Apple Watch Series 3 - The last generation of smart clocks from the Kupertin technological giant. Unlike Series 2, they are equipped with an autonomous LTE module running through the built-in ESIM (in Russia is not yet supported), so that can be used even without a smartphone. But it will still need to activate the device.

How to enable Apple Watch Series 2, 3?

To turn on, press and hold the "long" (not round!) Side button until the manufacturer's logo appears.

If for 10-15 seconds holding a long side button, the screen did not flashed and the device does not turn on, make sure it is fairly charged. Connect the "Charger" and leave for 30 minutes. After that, you can try to enable the device again.

How to set up Apple Watch Series 2, 3?

For the initial configuration, you will also need a smartphone updated to the latest IOS version, with Bluetooth enabled and an active Internet connection (mobile network or Wi-Fi).

How to generate initial setting

In order to initially configure smart watches, you need an iPhone with Internet access. How to connect these two devices:

• Include them;
• Lay the clock to the iPhone. Wait a while until the phone appears on the phone screen with a proposal to use a smartphone for settings. In it, click "Next". If it is not displayed, check the Bluetooth - it must be enabled. You can also open the appropriate application and click the "Create Pair" button;
• After that, a special animation will appear on the screen of the clock, and the smartphone will turn on the camera through which it will be recognized. Place the display of the device-companion in the center of the viewfinder, as shown in the prompts. If automatic recognition does not occur, click the "Create pair manually" button. The wizard will demonstrate device binding instructions;
• Choose, on which hand you plan to wear a clock;
• Agree with all terms of use;
• Enter the password from your Apple ID.

How to connect Apple Watch 2, 3 to WiFi?

The smart watches at initial activation copies the profile of the settings from the connected smartphone. That is, if Wi-Fi, GPS, SIRI is included on the iPhone, etc., they are automatically activated on the device-companion. Wireless network passwords will also be transferred along with the rest of the data.

Enable WiFi on Apple Watch 3, as well as disable it or configure other parameters, you can directly in the corresponding initial setup wizard window.

What else can I do?

In the initial setup wizard you can also:

• Set the password to enter. It will be activated when removing this accessory with hands;
• Configure the branded payment service;
• Install applications from the AppStore.

In the process of initial configuration, various tips on the screen will be shown on the smartphone screen.

Basic functions of Apple Watch Series 2, 3

Analysis of Apple Watch Series 2, 3

The program for tracking physical indicators is called "activity" and is pre-installed on WatchOS OS, that is, it is ready for work immediately after the primary setting.

Interesting

Instructions on how to enable physical activity tracking or disable it, are shown directly in the primary setup wizard on the smartphone. Tips are in the application itself.

The following indicators are displayed in the ring diagram interface:

• The number of calories burned during the movement (Mobility parameter);
• The total duration of movements (the "Exercise" parameter);
• The number of hours in the current day, in each of which you moved at least 1 minute (parameter "with a warm-up").

To view detailed information about each parameter, you need to swipe on the screen with circular diagrams up.

The parameters "Exercises" and "with a warm-up" are not configured. "Mobility" can be changed by a strong tap to any screen - then the screen will open with the settings of the calorie number that need to be burned to achieve a daily target.

Reminders about the need to "walk" are configured in the management application on the smartphone, in the "My Clock" tab - "Activity".

How to measure the pressure of Apple Watch Series 2, 3?

In no way. This model, as well as the previous, is not equipped with a built-in tonometer and therefore cannot measure blood pressure.

Measurement of the pulse on Apple Watch 2, 3

To measure the pulse, you must run the "Pulse" program from the application menu. In addition, the device constantly analyzes the heart rate with the active mode of "workout", as well as 3 minutes after its completion.

When you first open the "Pulse" program, the application will propose to include notifications about increased heart rate in the absence of physical activity of use. If necessary, this feature can be activated.

Apple Watch Pulse Variability

For measuring the heart rate, phototypemography technology is used, i.e. The pulse is analyzed in the degree of blood light in the vessels under the skin.

As a result, the quality of the measurement of the pulse may vary depending on how the photocells fit to the skin, from the color of the skin, from the health status of the user and other factors. The exact value may differ in a few shots per minute of the measured both in the large and smaller.

Sleep Analysis in Apple Watch Series 2, 3

Built-in quality monitoring tools and sleep phases in this device-companion no. Therefore, it is recommended to take advantage of third-party software that can be downloaded from the AppStore - such as Sleep ++, Autosleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3, using third-party

The principle of operation of various third-party software is about the same. Required:

1. Install the desired sleep tracker from the AppStore application store;
2. Open sleep tracker and start tracking mode.

Smart alarm clock for Apple Watch Series 2, 3

To use the clock as a smart alarm, you will also need to install third-party software with support for this function. For example, SLEEP ++ or similar from the above list.

How to use Apple Pay on Apple Watch 2, 3?

In order to work the branded payment service, you will need to install a password code. This is described in the instructions for the primary configuration of the device. In addition, right in the same menu you can bind a map with which you plan to pay for purchases.

To configure the service if this item has been passed to the primary setup menu, you will need:

1. Open the Watch application on the smartphone;
2. Open the "My Watch" tab;
3. Open the "Wallet and Apple Pay" item;
4. If the clock is not set to the password, the application will offer to install it right now. Do it;
5. Click "Add Map";
6. Select the map from the number already attached - or enter the data of the new one;
7. Enter the Card Security Code;
8. Click "Next" and wait for information from the Issuer Bank;
9. Click "Next".

Everything, the branded payment service will work.

To pay in the store, you will need to quickly press the side button on the clock twice and then bring them down the screen down to the terminal. When activated, they are slightly curled.

Need to know

If the transaction size exceeds 1000 rubles, you will have to enter a pine code of a tied card on the terminal.

Unlocking Mac using Apple Watch

Using the clock, you can unlock only those Mac computers and laptops that work on MacOS High Sierra and support Bluetooth wireless connection. In addition, all company devices must be associated with one account. To configure unlock, do the following:

1. On the computer or laptop, open the settings application, select the "Protection and Security" item, then "Basic";
2. Install a tick near the "Unlock MAC using Watch" item;
3. Enter a password account;
4. Confirm.

Everything. Now the computer will unlock automatically.

How to charge Apple Watch Series 2, 3?

For charging, you must use a complete wireless charger. It is enough to connect it to the network and put the clock with the back side on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AIRPOWER wireless charging.

How to charge Apple Watch outside home

For charging, you can use not only the household network. The power cable can also be connected to the USB ports of the computer, a laptop, an external battery ("Powerbank") or any similar charger.

How to update Apple Watch 2, 3?

Update software (WatchOS) is performed through the infused iPhone smartphone. Instruction:

1. Set the watch to charging. Before completing the update, it is impossible to shoot with charging;
2. Make sure they are charged by more than 50%;
3. Open the Watch application on your smartphone, in it - the "My Watch" tab;
4. Select "Main", in it - "Update by";
5. Download upgrade. If necessary, you will need to enter a password from your account;
6. Update will be installed automatically;
7. Installing the update may take time. Wait for completion. This will inform the corresponding indicator.

You can remove the clock with charging only after completing the update.

Is it possible to connect Apple Watch to Android?

No you can not. Apple Watch with android phones do not work. There is no third-party application that would simulate the corresponding software for iOS.

However, the user community is looking for a different way to bind these two devices. But at the moment the answer to the question "Do Apple Watch work with Android" work "- no, do not work.

Express Guide by Apple Watch Series 2, 3

How to check Apple Watch 2, 3 on authenticity

First, make sure that it is Watch, and not "smart watches IWatch" or something in this spirit.

How to check Apple Watch when buying:

1. Spend a visual inspection. Make sure the housing is deprived of any connectors, including slots for SIM cards or memory cards, charging connectors, etc.;
2. Turn on the device. Make sure it is in principle turns on;
3. Try connecting to the smartphone. If during the primary setup device suggested entering your account data - you can enter. Main: To not be the "Activate Watch" screen.

How to disable GPS on Apple Watch 3

GPS is not turned off. You can turn off on the phone, then the number of geopositioning requests will slightly decrease.

Apple Watch Series 2, 3 do not charge - what to do?

If Apple Watch is not charging, you can try the following:

1. Make sure that the power supply is installed in the outlet and that it has a current. Try another outlet;
2. Make sure the wireless charger comes into contact with the clock, and the magnets leveled it. Try to reconnect. Try to flip the charger;
3. Make sure the chargers (including a wireless module, cable and power supply) are original and supplied;
4. The charging device should not be a transport film on one side;
5. Charger and clocks must be clean;
6. Try to forcibly restart the clock. Press the round and side buttons and hold them within 10 seconds. After rebooting, put on charging again;
7. Try another cable, another power supply, another wireless charger.

If you still do not charge, take them to the service center.

How to reset Apple Watch to factory settings

The easiest way to reset is remotely delete all personal data through the ICloud service:

1. On your computer, open the website icloud.com;
2. Go under your account;
3. Select "Find iPhone";
4. Select your clock from available devices;
5. Click "Erase" and then select "Next" until the process is completed;
6. Also click the Delete button (Pictogram with a cross) next to the clock name.

Through the application a little more complicated. This will be written in more detail in this instruction in Russian (in the section "How to break a couple").

In order to reset the clock (to carry out the so-called "Apple Watch Restore") associated with them, the iPhone must be connected to the Internet for mobile or Wi-Fi.

How to charge Apple Watch without original charging

The third-generation companyon device (Apple Watch Series 3) restricted supports the QI wireless charging standard, so it can be compatible with some chargers. Try to attach it to the rear side to the active charger with QI support for a few seconds. If charging goes - this device can be used.

How to break a couple with Apple Watch 2, 3

Before selling the clock, you will need to remove your own credentials from them. How to untie Apple Watch from Apple ID:

1. Open the Managing Application on the phone;
2. Open the My Watch tab;
3. Open the "Information" menu (indicated by the I symbol in the circle next to the clock name);
4. Select "Broken a pair";
5. If a tariff plan is used, click "Delete Tariff";
6. Enter the password from your account;
7. Confirm your desire to break the pair.

When disdicker also reset to factory settings.

Notifications on Apple Watch Series 2, 3

This may be due to the following:

• Smartphone to which smart clock is connected is now used. Then notifications are displayed on it;
• On the clock is active, the screen lock or the "Do not disturb" mode. Unlock or disconnect this mode through the control location;
• The clock is disabled from the phone. This is reported in the control point of a special icon. Turn on the Wi-Fi and Bluetooth on the phone, and on the clock - first activate the airrest, and then turn it off.

How to unlock Apple Watch 2, 3

To unlock the clock, touch their screen or briefly press any button, and then enter the code-password installed earlier.

How to change the strap on Apple Watch 2, 3

The clock uses special straps with branded fastening. Apply the standard spring, distributed in analog devices, will not work. But for changing the strap, it is enough to remove the old one and install in its place new before the appearance of a characteristic click.

How to remove the strap with Apple Watch

1. Turn the clock with the screen down;
2. Press the strap lock button (located next to the strap);
3. Holding the lock button, slide the strap to the side.

How to turn off Apple Watch

To turn off the clock, press the side button and hold it until the "Off" slider appears, and then slide it.

I think everyone who has already got Apple Watch. or just going to do it understand that this gadget is created to live closely with iPhone.. So to speak, target accessory. The novelty works with all models, starting with the iPhone 5. So, you became the happy owner of the novelties and why start familiarizing and communicating with a new friend?

Step 1. Connect Charger to the clock.

Just connect the supplied charger and fix the magnetic end on the rear panel of the Apple Watch.

Step 2. Turn on Apple Watch.

Hold the side button for 1 or 2 seconds and you will see the Apple logo. After that, select Language. Do not panic if you did not find Russian in the menu. It is really not there. In any case, so far. Nevertheless, all notifications, contact names and other words in Russian accessory perceives perfectly. No cracks.

Step 3. Open Apple Watch application on your iPhone.

A message appears on the clock screen asking you to open the application on the iPhone, which you are prudently installed in advance. All, the process of connection went!

Step 4. Hover your smartphone camera to Apple Watch screen.

In principle, you need to do only what asks the application and everything must be automatically. If suddenly something could not try to do everything manually, which is also very simple. Click "I" ("I") on the display of your novelty and you will see the name of your watches. Then in the application on the iPhone, select this name as soon as it appears. After that, the clock will show you the six-digit code that you want to enter the iPhone application.

Step 5. Considerate with all the terms and create a password.

After all the above mentioned manipulations, you will need to link the device via icloud. You accept all the conditions (choosing that you do not have - money is paid), create a password - everything as usual: the harder, the better. And most importantly, you immediately write to the daddy with passwords on your, most likely, iMac or MacBook.

Step 6. Decide whether to unlock Apple Watch through the iPhone.

This question will float on the display of hours on your own. The bottom line is that when the clock on your wrist and work in a pair with the iPhone you do not need to enter the code. Agree? Then take this option. Do not worry if you suddenly change your solution later, it will always be possible to cancel it.

Step 7. Wait for synchronization.

In general, we postpone the watch aside and go to drink a cup of minutes to 10. Meanwhile, all applications installed on the iPhone and, which are optimized by Apple Watch will be in the device's memory.

Step 8. If you need to cancel the pairing and install something else, then repeat all of the above. There is good news: iPhone saves a local backup automatically, so you can restore the database at any time.

Step 9. We use, enjoy and get pleasure from life together with a novelty of Cupertino, or rather, from China.

Apple Watch is a device that is designed to work side by side with an iPhone. This is an iPhone accessory, they have a very close relationship. That is why the Apple Watch setting looks in many ways, like installing the peripheral or software package on your computer. But in this case, you "set the accessory" for your iPhone. After their conjugation, all the necessary applications will also be installed.

Matching smart watches and iPhone is a fairly simple process, but requires some time; Be prepared to spend at least 20 minutes. Also, make sure that Bluetooth and Wi-Fi are enabled on the iPhone, since Apple Watch needs Bluetooth to connect to iPhone. And finally, you have to have an iPhone fifth or later, Apple Watch does not work with other phones.

Step 1: Connect the charger to the clock.
Apple Watch comes fully charged, but to ensure security, simply connect the supplied charger and fix the magnetic end to the rear Panel of the Apple Watch.

Step 2: Turn on Apple Watch.
You can click the side button while holding 1-2 seconds, and you will see the EPL logo. You will be prompted to choose a language. Click on the desired one and continue.

Step 3: Open Apple Watch application on iPhone.
Your watch will now show a message with a request to open the Apple Watch application, which has been pre-installed on your iPhone, a few weeks earlier (if you have already been updated to iOS 8.2 or later). Do it, and now you can start the connection process.

Step 4: Direct the iPhone camera on the Apple Watch screen.
Just do what the application asks: Try it, it should work, and the pairing will be automatically executed. When everything works out, you will see an animated cloud of points that will show the success of the process. If this fails, you can connect devices manually: Click on "i" on the Apple Watch display, and you will see, in the Apple Watch Device name list. In the iPhone application, select the Apple Watch device name as soon as it appears. The clock will then issue a six-digit code that you can enter the Apple Watch application on the iPhone. It is a bit similar to the activation of the EPL TV application.

Step 5: Agree with all the conditions and create a password.
You will be asked to accept license conditions, siri, diagnostics and approve confirm the device using ICloud. These are not options - they are definitely filling. You will also be asked to create a password. It can be four-digit or more. It will protect you if the clock is removed from your wrist.

Step 6: Decide whether you want the Apple Watch to be unlocked by your iphone.
This question will be set in the pop-up window on Apple Watch. Basically, it means that at a time when your watches are on the wrist and are associated with an iPhone, you will not need to enter the password. Tell me "Yes" (you can change your solution later).

Step 7: Wait for the end of sync.
Apple Watch runs through all your applications and download those that are supported by hours (applications for iPhone "contain" Apple Watch applications if they are optimized for hours). The indicator in the form of a filling circle around the Apple logo shows the synchronization process. It can take 10 minutes or more, so put your iPhone next to and connect it to the charger, like a clock, and you can go and drink tea.

Step 8: Voila!

Step 9: If necessary, you can cancel the pairing and repeat it.
If you ever cancel the pairing hours with an iPhone, it will destroy the data, and the repetition will pass, as if it was a clean installation. Then you will need to configure Apple Watch again. The good news is that the iPhone saves a local backup automatically, so you can recover all from the database. This will save the settings, custom dials and something else, but will delete Apple Pay data for safety.

For several years have passed, and during this time, Apple managed to bring the process of setting the clock to the ideal. Now set up the new Apple Watch is much easier than before. Training data is synchronized via icloud, therefore, it has become easier to switch to the old Apple Watch. Moreover, you can connect at once two Apple Watch hours to one iPhone.

This means that you can not disconnect your old Apple Watch from the iPhone while you set up new ones. Thus, no data during the setup will definitely be lost.

If you fully want to go to the new Apple Watch, you will need to turn off the old clock from the smartphone and connect new ones. Below we will tell you how it all is done.

How to turn off oldApple. Watch. fromiPhone.

Step 1: Make sure your iPhone and Apple Watch are close to each other.

Step 2.: Open the application Apple Watch. on the iPhone.

Step 3.: Select the tab My watchAnd then select your watch.

Step 4.: There will be all Apple Watch connected to your iPhone. If you do not have a clock, click on the icon " i."Next to those you want to disable.

Step 5.: Click Break a couple of S.Apple. Watch..

Step 6: Now enter the password from your Apple ID.

Wait until your Apple Watch will reset, erase the entire content and reboot.

how reset Apple Watch.without iPhone.

Step 1: Go to the app Settings on Apple Watch.

Step 2.: Go to Maintenance-> Reset.

Step 3.: Select Erase content and settings.

Step 4.: If necessary, enter the password.

Step 5.: When the reset will be completed, go to the site icloud.. com. On the computer and disconnect the Activation Lock. To do this on the website icloud go to Settings and in the section My devicesselect your Apple Watch. Click the icon " X."Next to the clock to remove them. Then confirm your action.

how tune new Apple Watch.

Step 1: Hold the side button Apple Watch to enable them. If the clock does not turn on, they need to be charged.

Step 2.: Apply your iPhone to Apple Watch. A window will appear on the iPhone with a proposal to link the smartphone with Apple Watch. Click Start creating a pair.

Step 3.: Animation will appear on Apple Watch. Hover your iPhone to the clock so that the animation can be seen.

If it does not work, click Create a couple of C.Apple. Watch. manually And use the password.

Step 4.: After some time, authentication will end, and Apple Watch will start setting up.

Step 5.: Now you need to choose whether you want to restore these Apple Watch with a copy or configure them as new ones.

Step 6.: Then take the conditions and agreements and log in to your Apple ID.

Step 7.: Set the basic functions to your discretion.

Step 8.: Create a password. This step can be skipped, but if you are going to use your Apple Watch for Apple Pay or Unlock Mac, then the password is to install. By default, you need to enter a password of 4 characters, but you can choose a password of paragraph from 6 characters that will be more reliable.

Step 9.: If you have an Apple Watch with a cellular connection, you will see the instructions with the process of its settings.

Step 10.: Now the application time has come. Here act on your discretion. If you select Install everythingAll available iOS applications will be installed on your Apple Watch.

You can click Choose laterAnd then install only the necessary applications manually. So you will not immediately take the memory of your watches.

Step 11.: Now just wait until all the data is synchronized. The main thing is to keep your iPhone near Apple Watch. When synchronization is completed, you will hear vibration and audio notification on the Apple Watch.

That's all your new Apple Watch are ready to use!

Do not miss Apple news - subscribe to our

How to untie the Apple Watch from the iPhone (break a pair): 3 ways. How to create a couple with Apple Watch second time

How to create a couple with Apple Watch. How to connect to iphone or ipad

If you have already become the owner of smart clock from Apple, then you should connect your Apple Watch to the iPhone in order to take advantage of all the functions of the clock. This article will tell you how to create a couple with Apple Watch. Also here you will learn how to connect the clock to the iPad tablet, how to check the availability of connection between devices and what to do if Apple Watch do not see the iPhone and the connection between fails.

How to create a couple with Apple Watch - the creation process

There are 2 ways to create a pair of Apple Watch, iPhone - automatic and manual. The first way to combine gadgets faster and easy, for him you will need:

If it is not possible to automatically create a pair (the camera does not work on the smartphone, other problems) you can do everything manually. How to connect Apple Watch to iPhone in manual mode:

1. Place both devices next to each other.
2. Turn on your iPhone Wi -fi, or mobile network.
3. On the iPhone screen, click the Watch Application icon.
4. Turn on the "start creating a pair" function.
5. Next, select Manual Setup Mode at the bottom of the screen.
6. Touch the symbol "I".
7. Now the iPhone must see your watch.
8. Next, simply follow the instructions of the program.

What iPhone does Apple Watch?

It all depends on what is your model of the clock, but one thing you can say for sure - you can't connect even the earliest model of smart clock from Apple to the iPhone model younger than 5s. Also, a prerequisite is the presence of the IOS operating system.

Apple Watch Series 3 (GPS) and all the earlier hours of the clock will work with iPhone 5S, or late models of the phone with the latest version of iOS.

Apple Watch Series 3 (GPS + Cellular) will work only with iPhone 6, or more modern device (7, 8, x) with the latest version of iOS.

How to check the connection between Apple Watch and iPhone?

You can check the availability of the connection in two ways - with the clock, or on the phone screen.

To check the connection on the clock display you need to open the "Control Center" for this, make a picture of the main screen from above - down. If the icon of the crossed iPhone appeared in the upper left corner of the clock, or the red cross, which means there is no connection between devices. When using the Watch application on your iPhone to check the connection, you should go to the application, and open the Clock tab, there will be information about the availability of the connection.

How to connect to iPad?

The principle of connecting Appl Watch to the Apad tablet is no different from the method of connecting to the iPhone smartphone to familiarize yourself with whom you can be higher in this article.

What if Apple Watch does not see the iPhone?

The first thing to be done in this unpleasant situation is to check the availability of connection, as described above in this article, if there is no connection means the problem is precisely in this.

The manufacturer of smart watches offers several ways to solve this problem to choose from.

First method: re-connection

Repeat Apple Watch clock connection to iPhone. So that everything goes to successfully make sure that the devices are close to each other, it is also worth sure that the iPhone is connected to Wi-Fi and Bluetooth, and the "air mode" was opposite turned off. To do this, open the bottom curtain of the device, shutting the screen from the bottom up. Note Round images of Wi-Fi and Bluetooth? They must be active, the image of the aircraft must not be active.

Next Check Apple Watch dial. If you find an airplane icon, then the "air mode" is on on the clock. In this case, go to the control location, for this, make the dial from the bottom up and turn off the air mode by clicking on the aircraft symbol.

Finally, restart the Apple Watch with the iPhone.

If and after that it fails to restore the connection to the second method.

Second method: gap and re-creation of communication between Apple Watch and iPhone

1. In the clock settings, you should open the "Settings" then select the "Basic" tab and click "Reset", then "Erase Content and Settings".
2. In the Apple Watch application on your iPhone you need to choose "My Watch" and click on the clock at the top of the display. Next to the clock symbol will be the icon in the form of the letter "I", click on it and select "Broken Pair with Apple Watch". Click you need two times to confirm the action.
3. Now create a pair between Apple Watch and iPhone re-adhering to the instructions above.

Third way: those supporting Apple

If not one of the above methods does not work, it is recommended to contact Apple support service on the manufacturer's official website, or in Restore stores, or in the absence of such an opportunity to the service center. Do not attempt to eliminate problems in the connection associated with damage to the devices yourself.

myAPPles.ru.

How to create a couple with Apple Watch re-

How to connect an Apple Watch to the iPhone. Full instructions.

Apple Watch - Setup and first impression

mI Band 2 does not connect, synchronization Fitness bracelet with telephone

Xiaomi Mi Band 1S is not connected / not synchronized solved the problem simply!

Why doesn't the phone sees a bluetooth headset

iFHONE 8 Commercial Leaked!

Gopro Hero 4, 5 and 3: how to connect the Gopro camera to the iPhone (iPhone) and update the firmware (Firmware)

New life of old TV: the possibilities of modern media players

How to connect Sony SmartWatch if they are not supported by your smartphone

GoPro Hero 4 - how to connect to the phone - # 31

Also see:

• How to set a melody for iPhone
• How to transfer photos from iPhone on a laptop
• Message iPhone that is
• How to reset the password on the iPhone App Store
• Installing Mac OS on MacBook from Disk
• Download vfeed as on iPhone for android
• How to throw a photo from the camera to iPhone
• How to confirm mail on iPhone
• How to download the old version of Skype on iPhone
• iPhone 4 is not included in DFU Mode
• How to clean the iPhone from scratches
• How to set up a bank card in iPhone
• How to return the photo on iPhone after updating
• How to configure screen resolution on iPhone 6 Taiwan
• The screen burns in blue on iPhone

Home »Choosing» How to create a couple with Apple Watch re-

iphones-4g.ru.

How to start working with Apple Watch, create a pair and synchronize them with iPhone

If you have already managed to buy Apple Watch or just going to do this, from this instruction you will learn how to make an initial setup, create a pair and synchronize Apple smart watch with iPhone.

Although Apple Watch official sales started only on April 24, at the beginning of March, Apple released the final version of IOS 8.2, in which the new Apple Watch application appeared, allowing you to create a pair between Apple and iPhone smart clocks. In addition, Apple Watch can be used to perform some smart clock settings and data synchronization between them and smartphone.

Initial setup Apple Watch

1. To start using Apple Watch you need to synchronize them with an iPhone 5 or later model with iOS 8.2 firmware or later. Go to "Settings" -\u003e "Bluetooth" on your iPhone and make sure Bluetooth is turned on.3. Make sure your iPhone is connected to Wi-Fi or Cell Network.4. Turn on Apple Watch. To do this, press and hold the button on the side of the clock (next to the Digital Crown wheel) until you see the Apple.5 logo on their screen. Select and set the language on your Apple Watch. You can scroll through the list of languages \u200b\u200busing swipes on the screen or wheel Digital CROWN.6. After that, on the Apple Watch screen, a window will appear, offering you to start the Apple Watch application on iPhone.7. Make sure the Apple Watch and iPhone are charged, and are located next to each other.

How to automatically create a pair of Apple Watch with iPhone

3. Align the yellow viewfinder on the iPhone display with the animation on the Apple Watch screen.

4. As soon as a message appears on the iPhone display that the pair is created, click on the "Configure as New Apple Watch" button.

5. Depending on what hand you carry the clock, select one of the two options proposed.

6. Confirm that you agree to the rules and conditions.

7. Enter the login and password of your Apple ID account.

8. Click OK after reading information about geolocation services.

9. Press "OK" after reading Siri information.

10. Click "OK" after reading the diagnostic information.

11. Install the password from 4 characters for your Apple Watch. For more security, you will be prompted to install a long password out of 7 characters. Select the desired option. Please note that the password must be entered on your Apple Watch, and not on the iPhone.

12. Select whether you want the Apple Watch unlocking to the iPhone.

13. Select whether all the available applications are automatically installed on your Apple Watch. You can also skip this step and set them later.

14. After that, on the iPhone display, you will see that the synchronization with Apple Watch is completed.

15. That's all. You made the initial setup of Apple Watch, created a pair and synchronized them with the iPhone.

How to manually create a pair of Apple Watch with iPhone

If for some reason you do not want to automatically create a pair of Apple Watch with the iPhone using the camera, you can create it manually. In this case, simply specify the name of your Apple Watch to initiate the process of creating a pair.

1. Run Apple Watch application on your iPhone.

2. Click the Start Creation Creation button on your iPhone and Apple Watch.

3. Press "Creating a pair manually" at the bottom of the Apple Watch screen, and then on the "I" button, after which the name of your Apple Watch will appear on the screen.

After your iPhone detects Apple Watch, perform alternately all the steps outlined above, starting from step 4.

Apple Watch Instructions

If you have already bought a smart watch Apple or just plan to do, you can use our other instructions for using Apple Watch:

How to start working with Apple Watch, create a pair and synchronize them with iPhoneaka to find and install the application on the Apple WatchCak to delete the application from Apple WatchCak Enable, disable or completely restart Apple Watch

newApples.ru.

Holders of smart watches sooner or later puzzled on the conjugation of Apple's appliances with each other. In 90% of cases, this is the question of how to create a pair of iPhone with Apple Watch. It is not surprising because the company that supplies such a technique has its own characteristics that are talking about the individualization of the approach.

Do not be afraid of pairing or synchronizing smart hours iWatch with iPhone or iPad, because it does not take much time and consists of only a small number of steps.
Photo: How to make Apple Watch Conjugation to iPhone?

Step-by-step instructions on how to connect Apple Watch to the iPhone?

If you connect each step of connecting or synchronizing the smart clock to another Apple device, it will be a step-by-step instruction that will help the newcomer to solve this problem. So, to successfully connect iWatch to the iPhone, you need:

• enable the clock by clicking on the Side button, it must be retained for 1-2 seconds, in a word until the Apple logo appears;
• after the company's icon appears, you will see a message on the accessory screen in which you need to select a language (only 4 of them). Stop on what you know better;
• next, confirmation should be confirmed to create a pair between Apple Watch and iPhone. It must be adopted;
• following the instructions, set the application for smart clock on the iPhone, go to it, select "Create a pair", and it should appear

appleiwatch.name.

How to untie Apple Watch from iPhone (break a pair): 3 ways

If you have a desire to sell your Apple Watch watch (or create a pair with another iPhone), then you will certainly come across the need to untie the device from the iPhone (break a pair). Make it is very simple: you only need to perform a number of simple actions, when you can do it even in the absence of a smartphone.

In contact with

Apple Watch from the iPhone may also need to be needed when the failures in the work of one of the gadgets.

How to untie (break a pair) Apple Watch from the iPhone, if both devices in front of you - Method 1

1. Place both gadgets next to each other;

2. Open Apple Watch on the smartphone;

3. In the window that opens, the "My Watch" menu will be located - it should be pressed on it;

4. After that, click on the Apple Watch item, you must click on "I" on the screen.

5. By clicking on the "Break Pair with Apple Watch" button, you should confirm the cancellation of device synchronization, after which all data about the clock is removed from the communicator.