The Windows 7 network adapter driver does not work. Driver for the network adapter - detailed installation instructions. Downloading the necessary drivers on the Internet

Drivers for the network adapter are needed on any Windows device where you plan to access the Internet. This cannot be done without them.

After installing Windows, you need to install all the necessary drivers. You also need to download it for the network adapter. And this must be done first, because he is responsible for access to the World Wide Web. As a rule, everything you need is downloaded on one device and installed on a completely different one, since, for obvious reasons, there is no Internet there. If you find yourself in a similar situation, we recommend that you use a universal program with a huge range of software that will automatically install the required solution.

How to download a driver for a network adapter without the Internet

Some people believe that the lack of Internet is a stalemate from which it is impossible to get out. Indeed, how to download software where there is no Internet access yet? Don't worry, everything is very simple - you can download a universal program that includes thousands of components, among which there will probably be the one you need. There are several such programs; we recommend downloading them. It is this program that we have posted on this page. You will learn even more information from the video:

You can install what you need in several ways:

Manual installation;
Automatic;

For manual installation, you do not need to download gigabytes of unnecessary data. It is enough to study your computer and understand which network card you are using. For example, Realtek, and then download the appropriate one. All this may not save time, since searching for what you need manually may take a long time.

Dozens of manufacturers produce hardware components. This is the answer why it is impossible to download a universal solution. This is simply impossible, this does not exist. Therefore, download the universal program and transfer the necessary driver to a computer running Windows 32/64 bit on a flash drive.

Internet access requires a properly functioning network card. When installing Windows 7, a standard driver package is also installed, the list of which includes the network one. But sometimes problems arise - either a conflict between drivers and components, or an old version, or a lack of Internet connection. We will tell you how to install a network driver on Windows 7 (including without the Internet), how to update drivers, and what options there are to configure the network card.

Why configure the network card in Windows 7? If drivers are installed incorrectly, the following problems may occur:

No Internet connection. Windows simply won't see the hardware.
Connection failures. At the most inconvenient moment, the network may disappear. Such failures can occur at different intervals, thereby irritating the PC owner with poor performance.

How to install network hardware drivers on Windows 7

This method is used during normal Internet operation - when Windows is able to connect to the World Wide Web. The first question that arises is where to download and how to install the software for the network adapter?

Option two:

use special software (Driver Pack);
or find out the card manufacturer and select software specifically for it.

Each method has its own advantages and disadvantages.

Where can I download network drivers for Windows 7? We recommend downloading software only from trusted sources. Third party resources may introduce malicious software into the package contents.

The interface in Driver Pack is intuitive; the necessary software is searched automatically from a large database. The program will do everything for you - you just need to launch it and make a couple of clicks. The downside is the weight of the utility (more than 10 GB). When you load the driver knowing the manufacturer of the network card, you save disk space. But the disadvantage of this method is the long search for the necessary software. First we'll look at a quick installation using the Driver Pack. And finally, we’ll tell you about a way to find information: what network card you have.

Installing drivers using the Driver Pack utility

“DPS” is a driver package that has proven itself to be reliable, large and easy to install. It includes software for the network, processor, video card, etc. This is the reason why the utility has a significant weight (about 9-11 GB). The developers regularly update the database, so you can safely download the latest edition of the package.

Driver for network adapter installation instructions

Step 1. Download the Driver Pack by following the link https://drp.su/ru.

Step 2. Let's launch the program.

Step 3. The utility automatically finds uninstalled or outdated drivers and offers to install them. When you select the “Set up your computer automatically” option, additional software will be installed along with the drivers, which is visible on the right side of the window.

Step 4. To avoid installing unnecessary things, find the “Expert Mode” option at the bottom of the window and click on it.

Step 5. We tick the software that needs to be installed and press the green button (see screenshot). Done - the driver for the Windows 7 network card has been installed.

If you want to know in more detail, you can read an article about it on our portal.

We install Internet software ourselves

First of all, let's find information about the board itself. Knowing the device model, finding suitable software becomes much easier.

How to find out what kind of network cards are installed in the system?

Step 1. Open "Device Manager".

Step 2. We are looking for an item in the catalog of components (see photo below).

Step 3. Expand the category by clicking on the “+” icon. We see the name of our hardware.

Downloading and installing the driver

Now that we know the manufacturer of the network card, we can begin to manually search for software.

Step 1. We enter the name of the model into the search engine.

Step 4. We choose exactly the program that suits your operating system. The download begins.

Step 5. Open the downloaded exe file.

Step 6. Follow the installer's instructions. Click “Next”.

Step 7 Then we accept the license terms and wait for the software to install on the computer.

How to install a network adapter driver without Internet access

Usually we download software like this: open Google and type in the name of the software. But when there is no connection to the Network, the most interesting thing begins - there is no driver, but you need to download it from somewhere. And to download it, you need a network. You can endlessly wander around this circle. But the problem can be easily solved if you have a good friend or a smartphone. The instructions describe steps to resolve problems with the connection and the global web if Windows 7 does not see the network adapter.

Our task is to use the 3DP Chip program. Alternatively, you can download it to your smartphone, then connect it to your computer via a USB cable and transfer it to your desktop. Or ask a friend to download the program onto a flash drive, from which you can then run the utility on your own PC.

Step 1. Get the program and copy its file to the problem computer. Please note that the developer of the utility has one official website.

Step 2. Launch 3DP Chip.

The software analyzes the PC components and produces a list of software required for installation. If your device is not in the database, the program installs universal software suitable for a wide range of cards.

How to update the network driver on Windows 7. Updating the driver using Windows

Windows has a number of standard programs designed to solve problems. Usually their functionality is enough to solve ordinary problems. The “Device Manager” will come in handy. This application is capable of customizing the operation of all PC components.

Updating the network card driver in the Windows operating system

Step 1. Open “Dispatcher” (see screenshot).

Step 2. A window opens with a list of all the hardware built into our computer. Find the line “Network devices” in the list. If there are several of them, a list is formed that opens by clicking the “+” button located next to the line.

Step 3. Open the network equipment category. Click on the component that requires drivers. Next, select the line “Update drivers”.

Step 4. Windows will offer two options:

download a new version via the Internet (the system itself finds the appropriate version and installs the software instantly);
or find the driver files on the hard drive (flash drive or laser drive inserted into the PC). Here's how to install drivers on Windows 7 automatically in just 5 minutes.

Select the first option with automatic updating. The OS will start searching for software on the Internet and after 5-6 minutes will download all released versions. After completing the operation, we recommend restarting your computer.

Manually updating drivers

This algorithm repeats steps 1-3 from the previous instructions. But instead of automatic updating, we choose the manual method. To do this, you need to download the drivers yourself.

Step 1. We choose the manual method.

Step 2. Click on the “Browse” button - an explorer opens, through which you need to specify the path to the folder in which the drivers are located.

Step 3. Either the system will display a message that the driver does not need to be updated, or the installation will begin. All you have to do is wait until Windows delivers updates. After completing the settings, reboot the system.

Click “Close”

It's no secret that all the necessary drivers for a computer can be downloaded on the Internet. But what if drivers for network adapters are not installed on a freshly installed Windows? To solve this problem, we come to the aid of an offline driver pack of network devices, which can be downloaded to a flash drive and installed in a few clicks, manually or automatically.

Driver packs for network cards and Wi-Fi adapters are presented in 3 formats - zip, exe, 7z.

ZIP- no archiver program is required to unpack files. The Windows system itself handles unzipping files. You can unzip a separate folder if you know the driver manufacturer.
7Z- here, to unpack the files, you need an archiver program, for example 7z or Winrar. You can also unzip a separate folder if you know the driver manufacturer.
SFX archive (EXE)- such an archive can be unpacked on any computer, even in the absence of an archiver program, but here you cannot unpack a separate folder.

It is impossible to imagine a modern personal computer without a network card - a device that connects this computer with other computers on the network. Such a network card (also called a “network controller”) operates on the basis of an appropriate driver that supports the operation of the specified device at the software level. The obsolescence of this driver, failures and dysfunctions in its operation lead to a disruption in the stability of the network connection, or even a complete loss of network access for this PC. Below I will discuss what a network controller for Windows is, as well as where to download it for Windows 7 64 bit.

Features of the network controller driver for Windows

Network Controller Driver (in English version "Ethernet Controller driver") designed to enable sending and receiving data between the controller and the host device. Typically, this is low-level software that receives a request from a host (computer) to send and receive data, and converts the specified request into a form that the network controller can understand. Then this driver for Windows 7 receives the response from the controller and translates it into a form recognized by the host (essentially reminiscent of an interactive bridge). Without these drivers, the Ethernet controller is completely useless as it cannot communicate with the host device. The network controller driver provides data buffering, regulates data transfer speed, and corrects errors that occur during the operation of the network device.

If there are problems with the Ethernet driver, you will see an exclamation mark in the Device Manager next to the network card or ethernet controller (often the problematic controller in Windows 7 is displayed in the “Other devices” section). The appearance of this sign indicates the need to update the driver and correct the dysfunction that has arisen.

Where to download the Ethernet controller driver for Windows 7 64 bit?

There are several ways to download the driver for the Windows 7 64 bit Ethernet controller to your PC. Let's look at them in order:

Use the manufacturer's website

If you are using a branded computer, then you need to go to the website of the manufacturer of this PC (Acer, Asus, Dell, Lenovo, etc.), and look there for the latest drivers for your network card. To find the most current versions, you need to know the model of your PC and the specifics of the operating system (what version of Windows you have and what bitness it is). In particular, such information can be obtained by clicking on the Win+Pause button combination.

If you are using a computer you assembled yourself (or bought in stores like Eldorado), you need to log into the website of the manufacturer of your PC’s motherboard (Asus, Acer, Intel, Gigabyte, etc.), and look there for drivers for your network controller. To find the correct driver, you need to know the model of your motherboard, information on which can be found on the motherboard itself. You also need to identify your Windows OS (its version and bitness)

If your PC does not have an Internet connection due to network card problems, it is recommended to download the mentioned drivers on another PC and then transfer them to our computer using a flash drive or other forms of media. After installing the drivers, network problems are usually resolved.

You can also use the list of drivers for network controllers on the website getdrivers.net.

Use specialized software

An alternative solution to the problem in Windows 7 64 bit is to use specialized software to automatically install drivers at the DriverPack Solution, Driver Booster and other analogues. These software products will scan your computer for missing or outdated drivers and install the latest versions.

Use Driver Booster features

Search by ID

If the first two methods turned out to be ineffective, it is recommended to search for the driver for the network controller by its ID.

To do this, launch “Device Manager”, find our “Network Controller” (Ethernet Controller) there.
Hover the cursor over it, right-click, and select “Properties”.
Then go to “Details”, and here in the “Property” option select “Hardware ID”.
Several values will be displayed below; you need to copy the longest of them, and search through any available search engine for the corresponding drivers, which will remain to be downloaded and installed on your PC.

Conclusion

The best way to download a network controller driver for Windows 7 64 bit and other operating systems is to go to the device manufacturer’s website, where you can download the most current version of the specified software. A good alternative is also to turn to the functionality of specialized automated programs that allow you to restore normal operation of the network controller on your PC.

If we consider the operation of a network adapter, Wi-Fi module or router, users of Windows operating systems may encounter a situation where such equipment stops working due to failures or reinstallation of the system as a whole. Now we will consider the question of how to install a network driver on Windows 7. At the same time, we will briefly touch on the main points of installation and subsequent configuration.

How to install drivers automatically on Windows 7

First of all, don't panic. A driver crash, for example, when re-installing an operating system, is not some kind of critical situation.

Please note that during the process of installing and configuring the system, it automatically installs the most suitable drivers (programs for their correct operation) for almost all devices known today, including network adapters and related equipment. The very essence of the problem, how to install drivers for such devices on Windows 7, comes down to just waiting for the reinstallation and initial setup process to complete. True, after booting the computer at the end of the process, in some cases the driver database may be located not on the hard drive, but on the Windows installation disk.

Using driver updates

If for some reason the driver for the corresponding equipment was not installed correctly, you first need to check in the “Device Manager”, called from the standard “Control Panel”, whether the equipment really does not work (in the list it is indicated by a yellow circle).

Here you can do it in the simplest way: in the context menu, use the driver update command directly or go to the properties section, where you select the button of the same name (this applies to all systems, including even XP).

The system will search for the most suitable driver and report its successful installation or issue a notification that the driver has already been installed. But the most suitable driver is often not the best solution. Therefore, you should use the selection of the location from which the installation will be made.

This is where the Windows installation disc comes in handy. However, for example, if the user is dealing not with a desktop computer, but with a laptop, in order to solve the problem (Windows 7), you need to use a special disk with drivers, which is required when purchasing the device. You understand that, unlike desktop computers assembled by hand, a laptop contains a standard manufacturer configuration that is not changed upon sale.

Here you simply insert the disk into and then specify the location of the required driver installer when the system asks.

Removing a device from the system and reinstalling it

If this option does not suit someone, the question of how to install network adapter drivers on Windows 7 can be solved by removing the device from the system.

When Windows restarts again, the device will be detected automatically, after which you can use the method with the original driver disk.

But this can also be done manually. You need to look through the folders located on the optical media and select a special driver installation file from there in the folder indicating the appropriate equipment (usually these are files with the .inf extension). You can install it on the system by calling the context menu (right click) and using the installation command.

How to install WiFi drivers on Windows 7

As for built-in wireless communication modules and routers, in principle, there is nothing complicated about installing drivers.

Based on the above, you can use all the described methods, but, as a rule, Wi-Fi modules are detected automatically by the system, and for routers, drivers can be found on accompanying optical media. The installation process is practically no different from the standard one. Another thing is when you need to configure the equipment so that it works correctly.

Setting up a router, Wi-Fi and local network connection

For routers, access to settings is used in the form of logging into the browser via the address 192.168.1.1 or 192.168.0.1 (depending on the model - this address can be found on the nameplate on the back of the router, where you can find the login and password for logging in), where the parameters are written provided by the provider.

When all operations are completed, the turned on Wi-Fi module will itself determine the presence of a wireless network, of course, provided that the preliminary installation of a new connection has already been made. The module itself is activated by default. If it is turned off, you can turn it on by combining the Fn button with one of the function keys. For example, on Fujitsu laptops this is Fn + F5. The module will require a login password, if provided, and will then connect.

By the way, for both cable and wireless connections, it is recommended to specify automatic address acquisition in the TCP/IP settings. However, if we are talking about it may very well be that some parameters will have to be entered manually. You can obtain them from your system administrator.

Bottom line

In conclusion, it remains to be said that the question of how to install network device drivers on Windows 7, in general, is not difficult to solve. Only one problem can be noted when there are several in the system that can cause a hardware conflict. In addition, if you don’t have the original driver disk at hand, you can find out the brand of equipment and its manufacturer, and then, using another computer connected to the Internet, go to the manufacturer’s official website and download the latest version of the driver, taking into account the installed “OS” (in in our case - Windows 7 32 or 64 bit).