Asus sonicmaster installing windows 7 from a flash drive. How to reinstall Windows on an Asus laptop? Step-by-step instruction. Preparing for installation

Good day, blog visitors.

Any computer, regardless of its hardware and software used, sooner or later needs a clean installation of the operating system. This is due to various reasons - a new version has appeared, the old one has broken down, there was a desire to remove errors and others. Of course, reinstalling Windows on a laptop from Asus or any other manufacturer will help with all these issues. But today I’ll just talk about the process associated specifically with equipment from this computer giant.

If the installed operating system still allows you to work, you first need to complete three fundamentally important steps:

Prepare the necessary drivers (for video card, network). Having them, it will be possible to find the remaining elements in the future.

Scan your computer for viruses using Comodo Internet Security or AVG AntiVirus Free

Copy documents from the system disk.

If your device no longer allows you to perform the above points, try to find another one that can still be used to do this.

Important drivers for the Eee PC model or any other are located on the official website.

But copying documents from the system drive if the laptop is not working will not be so easy. If the device allows this, we move it to a safe place. If not, open the laptop, take out the hard drive and try to connect it to other equipment. We extract the necessary data.

Creating bootable portable memory( )

It’s worth saying right away that you can reinstall the OS in different ways. Previously, it was popular from a disk, since there was simply no USB memory. Immediately after their introduction, many motherboards did not support such devices. But over time, the ability to carry out the required procedure from a flash drive became available. And today this option often becomes the only one, since many models simply may not have a suitable drive.

We will consider the option without a disk, using only compact portable memory:

BIOS setup( )

Now we need to set the boot via BIOS and some other elements. To do this, we perform a number of actions:

Installation( )

Well, now let's move on to directly placing Windows 8 or any other OS version on the device:

Using the spare area( )

Also on some models, such as x54h, it is possible to use the recovery area. This is some space on the hard drive that makes it possible to restore the system without a removable disk.

As sad as this sounds, today there is a misconception that the problem of how to install Windows 7 on a laptop is quite complex and practically insoluble for the average user. This is partly true, but often such myths have no basis.

Windows 7: first acquaintance

Windows 7 OS is one of the most popular and in-demand systems among computer users. Very often it is installed not so much on stationary computer terminals as on laptops.

Among the versions available for installation, you can find several main assemblies: initial, home basic, home advanced, professional and maximum. Actually, which version the user chooses to install depends only on him. In any case, the problem of how to install Windows 7 from a disk to a laptop has a common solution for almost all models of any manufacturer. The same applies to installing operating systems from USB devices, popularly called flash drives.

General concepts about installing Windows 7 on laptops

As for the answer to the question of how to install Windows 7 from a disk on a laptop, usually there are no special problems here. This is understandable, because laptops, as a rule, are always equipped with optical CD/DVD-ROM drives. So to install the system, it is enough to have the original disk or a copy of it.

In the future, of course, some specific situations may arise, but the same problems, say, how to install Windows 7 on an HP laptop or on a model from another manufacturer, generally appear only at the final stages of the installation process and most often come down to the correct installation of device drivers. This will be discussed a little later.

Installing Windows 7 on netbooks

It's another matter when a user tries to install an operating system on a netbook. This is where the problems begin in most cases. This is due to the fact that netbooks do not have optical drives, and the system must be installed from a flash drive. However, here, as practice shows, the problem of how to install Windows 7 on a Lenovo laptop or some other model also has a general solution.

Here, the fundamental link in the installation process will be the correct recording of the installation distribution image onto a removable USB drive, and this must be done in such a way that the flash drive is bootable, and the launch must be carried out before the start of the existing system, if there is one on board.

Pre-preparation of the disk

Now let's look at some preliminary steps, without which the question of how to install Windows 7 on a laptop cannot be resolved. It’s good if the user has an original disk with a certain version of the operating system. But what to do when it is missing?

In this case, you need to either make a copy of it or burn an installation disk from a previously created image. You can create such an image using any program such as UltraISO or Daemon Tools. In addition, you can use the standard tools of the OS itself and create a boot disk.

The first option looks preferable, since this is how you can create an exact copy of the distribution, which will be practically no different from the original. I think there is no need to explain exactly how this is done, since the process of writing an image to disk is very similar in all programs. Sometimes only the menus and corresponding commands differ. This comes down to using the image burning functions, after which a blank optical media is inserted into the drive, and then the path to a pre-created image file is specified. The image itself is created using the same programs using the appropriate function and saving the image file on the hard drive or in a logical partition.

Creating a bootable USB flash drive

In some cases, for example, the answer to the question of how to install Windows 7 on an Asus laptop (or any other) may directly depend on the device model itself. As is already clear, we are talking about netbooks, although they are classified as laptops. Here you will initially need to create a bootable USB flash drive.

This is done using the above software packages with the only difference that the image is written not to an optical disk, but to a removable USB drive. The pre-imaging remains unchanged. Below we will show you how to install Windows 7 from a flash drive on an Asus laptop. Moreover, this does not apply to any specific model or manufacturer.

Required BIOS settings

In the preparatory process, it is important to understand how to install Windows 7 on a laptop via BIOS. The fact is that when using the default BIOS settings, an already installed OS (for example, Windows XP) will simply ignore the media with the “seven” distribution kit. Here you need to take a responsible approach to setting the priority order of boot devices.

To enter the BIOS, depending on the laptop model and the manufacturer of the BIOS itself, the keys Del, F2, F12, etc. can be used. Now you need to find the Boot section (Boot Sequence) or something similar, where the Boot Device Priority line will be indicated . By default, the first device is the HDD.

If you plan to install the system from an optical disk, the first device you need to specify is the CD/DVD drive. If the question is being resolved, say, about how to install Windows 7 from BIOS on a laptop when using a flash drive, naturally, it is this that needs to be specified as the first priority device. However, sometimes problems may arise in that the USB drive may not be displayed in the settings. The main reason this happens is that the flash drive must be inserted into the appropriate USB port before turning on the laptop (netbook) and calling up the BIOS settings.

After all the settings have been made, you must save the changes before exiting (Save and Exit Setup), after which a reboot will occur. If everything is done correctly, the installation of Windows 7 should start from the selected media.

Start installation and format partitions

So, the start has been made. Don't rush to rejoice. Of course, the installation process is automated. First, as usual, you need to select the system language, time and date format, and then specify the keyboard layout. Let us immediately note that entering the activation key and license is postponed until the end of the process. The fact is that “seven” can work in normal mode for up to 30 days as a regular shareware program.

Now, in the question of how to install Windows 7 on an HP laptop (or on other models), you should correctly choose which version of Windows 7 OS should be installed. This is due to the fact that the license key is designed specifically for a specific assembly and, after installing any other, will not lead to activation of the system simply because of its inconsistency.

Now all that remains is to accept the terms of the installation and use agreement. Next, a window will appear in which there are two types of installation: update and full installation. Almost all experts and users recommend performing a complete installation from scratch (before starting the process, you need to copy the files and folders necessary for the user, since formatting will destroy the data). Another advantage of such an installation is the fact that the new system will not “pick up” system errors or, even worse, viruses from the old one.

Problems arising at the initial stage of installation

The installation wizard will prompt you to select the partition into which the new OS will be installed. It will need to be formatted. And as it turns out, it is at this stage that the question of how to install Windows 7 from a flash drive to a laptop (or from an optical disk) may seem insoluble, since the system flatly refuses to perform the formatting operation, and sometimes also indicates that formatting requires hard drive driver.

Let us say right away that you should not be afraid of such messages. In fact, everything is connected only with the fact that some hard drives may contain incorrect MBR boot records or errors in disk layout. In some cases, the problem may be due to the presence of different file systems on the disks and their partitions.

You can get out of this problematic situation by running the command line directly during the installation process. To do this, use the key combination Shift + F10. In the window that appears, you must enter the bootrec /fixmbr command, which allows you to restore the bootloader.

Sometimes, in solving the problem of how to install Windows 7 on a Lenovo (or some other) laptop, re-entering the BIOS can help, where in the SATA controller settings you need to change the hard drive access mode from AHCI to IDE.

After this you need to return to the installation. In this case, the problem of how to install Windows 7 on an Asus laptop (as an example) when the error described above occurs should disappear, and you can proceed to directly formatting the disk or partition (you need to click on the “Format” hyperlink below). All you have to do is wait for the process to complete, after which a window will appear indicating the main steps that will be applied during the installation process.

Initial system settings

Once the installation process is complete, the user will be required to enter the laptop name, username (if prompted), and then the product serial number.

After the steps described above, the same answer to the question of how to install Windows 7 from a flash drive on an Asus laptop or an Acer netbook (or even from a disk on other device models) comes down to setting the time zone, time and date. Then, if desired, you can configure the network. If there is no clear certainty in choosing the type of network, you can postpone this process until later.

When everything is done, the system will start for the first time, after which the familiar “Desktop” will appear.

Installing device drivers

But that's not all. You need to understand that some versions of the 7 (especially unofficial ones) are supplied without the necessary driver package. For example, the problem of how to install Windows 7 on an Acer laptop with a full set of drivers can be solved quite simply if, when purchasing the device itself, there was a special disk with drivers among the additional software. This applies to any laptop model.

As a rule, this issue is resolved quite simply. True, the drivers will have to be installed manually if there is no special “Wizard” on the disk, which, upon startup, will install absolutely all device drivers that are present in the laptop itself as components. As you can see, the problem of how to install Windows 7 on a laptop is not as scary as some users tend to describe it. Yes, of course, you will have to pay attention to some specific settings and problem solving during the installation of the “seven”, but a user of any level of training can solve this. As they say, there would be desire and a little patience.

Installing additional utilities

As for additional software, the problem of how to install Windows 7 on a laptop with all the capabilities of the system can also be solved quite simply. You will need to additionally install an antivirus, archiver, codecs, office programs, etc. However, if all this is on the original disk, there is nothing to think about; you should install applications from such a disk (usually Acronis is present as the shell).

It goes without saying that during the installation of the system itself or after finishing the “Wizard”, you can split the hard drive into logical partitions. Today you can find a very large number of utilities for this. Even some disks have their own tools like Partition Magic, etc.

Windows 8 compatibility issues

Finally, one more problem. Let's say we need to solve the question of how to install Windows 7 from a flash drive on an Asus laptop with G8 preinstalled. Version 7 and 8 systems have different file systems. Although it is believed that the “seven” supports the “eight” file systems, in fact this is a conditional statement. In practice, this causes a lot of confusion. A way out of this situation may be to enable Legacy compatibility mode in the BIOS and then convert the G8 partitions from GPT or UEFI to the standard G7 MBR format.

Conclusion

Probably, many have already noticed that the question of how to install Windows 7 on a laptop, although it has several specific points that you will have to pay special attention to, is nevertheless not too difficult. Depending on the laptop model, you may sometimes have to tinker. But if all the settings are made correctly, and the kit also includes the original disk with drivers, there is no need to strain too much.

In this article we will demonstrate a solution to the difficulties that are usually encountered when installing Windows 7 (or other operating systems) on a netbook. For example, we took the ASUS Eee PC 1015pe netbook.

The main advantage of a netbook is its compactness and lightness. This is achieved thanks to the small screen size and lack of CD/DVD drive. The latter fact, in fact, makes it impossible to install the operating system in the usual way from an installation disk. However, fortunately, there are other means.

Creating a Windows 7 installation USB-Flash drive

Let's, first of all, take a point-by-point look at what we need to create a bootable/installation flash drive:

• • USB flash drive
  • Windows 7 x86/x64 installation disk or its ISO image
  • WinSetupFromUSB 1.0 program
  • Second computer or laptop

WITH USB flash drive, we hope everything is clear. If your netbook supports booting from SD cards, - you can write the Windows installer onto it. In our example, we used a USB flash drive.

It is better to have the original installation disk/image, i.e. DO NOT ASSEMBLE. You can easily find original MSDN Windows images on the Internet. They are perfectly “treated”, and you can always find out how exactly on the Internet. PLEASE NOTE that before downloading the image, check processor capacity Your laptop. ASUS Eee PC, for example, is built on the basis 32-bit processor Intel Atom™ N550. For such processors, the name of the installation image must contain the label x86. For 64-bit processors - x64.

We will also definitely need a special program that will turn our flash drive or SD card into a bootable and installation one. In our example we used WinSetupFromUSB 1.0- the most optimal program in all respects.

And finally, we will definitely need a second computer in order to properly prepare the flash drive. We will perform all the actions described in the next section on it.

Step-by-step instructions for creating a bootable USB flash drive

Download the application, unzip it to any folder and run.

At the top of the window, click on the button "RMPrepUSB". In the window that opens, in the “3 BOOT OPTIONS” field, select the first item (as in the picture), in the “4 FILESYSTEM and OVERRIDES” field, specify the system NTFS, then click on the button Prepare Drive and wait until the procedure is completed.

After the flash drive has been prepared by the previous procedure, close the window RMPrepUSB. In the main program window in the field "Add to USB Disk" select line "Vista/7/Server 2008...". Next, paste Windows 7 installation disk into a computer drive or mount his image to virtual drive (). In the WinSetupFromUSB program window, in the line you select, specify the path to the installation files. In our example, we mounted a disk image onto a virtual DVD drive (disk G: in the screenshot).

Click on the button "GO" and wait until the files are copied.

After everything is ready, the following will appear on the flash drive: Windows installation files 7. Everything, ours installation flash drive and ready!

Booting from the installation USB-Flash drive on a netbook

The next important step is to boot correctly from the installation flash drive. By default, a netbook boots from the internal HDD. You can change this option in BIOS.

Before starting your netbook, make sure that flash drive inserted into USB port. Turn on the computer and at boot time click on the BIOS launch button. When loading you will see the following message: "Tap (key) for Setup" or “Press (key) to enter BIOS”. On ASUS laptops this is the key F2. On other netbooks, the BIOS can be launched using keys F10, Delete and etc.

So, in the BIOS we need a section "Boot"(loading). In the ASUS Eee PC BIOS, first of all, you need to set the boot order from storage devices (priorities for internal-external hard drives, flash drives, SD cards, etc.). Click on the option "Hard Disk Drives" and in the window that opens, first indicate your Flash card.

Return to the main window and on the tab "EXIT" select option "Save Changes & Exit"(“Save changes and exit”).

The next time you turn on the netbook, it will boot from our installation flash drive. You will see this window:

This is the so-called bootloader installed by the WinSetupFromUSB program on our flash drive. Select an item “Start Vista/Win7/Server 2008 Setup Or PE/Recovery ISO from partition...” and press ENTER.

Finally, you will see the long-awaited Windows installation window.

Conclusion

You can intuitively understand how to proceed next by following the prompts on the screen. However, let me remind you of one important detail. After all installation files have been copied, the computer will restart. Don't forget to remove the flash drive, otherwise the computer will boot from it again and you will again see the initial Windows installation window. If this does happen, don’t be alarmed. Just remove the flash drive from the USB port and reboot your netbook. Windows installation will continue on its own.

As always, we hope that our article helped you. We are waiting for likes, reviews and comments!

Almost all modern laptop computers (except Apple) use an operating system from Microsoft. Sometimes a situation arises in which it is necessary to reinstall the OS, so it would be useful to know how to reinstall Windows 7 on a laptop or netbook. You can use several options for launching the program.

How to reinstall Windows 7 on a laptop using built-in tools

A situation arises when there is a need to reinstall Windows 7, but there is neither a licensed DVD nor a flash drive on hand to which you can copy the system files. On all laptops, be it Acer, Asus or Lenovo, you can run a recovery or OS installation using a disk image. It can be created in advance or found on the Internet, but it must be stored on the computer, and the laptop itself must be turned on.

Reinstalling Windows 7 on a laptop requires special programs that can recognize images, these include:

• Diamond tools;
• UltraISO.

To do this, mount the image into this program and run the file with the .exe extension. If windows is simply archived, then there is no need to unpack it. Open the repository using winrar or winzip, again find the same executable file ending in .exe. After clicking on it, the standard process of reinstalling the operating system will begin.

How to reinstall Windows 7 from a flash drive or disk

In cases where the laptop cannot boot the OS on its own, you should use another computer to create the installation media. Before installing Windows on a laptop from a flash drive, you need to find an image and prepare the drive for writing files. If you have a licensed DVD, the process is much simpler, but there is an option that allows you to create it yourself.

Preliminary preparation of software for OS installation

To make bootable media from a DVD or flash drive, it is not enough to simply copy files or an image onto it. To do this, you should prepare the necessary version of Windows itself, using utilities to make an installation CD or flash drive. For the whole process you will need:

1. The Windows 7 program itself.
2. DVD or flash drive minimum 4 GB.
3. ImgBurn utility or Windows 7 USB-DVD Download Tool.

Creating a bootable USB flash drive or disk

If you have a DVD-rom, reinstalling Windows 7 on your laptop can be done through it. You will need a Windows image and the ImgBurn utility, which can be easily found on the Internet. The creation process is as follows:

1. Insert a blank DVD.
2. Launch the ImgBurn program.
3. In the window, select “Browse” and specify the path to the OS image.
4. Do not set the maximum speed for recording; it is better to select the minimum.
5. After recording, a window will appear, you need to click “Ok” and the finished disc will jump out of the device.

Many models of modern laptop computers and netbooks no longer use CD-ROM, so it is useful to be able to reinstall Windows 7 on a laptop using a USB flash drive. The process for creating installation media is as follows:

1. Insert the drive.
2. Launch the Windows 7 USB-DVD Download Tool.
3. In the window, select the path to the system image file.
4. Next, the program will prompt you to select from the menu what you need to create: DVD or USB Device. Choose the second one.
5. Specify the path to the drive.
6. The utility will warn you that all data from the media will be lost. Agree and the creation of the installation flash drive will start.

BIOS setup

To restore or reinstall Windows 7 on a laptop, you need to change some settings in the BIOS. First, restart your computer, and at the initial boot screen, press “del” (works for most models, but F8 sometimes works). The mouse does not work in this system, so all actions must be performed using the arrow keys on the keyboard. When going into BIOS, do the following:

1. In the "Boot" section, find the "Boot Device Priority" section. This setting will indicate where to start the system from.
2. In the menu, make sure that USB DEVICE is first in the list in order if you are using a flash drive or your CD-Rom if it is a disk.
3. Press F10 and confirm that you want to save the changes.

Installing Windows 7

After all the steps described above, the installation will begin. The developers tried to make sure that the user does not experience any inconvenience and the whole process occurs as automatically as possible. The person will be offered several parameters that he must determine independently, but there are no difficulties with them. The entire installation, search for drivers for the mother card, processor will be performed independently by the system, they are built into the OS and will be immediately installed with it on the hard drive. When reinstalling, the laptop must be connected to power.

Installing Windows 7 from a disk or removable drive has one algorithm. The user will need to follow these steps:

1. Wait until the program copies all the necessary files. How long this will take depends on your PC configuration.
2. Next, a license agreement will appear; you must confirm it.
3. In the next window you will be offered the choice of restoring the system or performing a complete reinstallation. It is worth choosing the second option.
4. At the next stage, you need to select a partition on which the OS will be installed. As a rule, select section C; all personal data from it will be deleted.
5. Confirm your choice, and then the system reinstallation process will begin.
6. During the reinstallation, the computer will reboot several times; after the first time, you will need to remove the bootable media and then reinsert it.
7. At the end there will be several parameters that need to be set: time zone, if desired, set a password for the account, enter the license key.
8. The utility will carry out all other actions independently.

OS setup

All further setup of Windows 7 is that you need to install additional drivers; as a rule, they are included with the computer. Please note that all programs that were previously installed will not work. When reinstalling, you can leave all drives untouched except drive C, this will allow you to save some of the data, but if you wish, you can completely format the entire hard drive. This is relevant if the problem is caused by viruses or malware that could not be found and removed.

Video instruction: how to install Windows 7 on a laptop

Found an error in the text? Select it, press Ctrl + Enter and we will fix everything!

It all started when the above-mentioned laptop was purchased, and the task arose of installing Windows 7 on it.

Purchased without an OS, namely Windows 7, because... So far this is the “corporate standard” and some old programs in the eight or ten do not work very correctly.

I’ll say right away that the beech is designed for Windows 10. The included driver disk contains exclusively drivers for Windows 10. The official website also contains drivers exclusively for this OS, 64 bits at that.

Uncle Yasha brought it to the forum, where it was quoted that, supposedly, this line and the adjacent one are “hardware compatible with Windows 7.” “This is unfortunate,” I thought. No, in principle, I read that it does not support even before purchasing, but the price-quality ratio of the device turned out to be very attractive, and a certain sporting interest appeared. I think I really can’t overcome it?

In general, the word “instructions” in the title is not accidental - this time I won. And now everything is in order.

Preparing the laptop for installing Windows 7.

On various technical forums they write that under no circumstances should you update the BIOS before installing Windows 7 on this unit. It's entirely possible that they're right, I'm just not a fan of doing it without good reasons. If you have already updated, you need to “age” it, i.e. roll up an earlier firmware. People tried, they say, they don’t get it.

To install Windows 7 on this unit, you need to go into the BIOS and select strictly “non-UEFI” devices as bootable ones. Otherwise the installation will not work. After this, the installation will go like clockwork.

Installing drivers

After the OS is installed, you need to install the drivers. And this is where the fun begins. USB ports, including those that are USB 2.0, do not work, so we immediately forget about flash drives, external hard drives, etc. CD/DVD only. If you have the DRP burned onto a DVD (it can fit on a dual layer film), then you don't have a problem.

If you haven’t bothered with purchasing and recording a blank with DRP, then here’s a simple and elegant solution: take an existing CD and install from it... a driver for Wi-Fi. I think there is no point in explaining further - download DRP and install all the missing drivers.

Now criticism may fall on me, like, why invent something when you can just remove the hard drive and write to it?DRP. I answer. Anyone who wants can do so, I don’t limit it. I try not to poke my head inside the new device, which is under warranty, unless absolutely necessary.

The only driver that doesn’t exist (well, there wasn’t one back then - DRP17) is a driver for a video card and some other crap.

So that you don’t have to look for it, you can take a driver for video, there is also a driver for USB 3.0, but for this garbage... in principle, you don’t need to install anything. This device only works in Windows 8 and higher, provides some security and is not required. If you are annoyed by this uninstalled device, there is a KB fix on the small-soft website... search for it, in general, but I’m already happy with everything:

This is the “Unknown Device” that you can fight with, or you can just spit on it if you are not a perfectionist or a crazy person who is annoyed by any exclamation marks in the device manager.

That's what it's called. You can score ACPI\MSFT0101 in Yandex and read information on the official Microsoft website.

It is quite possible that the described method will also work on related models of Asus laptops, because Their hardware is quite standard, no revolution has occurred, and the problem only comes from the head. Or rather, from the UEFI BIOS, 99% of the settings of which the manufacturer “carefully” hid from us, so that we wouldn’t cheat, but install Windows 10 and not bother with freedom of choice.

I'll tell you a secret, Windows 8 is installed on these systems with a bang, so if there are fans of this OS, this is good news for you.