Firmware xiaomi mi max 128gb official global. Xiaomi Mi MAX firmware. Exit from firmware mode and turn on the smartphone

Xiaomi Mi Max 32Gb runs under the operating system Android 6.0... Its performance is rated 5 out of 5 (in its segment). This smartphone is high performance. Here are the characteristics of the device, instructions on how to reset the settings, flash the device and, of course, how to get root rights on Xiaomi

Root on Xiaomi Mi Max 32Gb

How to get the root for Xiaomi Mi Max 32Gb see instructions below.

Below are the universal programs for obtaining root rights for devices on Qualcomm Snapdragon

(PC needed)
(Route using a PC)
(popular)
(root in one click)

If the superuser (root) rights could not be obtained or the program did not appear (you can install it yourself) - ask a question in the topic. You may need a custom kernel firmware.

Specifications

Type: Smartphone
Operating system: Android 6.0
Case type: classic
Body material: metal control: touch buttons
Number of SIM-cards: 2
Multiple SIM mode: alternate
Weight: 203g
Dimensions (WxHxT): 88.3x173.1x7.5 mm
Screen type: color IPS, 16.78 million colors, touch
Touchscreen type: multitouch, capacitive
Diagonal: 6.44 inches.
Image size: 1920x1080
Pixels Per Inch (PPI): 342
Automatic screen rotation: yes
Camera: 16 million pixels, LED flash
Camera functions: autofocus
Aperture: f / 2
Recording video clips: yes
Max. video resolution: 1920x1080
Max. video frame rate: 30 frames / s
Geo Tagging: yes
nFront camera: yes, 5 million pixels
Audio: MP3
Headphone jack: 3.5mm
Standard: GSM 900/1800/1900, n3G, 4G LTE, LTE-A Cat. 7
Support for LTE bands: 2100, 1800, 2600, 2600, 1900, 2300, 2500 MHz
Interfaces: Wi-Fi n802.11ac, Wi-Fi Direct, Bluetooth 4.2, IRDA, USB, NFC
Satellite Navigation: GPS / GLONASS / BeiDou
A-GPS system: yes
DLNA support: yes
Processor: Qualcomm Snapdragon 650
Number of processor cores: 6
Video processor: Adreno 510
Built-in memory: 32 GB
RAM: 3 GB
Slot for memory cards: yes, up to n128 GB (combined with a slot for a second SIM card)
Battery type: Li-Ion
Battery capacity: 4850mAh
Battery: Non-removable
Charging connector type: micro-USB
Speakerphone (built-in speaker): there is control: voice dialing, voice control
Flight mode: yes
A2DP profile: yes
Sensors: light, proximity, gyroscope, compass, fingerprint reading
Flashlight: yes
Package contents: smartphone, charger, USB cable, SIM clip
Features: processor - 4 cores 1.4 GHz Cortex-A53 & 2 cores 1.8 GHz nCortex-A72
Announced date: 2016-05-10
Sales start date: 2016-05-17

Firmware for Xiaomi Mi Max 32Gb

Official firmware Android 6.0 [stock ROM file] -
Xiaomi custom firmware -

The firmware of Xiaomi Mi Max 32Gb can be done in several ways. If the firmware file has not yet been uploaded here, then create a topic on the forum, in the section, specialists will help you and add the firmware. Do not forget to write a review of 4-10 lines about the smartphone in the subject line, this is important. The official Xiaomi website, unfortunately, will not help solve this problem, but we will solve it for free. This Xiaomi model has Qualcomm Snapdragon 650 on board, so there are such flashing methods:

Recovery - flashing directly on the device
A special utility from the manufacturer, or

We recommend the first method.

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and disadvantages of a smartphone from Xiaomi and how to fix them?

If Mi Max does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If it freezes when updating / freezes when it is turned on (needs a flashing, 100%)
Doesn't charge (usually iron problems)
Doesn't see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
Sensor does not work (depending on the situation)

For all these problems, contact (you just need to create a theme), specialists will help for free.

Hard Reset for Xiaomi Mi Max 32Gb

Settings-> Recovery and reset
Reset settings (at the very bottom)

How to reset your pattern

How to reset your pattern if you have forgotten it and now you cannot unlock your Xiaomi smartphone. On the Mi Max 32Gb model, the key or PIN can be removed in several ways. You can also remove the lock through a factory reset, the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

The high-end smartphone from the Chinese manufacturer Xiaomi Mi Max has successfully established itself in the Russian market and remains relevant to this day due to its characteristics. Featuring a 6.44-inch FullHD display with Adreno 510 graphics accelerator, 6-core Snapdragon 650 processor with a frequency of 1.8 GHz, even compared to newer models, it continues to have many advantages.

Since any smartphone needs a flashing one way or another, Mi Max is no exception. In general, the firmware instructions in this case will be the same for variations in both 16 and 32 GB.

Since with very good data, the firmware used in it with version 7.8.11.0 is already considered somewhat outdated, you need to know how to fix this defect yourself if you do not intend to contact the service center. It should also be borne in mind that this model has official firmware versions of international importance, and this makes the task easier.

The phone battery must be fully charged before using it.

The instructions below for the Xiaomi Mi Max firmware are presented only for installing the official international (global) versions of smartphones that have a locked bootloader. Before flashing the device, to install a custom version from miui.su or xiaomi.eu, the bootloader must first be unlocked with a custom TWRP recovery installed. From it, in the future, we will carry out the firmware of the smartphone using a file with the .zip extension.

It is also important to take into account the fact that there are several modifications in the Mi Max series, therefore, when downloading the update file, you should pay attention to the file for your specific device by the codename, namely:

Hydrogen - for Mi Max models 2GB RAM and 16GB internal, and Mi Max series 3GB RAM and 32GB internal memory on the Snapdragon platform

After downloading the required version, which we will then flash the phone with, you need to unpack the archive into the body of the root folder, where the Cyrillic alphabet is completely absent in the name. Next, you need to download and install the necessary drivers and software, the MiFlash application on your computer, running it as an administrator.

If it starts correctly, a window will appear on the screen in which you need to click on the Select button, indicating the folder where the previously unpacked firmware file is located. When flashing a smartphone, it is recommended to delete all data for this by returning to the factory settings.

Give gifts

Algorithm of the process

Open the settings in the phone menu and click the section "About the device"By pressing the MIUI version button several times in a row until a notification appears that developer mode is activated.
Go to advanced settings, item for developer and activate factory unlock and USB debugging.
Turn off your smartphone.
Boot your smartphone in EDL (Emergency Download) mode by simultaneously pressing the power and volume buttons up, holding them until a slight vibration appears.
Make sure the screen does not turn on.
Connect the device via microUSB cable to your computer or laptop. If the drivers are in order, the new device will be immediately detected.
We press the update button in the MiFlash program under the name Refresh seeing the detected smartphone appear in the table.
Flash the device by pressing a button Flash and wait about five minutes without touching anything. If everything went well and the process reflashed the smartphone, an inscription will appear on the screen Success.

At the end of the process, we disconnect the phone from the computer or laptop, turning it on by long pressing the power button. Do not panic - the first launch takes about five minutes, this is the norm.

If anyone is not in the know, let me remind you of his brief specifications. The device is equipped with a huge 6.44-inch display with FullHD resolution, a 6-core Snapdragon 650 processor with a clock speed of 1.8 GHz and an Adreno 510 graphics accelerator. using a flash card. I think that this version will be enough for me to appreciate the Mi Max smartphone.

The phone is just excellent, although the firmware version 7.8.11.0, which was installed by the seller, upset a little. Since international firmware versions are officially released on this device, it is not difficult to update yourself without first unlocking the bootloader. At the moment, the latest international stable version is v.7.5.6.0, but since the developer during testing of the new MIUI8 is laying out beta versions for everyone, I chose the latest version 6.7.29 for the firmware. At the same time, I will review the smartphone with the MIUI8 firmware, the final release of which will take place at the end of August.

So, we fully charge the smartphone and proceed.

This manual is intended only for installing the official international (global) version of the firmware on a smartphone with a locked bootloader via fastboot. To install a localized version from xiaomi.eu, miui.su, etc. you must first unlock the bootloader and install a custom TWRP recovery, from under which you can flash the device with a file in .zip format.

There are several modifications of Mi Max, so you need to download the firmware specifically for your device according to the codenames:

Hydrogen - Mi Max 2/16 and Mi Max 3/32 (Snapdragon 650);

Helium - Mi Max 3/64 and Mi Max 4/128 (Snapdragon 652).

Download the desired firmware version and unpack it to the root folder, which does not have Cyrillic in the name. Download and install the necessary software and drivers. Download and install the new beta version of the XiaoMiFlash application and run it on behalf of the Administrator. In the program window that appears, click on the Select button and specify the folder with the unzipped firmware. When updating from an unknown firmware version, as in my case, I recommend installing the firmware with the deletion of all data, for this, in the lower right corner of the XiaoMiFlash application window, you must check Clean all. If you are upgrading from a previous version and do not want to lose files, then you should mark Save user data.

In the smartphone settings, in the About device section, several times click on the MIUI version item until a message appears about the activation of Developer Mode. Further, in the additional settings, go to the For Developers section and activate USB debugging and factory unlock. After that, turn off the smartphone. Now you need to load the device into Emergency Download (EDL) mode, for this, simultaneously press the volume and power buttons and hold until you feel a slight vibration. The screen should not turn on. We connect the smartphone to the PC using a microUSB cable. If all the necessary drivers are installed on the computer, then the following picture should be in the Device Manager.

If everything matches, then in the XiaoMiFlash application we press the Refresh button, after which our device should appear in the table.

To start the software update, click on the Flash button. The flashing process takes 3 to 5 minutes. If successful, Success will appear. If unforeseen situations arise during the firmware, a message with a description of the error will be displayed in the Result column.

"This manual is recommended for use by experienced and knowledgeable users or specialists. This manual will describe the process of flashing a smartphone, it is important to understand that during the flashing all data on your smartphone will be deleted, and we are not responsible for any possible harm that you may cause. your smartphone, all actions you do at your own peril and risk. "

DOWNLOADING SPECIAL SOFTWARE FOR SMARTPHONE FIRMWARE

1. Follow the link to download the program for flashing the smartphone MiFlash
2. Click the link to download "ADB-setup" - a set of drivers for the correct connection of the smartphone to the computer
3. Follow the link to find Xiaomi Mi Max from the list and download the specific firmware for your smartphone 32GB Latest Global Version Fastboot or 64 / 128Gb Latest Global Version Fastboot

Download all these files and unzip them. Unzip the firmware to drive C on your computer, or to another location convenient for you, it is important that the path to the folder with the firmware does not contain Russian letters and spaces

PREPARING THE COMPUTER

Disable driver digital signature verification

1. Open "Start", and there is already "Parameters"

2. Go to the "Update and Security" settings section

3. Go to the "Recovery" menu

4. After restarting the computer, we get to the menu in which we select "Diagnostics" in other versions of "Troubleshooting"

5. After restarting the computer, we get to the menu in which we select "Diagnostics" in other versions of "Troubleshooting"

6. Select "Additional parameters"

7. Select the item "Download Options"

8. And click the "Restart" button

9. In the window that appears, select item 7, to select it, press the F7 key on the keyboard

Then the computer will restart and you will be taken to your "desktop".

Installing the software

1. Installing MiFlash

Open the unpacked folder from the archive and run the MiFlashSetup-Beta.msi file

Next, we indicate the folder where we want to install the program and click "next"

During installation, warning windows may appear, but we ignore them and click "Install this driver anyway"

At the end of the installation, click "Close" (Close). We have installed the MiFlash program

2. Installing the ADB driver

Open the folder with the downloaded driver and run adb-setup-1.4.3.exe

The program will open in the command menu

To start the installation, enter "Y" from the keyboard, and then "Enter" (Enter)

Again we enter "Y" from the keyboard, and then "Enter" (Enter), after which the installation will follow

At the end of the command, the following window will open

The program will ask for permission to install the driver, allow it and click "Install"

At the end of the installation, click "Finish" in the window that appears.

The drivers are installed.

PREPARING YOUR PHONE

For the firmware, you need to fulfill a couple of conditions, for this, on the phone turned on, go to the settings menu:

1. First, we'll enable developer mode.

Find the "About phone" item in the settings menu and open it

2. Now enable USB debugging mode

On the main page of the settings menu, look for the "Advanced" item

Go to the "Advanced" item, and there we look for and click on the "For Developers" item

In the menu that opens, use a swipe to activate "Developer Mode" and below also activate "USB Debugging"

In the window that appears, click "Ok"

TELEPHONE FIRMWARE

1. Launch the MiFlash program (from the folder where you previously installed it or from the shortcut on the desktop)

Now we connect the USB cable to the computer (to the USB connector on the back or to the laptop in this case, to any USB port)
On the switched off smartphone, we simultaneously hold down the "volume +" and "volume -" keys and connect the smartphone to the cable. The smartphone should vibrate, but nothing should be on the screen

2. Then click on the "Refresh" button

3. Our device COM 3 should appear (the number may be different)

Next, click on "Select" (Select) and specify the path to the firmware
We also set the marker before "clean all"

4. After that, press the "Flash" button and the device will start flashing
The firmware will take a long time, please be patient, in our case the phone was flashed for 15 minutes

5. At the end of the firmware, we will see the following:

The device has been updated!

EXIT FIRMWARE MODE AND TURN ON THE SMARTPHONE

1. Disconnect the phone from the USB cable
2. Press the lock button until the phone vibrates, after which the mi.com logo appears on the screen and the phone starts up
3. After updating the firmware, the first launch of the phone may take about 5-10 minutes.
4. When the phone turns on, you will have to go through the "First turn on" procedure

Probably everyone will agree that Xiaomi makes wonderful devices, and not only smartphones. But here we will talk about one of the very popular smartphones Xiaomi Mi MAX. Overall, this is a very niche device and for good reason - just a very huge screen. The screen diagonal is 6.44 inches and this is a truly gigantic display. Not everyone needs such a device, but it found its users. Almost all Xiaomi smartphones have the MIUI operating system and Mi MAX is no exception. MIUI shows itself well on such a large screen, and after the release of MIUI 9, where it became possible to work with two applications at the same time, Mi MAX received even more advantages. Such a large screen allows you to comfortably use several applications at the same time, and the large amount of RAM makes this process very fast and smooth. So MIUI 9 on Xiaomi Mi MAX should be installed at least because of this. And now we will tell you how the MIUI 9 firmware for Xiaomi Mi Max is installed.

Before starting, I would like to add that only you are responsible for all actions with your device. The editors of the site are not responsible for your wrong actions and the resulting bricks as a result of these actions.

Preparatory stage

In general, Xiaomi smartphones are easy to flash. The firmware installation process is highly automated and requires only a few actions from the user:

1) Unlock bootloader

2) Download firmware and MiFlash

3) Install the firmware

Something like this looks like a simplified firmware scheme for any Xiaomi smartphone. The steps must be performed in order and we will begin preparation by unlocking the bootloader.

Unlocking the bootloader

Preparation always starts from this stage. And, in fact, this is a very important stage, without which the firmware simply will not work. If you try to flash your smartphone with a locked bootloader, then, most likely, you will not succeed, since you cannot change the system memory sections. And if you have an officially open bootloader, then you can do whatever you want. You will have no problems with either official firmware or custom firmware. Therefore, we start by unlocking the bootloader. We don't need problems. It is also worth adding that this process is time-consuming because the approval process for your application can take up to 10 days, but usually faster.

Launch Mi Flash Unlock and log in there through your account. We connect our smartphone in fastboot mode (in the off state, hold down power button and volume down) and see that the phone has booted in the mode we need.

The program will automatically recognize your smartphone and suggest unlocking. Press the "Unlock" button. At the end, the program will display a message about successful unlocking by writing the message "Unlocked successfully".

And now your bootloader is officially unlocked and you can proceed to the next stage of our preparation.

Download firmware and Mi Flash

This is definitely the easiest step. Firmware for Xiaomi Mi MAX can be found on the official website. Follow the link and select the version of the smartphone and firmware you need. I would recommend this version: the firmware xiaomi mi max is official global, and if you have a Prime version of the device, then here is your link. The downloaded firmware must be extracted to the root of the C: drive, or to another location, but the main thing is that there is no Cyrillic on the way.

Now you need to download Mi Flash. You can download it. Download and install the application. The necessary drivers will be installed with the program, so you shouldn't have any problems.

At the moment, we have downloaded the required firmware and unzipped it, installed the program for the firmware and the necessary drivers, which means that you can proceed to the last stage.

Xiaomi Mi MAX firmware

On Xiaomi Mi MAX, the firmware is installed using the Mi Flash program, we launch it. Now you need to put your smartphone into fastboot mode - turn off the phone and hold down the "volume down" and "power" buttons. Now you need to connect your phone to your computer via a USB cable (it is recommended to use the supplied cable).

In the running program, click on the "refresh" button and the connected smartphone should be displayed in the program. Now you need to specify the location of the firmware and for this we press the "select" button, in the window that opens, go to the folder with the firmware files. After you specify the location of the firmware, the address should be displayed in the address bar (the line is highlighted in blue). At the bottom, you can select several firmware modes:

Clean all - in this case, all user files are deleted during the firmware, it is recommended to use this particular mode.

Save user data - if you set this flag, then your files will be saved, but in the future there may be errors during the operation of the system, you can use it if you are updating within the same firmware version.

Clean all and lock - in this case, when flashing, a full reset to the factory state will occur: all files are deleted and the bootloader is locked, it is not recommended to set this flag.

Now that you have configured everything and figured out everything, you can click on the "flash" button (highlighted in red) and the firmware of the device will begin. The process may take several minutes. After the firmware is completed, the phone will start to turn on by itself, and the first launch may take a long time.