and hold it for a few minutes. Just in case, make sure that everything is securely fastened and will not go inside the vacuum cleaner (especially if you disassembled the smartphone).

You can also dry electronics in rice, but it is preferable to use silica gel. You can also simply dry the components in a dry room on plain paper for about one and a half to two days. The disadvantage of silica gel and rice is that they themselves quickly become saturated with moisture and over time the rate of moisture absorption decreases. You will have to turn your smartphone or replace the absorbent every couple of hours, so air drying is much easier.

By the way, if you use substances that draw out moisture, it is better to put them with the phone in a small sealed package.

6. Assemble and turn on

After one and a half to two days, you can assemble and turn on the device. First, check your phone to make sure all connectors and parts are dry and clean. If yes, then you can assemble the device. If you have not disassembled the phone in detail, then simply insert the battery. Try turning on your smartphone with or without a battery, but from the mains. There could be several scenarios here. If in both cases the mobile phone turns on, then check if everything is working properly. If not, but the computer responds to it via the USB cable, or the phone turns on or responds to charging from the network, then perhaps a new battery will help. If in both cases nothing works, then you should contact the service center. It may often happen that the phone starts, but does not work correctly; in such cases, you can repeat the above steps (there is probably still liquid left somewhere) or take it to a service center for repairs and tell them that the phone was in water and that you they did to him. Please note that even if the smartphone turns on or works after replacing the battery, a corrosion process may begin inside your device, which will act like a time bomb and “kill” it at the most unexpected moment. It can take quite a long time, and only a service center can help you deal with it by treating the board with an anti-corrosion solution.

By following these simple instructions, you can try to save and revive your phone. However, remember that there is simply no 100% guarantee in such cases. To protect yourself from such situations, you can buy special waterproof cases or follow simple precautions. Take care of your gadgets!

Let us remind you that on our website you can view the results of smartphone tests. Our experts tested the quality of popular models in the laboratory and, based on the test results, compiled a rating of smartphones.

Want to understand other important issues? Read

Electronics are terribly afraid of water. Therefore, if your phone falls into the water, quickly start rescuing the “drowning person”. The sooner you come to the rescue, the more likely it is that the mobile device will “come to life” under your strict guidance. Analogies with a drowning creature are appropriate here. Think less about whether the patient is alive or dead, start acting faster! Wait a couple of minutes - and the phone will no longer be saved.

This recipe for saving a mobile device is applicable to any hardware. It doesn’t matter whether it’s a phone or a tablet, Android or iPhone. Water can leak into the player, electronic watches, and fitness trackers.

Cases of dangerous penetration of water into the phone

The phone fell (in a puddle, sea/river, etc.) and does not turn on
You went swimming in the water with your phone, forgetting to take it out of your shorts
You foolishly dropped it in the toilet while taking a selfie or looking at pictures
The phone was doused with water
We washed the phone in the washing machine and it's still intact.
Ate and dropped the phone in the soup while talking

So, the liquid got inside. What urgent procedures need to be performed with a phone that has fallen into water?

First steps to take if water (liquid) gets into your phone

Get the drowned phone out of the water as quickly as possible. Do not make sudden movements so that the liquid does not distribute inside and penetrate even further: into the electronics, under the case.

Every second counts. In the best case, water will not get on the electronic components of the phone. At worst, if the phone falls into the water, even a waterproof phone or tablet will stop turning on, unable to withstand the depth and will fail instantly.

Advice. If you dropped your mobile phone in the toilet, you can put on gloves (don’t be disdainful: the life of your iron friend is at stake). And for the future, know that it is better not to talk on the phone and write at the same time in the toilet. This is inconvenient and even dangerous.

Quickly turn off the phone (take out the battery)

Turn off the phone (if it is still working) and remove the battery by removing the phone cover. This will prevent short circuiting - one of the main dangers and the reason for the phone to fail.

Advice. There is no need to test the phone's performance immediately after you have saved it from drowning. The worst thing is to leave the battery in the phone and start calling friends, checking the quality of the connection. With these rash actions you will literally kill your phone.

Make the most of your phone

In addition to the battery, you need to remove all parts that can be dismantled. SIM card and SD card - first of all. This is done:

for the safety of removed components (it is almost impossible to restore contacts on a SIM card)
so that the phone dries faster and there is no interference with the air during drying.

If you know how to remove other, smaller parts of the phone, do so.

Drying your mobile device

Remember also that the faster the water dries, the greater the chance that it will not penetrate inside. To begin, gently wipe the phone with a dry cloth and wipe off any moisture on the surface.

To speed up the drying of your phone, a hairdryer or vacuum cleaner is suitable. Use a narrow nozzle so you can dry the holes. The iPhone is especially sensitive to such temperature changes.

You need to dry the phone carefully and at a sufficient distance so that the microcircuits are not exposed to thermal effects - they simply do not melt. For a hair dryer, use only cold drying mode!

Advice. Dry your phone at a distance that you consider comfortable for yourself. The fact is that a hairdryer can do a bad job if you haven't wiped down your phone. Moisture under air pressure will penetrate inside.

Additional drying of the inside of the phone

The drying process cannot be rushed. After making sure that there are no droplets of moisture on the surface of the phone, leave it alone for 48 hours. Place your phone on a dry, absorbent cloth (such as a towel).

Advice. For effective drying, dip your phone in a pile of dry rice. It absorbs moisture perfectly. It is advisable not to eat rice after drying. Especially if you took the phone out of the toilet.

Conclusion. What to do if you couldn’t save your phone from water

These methods do not always help in cases where the phone is dropped into water and does not turn on (often some component falls off - for example, a microphone or camera - what is located on top). We hope these tips helped you save money on a new iPhone or Android.

If it doesn’t help and the phone still gives up, contact the repair shop.

Think positive and believe in miracles. You did everything you could. If you managed to save your friend in this way or you have questions, write and share.

There are a lot of situations when our smartphone can come into contact with water. You might get caught in a heavy downpour, knock over a cup of drink onto a nearby smartphone, or even drop your phone into the water while taking a hot bath. Recently, smartphone manufacturers have been trying to introduce water protection into their devices. However, the percentage of such devices is still very small, so our article will be relevant for a long time.

We will tell you what not to do if your smartphone gets wet, as well as several ways to correct the current situation.

1. Remove the smartphone from the water, turn it off and disassemble

As we were taught in life safety lessons, the first step is to get rid of the source of danger. In our case, we immediately take the device out of the water and turn it off. The smartphone has both slots and connectors for headphones/charging, through which water can instantly reach the insides and can cause a short circuit. After you take out the phone, you need to wipe it with a dry towel and also remove the battery. This will completely de-energize the device and reduce the likelihood of a short circuit to zero. We recommend removing the SIM card and memory card along with the battery.

IMPORTANT
Do not turn on your smartphone until you have completed all instructions.

2.Wipe all parts of the device well

After you take out the device, you need to wipe it thoroughly with a dry towel to get rid of all visible moisture. Do not use regular napkins or paper towels. It's no secret that paper napkins not only absorb moisture very well, but also quickly get wet, breaking up into small fibers. These lint will get caught in the holes and crevices of the device and will only make things worse.

Take a rag or cloth towel and wipe the device dry both outside and inside if water does get there. Do not leave a single drop on the surface, because any little thing can cause corrosion and render the device inoperable.

3. Hair dryer or vacuum cleaner?

For most people whose phone has fallen under water, the following situation occurs. They successfully complete the first two points of our article, but then they begin to search for additional solutions, what else can be done for the wet device. The most popular options are a hair dryer and a vacuum cleaner.

REMEMBER! Never use a hair dryer to dry your phone. Contrary to the idea that hot air will quickly dry out all the moisture, you need to understand: the air flow will not only drive the water even deeper, but can also melt some parts.

To speed up the drying process, you can use a vacuum cleaner. When drying, do not hold the hose too close to the smartphone; carry out the procedure for 7-10 minutes.

4. Put the phone in the sun in a box with absorbent or rice

Finally, when all the main steps are completed, you can begin the longest stage. The disassembled phone (we took out the battery, SIM card, flash drive) needs to be placed in a container with an absorbent substance. You've probably seen bags of this substance in shoe boxes.

You can purchase such a substance in the store in advance, in case of such an unforeseen situation. But, if the water ingress takes you by surprise, regular rice may be suitable as a “homemade substitute.” Place the device in the substance for a day and turn it over periodically, allowing water to drain out of all crevices. Only after the day has passed, having made sure that all the water has left the phone, can you try to start it.

If the device does not work, feel free to go to the service center.

5. What not to do

Finally, we would like to list what you absolutely cannot do if your phone falls into water.

You cannot turn on the device right away. You can turn on the phone only after complete drying, when you have waited enough time for all the moisture to leave the device. Naturally, in a “wet” state, it is strictly forbidden to connect the device to a power source (put it on charge or connect it to a computer).
Do not disassemble the device into parts. Most likely, you are not an expert, and by taking your smartphone apart (more than taking out the battery), you will only make things worse. The water will get even deeper, and you will break something.

All the best. Take care of yourself and your phones :)

Such a misfortune can happen to anyone, and to some it has happened more than once. Someone drops their mobile phone into the sink or toilet, someone washes it with their clothes, and someone simply spills some liquid on it.

The device does not turn on? Don’t rush to get upset, you can try to bring him back to life. We know how you can revive a drowned phone in a few simple steps. Nobody gives guarantees, but why not try?

1. Turn off your phone. This is exactly what needs to be done immediately with the device pulled out of the water. The fact is that the breakdown of the device is not due to the destructive effects of moisture, but to short circuits that appear due to it. Under no circumstances should you shake the phone, as the liquid may penetrate even deeper. If you can remove the battery from the phone, then this should be done as soon as possible. If it is not removable, then you should at least turn off the power. If the device was turned off when it was hit, do not try to turn it on to check. It takes a couple of days to get the phone back to normal, so be prepared to do without this device for a while.

2. Disassembly. Everything that can be superficially unscrewed and unscrewed on the device must be removed. This could be the back cover, SIM card, plugs. But the main thing here is not to overdo it, otherwise the phone will be disassembled down to the small screws, and then you won’t be able to put it back together. It is important to understand that a wet device requires as many holes as possible for drying.

3. Drying. It’s good if you have a vacuum cleaner with a nozzle in the form of a narrow tip on hand. With its help, you can try to remove the maximum amount of moisture from a wet device. It is best to vacuum every accessible hole for at least five minutes. In extreme cases, you can use a hairdryer to dry it. However, it is important to remember that the air stream must be cold, because a warm stream can simply melt the parts. So in this case it is better to use a vacuum cleaner.

4. Drying. This step will require that the affected device dry out. To do this, it is better to put the phone in a container with rice. The secret is simple - this cereal absorbs moisture well. The main thing here is to be patient and leave the device in this condition for at least two days. If after this some traces of moisture remain on the phone (this could be a foggy screen), then you can wait another day. If the device appears to be normal, then you can try to turn it on.

If these steps were completed correctly and in the right sequence, then there is a high probability that the phone will work as if nothing had happened.