Where to unlock iphone 4s. Unlocking iPhone. Official Unlock of all iPhone models. Recovery without saving information

The longer and more complex the password, the more secure your iPhone is from unwanted access. But such protection can also work against you if you forget your password one day.

What to do if this happens? The main thing is not to panic: you can easily unlock your iPhone if you know how to do it.

Unlocking via iTunes

Recovery with data preservation

To reset your password while preserving all other information, open the “Devices” section in iTunes and find your iPhone in the list.

The password will be reset, and all other information will remain in place.

Recovery without saving information

If the first method fails or does not load completely, personal data will have to be sacrificed - the device settings will be reset to the state as after purchase.

• Download on your computer and update it to the latest version.
• Enter the iPhone into DFU mode: connect the device using a USB cable to the PC and turn it off by simultaneously pressing and holding the “Home” and “Power” buttons. After the screen turns off, release the "Power" button while continuing to hold "Home".
  It may take a few seconds before a message appears in the iTunes window that the connected iPhone is in recovery mode. The smartphone screen will still remain turned off.
• Click the "Restore" button in iTunes. The program will download the latest firmware and restore the iPhone. During the recovery process, a logo and a loading bar will be displayed on the device’s screen.

When the recovery is complete, the iPhone can be booted without a password.

If you previously saved a copy of your settings and personal data in iTunes, you will have the option to transfer them to your phone.

Using this method, you can unlock any version of iPhone - 4, 4s, 5 and others.

Unlock via iCloud

The next method also erases all user data from the smartphone. You can only restore them if you remember to first save a backup copy in iCould or iTunes.

To be able to unlock an iPhone through, you must first install the ““ program on the device.

Directly to remove the lock, you will need access to the Internet - on the device itself (via a SIM card or Wi-Fi) or on the computer to which it is connected.

Procedure:

• Make sure the locked iPhone has Internet access.
• From any device connected to the network, go to the “Find iPhone” application on the iCloud website and make sure that the service “sees” your device and is in “online” status (there should be a green circle opposite the iPhone model in the “All devices” section).

• Click on the icon of the locked phone and select the “Erase iPhone” option in the menu that opens.
• In the confirmation window, click the “Erase” button again.

• In the next window, enter your password and click “Done.”

After this, the process of erasing settings will begin. At this time, a loading bar and an apple will be displayed on the iPhone screen.

Important! When the erasure is complete, you can restore your personal information from the backup. The setup assistant will help you with this.

Find My iPhone will help you unlock both iPhone 6, and older models.

Unlocking iPhone after jailbreak

Both of the methods described above will most likely not suit owners of jailbroken smartphones, since they involve installing official firmware.

And this leads to the inability to connect the device to your cellular operator and the loss of other advantages of jailbreak.

Fortunately, it is possible to unlock an iPhone running iOS 5 or higher without updating the firmware using the free SemiRestore app.

The OpenSSH component must be installed on the iPhone, which can be downloaded from the Cydia store.

The SemiRestore utility is installed on a computer (the manufacturer claims support for Linux, OS X and Windows XP(SP3)-8.1 operating systems).

During the factory reset process, it deletes all personal data of the owner without losing the jailbreak.

Unlock procedure:

• Download SemiRestore from the official website and install it on your PC.
• Using a USB cable, connect your iPhone to your computer.
• Launch SemiRestore and wait for it to recognize your smartphone.
• If recognition was correct, click the “SemiRestore” button in the main utility window - this will start the process of clearing data on the iPhone.

Many users of Apple gadgets encounter various inconveniences, which are more than compensated for by the quality of the devices. One of these inconveniences may be being tied to an operator. This happens most often if you buy a device from America. If after purchase you cannot fully use all the capabilities of your IPhone 4, how to unlock it becomes the main problem.

Why is blocking needed?

There may be several reasons for blocking a gadget, but most often users encounter two of them:

1. Blocking the use of SIM cards from one operator.
2. Installing a lock using iTunes if you lose your phone.

The first case is most common, since when released in America, gadgets were often sold at the AT&T showroom on a special offer. In this case, this is a simple marketing ploy, which is convenient for those who are satisfied with the quality of the services of this operator.

Hackers all over the world puzzled over how to bypass this type of blocking. Several methods are now known. For example, the use of jailbreaks. These are hacked firmware with an alternative application store that are not approved by Apple Inc. You can find many useful utilities there. There are also alternative unlocking methods; we will look at all the possibilities in more detail below.

Alternative method to unlock Michael Capocy

The problem of IPhone 4 often arises: how to unlock it and whether it will be possible to continue using the gadget. A hacker from the Chronic Dev Team has found a solution to this problem. As follows from the video posted on the popular YouTube portal, he managed to start using a T-mobile SIM card in a couple of minutes. However, we can immediately note a significant drawback of this method - you need to have an AT&T SIM card on hand (if the lock is on it).

There are no reviews yet on whether the proposed option solved the problem of blocking the use of SIM cards from other countries, but many users tried it. Unblocking is obtained by “forgetting” the priority network. However, after the reboot, you will again need to solve the problem of how to unlock the IPhone 4. This is very inconvenient, since sometimes there is no time to complete the algorithm. We will not describe this method in detail, since we are not sure that it will work. Of course, owners of 4 have practically nothing to lose, but there is no need to aggravate the situation. If you cannot solve the problem of how to unlock iPhone 4 yourself, then you can always contact service centers, where they will definitely help you.

Using GEVEY-SIM

This device is inserted along with your SIM card. Super SIM card was tested on firmware 4.2-4.3. There are many good reviews about this method on the Internet. It was used in Russia and Ukraine and was successful in both cases.

After you turn on the phone with new maps (it is not advisable to install them hot, the gadget should not be in airplane mode when turned off), you will need to agree to the license. After this, you will see the option; you only need to dial 112 and immediately hang up (do this as soon as you see the network found). Several messages may appear indicating that the SIM card cannot be used. This is completely normal, after dialing you will only have to activate airplane mode several times, wait a little and exit it. If your network is not found, then repeat this procedure several times. As soon as your operator's name appears, the problem of how to unlock iPhone 4 is solved.

IPhone 4: how to unlock using SAM

First of all, you need to install a jailbreak on your phone and find Binger in Cydia, and SAM in the list of its packages. After which you need to install the application on your gadget. Confirm the component download list and after installation is complete, Restart Spring Board.

The installation must be done via Wi-Fi. After you upload a new application to your gadget, insert your SIM card. Launch SAMPrefs. Set Method to Auto Detect. Search for a network using the utilities button. If after this the block has not been removed, then set the operator manually. To do this, install By Country and Carrier in the application and select your country and telecom operator. Next, you will need to activate your device with the new settings.

What should those who changed the firmware to IOS 7.1.2 do?

Many of those who previously managed to solve the problem of IPhone 4 (how to unlock) on the firmware after the update were in for an unpleasant surprise. The phone stopped working with the network and needed to be unlocked again. Jailbreaks and reverse firmware changes do not help, since the modem software version has been updated along with the rest of the operating system and cannot be rolled back.

Miracles, friends, do happen. Holders locked iPhone 4S (or iPhone 4/3GS) I was incredibly lucky today.

One of the members of the hacker team Chronic Dev Team Michael Capocy(Michael Capozzi) found a loophole with which you can easily unlock all three generations of iPhones that were locked to an operator. Without GEVEY-SIM. No jailbreak. Definitely miracles.

Michael claims that with a couple of clever steps, he was able to activate a T-Mobile SIM card on an iPhone 4S that was linked to the American mobile giant AT&T. The same trick should theoretically work with the iPhone 4/3GS. No one guarantees that the same method will work for owners of phones linked to operators in other countries. If you have a “brick” in your hands and, in principle, there is nothing else to do, then let’s get started.

To unlock you will need SIM card of the operator to which the phone was linked, SIM card of your operator, iPaper and a little patience.

The process of unlocking iPhone 4S on iOS 5

The procedure is as follows:

1. Insert AT SIM card into iPhone
2. We dial 611 (this is the AT&T customer support service) and immediately hang up the call after dialing;
3. Turn on airplane mode;
4. Take out the AT&T SIM card and insert the SIM card of your operator;
5. Make sure Wi-Fi is turned off. In your network settings, you can also tap on the “Forget this network” option so that your smartphone does not connect to it automatically;
6. Turn off Airplane mode and the iPhone will start searching for the network. An “Activation Required” notification will appear on the screen.
7. Here you should see EDGE activated - the letter E will appear in the upper left corner of the screen;
8. After that, wait 20-30 seconds and feel free to turn off your phone;
9. Now turn on your iPhone. You will again see a message on the screen of your device indicating that activation is required.
10. After you see one signal strength bar, tap on “Use a cellular network connection” (or Use Cellular Connection if the phone menu is in English);
11. Now we take out the SIM card and again look at the window with the inscription “Activation required”;
12. We insert your operator's SIM card back and... UNLOCKED! iPhone 4S unlocked!

Important! Please note that after rebooting the device you will have to perform all the above steps again. In addition, if this unlocking method turns out to be fully functional, there is a possibility that scammers will appear who, under the guise of non-verlockers, will sell locked devices. Be careful, reboot your phones.

Chinese developer Loktar Sun presented a method for unlocking a jailbroken iPhone based on a new ICCID vulnerability. The SAM (Subscriber Artificial Module) technique allows you to unlock iPhone 4S and iPhone 4, which are contractually bound to cellular operators and have any version of baseband, including unlocking iPhone 4 with modem 11/04/08.

The SAM method was tested by the leader of the hacker group iPhone Dev Team with the nickname MuscleNerd, who confirmed its 100% efficiency. He unlocked an iPhone 4S locked to the American provider T-Mobile. Users also report successful unlocking of iPhones with modem firmware 04.11.08, 02.10.04, 04.10.01, 04.12.01, 1.0.13, 1.0.14 and 1.0.11 using this method.

It is worth noting that this method has one significant drawback: unlocked devices can only be used with one SIM card - hot swapping of SIM cards is not provided. Therefore, iPhone owners tied to AT&T are recommended to unlock contract devices using the official method. You can find out more by going.

Notes:

• SAM does not drain your iPhone's battery faster and supports push notifications like officially activated iPhones.
• Requires iPhone 4S, iPhone 4 or iPhone 3GS with jailbreak, which can be activated through iTunes running iOS 5.0 or higher.
• Requires the latest version of iTunes and internet connection.
• You must know the mobile operator to which your iPhone is locked.

The new unlock method is very non-trivial and has 13 steps. In the near future, Loktar Sun promises to release an update to simplify the procedure. Below are instructions for unlocking iPhone 4S and iPhone 4 using SAM.

How to unlock iPhone 4S and iPhone 4:

Step 1: Jailbreak iOS 5.0.1 / iOS 5.0 on Windows and Mac OS X using Redsn0w according to the instructions published by . For iPhone 4S users on iOS 5.0.1 – Absinthe. Tethered jailbreak of iOS 5.1 for iPhone 4, 3GS, iPad 1 and iPod touch is possible using Sn0wbreeze or Redsn0w.

Step 2: After jailbreaking, launch Cydia and add a new repository http://repo.bingner.com.

Step 3: Open search in Cydia and search for and install SAM. Respring.

Step 4: Launch SAM from the home screen and from the Utilities menu, click De-Activate iPhone. The ActivationState in the More Information section should be Unactivated.

Step 5: Select the “By Country and Carrier” option and find the name of the cellular operator to which your iPhone is locked.

Step 6: Open the “More Information” section, copy or write down the IMSI parameter in the “SAM Details” item, then click on the “Spoof Real SIM to SAM” button.

Step 7: Go back to the main SAM screen and change “Method” to Manual. Copy from the clipboard or enter the IMSI saved in step 6.

Step 8: Connect your iPhone to iTunes and wait until the program issues a new certificate for your smartphone. On the main screen of your smartphone in iTunes, look at the ICCID parameter, it should match your SIM card. If not, go through the instructions from the beginning.

Step 9: Turn off your smartphone and close iTunes.

Step 10: Turn off SAM.

Step 11: Connect iPhone to iTunes again. The program will display an error stating that it cannot activate the iPhone. This is normal, close iTunes and open it again.

Step 12: You should now see an operator signal in the status bar. Congratulations, you have unlocked your iPhone 4/4S.

Step 13: If push notifications do not work for you after completing the procedure, use the “clear push” button in the SAM application by connecting your iPhone to iTunes.

Today, the American smartphone iPhone is one of the most in-demand and, therefore, popular mobile devices. And this is understandable, because this gadget is distinguished by its high quality, ability to solve many problems, and most importantly, simplicity. And if for American and European users there are almost no disadvantages to the iPhone 5s, then here in the CIS countries things are worse.

Some iPhone models are only tied to a specific mobile operator. As a result, the owner of the gadget cannot use the services of other operators. But this problem also has a solution, which is called “unlocking”.

iPhone unlocking is performed in various service centers and workshops. But you can also do this yourself. We suggest you read the instructions that will help you with this procedure and help you unlock your iPhone 5s.

What is unlocking and how to eliminate the disadvantage of the gadget?

iPhone unlocking is an important process that helps solve the "one carrier" problem. It also helps if the iPhone does not see the SIM card. What stages does this operation include? The first step to unlocking is to install the well-known Jailbreak.

This utility allows the user to gain access to full control of the phone. In addition, Jailbreak helps in installing themes for the iOS operating system, other shortcuts, screen swipe options, and colors. And this program will also help us unlock iPhone 5s.

The second step is to install the UltraSnow application, with the help of which the iPhone is unlocked - the block on the functioning of other mobile operators is removed. The unpleasant thing is that the program may not work on all new firmware, since the protection is constantly being improved and you have to wait for the Ultra Snow update to unlock your iPhone on the new version of iOS.

The gadget can also be unlocked using a program called Turbo SIM. The use of this program affects the settings of the chip that is responsible for receiving mobile networks. If we compare this program with Ultra Snow, then the unlocking stops after the iPhone 5s is rebooted.

Therefore, you will have to activate the Turbo SIM program again. After the Turbo SIM program is successfully installed, the smartphone will no longer “recognize” its native SIM card. You shouldn’t be afraid of this, you just need to select the “Emergency call” option and dial 112. After these steps, your native SIM card will be activated.

What are the advantages of Turbo SIM:

• There is no connection to the operating system firmware version;
• Allows you to work with any firmware version;
• A locked iPhone requires software to unlock the gadget.

Disadvantages of Turbo SIM:

• If your mobile operator does not support the “emergency call” feature, then it is better not to start unlocking the iPhone 5s;
• You need to constantly repeat the activation process when the network disappears or the phone reboots.

For example, if you don’t know how to unlock an iPhone 4, then this program will definitely suit you. And if you are the owner of older versions of the smartphone (3g, 3gs), then you will have to try to solve the problem with the help of Ultra Snow. An unlocked iPhone works exactly the same as before the unlock, no software defects appear.

Official iPhone unlocking or how to unlock your gadget without defects

Now the cellular operator can be officially unlocked using Apple settings. And this can be done remotely. After unlocking, the smartphone will not have any defects, and you will be able to fully use the iPhone. Remote unlocking occurs using the gadget's IMEI number, through databases, Apple services and the operator whose iPhone 5s is in a locked state.

But it's not always possible to unlock your iPhone 5s. There are many mobile operators in the world to which it is fashionable to link your phone. And each of them has its own rules, under which the operator can safely forget about the contract.

For example, in Germany, mobile operators Movistar, Vodafone and T-mobile allow you to unlock your phone only after 2 years. After officially unlocking the iPhone 5s operator, you need to connect the smartphone to a personal computer via iTunes. The communicator itself will contact the database, and after several updates a letter will appear on the computer monitor with the text “Your iPhone has been successfully unlocked.

Full unlocking of iPhone 5s includes fixing a problem called “one carrier”. Of course, you can do the unlocking yourself, but you need to be friends with the programs mentioned above, and also strictly follow the procedure. If you don’t have time to deal with your iPhone5s, then you can always entrust this work to professionals from the service center, who will do everything efficiently, for a decent amount.