What to do if your computer stops working after updating. Windows does not load after installing updates Laptop does not turn on after updating windows 10

Let's talk about what to do if Windows 10 won't boot. Most often, the problem manifests itself in the fact that the system does not load beyond the splash screen with the Microsoft logo or black screen is displayed... An important point: in this article we will consider options for solving the malfunction, assuming that the problem lies precisely in the software part... Therefore, if you have suspicions that Windows 10 does not start due to hardware malfunction, or a specific error is issued, you need to look for a solution by the name of the error or a specific symptom of a hardware malfunction.

Random crashes when starting Windows 10 and how to fix them

If Windows 10 won't boot, we recommend checking the following couple of methods to fix boot problems first. They are often associated with a temporary OS failure. These tips may seem strange to you, but these are the solutions most often described by users in the comments.

1. Disconnect the internet and restart your computer. Sometimes, when a black screen appears during boot, it helps to disconnect the patch cord from the network card, turn off the wifi laptop or turn off the power of the router.

2. Press and hold the power button for more than 4 seconds to force the computer to shut down. After a few seconds, turn it back on and try to start Windows. It happens that the PC incorrectly (so to speak "not completely") exited the hibernation mode.

Scanning your computer for viruses

Viruses can also be the reason Windows 10 won't start. Therefore, we advise you to create a bootable media with DrWEB antivirus and check the system. How to do this is written in.

Checking free disk space

Check if there is enough space on the system drive (usually the C :) drive. Due to its lack, problems often arise with the launch of the operating system. If necessary, clean up space by moving some files from folders such as Downloads, Video or Images to another drive. You can clear space by booting from any LiveCD - even from the same DrWEB LiveUSB, which we talked about in the previous paragraph.

Booting in Safe Mode and Removing Problematic Software

So, boot into Safe Mode. The last section of the article describes step by step how to do this if Windows 10 does not start. If it was possible to enter Safe Mode, then this fact in itself indicates that the malfunction most likely at the software level (although there are exceptions).

Now, as mentioned above, you need to either uninstall the program after which Windows 10 stopped loading, or the driver, depending on your case.

Removing the update:

Removing the driver:

Rollback to a restore point

System Restore can be run either from Safe Mode or boot from a Windows 10 installation flash drive. The second option is more reliable:

1. Create a bootable USB flash drive with Windows 10. How to do this is described in. It is important that when creating the media, you select the same edition, language and bitness as the current OS that will not boot.

3. Select language, input method and press Further:

4. In the next window, select System Restore:

5. Then Diagnostics → Extra options → System Restore... There is a nuance here: if the update was not enabled in advance, then you will not be able to restore the system to an earlier state. If there are points, try to roll back. It will not work with one - try another. To learn how to try to roll back the system if the system does not start, read our.

Returning Windows 10 to its original state (reset)

If none of the above helps and you still do not start Windows 10, then to restore the computer's performance, it remains to do a reset. For this:

1. Boot again from the USB installation media. Press any key when you see Press any key to boot from CD or DVD ...

2. Select language

3. Select System Restore:

4. Select Diagnostics and Reset the computer to its original state:

select delete everything,
select your copy of Windows,
click Only the disk where Windows is installed(in most cases you will have the C drive :),
to push Just delete my files.

Then press the button Return to original state:

The return procedure is not quick compared to the other methods described above. However, if your Windows 10 does not boot because of serious software problems, then this method often really helps to solve the problem.

Good health, my dear readers, brothers-in-arms in computer subjects, as well as just guests of the site.

Yesterday I updated the operating system and could not boot from it. The fact is pedal, but quite solvable. After digging into the essence and causes of the problem, I found a way out. Therefore, today I will tell you what to do if windows 10 does not load after the update. We read carefully and remember!

What could cause this to happen?

There can be many factors, like consequences and causes. We caught a virus (in this case, Comodo Internet Security will help), the update got up crookedly, the app store does not work, and much more. It is possible that the registry structure is simply damaged, which is why Windows simply cannot find boot sectors. Tracking the stability of your personal computer and a couple of auxiliary programs will help prevent this situation.

For instance, SS Cleaner... Ideal for users with minimal computer knowledge. Also, it is fine and - Reg Organizer... Also excellent software that will help you clean and configure the system.

It often happens that the update package comes out rather crude, therefore, due to a conflict with any of the drivers, the operating system may slow down, for example, the computer hangs on the screen saver. This is quite fixable, and we will consider examples of solving this problem below.

It is important to understand that any service packs and patches need to be downloaded only from the Microsoft website. Otherwise, you can completely spoil the installed graphical shell with low-quality content, to which, most likely, an inexperienced programmer, or even a hacker, which is even worse, has had a hand. Since this can harm the most important aspect - security.

What to do if the laptop freezes on the screen saver?

Initially, I would like to warn you right away. In the tenth Windows, the installation of updates is slow. If the initial startup screen of the operating system hangs for 2-3 minutes. This does not mean that the system is slowing down. Perhaps at this time, the process of configuring the installed files and script bases is in progress. It can even take up to 10 minutes, depending on the size of the update itself. So it’s better to wait. And if after this time the OS does not react in any way. Then you can deal with this problem.

If the laptop freezes on the screen saver, we need to roll back to a stable version.

I want to warn you right away that this method is not a panacea and it cannot help fix the whole problem with Windows at once. It only helps to fix the registry key. HKEY_LOCAL_MACHINE \ System \ CurrentControlSet... The boot menu of the latest working configuration in the latest version of the operating system is not by the standard, but this item can be added.

We go to start, and on the line to execute, we type the command regedit.

The registry will open, we need to move to the section HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Configuration Manager... Here I will draw your attention to a parameter called BackupCount. He is responsible for how many times the system will save its state for rollback. According to the standard, there is only one, but you can change this figure yourself.

Now we go, as shown in the figure below, to the OS configuration manager. There you need to create a subsection. It should be called like this - LastKnownGood... In it, you need to create a parameter called - DWORD, make no mistake with the name. Set it to Enable.

This should also help if you get a blue screen after updating.

How to restore the system more correctly?

It happens that after installing the drivers a black screen appears. A simple rollback will not help here, since the software part of the operating system is affected. you need to fully recover. This can be done in 5 different ways.

First... We go to the start menu, there we go to the parameters of our system and select " System protection».

Now you need to choose restore state from checkpoint and press Further... A time plate appears, in which you need to select the earliest point. Click it and restore it. At the same time, we will not lose files and will not have to go into the BIOS.

Second... A more radical method. It is based on resetting Windows to the original factory settings. It's like reinstalling, however, you won't need to copy and then restore files. The OS will not erase them. We go to the parameters of our laptop, then to the update and security section. Then we click on the restore line and select - return the computer to its original state.

Third way which uses file backup. Suitable when error 1607 appears. The latest version of the operating system has the ability to copy virtually all files for recovery. If necessary, they can be extracted and delivered as the main version of the software, thereby solving problems with new versions. But in this case, you will need to enable a feature called file history. You will also need an external drive - a USB flash drive or hard drive. We go to the parameters of our computer and open the section recovery and safety.

On the left side, in the menu, select archiving service... Now on the right side you need to click on the plus sign and select external storage partition, to which the data will be saved after copying.

If everything is completed and carried out correctly, then a switch will appear. It should be blue to indicate that the feature is enabled.

All now selected files that can be configured manually will be compressed and sent to an external device.

Fourth. Using a recovery drive. An extremely useful method, although it takes a lot of time. It will help if the video card drivers are installed incorrectly. It will also help if the mouse does not work on the laptop. So, we insert a clean USB flash drive into our USB port. Next, we go to the start menu and there in the search bar we type the words - recovery disk. A section for creating one will appear.

The same can be done by pressing the key with the image of the Windows icon and the K (R English) key.

A window will appear with a description of what, in principle, such a chip is needed. We need to click the checkmark at the bottom and click the next button.

I would like to warn you right away that you need a flash drive at least 4 gigabytes. This is due to the fact that the tenth Windows is quite large in itself and the hard with recovery data will be quite weighty. This will be written in the next window. If everything is in order, the operating system will find the media itself and delete all data from it.

Next, the formatting of the flash drive will begin. It will take no more than 5 minutes. Next, there will be copying files. Here you will have to wait from 10 to 30 minutes.

If everything is fine, then you will see such a sign.

If you get a black screen, or the key f8 does not work does not work, you can use this recovery disc. Just boot from it and select the very first icon from the top left.

Fifth... Using the installation disc. If you don't have one, I'll explain how to do it. We take a USB flash drive of 8 or more gigabytes. We copy all the necessary files and format it. Downloading the image operating system and check it for viruses using AVG AntiVirus Free.

A from here the UltraISO program. Next, install it and open it. Then click here.

This article is about how to repair a build or uninstall updates in Windows 10. Windows 10 installs an update in the background, and more often than not, the user will only know about the installed updates after installation.

There are ways to stop automatic updates in Windows 10, but if your computer already has updates that cause problems in the system, you can delete them or cancel and restore Windows 10!

The previous Windows 10 Anniversary Update, or build 1607, did not make users very happy. Many have lost settings, applications stopped working, or the system refused to boot at all.

Let's see how to restore Windows 10 easily and easily!

In anticipation of the release of the next build of Windows 10 Creators Update, let's talk about how to roll back such an assembly. The described method will be relevant for any build of Windows 10.

We will look at how to restore system updates from under a working Windows system and what to do if the system does not boot?

The easy way to restore Windows 10

So, if you want to revert to a previous Windows 10 Build:

Go to Start / Settings / Updates and Security / Recovery
Next to "Roll back to an earlier build" click "Start"
After a short preparation, the system will ask you to indicate the reasons for the return. This information will be sent to Microsoft. Choose any of the suggested options and click "Next".
The next window is “Check for Updates? ". I click "No thanks"
Further, you will see a window with information that some of the system settings that were made after updating to a new build of Windows 10 will not be saved when rolling back to an earlier one. And also a recommendation on the need to create a backup copy of data in case of problems. Further.
another window with information about the need to remember the password for your account. Further.
Finally, when Microsoft thanks you for trying a new build of Windows 10, click Return to Previous Windows.

The recovery process will take some time and will be completely automatic. After a short preparation, your computer or laptop will restart and a window will appear about restoring the previous build of Windows.

It remains only to wait a few minutes and after the next reboot, the restored Windows 10 of an older build will be loaded again.

Thus, all settings and parameters of the previous build can be restored within 10 days after the update, later they will be erased automatically.

If you use any, you may accidentally delete the data for recovery earlier, because of which you will not be able to roll back ... Therefore, be careful.

How to repair Windows 10 if the system does not boot

You can also restore the system to a previous build from the Advanced Startup Options menu. This method is useful if, after some updates, Windows does not load.

In this case, the advanced startup options menu will load automatically if the system fails to boot three times.

You can also start it by booting from the recovery disk:

We select "Troubleshooting".
"Extra options"
"Return to the previous build."
After that, the return process itself will be launched directly.
To continue, select an account
Enter her password in the next window
And press the button "Roll back to the previous build" to confirm and start the rollback process.

Wait until the end of the recovery process to the previous build of the system, and after its completion, the fully functional system of the version that was installed before will be loaded again.

Ask your questions in the comments, we answer all the questions about how to restore Windows 10!

To understand why Windows 10 does not start, you need to determine after what actions the problem arose: reinstalling programs or removing system software or.

If the system was stable before the problem and the black screen did not appear, then perhaps the hardware part of the device should be checked for damage.

Computer does not turn on after update

In the window that opens, select the tile called "Diagnostics" and then the "Recovery" option. The system will do everything for you.

Wait a moment and all missing components will be installed, and the computer will restart.

If Windows does not start after the diagnostics and the black screen is still present, you should roll back the updates and return to the old version of the operating system.

Microsoft may not have fixed an installation issue for your device yet.

To rollback an OS to a previous version, the above diagnostic window is used. Click on the diagnostics tile, then on the advanced options tab.

Start System Restore:

In the window that opens, you will see all existing restore points and the date they were created. Select the point with the current date and click "Continue".

In a few minutes, the newly installed system will be completely removed from the computer and, by restarting the computer, you will return to using the previous version of the OS.

Black screen on system boot

If the system boots for a long time, and you see only a black screen, you should try to restore the parameters using the diagnostic window, as described in the previous paragraph of the article.

In most cases, the system restarts and starts working successfully again. Perhaps a black screen appeared due to incorrect installation of drivers.

A black screen on startup may be the result of a virus or spyware infection on your computer.

In this case, you should completely reinstall the operating system without saving any user files and programs, because they can transfer the virus to the new OS.

Long boot Windows 10

If your device has less than 2GB of RAM, it is normal for windows 10 to run slowly.

Your computer's hardware cannot handle the updated OS version.

For more comfortable work, install one of the previous versions of Windows on your computer, it will not start for a long time.

Optimization of the OS includes the following steps:

Remove all unnecessary programs from the autorun menu. You can view the list of software that loads when you turn on your computer in Explorer, for this, open the "Startup" tab;

Press simultaneously the Ctrl + Shift + Esc and further buttons to see all applications, just open the "Startup" section.

Then right-click on the unnecessary program and click disable.

Scan your computer for malware with powerful antivirus software;
Update the store and remove unnecessary applications from it, they can run in the background and load the system;

Creating a disc with a recovered OS version

You can only create a recovery disc using a production OS on another computer. Go to the control panel and enter the following text in the search box: "recovery drive".

Then you will see the following results. Click on the first one.

Rarely, but still it happens that after updating a laptop to windows 10, it does not turn on. A black screen appears with the mouse cursor and hangs on it.

Sometimes you can just wait and everything comes back to normal sometimes not. This can cause incompatibility. What can be done in this case? Often the problem is solved by removing the driver for the video card.

Many people solve the problem by disconnecting the network cable. Also note that after upgrading a laptop to windows 10, the old operating system remains in it for a month.

You only need. But if the laptop does not turn on, then this can only be done using the installation disc.

In safe mode, you can also roll back the system, the main thing is to be able to enter it.

What else can you do if the laptop does not turn on after upgrading to windows 10

Sometimes the matter may be in the BIOS settings. In it you need to enable the parameter "No-execute memory protect" to Enabled.

There are a lot of BIOS versions only and it can turn on in different ways. For instance:

Execute Disable Bit
Execute Bit Support
Execution Prevention
Execute Disable Function
Intel XD Bit
NX Technology
XD Technology
NX BIOS Control

If all else fails, try performing a hard reset. To do this, do the following.

Turn off your laptop and disconnect all connected devices including flash drives and drives.

Turn off the power, remove the battery, and then press and hold the power button for at least fifteen seconds.

Plug in the power, but do not insert the battery. Turn on your laptop. If turned on - great. Insert the battery and use as usual. Good luck.