Display the Home button on the iPhone and iPad screen. What to do if the Home button on your iPhone doesn't work? What is the name of the home button on an iPhone?

In today's world, many people buy products from Apple. For example, smartphones. They are called iPhones. This device offers the owner a variety of control options. Next we will tell you how to display the Home button on the iPhone screen. Why might this operation be required at all? Answering these questions is actually easier than it seems.

When needed

The first step is to understand in what situations it is necessary to display the Home button on the screen. It's no secret that this control element in a smartphone is provided in the form of a separate physical button. It is made of glass, so some believe that the component will not work for a long time on an iPhone.

You need to think about how to display the Home button on the iPhone screen when this control refuses to work. In other cases, it is recommended to use the physical interpretation of the control element.

Withdrawal methods

An important nuance is the choice of how to display the Home button on the smartphone display. Modern subscribers can act in several ways.

More precisely:

use specialized programs;
use system settings.

For older versions of iOS, only the first sentence is relevant. Therefore, if a subscriber is wondering how to display the Home button on the iPhone screen, there is no need to be afraid of third-party programs. But new versions of iOS use mainly hardware settings.

Programs

Now let's talk about each of the options in order. You should start with programs. This method is not used very often in practice, but it does occur. Eliminates many problems.

How to display the Home button on the iPhone? To do this, you need to download, install and run a special program. Nothing more is needed. The completed actions display the Home button.

What application will help bring your idea to life? It is best to use Menu Button Emulator. It does not require additional costs. As already mentioned, with its help you can deal with the task at hand without much difficulty.

Smartphone settings

How to quickly display the Home button on the iPhone screen? This can be done using the settings of your mobile phone. It should be noted that this scenario is only relevant for iOS 7 and newer versions of operating systems. In early builds, only additional applications will help.

How to display the Home button on the iPhone screen? Just use the option called Assistive Touch. It displays a small “Home” button on the gadget’s display, which begins to work together with its physical interpretation.

To use this technique, you must:

Turn on your mobile device. Be sure to wait until the gadget is fully loaded.
Go to the "Settings" - "General" section. There you need to open the "Universal Access" menu.
Find and click on Assistive Touch.
Set the switch to the "On" state.

That's all. Now it’s clear how to display the Home button on the iPhone screen. You can remove this control in the same way. Nothing difficult, unclear or special.

In practice, it is the second scenario that occurs most often. After all, the majority of users use iOS 7 and higher.

AssistiveTouch is a kind of control center for Apple equipment, which allows you to transform “mechanical” interaction with a smartphone or tablet into a touch form. You don’t have to worry about buttons - blocking the device, shaking and scaling - from now on, every single action depends solely on a pre-configured menu of gestures. It's easy to display the home button on the iPhone screen.

Why display the home button on the screen? What is AssistiveTouch?

The virtual Home button, as an auxiliary part of the iOS operating system, performs several tasks at once:

Makes life easier for users with disabilities;
Allows you, at least temporarily, to abandon the physical button located on the body of the iPhone or iPad in cases where it breaks down, malfunctions or malfunctions, needs repair or does not affect the system during use;
Provides access to Siri, Apple Pay and additional menus without using the Power button located on the top or right;
Helps keep the device in its original form, literally refusing to interact with the case. Surprisingly, relearning how to interact through a screen is easy. And, as practice shows, in Asian countries this is how “Power” or “Home” are saved from constant wear and tear. Is it really possible to save yourself from having to pay for repairs? That’s another question. It is unlikely that Apple equipment, when used correctly, will not withstand 3-4 years of stable pressing of the buttons located on the case;
AssistiveTouch is available on all Apple smartphones starting with iPhone 3GS.

Transferring a button to the screen and its settings, calibration

You can display the “Home Button” button on the screen of a smartphone or tablet running the iOS operating system in the “Universal Access” section, where Apple developers have collected a colossal amount of technologies and functions that make life easier for users with disabilities (and some parameters of other technologies, such as 3D Touch, Siri and Face ID). You can get to the section through the settings:

Or more precisely, through the “Basic” menu item;
In the “Universal Access” that opens, it is important to find the “Interaction” thematic panel and go to the AssistiveTouch settings;
First of all, you will have to enable the function by moving the slider to the active position;
The final touch is to configure the required set of capabilities by looking at each set of parameters;
For example, in the “Top-Level Menu” you can change the number of available icons, the location of buttons, and the sections that open. Anyone can set up access to Siri and access to control points and other sections. If there is too much of everything, the changes made allow you to “Reset” with the button of the same name;
Apple developers also suggest setting up ways to interact with the button - if a single press opens a menu, then a double press can quickly lock the device or immediately call SOS;
If for some reason the AssistiveTouch icon looks too bright at rest and greatly interferes with interaction with the operating system, then it’s time to adjust the “Visibility at rest” option. 40% is usually always enough;
By the way, here you can come up with your own gestures to interact with the system. The technology works great, but problems may arise with the settings - the system is not able to count all touches correctly.

AssistiveTouch features

The virtual button located on the screen is almost omnipotent - it opens access to the Siri voice assistant, locks and rotates the screen, changes the sound volume, switches the smartphone or tablet to silent mode, takes a screenshot and displays an extensive multitasking panel, and looks at recent notifications. Each individual action is located in pre-designated thematic sections, which, of course, can be changed and customized at will.

If the listed options are too few, then you should immediately turn to the settings and expand the powers of the on-screen assistant - even simulating some interactions with the device will not be a problem - for example, with one click you can simulate shaking or spreading your fingers to reduce or enlarge the image.

Using AssistiveTouch with 3D Touch

On iPhone models 6s and above, the virtual key responds to 3D Touch presses. Depending on the degree and strength of the touch, AssistiveTouch will perform different actions. Which? Depends on the settings. All gestures can be configured in the same “General” menu, in the “Universal Access” panel.

From the extensive list of available actions, you can choose any one - be it multitasking, quick commands or taking a screenshot. For unknown reasons, the developers do not allow you to adjust the touch depth - only one action with 3D Touch is selected with maximum pressure (no “half” or “light” touch will work, which is a pity - this would make the range of powers even wider!).

How to remove a button from the screen

If the AssistiveTouch technology has ceased to bring at least some benefit, then it’s time to return everything to its previous state by repeating the instructions already described above almost exactly, changing only the position of the peculiar check mark from “green” to “gray”:

Go to “Settings”, open the “General” menu;
Find “Universal Access”, and then, scrolling to the “Interaction” section, find the already familiar item;
The last step is to set the slider to inactive and save the changes;
And one more thing - it is not at all necessary to return everything to the original settings; perhaps AssistiveTouch will still be useful in the near future, and all gestures, clicks and technology will remain in an already optimized and perfected order.

Touch interaction in AssistiveTouch

Recently, Apple developers have been able to create and add their own screen gestures that perform specific and pre-prepared actions (some complex combinations, unfortunately, are not yet allowed - you cannot launch several applications at once or initiate a complex algorithm of actions, only the basics are available to users ”, such as vertical scrolling, swiping and clicking on certain areas).

Gestures are created in the AssistiveTouch setup menu - it is there, in any sequence and for any time, that you can “assemble” a new action by drawing a line, circle or triangle on the screen. It all depends on the specific goals that the gesture and fantasies must fulfill. When work on the gesture is completed, the resulting movement can be added to the “Favorites” item, called up with a normal, single touch of the virtual button. From there, gestures are reproduced at any necessary moment (in fact, the system only simplifies monotonous actions, you shouldn’t expect complex algorithms from a standard on-screen assistant - you can’t create a bot using AssistiveTouch that can extract experience and gold in any MMORPG - you can only dream about this ).

These instructions will help you replace the home button on your iPhone 5s yourself.

Note that Touch ID can only work with the factory-installed button. If you replace the home button yourself, you will not be able to unlock your iPhone using your fingerprint. Only a replacement at an official Apple service center can retain Touch ID functionality. .

This instruction is a translation of the article: https://www.ifixit.com/Guide/iPhone+5s+Home+Button+Replacement/24983.

We also have instructions on how if you're interested.

Warning

This article is not a guide to action! All responsibility for collecting and disassembling your device lies with you.
Many manufacturers do not bear warranty obligations if the device has been disassembled by the user. If you do not want to lose the warranty for your device, check the terms of the warranty in the documentation or with the device manufacturer.

Tools used

TS1

If your iPhone screen is broken, then first seal it with tape so as not to damage yourself and the phone with small shards of glass.

Apply several strips of tape until you cover the entire screen area. First of all, this will protect you and the phone from small fragments, and secondly, it will help maintain the integrity of the screen when we take it out of the case.

I highly recommend using safety glasses and gloves. Getting glass shards out of your eye is a very unpleasant task :(

Turn off your phone before starting work.

Next, remove the two 3.9mm Pentalobe screws that flank the Lightning connector.

Use a suction cup to remove the screen module. Place the suction cup on the screen near the home button and press down until the suction cup sticks and holds well.

The display module is held in the case with latches and is also connected to the motherboard by several cables. One cable is located under the home button, the rest are at the top of the iPhone. Your task is to open the iPhone just enough so that you can disconnect the cable under the home button.

Don't rush, this procedure may take some time. The iPhone 5S display is fixed quite firmly in the body. Do not try to open the phone completely at once; do not forget about the cable.

As soon as the display is held only by the cables, you can remove the suction cup, to do this, pull the tab on the suction cup, or, if there is none, lift one edge of the suction cup with your fingernail.

We're filming...

Now we lift the display module from the side of the “home” button just enough so that the cable can be disconnected.

Do not raise the screen too high, you may damage the cable or connector. The cable must not be stretched.

Use tweezers to remove the bracket from the connector.

During assembly, install the bracket correctly. The side with the small tooth should be facing down the device, and the side with the two slots should be facing the battery.

Use tweezers to disconnect the cable connector from the connector on the motherboard.

Make sure that the connector on the cable is actually disconnected from the connector on the motherboard. The connector on the motherboard is glued and can be pulled off the motherboard if you are not very careful, but the connector itself will still be connected to the connector on the cable.

After the home button cable is disconnected, open the phone 90° from the home button side as if there was a hinge at the top of the phone.

During the next few steps, keep the screen raised 90° as shown in the picture.

Unscrew the screws marked with circles:

1.7mm Phillips #000;
1.2mm Phillips #000;
1.3mm Phillips #000;
1.7mm Phillips #000 head screw. This screw is not magnetized with a screwdriver. Don't lose it.

It is very important not to mix up the screws during assembly. If you use a 1.3mm or 1.7mm screw instead of a 1.2mm one, you can cause serious damage to the motherboard and brick the iPhone.

Do not overtighten the screws. If the screw does not go easily, then you may have made a mistake, do not use force.

Remove the protective screen.

Using a spatula, disconnect the connectors of the selfie camera and sensor cables.

Keep the screen raised at 90°. Now disconnect the cable from the display.

During assembly, the display connector may not snap fully into place and you may see white lines on the screen when the iPhone boots up. If this happens, unplug the display connector and plug it back in, then restart your iPhone. The best way to reboot is to disconnect the battery for a few seconds.

Now disconnect the touch screen connector.

Now you can remove the screen.

On the back of the screen, remove the single #000 Phillips head screw that holds the home button in place.

The unscrewed screw is fastened to the cable with a clasp with a spring contact. During assembly, make sure that the contact spring is installed, as before, between the screw and the screen.

Bend the train.

Remove two 1.4mm Phillips #000 head screws.

Remove the bracket that holds the home button.

Place the spatula under the cable coming from the home button. The cable is slightly glued to the display module.

Gently move the spatula left and right to unstick the train.

Do not remove the button yet; it is still connected to the display module.

If necessary, remove some of the tape you placed initially on the outside of the display.

Gently press the top left corner of the button from the outside.

Do not try to squeeze out the entire button at once; your task is to release only one corner, and then insert a “spatula” there and pry it off.

The membrane around the button is very thin, if you think it is about to break, heat it up a little with a hairdryer and try again.

Remove the button from the display module by carefully prying it up and bending it using a spatula.

Like this…

The button has been removed. You may need to transfer the rubber boot from your old button to the new one.

Using tweezers, carefully remove the rubber band from the button. The elastic is very thin and very easy to tear. If you feel like you might tear it, heat the button with a hairdryer and try again.

Many owners of Apple equipment are faced with a situation where the iPhone Home button does not work. The Home key on Apple devices is made of glass, which is susceptible to various external influences. Careless handling of the device or its fall from a height lead to damage to the Home button on the iPhone. In case of some malfunctions, you can repair the button yourself.

Check the function of the key

To check whether the Home button on your iPhone works or not, press it at least ten times in a row. If there is no response to at least a couple of presses, then there is a malfunction that affects the functionality of the key.

The main reasons for the failure of the Home key

The Home button may break down completely or stop working periodically for a variety of reasons. Most often, the iPhone Home button does not work due to:

mechanical damage
moisture getting inside the case of an Apple smartphone
software failure

If the Home key on your iPhone stops working, most likely, software or an application of poor quality was previously downloaded to your phone.

The Home button may break if you drop your new Apple smartphone or put strong pressure on it. Situations also arise when the button may break, as a result of which it stops responding to pressing or begins to periodically slow down after moisture gets inside the mechanism. In this situation, when you press the button, you will hear a creak, indicating oxidation of the contacts.

Fortunately for many owners of Apple gadgets, problems directly related to mechanical damage and liquid ingress are not so common. Most Home button failures occur due to a system failure. Because of it, the key does not work well, periodically slows down or completely loses its functionality. In this case, the time and cost of repairs will be insignificant.

How to revive a phone

If the Home button on your device works intermittently and does not always respond to presses, do not be upset. Once you find the root cause, you can use several methods to restore the Home button to its former functionality. These include the following:

calibration
changing the position of the keystroke connector
dry cleaning buttons
displaying the Home button on the main screen using a special program

How to calibrate if a key is faulty

To check whether the problem with the Home button on an iPhone is due to a software glitch, you should calibrate the key. To restore the functionality of the Home button on iPhone, do the following:

activate any application on iPhone, for example, Clock or Calculator
press and hold the Power button until the power off slider appears on your phone screen
Release the Power key and press Home until the power off slider disappears from the screen

10 seconds after pressing the Home key, the system will calibrate the button. The problem after this procedure will be resolved if there was a software glitch, and the Home key to the main screen on your device will work as before.

Features of adjusting the connector on iPhone

If you are the owner of an iPhone 4 and 4S and are faced with a faulty button on your smartphone, do not rush to change it. The situation can be corrected by changing the position of the connector. For this:

connect the cable that came with your device to the phone
press the plug where it fits into the connector, and simultaneously press and hold the Home keys

Now disconnect the cable and check if the cause of the problem has been eliminated and if the button works. If the problem cannot be resolved, you can use another method to restore the functionality of the Home key to the main screen.

Chemical method to solve the problem

Often the reason why the Home button on an iPhone malfunctions is due to dirt and dust particles getting inside it. This also happens after liquid, for example, sweet drinks, gets under the body of an old or new smartphone, or if the device is taken with dirty hands. An effective way to quickly eliminate the problem in this case is to use chemical cleaning agents. This could be isopropyl alcohol or WD-40. To use this method to solve the problem, perform several manipulations:

drop a small amount of product onto the Home key on the home screen
press and hold the key until the cleaning agent penetrates inside
check operation Home after the alcohol has completely evaporated

Apply the chemical only to the key and not to the screen. Careless handling of the cleaning product can cause damage to other parts of the phone, which will increase the cost of repairing your Apple device.

Enabling a virtual button

The steps presented above allow you to determine the cause of the key malfunction and eliminate the breakdown. If your phone or its button has been subjected to strong physical impact, dry cleaning, calibration and adjustment will not solve the problem. The way out is to turn on the virtual button and then display it on the iPhone screen.

To replace a faulty key with a virtual one, you need to go to settings, find the Assistive Touch section, and enable the function here. A new icon will appear on the screen. When you click on it, a special menu will open, in which you can control your old and new smartphone without the Home key. This method will help with any reason for the breakdown.

If it so happens that your phone’s “Home” button, “Power” lock button or volume control is damaged, which significantly complicates your work with the device and you cannot solve the problem yourself, you need to contact a service center, where specialists will certainly repair the problematic ones buttons for a certain amount.

If suddenly, for some reason, it is not possible to contact the service center, everything is not so bad, Apple took care of its users here too and introduced a wonderful function - which allows you to replace the Home button at the software level, or rather assign its functions by simply pressing on the iPhone or iPad screen. The Assistive Touch menu duplicates the functionality of all the buttons on your device.

How do I enable Assistive Touch?

On your iPhone, go to Settings, then select General → Accessibility → Assistive Touch and turn on this feature.

A translucent icon will appear on the display, clicking which opens a functional menu that allows you to control the device without using the Power and Home buttons or volume control.

You can use Assistive Touch from any app, Home screen, or Lock screen. In order to use the Assistive Touch menu, you need to click on the virtual translucent key that appears on the device screen. The key can be moved to any edge of the display for convenience.

If you click on the virtual key, a menu will open, which includes:
Icon "Notification Center"- this is the usual notification center, the button is useful if the upper part of the screen stops working

The section contains a lot of useful functions:

In the Assistive Touch settings, you can replace, add and remove icons in the virtual assistant menu; to do this, go to .

Here you can expand the Assistive Touch menu and add those functions that you need, or, on the contrary, leave only those functions that you really need. This is very convenient for those who, for example, the “Power” button does not work; then you can display only the “lock screen” icon on the screen and use it to turn off and lock the screen.

As we can see, if you understand this function well, then with the help of Assistive Touch you can easily replace the shortcomings of your smartphone, because with this function you can indeed replace the lock button, the home button, the volume control and the mute and vibration key .